TUSB212RWBR vs TUSB212RWBT Comparaison
Comparaison détaillée côte à côte de TUSB212RWBR par Texas Instruments et TUSB212RWBT par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR ✓ ActifTexas Instruments
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT ✓ ActifComparaison des spécifications
| Paramètre | TUSB212RWBR | TUSB212RWBT |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | USB 2.0 High-Speed Signal Conditioner | USB 2.0 high-speed signal conditioner |
| Supported USB Speed | USB 2.0 High-Speed | — |
| Signal Compensation Function | Programmable AC boost and DC boost | — |
| Target Signal Distortion | Intersymbol interference from transmission-channel loss | — |
| Low-Speed Behavior | Unaffected by the High-Speed compensation | — |
| Full-Speed Behavior | Unaffected by the High-Speed compensation | — |
| USB On-The-Go Compatibility | Compatible | — |
| Boîtier | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN |
| Type de montage | Surface Mount | Surface mount |
| Nombre de broches | 12 pins | — |
| Production Data Marking | PRODUCTION DATA | — |
| Manufacturer Document Revision | Revision A, September 2017 | — |
| Plage de tension d'entrée | [DATA_NEEDED: input voltage range] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Maximum Data Rate | 480 Mb/s | — |
| AC Boost Range | [DATA_NEEDED: programmable AC boost range] | — |
| DC Boost Range | [DATA_NEEDED: programmable DC boost range] | — |
| Courant d'alimentation | [DATA_NEEDED: operating supply current] | — |
| Statut RoHS | Compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| USB Version | — | USB 2.0 |
| Supported USB Speeds | — | Low-Speed, Full-Speed, and High-Speed |
| Compatibility | — | USB 2.0, OTG 2.0, and BC 1.2 |
| Maximum Pre-Channel Length | — | 5 m |
| Maximum Post-Channel Length | — | 2 m |
| AC Boost Configuration | — | Four selectable settings |
| Configuration Interface | — | Pin strap or I2C |
| Differential Pair Handling | — | D1P/M and D2P/M interchangeable |
| Host Device Role | — | Host and device agnostic |
| Gain Architecture | — | Selectable gain with daisy-chain support |
| Correction Function | — | Intersymbol interference compensation |
| Package Dimensions | — | 1.6 mm x 1.6 mm |
| Statut du cycle de vie | — | Active |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |
| Maximum USB Data Rate | — | [DATA_NEEDED: Maximum USB data rate] |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |
| I2C Address | — | [DATA_NEEDED: I2C address] |