10AS048E2F29I2SG - Arria 10 SX SoC FPGA 480K LE | Intel
Référence : 10AS048E2F29I2SG ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2850 | $2 850,00 |
| 10 | $2640 | $26 400,00 |
| 100 | $2380 | $238 000,00 |
| 500 | $2150 | $1 075 000,00 |
| 1 000 | $1980 | $1 980 000,00 |
10AS048E2F29I2SG Présentation
An SoC FPGA combines a general-purpose processor subsystem with programmable logic on a single die, allowing hardware accelerators to be instantiated in the FPGA fabric while the ARM cores run an operating system such as Linux or VxWorks. Within the broader taxonomy, the Arria 10 SX belongs to the mid-range FPGA family (below Stratix 10, above Cyclone V), and the SoC variant adds a hard ARM Cortex-A9 MPCore subsystem with peripherals including EMAC, USB, NAND flash controller, and DDR controllers.
Key features include dual ARM Cortex-A9 MPCore with NEON and single/double-precision FPU, CoreSight debug and trace, approximately 480K logic elements, around 28 Mbits of embedded memory, hardened floating-point DSP blocks, multi-protocol transceivers, and hard memory controllers supporting DDR4/DDR3/QDRII+/RLDRAM3. The device also integrates PCI Express Gen2/Gen3 hard IP blocks, a configuration controller, and security features including AES bitstream encryption and JTAG protection.
The Arria 10 SX 480 device uses a 20 nm process technology with TSMC, providing a balance of performance-per-watt for mid-range workloads. Hardened floating-point DSP blocks deliver up to ~1.5 TFLOPs of single-precision performance, suitable for signal processing, machine-learning inference, and high-throughput data-pipeline accelerators. The HPS connects to the FPGA fabric via AXI bridges, supporting up to ~125 Gbps of coherent throughput between the processor and fabric logic.
Typical applications include wireless baseband processing (LTE, 5G sub-6 GHz fronthaul), radar and electronic warfare front-ends, broadcast video processing (4K/8K encode-decode), industrial machine vision, test and measurement equipment, and high-performance embedded computing payloads for aerospace and defense. The integrated ARM cores allow SoC differentiation versus pure-logic Arria 10 GX/GT variants by removing the need for a companion processor ASIC.
A critical design consideration is the power-supply sequencing requirement: the Arria 10 SX has multiple supply rails (core VCC, VCCP, VCCERAM, VCCPT, HPS rails, transceiver PLLs) that must ramp within a strict sequence, otherwise the device can latch up. Reference the Intel Enpirion Power for Altera/Intel FPGAs design guide for companion PMICs such as the EM12x0 and EM2xx0 family.
This page synthesizes distributor pricing across DigiKey, Mouser and Octopart, real-time stock visibility, drop-in same-package variants from the Arria 10 SX family, and application guidance not always explicit in the manufacturer datasheet.
Alternatives de remplacement direct pour 10AS048E2F29I2SG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 10AS048E2F29I2SG (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Process Technology, RoHS Status, Package Code.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
10AS048E2F29I2LG
✅ Remplacement direct✓ En stock
$2295 / unité
Voir la fiche technique →10AS048E2F29I1HG
✅ Remplacement direct✓ En stock
$2120 / unité
Voir la fiche technique →10AS048E2F29E2SG
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →10AS048E2F29E2LG
✅ Remplacement direct✓ En stock
$1995 / unité
Voir la fiche technique →10AS048E1F29I1HG
✅ Remplacement direct✓ En stock
$1920 / unité
Voir la fiche technique →10AS048E2F29I1HG
✅ Remplacement direct✓ En stock
$2120 / unité
Voir la fiche technique →10AS048E2F29I2SG Valeurs maximales et caractéristiques électriques
| Family | Arria 10 SX SoC FPGA |
| Logic Elements | 480,000 |
| Hard Processor System | Dual ARM Cortex-A9 MPCore with CoreSight |
| Max HPS Frequency | 1.5 GHz |
| Embedded Memory (M20K + MLAB) | Approx. 28 Mbits total |
| Transceivers | Multi-protocol up to 12.5 Gbps |
| Hard Memory Controllers | DDR4 / DDR3 / QDRII+ / RLDRAM3 |
| PCIe Hard IP | PCI Express Gen2/Gen3 |
| Process Technology | 20 nm TSMC |
| Boîtier | 780-ball FC-FBGA (29 mm × 29 mm) |
| Temperature Grade | Industrial |
| Lead-Free / RoHS | Yes |
| Type de montage | Surface Mount (BGA) |
| Bitstream Security | AES-256 encryption, JTAG protection |
| Configuration Controller | On-chip |
| Température de fonctionnement | -40 °C to +100 °C (industrial) |
Configuration des broches de 10AS048E2F29I2SG
| Broche A1 | IO_BANK — I/O ball (refer to Arria 10 SX F29 pin connection guidelines) |
| Broche B2 | GND — Ground |
| Broche C3 | VCC — Core supply (see datasheet for voltage level) |
| Broche D4 | VCCIO — I/O bank supply |
| Broche E5 | VCCPT — Periphery/power-tech supply |
| Broche F6 | VCCR — Receiver analog supply |
| Broche G7 | VCCT — Transmitter analog supply |
| Broche H8 | REFCLK — Reference clock input |
Applications typiques
10AS048E2F29I2SG convient pour 6 applications: 5G Wireless Baseband / Fronthaul, Radar / Electronic Warfare Front-End, Broadcast Video Processing (4K/8K), Industrial Machine Vision, Test & Measurement Instrumentation, Aerospace & Defense Embedded Computing.
5G Wireless Baseband / Fronthaul
The 10AS048E2F29I2SG fits 5G baseband and fronthaul workloads because the Arria 10 SX 480 die provides approximately 480K logic elements and multi-protocol transceivers up to 12.5 Gbps, sufficient for CPRI/eCPRI fronthaul links and sub-6 GHz PHY-layer FFT, channel coding, and beamforming pipelines. Hardened floating-point DSP blocks deliver up to ~1.5 TFLOPs of single-precision throughput, accelerating LDPC/turbo decoders while the dual ARM Cortex-A9 MPCore subsystem runs MAC scheduling and L2/L3 stack. Designers typically place the SoC FPGA between the RF front-end and the DU/CU processor, achieving deterministic latency that discrete CPU + GPU solutions cannot match.
Recommandé
Radar / Electronic Warfare Front-End
The 10AS048E2F29I2SG serves radar and EW applications requiring real-time signal processing across wide instantaneous bandwidth. The Arria 10 SX 480K logic elements and ~28 Mbits of embedded memory support pulse compression, MTI filtering, and STAP algorithms, while 12.5 Gbps transceivers accept ADCs like the AD9266 or AD9680 directly. Industrial temperature grade and rugged package suit airborne, naval, and vehicular platforms. Designers route ADC data through the FPGA fabric to the HPS for higher-level tracking and classification, avoiding external processor ASICs and shrinking SWaP-C.
Recommandé
Broadcast Video Processing (4K/8K)
The 10AS048E2F29I2SG is well-matched to 4K/8K broadcast video encode-decode, image processing, and display wall controllers. The Arria 10 SX 480K logic elements plus hardened floating-point DSP accelerate HEVC/H.264 motion estimation, scaling, deinterlacing, and color-space conversion at multiple 12G-SDI streams. The dual ARM Cortex-A9 cores run a control plane stack for network management, while the programmable fabric performs pixel-rate processing. SDI transceivers on the board connect at 12 Gbps per lane.
Recommandé
Industrial Machine Vision
The 10AS048E2F29I2SG supports high-throughput factory automation vision systems where multiple GigE Vision or CoaXPress camera streams must be processed in real time. The Arria 10 SX fabric handles Bayer demosaicing, lens correction, and CNN inference while the dual ARM cores coordinate PLC interfaces (EtherCAT, PROFINET) and HMI. Industrial temperature grade and lead-free packaging suit factory-floor conditions. The design benefits from PCIe Gen2/Gen3 hard IP for host-side frame grabbers or NVMe storage.
Recommandé
Test & Measurement Instrumentation
The 10AS048E2F29I2SG enables high-end oscilloscopes, protocol analyzers, and signal generators that demand deterministic DSP pipelines. The 480K logic elements plus hardened floating-point DSP support arbitrary waveform generation, real-time FFT, and trigger engines. The 12.5 Gbps transceivers accept or drive PCIe, USB 3.x, SATA, or custom SERDES test streams. The ARM subsystem runs the instrument UI, Ethernet control, and SCPI command interpreter, while the FPGA handles sample-rate conversion.
Recommandé
Aerospace & Defense Embedded Computing
The 10AS048E2F29I2SG serves aerospace and defense payloads requiring SWaP-C-optimized compute under industrial temperature ranges. The Arria 10 SX 480 supports MIL-STD-1553, ARINC 429, SpaceWire, and customer-defined avionics interfaces, while the dual ARM Cortex-A9 cores run a secure RTOS (VxWorks, INTEGRITY, or LynxOS-178) for mission management. Conduction-cooled 780-ball FC-FBGA packages fit 3U VPX and SOSA-aligned cards; AES-256 bitstream encryption protects classified configurations.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 10AS048E2F29I2SG — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 10AS048E2F29I2LG | 10AS048E2F29I1HG | 10AS048E2F29E2SG | 10AS048E2F29E2LG | 10AS048E1F29I1HG |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 780-ball FC-FBGA F29 (29x29 mm) | 780-ball FC-FBGA F29 (29x29 mm) - same | 780-ball FC-FBGA F29 (29x29 mm) - same | 780-ball FC-FBGA F29 (29x29 mm) - same | 780-ball FC-FBGA F29 (29x29 mm) - same | 780-ball FC-FBGA F29 (29x29 mm) - same |
| Logic Elements | 480K | 480K | 480K | 480K | 480K | 480K |
| Temperature Grade | Industrial (I2) | Industrial (I2) | Industrial (I1) | Extended (E2) | Extended (E2) | Industrial (I1) |
| Speed Grade | 2 | 2 | 1 | 2 | 2 | 1 |
| Lead-Free / RoHS | Yes (G suffix) | Yes (L suffix - RoHS/lead-free) | Yes (H suffix) | Yes (G suffix) | Yes (L suffix) | Yes (H suffix) |
| Hard Processor System | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Transceiver Rate (max) | 12.5 Gbps | 12.5 Gbps | 12.5 Gbps | 12.5 Gbps | 12.5 Gbps | 12.5 Gbps |
| Approx. Single-Unit Price (USD) | 2,850 | 2,820 | 2,650 | 2,800 | 2,780 | 2,500 |
Principaux différenciateurs
- Industrial-grade ordering code 'I2' (vs commercial 'E2') supports wider deployment (vs 10AS048E2F29E2SG)
- RoHS 'G' ball-finish variant (vs 'L' tray-code variant) preferred for EU shipments (vs 10AS048E2F29I2LG)
- Speed grade 2 (vs speed grade 1) provides higher Fmax for logic and transceivers (vs 10AS048E2F29I1HG)
Notes de conception
The Arria 10 SX requires a strict multi-rail power-up sequence (VCC, VCCP, VCCERAM, VCCPT, then HPS and transceiver rails). Use the Intel Enpirion EM12x0/EM2xx0 PMIC family specifically validated for Altera FPGAs, or implement a discrete sequencer with MOSFET OR-ing and PGOOD chains. Reverse sequencing or simultaneous ramp can permanently damage the device or cause latch-up; per Intel power management user guide, all rails must reach 90% of nominal within 100 ms.
Estimated: at full transceiver utilization (~25 W transceiver) plus logic activity (~15 W) and HPS (~5 W), total power is approximately 45 W. The 780-ball FC-FBGA F29 package has a theta_JA around 14 °C/W with a properly designed heat-spreader; ambient-to-junction rise is therefore ~630 °C, which is impossible. Therefore mandatory thermal management: a copper heat-spreader or conduction-cooled cold plate with thermal interface material rated <0.1 °C·in²/W is required. Refer to Arria 10 thermal management user guide for layout.
Route all decoupling capacitors within 50 mil of their respective supply pins, using 0402 or 0201 ceramic footprints. The 780-ball FC-FBGA F29 requires at least 12 layer PCB stack-up with microvia-on-pad (stacked or staggered) for BGA breakout; trace impedance must be 50 Ω single-ended / 100 Ω differential for transceivers, with continuous reference plane and 4-6 mil clearance to adjacent routes. Refer to Altera/Intel PCB design guidelines for Arria 10 SX for exact stack-up and via pattern.
For 12.5 Gbps transceiver channels, keep AC-coupling capacitors within 200 mil of the device ball, maintain intra-pair skew below 2 ps, and avoid route transitions between layers within the channel. Use HyperLynx or SiSoft QCD for pre-layout channel simulation; integrate IBIS-AMI models for the connected SerDes counterpart. Reference Arria 10 SX transceiver signal integrity guide for de-emphasis and pre-emphasis tap settings.
Do not assume any 10AS048E2F29 suffix variant is a true drop-in replacement without verifying die revision, temperature grade, and speed grade. The 'E2' vs 'I2' suffix changes thermal operating range and may fail in industrial-temperature deployments. Confirm bitstream compatibility with Quartus Prime Programmer before swapping production parts; document the change in a PCN-controlled engineering change order.
Informations de conformité
RoHS compliant per Altera/Intel ordering code 'G' suffix; lead-free ball finish. Halogen-free status not explicitly stated in provided web data and flagged as unknown. AEC-Q100 not applicable - this is a high-end SoC FPGA, not an automotive-grade analog IC.
