TUSB212RWBR vs TUSB212RWBT Comparação
Comparação detalhada lado a lado de TUSB212RWBR por Texas Instruments e TUSB212RWBT por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
TUSB212RWBR - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBR ✓ AtivoTexas Instruments
TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB212RWBT ✓ AtivoComparação de especificações
| Parâmetro | TUSB212RWBR | TUSB212RWBT |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | USB 2.0 High-Speed Signal Conditioner | USB 2.0 high-speed signal conditioner |
| Supported USB Speed | USB 2.0 High-Speed | — |
| Signal Compensation Function | Programmable AC boost and DC boost | — |
| Target Signal Distortion | Intersymbol interference from transmission-channel loss | — |
| Low-Speed Behavior | Unaffected by the High-Speed compensation | — |
| Full-Speed Behavior | Unaffected by the High-Speed compensation | — |
| USB On-The-Go Compatibility | Compatible | — |
| Encapsulamento | 12-X2QFN (1.6 mm x 1.6 mm) | 12-X2QFN |
| Tipo de montagem | Surface Mount | Surface mount |
| Contagem de pinos | 12 pins | — |
| Production Data Marking | PRODUCTION DATA | — |
| Manufacturer Document Revision | Revision A, September 2017 | — |
| Faixa de tensão de entrada | [DATA_NEEDED: input voltage range] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: Operating temperature range] |
| Maximum Data Rate | 480 Mb/s | — |
| AC Boost Range | [DATA_NEEDED: programmable AC boost range] | — |
| DC Boost Range | [DATA_NEEDED: programmable DC boost range] | — |
| Corrente de alimentação | [DATA_NEEDED: operating supply current] | — |
| Status RoHS | Compliant | Compliant |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| USB Version | — | USB 2.0 |
| Supported USB Speeds | — | Low-Speed, Full-Speed, and High-Speed |
| Compatibility | — | USB 2.0, OTG 2.0, and BC 1.2 |
| Maximum Pre-Channel Length | — | 5 m |
| Maximum Post-Channel Length | — | 2 m |
| AC Boost Configuration | — | Four selectable settings |
| Configuration Interface | — | Pin strap or I2C |
| Differential Pair Handling | — | D1P/M and D2P/M interchangeable |
| Host Device Role | — | Host and device agnostic |
| Gain Architecture | — | Selectable gain with daisy-chain support |
| Correction Function | — | Intersymbol interference compensation |
| Package Dimensions | — | 1.6 mm x 1.6 mm |
| Status do ciclo de vida | — | Active |
| Supply Voltage Range | — | [DATA_NEEDED: Supply voltage range] |
| Maximum USB Data Rate | — | [DATA_NEEDED: Maximum USB data rate] |
| Propagation Delay | — | [DATA_NEEDED: Propagation delay] |
| I2C Address | — | [DATA_NEEDED: I2C address] |