TUSB212RWBR vs TUSB212RWBT Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci TUSB212RWBR disebabkan oleh Texas Instruments dan TUSB212RWBT disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR ✓ AktifTexas Instruments
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT ✓ AktifPengandingan Spesifikasi
| Parametr | TUSB212RWBR | TUSB212RWBT |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | USB 2.0 High-Speed Signal Conditioner | USB 2.0 high-speed signal conditioner |
| Supported USB Speed | USB 2.0 High-Speed | — |
| Signal Compensation Function | Programmable AC boost and DC boost | — |
| Target Signal Distortion | Intersymbol interference from transmission-channel loss | — |
| Low-Speed Behavior | Unaffected by the High-Speed compensation | — |
| Full-Speed Behavior | Unaffected by the High-Speed compensation | — |
| USB On-The-Go Compatibility | Compatible | — |
| Kemasan | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN |
| Jenis Pemasangan | Surface Mount | Surface mount |
| Kiraan Pin | 12 pins | — |
| Production Data Marking | PRODUCTION DATA | — |
| Manufacturer Document Revision | Revision A, September 2017 | — |
| Gambaran Tegangan Masukan | [DATA_NEEDED: input voltage range] | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Maximum Data Rate | 480 Mb/s | — |
| AC Boost Range | [DATA_NEEDED: programmable AC boost range] | — |
| DC Boost Range | [DATA_NEEDED: programmable DC boost range] | — |
| Arus Pemberi Arus | [DATA_NEEDED: operating supply current] | — |
| Status RoHS | Compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| USB Version | — | USB 2.0 |
| Supported USB Speeds | — | Low-Speed, Full-Speed, and High-Speed |
| Compatibility | — | USB 2.0, OTG 2.0, and BC 1.2 |
| Maximum Pre-Channel Length | — | 5 m |
| Maximum Post-Channel Length | — | 2 m |
| AC Boost Configuration | — | Four selectable settings |
| Configuration Interface | — | Pin strap or I2C |
| Differential Pair Handling | — | D1P/M and D2P/M interchangeable |
| Host Device Role | — | Host and device agnostic |
| Gain Architecture | — | Selectable gain with daisy-chain support |
| Correction Function | — | Intersymbol interference compensation |
| Package Dimensions | — | 1.6 mm x 1.6 mm |
| Status Lingkungan Hidup | — | Active |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |
| Maximum USB Data Rate | — | [DATA_NEEDED: Maximum USB data rate] |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |
| I2C Address | — | [DATA_NEEDED: I2C address] |