SP485E vs SP485ECP-L 比較

詳細並排比較 SP485E 由 MaxLinear 與 SP485ECP-L 由 Exar Corporation. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Exar Corporation
SP485ECP-L SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication

SP485ECP-L - RS-485 Transceiver | Exar | Industrial Communication

SP485ECP-L ✓ 啟用中

規格比較

參數 SP485E SP485ECP-L
品牌 MaxLinear Exar Corporation
類別 Interface ICs RS-485 Transceivers
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-485, RS-422 —
Number of Drivers/Receivers 1/1 —
Duplex Half-duplex —
資料速率 2.5 Mbps (max, SP485E non-slew-limited) —
Supply Voltage (VCC) 4.75 V to 5.25 V —
Receiver Input Sensitivity ±200 mV —
Receiver Input Impedance 12 kΩ minimum, 15 kΩ typical —
Common-Mode Range −7 V to +12 V —
ESD Protection (HBM) ±15 kV —
ESD Protection (IEC 61000-4-2 Air Discharge) ±15 kV —
工作溫度範圍 [DATA_NEEDED: operating temperature] [DATA_NEEDED: operating temperature range]
封裝 8-pin NSOIC or PDIP [DATA_NEEDED: exact package and pin count]
安裝類型 Surface Mount (NSOIC) or Through-Hole (PDIP) Surface Mount
Process Technology BiCMOS —
Failsafe Receiver Yes (open, shorted, idle bus) —
Tri-State Enable Pins Yes (DE, RE) —
RoHS 狀態 Compliant unknown
Product Type — RS-485 transceiver
Number of Channels — 1 channel
Interface Standard — RS-485
供應電壓 — [DATA_NEEDED: supply voltage]
Maximum Data Rate — [DATA_NEEDED: maximum data rate]
Differential Output Voltage — [DATA_NEEDED: differential output voltage]
Receiver Sensitivity — [DATA_NEEDED: receiver sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
Bus Load Current — [DATA_NEEDED: bus load current]
ESD Protection — [DATA_NEEDED: ESD protection rating]
REACH Status — unknown
Lead-Free Status — unknown
Halogen-Free Status — unknown
AEC-Q100 Qualification — not_applicable
Manufacturer — Exar

資料表與資源

SP485ECP-L

尚無資料表

檢視完整產品詳情 →

瀏覽所有產品 建立 BOM 索取報價