ITS4035SEPDXUMA1 vs BTS70402EPGXUMA1 Comparison
Detailed side-by-side comparison of ITS4035SEPDXUMA1 by Infineon and BTS70402EPGXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
ITS4035SEPDXUMA1
ITS4035SEPDXUMA1 - 35mΞ© Smart High-Side Switch 13.2A | Infineon
ITS4035SEPDXUMA1 β ActiveInfineon
BTS70402EPGXUMA1
BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon
BTS70402EPGXUMA1 β ActiveSpecification Comparison
| Parameter | ITS4035SEPDXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.31 | $3.18 |
| Switch Type | Single-channel Smart High-Side Power Switch | β |
| Topology | 1:1 N-Channel MOSFET | β |
| RDS(ON) (typical) | 35 mΞ© at 25 Β°C | β |
| Continuous Output Current | 13.2 A | β |
| Current Limit (programmable) | 3 A to 13.2 A | β |
| Operating Supply Voltage (Vbb) | 5 V to 28 V | β |
| Logic-Level Input (IN) | Active high, CMOS/TTL compatible | β |
| Status Output (ST) | Open-drain diagnostic flag | β |
| Protection Features | Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Ground-Loss, Reverse Polarity | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Operating Temperature Range | -40 Β°C to +150 Β°C | -40 Β°C to +150 Β°C junction |
| Package | PG-TSDSO-14 (Exposed Pad) | PG-TSDSO-14 (exposed thermal pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Family | PROFETβ’ Industrial | β |
| MSL Level | [DATA_NEEDED: MSL level] | β |
| RoHS Status | Compliant | β |
| Manufacturer | β | Infineon Technologies |
| Part Family | β | PROFET+2 (BTS70xxx series) |
| Function | β | Smart High-Side Power Switch |
| Number of Channels | β | 4 |
| Output Configuration | β | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | β | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | β | 65 mOhm typical |
| Operating Voltage Range | β | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | β | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | β | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | β | Qualified (automotive grade) |
| RoHS Compliance | β | Compliant |