SP485E vs SP485ECP-L 比較

詳細な並列比較: SP485E メーカー: MaxLinear および SP485ECP-L メーカー: Exar Corporation。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Exar Corporation
SP485ECP-L SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication

SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication

SP485ECP-L ✓ 生産中

仕様比較

パラメータ SP485E SP485ECP-L
ブランド MaxLinear Exar Corporation
カテゴリ Interface ICs RS-485 Transceivers
ライフサイクル状態 有効 有効
機能 Transceiver —
Protocol RS-485, RS-422 —
Number of Drivers/Receivers 1/1 —
Duplex Half-duplex —
データレート 2.5 Mbps (max, SP485E non-slew-limited) —
Supply Voltage (VCC) 4.75 V to 5.25 V —
Receiver Input Sensitivity ±200 mV —
Receiver Input Impedance 12 kΩ minimum, 15 kΩ typical —
Common-Mode Range −7 V to +12 V —
ESD Protection (HBM) ±15 kV —
ESD Protection (IEC 61000-4-2 Air Discharge) ±15 kV —
動作温度範囲 [DATA_NEEDED: operating temperature] [DATA_NEEDED: operating temperature range]
パッケージ 8-pin NSOIC or PDIP [DATA_NEEDED: exact package and pin count]
実装タイプ Surface Mount (NSOIC) or Through-Hole (PDIP) Surface Mount
Process Technology BiCMOS —
Failsafe Receiver Yes (open, shorted, idle bus) —
Tri-State Enable Pins Yes (DE, RE) —
RoHS ステータス Compliant unknown
Product Type — RS-485 transceiver
Number of Channels — 1 channel
Interface Standard — RS-485
電源電圧 — [DATA_NEEDED: supply voltage]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Differential Output Voltage — [DATA_NEEDED: differential output voltage]
Receiver Sensitivity — [DATA_NEEDED: receiver sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Bus Load Current — [DATA_NEEDED: bus load current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — unknown
Lead-Free Status — unknown
Halogen-Free Status — unknown
AEC-Q100 Qualification — not_applicable
Manufacturer — Exar

データシート&リソース

SP485ECP-L

データシートはありません

製品の詳細をすべて見る →

すべての製品を閲覧 BOMを作成 見積もり依頼