SP485E vs SP485ECP-L 비교

다음의 상세 나란히 비교: SP485E 제조: MaxLinear 및 SP485ECP-L 제조: Exar Corporation. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 SP485E SP485ECP-L
브랜드 MaxLinear Exar Corporation
카테고리 Interface ICs RS-485 Transceivers
수명 주기 상태 활성 활성
기능 Transceiver —
Protocol RS-485, RS-422 —
Number of Drivers/Receivers 1/1 —
Duplex Half-duplex —
데이터 속도 2.5 Mbps (max, SP485E non-slew-limited) —
Supply Voltage (VCC) 4.75 V to 5.25 V —
Receiver Input Sensitivity ±200 mV —
Receiver Input Impedance 12 kΩ minimum, 15 kΩ typical —
Common-Mode Range −7 V to +12 V —
ESD Protection (HBM) ±15 kV —
ESD Protection (IEC 61000-4-2 Air Discharge) ±15 kV —
동작 온도 범위 [DATA_NEEDED: operating temperature] [DATA_NEEDED: operating temperature range]
패키지 8-pin NSOIC or PDIP [DATA_NEEDED: exact package and pin count]
실장 유형 Surface Mount (NSOIC) or Through-Hole (PDIP) Surface Mount
Process Technology BiCMOS —
Failsafe Receiver Yes (open, shorted, idle bus) —
Tri-State Enable Pins Yes (DE, RE) —
RoHS 상태 Compliant unknown
Product Type — RS-485 transceiver
Number of Channels — 1 channel
Interface Standard — RS-485
공급 전압 — [DATA_NEEDED: supply voltage]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Differential Output Voltage — [DATA_NEEDED: differential output voltage]
Receiver Sensitivity — [DATA_NEEDED: receiver sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Bus Load Current — [DATA_NEEDED: bus load current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — unknown
Lead-Free Status — unknown
Halogen-Free Status — unknown
AEC-Q100 Qualification — not_applicable
Manufacturer — Exar

데이터시트 & 자료

SP485ECP-L

사용 가능한 데이터시트 없음

전체 제품 상세 보기 →

모든 제품 보기 BOM 생성 견적 요청