SP485E vs SP485ECP-L Comparaison
Comparaison détaillée côte à côte de SP485E par MaxLinear et SP485ECP-L par Exar Corporation. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ ActifExar Corporation
SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication
SP485ECP-L ✓ ActifComparaison des spécifications
| Paramètre | SP485E | SP485ECP-L |
|---|---|---|
| Marque | MaxLinear | Exar Corporation |
| Catégorie | Interface ICs | RS-485 Transceivers |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-485, RS-422 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half-duplex | — |
| Débit de données | 2.5 Mbps (max, SP485E non-slew-limited) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Receiver Input Sensitivity | ±200 mV | — |
| Receiver Input Impedance | 12 kΩ minimum, 15 kΩ typical | — |
| Common-Mode Range | −7 V to +12 V | — |
| ESD Protection (HBM) | ±15 kV | — |
| ESD Protection (IEC 61000-4-2 Air Discharge) | ±15 kV | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature] | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin NSOIC or PDIP | [DATA_NEEDED: exact package and pin count] |
| Type de montage | Surface Mount (NSOIC) or Through-Hole (PDIP) | Surface Mount |
| Process Technology | BiCMOS | — |
| Failsafe Receiver | Yes (open, shorted, idle bus) | — |
| Tri-State Enable Pins | Yes (DE, RE) | — |
| Statut RoHS | Compliant | unknown |
| Product Type | — | RS-485 transceiver |
| Number of Channels | — | 1 channel |
| Interface Standard | — | RS-485 |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Bus Load Current | — | [DATA_NEEDED: bus load current] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | unknown |
| Lead-Free Status | — | unknown |
| Halogen-Free Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Manufacturer | — | Exar |