TUSB212RWBR vs TUSB212RWBT Karşılaştırma
Ayrıntılı yan yana karşılaştırma TUSB212RWBR tarafından Texas Instruments ve TUSB212RWBT tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR ✓ AktifTexas Instruments
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT ✓ AktifÖzellik Karşılaştırması
| Parametre | TUSB212RWBR | TUSB212RWBT |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | USB 2.0 High-Speed Signal Conditioner | USB 2.0 high-speed signal conditioner |
| Supported USB Speed | USB 2.0 High-Speed | — |
| Signal Compensation Function | Programmable AC boost and DC boost | — |
| Target Signal Distortion | Intersymbol interference from transmission-channel loss | — |
| Low-Speed Behavior | Unaffected by the High-Speed compensation | — |
| Full-Speed Behavior | Unaffected by the High-Speed compensation | — |
| USB On-The-Go Compatibility | Compatible | — |
| Paket | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN |
| Montaj Türü | Surface Mount | Surface mount |
| Pin Sayısı | 12 pins | — |
| Production Data Marking | PRODUCTION DATA | — |
| Manufacturer Document Revision | Revision A, September 2017 | — |
| Giriş电压范围 | [DATA_NEEDED: input voltage range] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Maximum Data Rate | 480 Mb/s | — |
| AC Boost Range | [DATA_NEEDED: programmable AC boost range] | — |
| DC Boost Range | [DATA_NEEDED: programmable DC boost range] | — |
| Besleme Akımı | [DATA_NEEDED: operating supply current] | — |
| RoHS Durumu | Compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| USB Version | — | USB 2.0 |
| Supported USB Speeds | — | Low-Speed, Full-Speed, and High-Speed |
| Compatibility | — | USB 2.0, OTG 2.0, and BC 1.2 |
| Maximum Pre-Channel Length | — | 5 m |
| Maximum Post-Channel Length | — | 2 m |
| AC Boost Configuration | — | Four selectable settings |
| Configuration Interface | — | Pin strap or I2C |
| Differential Pair Handling | — | D1P/M and D2P/M interchangeable |
| Host Device Role | — | Host and device agnostic |
| Gain Architecture | — | Selectable gain with daisy-chain support |
| Correction Function | — | Intersymbol interference compensation |
| Package Dimensions | — | 1.6 mm x 1.6 mm |
| Yaşam Döngüsü Durumu | — | Active |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |
| Maximum USB Data Rate | — | [DATA_NEEDED: Maximum USB data rate] |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |
| I2C Address | — | [DATA_NEEDED: I2C address] |