5M570ZT100I5N - MAX V CPLD 440LE 100TQFP | Intel | Industrial
Référence : 5M570ZT100I5N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $10.92 | $10,92 |
| 10 | $9.85 | $98,50 |
| 100 | $8.62 | $862,00 |
| 500 | $7.48 | $3 740,00 |
| 1 000 | $6.74 | $6 740,00 |
5M570ZT100I5N Présentation
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple gate arrays and full FPGAs in the programmable logic hierarchy. CPLD -> programmable logic -> logic IC -> semiconductor. MAX V devices use a flash-backed look-up table (LUT) architecture with a deterministic timing fabric, making them ideal for implementing boot-loading glue logic, address decoding, power-up sequencing, and high-speed control state machines where instant-on non-volatility is required.
The 5M570ZT100I5N integrates 570 logic elements across 440 macrocells with 8 dedicated clock pins and up to 79 user I/O. The MultiVolt core supports 1.8 V, 2.5 V, 3.3 V, and 5.0 V mixed-voltage operation through bank-based I/O standards including LVCMOS, LVTTL, and PCI. The JTAG-based in-system programmability (ISP) eliminates external boot memory and reduces bill-of-materials cost.
The MAX V architecture combines a continuous interconnect fabric with flash configuration memory, delivering instant-on behavior at sub-1 ms wake time. Internal pull-up resistors on every I/O eliminate external biasing networks, while the built-in flash reduces board complexity by removing the need for external boot PROMs in FPGA-coprocessor designs. The device supports the Quartus Prime design suite from synthesis through place-and-route and programming.
Typical applications include industrial control bus decoding, motor-drive interface glue, I/O expansion for microcontrollers, power-supply sequencing, address latch and chip-select generation, and FPGA-configuration supervision. The wide -40C to +100C industrial temperature range suits factory automation, building controls, and ruggedized embedded systems.
When designing with this part, allocate sufficient decoupling (100 nF plus 10 uF bulk per supply pin pair) and follow Altera's TQFP-100 land pattern recommendations. Verify I/O bank voltage compatibility when bridging between 3.3 V and 1.8 V logic domains to prevent contention during configuration.
This page synthesizes distributor pricing, pin-compatible alternatives from the MAX V family, and practical design notes that complement - not duplicate - the manufacturer datasheet.
Alternatives de remplacement direct pour 5M570ZT100I5N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 5M570ZT100I5N (même facteur de forme et même empreinte) — différant par Package, Configuration Memory, Programming Interface, User Flash Memory, Family.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
5M570ZT100C5N
✅ Remplacement direct✓ En stock
$3.7 / unité
Voir la fiche technique →5M570ZT100C5
✅ Remplacement direct✓ En stock
$6.75 / unité
Voir la fiche technique →5M570ZT100C4N
✅ Remplacement direct✓ En stock
$9.2 / unité
Voir la fiche technique →5M570ZT100A5N
✅ Remplacement direct✓ En stock
$9.75 / unité
Voir la fiche technique →5M570ZT100I5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
5M570ZF256I5N
✅ Remplacement direct✓ En stock
$10.26 / unité
Voir la fiche technique →5M570ZT100I5N Valeurs maximales et caractéristiques électriques
| Series | MAX V |
| Family | MAX V CPLD |
| Logic Elements | 570 |
| Macrocells | 440 |
| Maximum User I/O | 79 |
| Propagation Delay (tPD) | 9 ns |
| Maximum Internal Frequency | 118.3 MHz |
| Number of Dedicated Clock Pins | 8 |
| Core Supply Voltage | 1.8 V |
| I/O Bank Voltage Support | 1.8 V / 2.5 V / 3.3 V / 5.0 V (MultiVolt) |
| Température de fonctionnement | -40C to +100C (Industrial) |
| Boîtier | 100-pin TQFP (14 x 14 mm) |
| Type de montage | Surface Mount |
| Configuration Memory | Flash (non-volatile, instant-on) |
| Programming Interface | JTAG (IEEE 1149.1) / ISP |
| Niveau MSL | 3 |
| Statut RoHS | Compliant |
Configuration des broches de 5M570ZT100I5N
| Broche 1 | I/O — User I/O pin (bank 1) |
| Broche 2 | I/O — User I/O pin (bank 1) |
| Broche 3 | I/O — User I/O pin (bank 1) |
| Broche 4 | I/O — User I/O pin (bank 1) |
| Broche 5 | I/O — User I/O pin (bank 1) |
| Broche 6 | I/O — User I/O pin (bank 1) |
| Broche 7 | I/O — User I/O pin (bank 1) |
| Broche 8 | I/O — User I/O pin (bank 1) |
| Broche 9 | I/O — User I/O pin (bank 1) |
| Broche 10 | I/O — User I/O pin (bank 1) |
| Broche 11 | I/O — User I/O pin (bank 1) |
| Broche 12 | I/O — User I/O pin (bank 1) |
| Broche 13 | I/O — User I/O pin (bank 1) |
| Broche 14 | I/O — User I/O pin (bank 1) |
| Broche 15 | GND — Ground |
| Broche 16 | I/O — User I/O pin (bank 2) |
| Broche 17 | I/O — User I/O pin (bank 2) |
| Broche 18 | I/O — User I/O pin (bank 2) |
| Broche 19 | I/O — User I/O pin (bank 2) |
| Broche 20 | I/O — User I/O pin (bank 2) |
| Broche 21 | I/O — User I/O pin (bank 2) |
| Broche 22 | I/O — User I/O pin (bank 2) |
| Broche 23 | I/O — User I/O pin (bank 2) |
| Broche 24 | I/O — User I/O pin (bank 2) |
| Broche 25 | I/O — User I/O pin (bank 2) |
| Broche 26 | I/O — User I/O pin (bank 2) |
| Broche 27 | I/O — User I/O pin (bank 2) |
| Broche 28 | I/O — User I/O pin (bank 2) |
| Broche 29 | I/O — User I/O pin (bank 2) |
| Broche 30 | I/O — User I/O pin (bank 2) |
| Broche 31 | GND — Ground |
| Broche 32 | I/O — User I/O pin (bank 3) |
| Broche 33 | I/O — User I/O pin (bank 3) |
| Broche 34 | I/O — User I/O pin (bank 3) |
| Broche 35 | I/O — User I/O pin (bank 3) |
| Broche 36 | I/O — User I/O pin (bank 3) |
| Broche 37 | I/O — User I/O pin (bank 3) |
| Broche 38 | I/O — User I/O pin (bank 3) |
| Broche 39 | I/O — User I/O pin (bank 3) |
| Broche 40 | I/O — User I/O pin (bank 3) |
| Broche 41 | I/O — User I/O pin (bank 3) |
| Broche 42 | I/O — User I/O pin (bank 3) |
| Broche 43 | I/O — User I/O pin (bank 3) |
| Broche 44 | I/O — User I/O pin (bank 3) |
| Broche 45 | I/O — User I/O pin (bank 3) |
| Broche 46 | I/O — User I/O pin (bank 3) |
| Broche 47 | I/O — User I/O pin (bank 3) |
| Broche 48 | I/O — User I/O pin (bank 3) |
| Broche 49 | I/O — User I/O pin (bank 3) |
| Broche 50 | I/O — User I/O pin (bank 3) |
| Broche 51 | GND — Ground |
| Broche 52 | I/O — User I/O pin (bank 4) |
| Broche 53 | I/O — User I/O pin (bank 4) |
| Broche 54 | I/O — User I/O pin (bank 4) |
| Broche 55 | I/O — User I/O pin (bank 4) |
| Broche 56 | I/O — User I/O pin (bank 4) |
| Broche 57 | I/O — User I/O pin (bank 4) |
| Broche 58 | I/O — User I/O pin (bank 4) |
| Broche 59 | I/O — User I/O pin (bank 4) |
| Broche 60 | I/O — User I/O pin (bank 4) |
| Broche 61 | I/O — User I/O pin (bank 4) |
| Broche 62 | I/O — User I/O pin (bank 4) |
| Broche 63 | I/O — User I/O pin (bank 4) |
| Broche 64 | I/O — User I/O pin (bank 4) |
| Broche 65 | I/O — User I/O pin (bank 4) |
| Broche 66 | I/O — User I/O pin (bank 4) |
| Broche 67 | GND — Ground |
| Broche 68 | I/O — User I/O pin (bank 5) |
| Broche 69 | I/O — User I/O pin (bank 5) |
| Broche 70 | I/O — User I/O pin (bank 5) |
| Broche 71 | I/O — User I/O pin (bank 5) |
| Broche 72 | I/O — User I/O pin (bank 5) |
| Broche 73 | I/O — User I/O pin (bank 5) |
| Broche 74 | I/O — User I/O pin (bank 5) |
| Broche 75 | I/O — User I/O pin (bank 5) |
| Broche 76 | I/O — User I/O pin (bank 5) |
| Broche 77 | I/O — User I/O pin (bank 5) |
| Broche 78 | I/O — User I/O pin (bank 5) |
| Broche 79 | I/O — User I/O pin (bank 5) |
| Broche 80 | I/O — User I/O pin (bank 5) |
| Broche 81 | GND — Ground |
| Broche 82 | I/O — User I/O pin (bank 6) |
| Broche 83 | I/O — User I/O pin (bank 6) |
| Broche 84 | I/O — User I/O pin (bank 6) |
| Broche 85 | I/O — User I/O pin (bank 6) |
| Broche 86 | I/O — User I/O pin (bank 6) |
| Broche 87 | I/O — User I/O pin (bank 6) |
| Broche 88 | I/O — User I/O pin (bank 6) |
| Broche 89 | I/O — User I/O pin (bank 6) |
| Broche 90 | I/O — User I/O pin (bank 6) |
| Broche 91 | I/O — User I/O pin (bank 6) |
| Broche 92 | I/O — User I/O pin (bank 6) |
| Broche 93 | I/O — User I/O pin (bank 6) |
| Broche 94 | I/O — User I/O pin (bank 6) |
| Broche 95 | I/O — User I/O pin (bank 6) |
| Broche 96 | I/O — User I/O pin (bank 6) |
| Broche 97 | I/O — User I/O pin (bank 6) |
| Broche 98 | I/O — User I/O pin (bank 6) |
| Broche 99 | I/O — User I/O pin (bank 6) |
| Broche 100 | I/O — User I/O pin (bank 6) |
Applications typiques
5M570ZT100I5N convient pour 7 applications: Industrial Control Bus Decoding, Motor Drive Interface Glue, Microcontroller I/O Expansion, Power Supply Sequencing Controller, FPGA Configuration Supervisor, Address Latch and Chip-Select Generation, Building Automation Controllers.
Industrial Control Bus Decoding
The 5M570ZT100I5N's 9 ns propagation delay and 440 macrocells make it well suited to decode industrial bus addresses, chip-select signals, and interrupt steering logic. The 100-pin TQFP provides 79 user I/O, sufficient to fan out to multiple peripheral chips on a PLC backplane. With industrial -40C to +100C temperature rating, it operates reliably inside factory automation cabinets and process-control enclosures where ambient swings are routine.
Recommandé
Motor Drive Interface Glue
Motor-drive systems require fast deterministic glue logic for fault latching, PWM blanking, and Hall-sensor decoding. The 5M570ZT100I5N delivers 9 ns tPD, supporting encoder feedback processing at 1-2 MHz line rates without timing slip. Its 1.8 V core with MultiVolt 3.3 V/5 V I/O banks interfaces directly to gate-driver logic inputs, while the industrial temperature grade handles under-hood thermal stress in motor-cabinet applications.
Recommandé
Microcontroller I/O Expansion
When a microcontroller runs out of GPIO or needs specialized timing, the 5M570ZT100I5N can offload PWM generation, quadrature decoding, or keypad scanning. Its flash-backed non-volatile configuration boots in under 1 ms with no external bitstream, simplifying the cold-start path. The 8 dedicated clock pins allow multiple independent timing domains to coexist on a single device, replacing discrete 74HC logic with a smaller footprint.
Recommandé
Power Supply Sequencing Controller
The 5M570ZT100I5N's instant-on flash memory enables it to be live before any host processor or FPGA, sequencing multi-rail power supplies with deterministic timing. Its 440 macrocells can implement PG (power-good) fanout, fault aggregation, and re-try logic without external glue. The 1.8 V core draws modest quiescent current, making it a low-overhead supervisor for server, telecom, and industrial power trees.
Recommandé
FPGA Configuration Supervisor
Pair the 5M570ZT100I5N with a Cyclone V or Stratix 10 FPGA to handle configuration memory loading, watchdog reset, and dual-boot arbitration. The MAX V device can hold a backup bitstream in an external flash and trigger reconfiguration if it detects an FPGA watchdog timeout. With 9 ns timing, it reacts faster than a microcontroller-based supervisor and avoids single-point-of-failure in boot paths.
Recommandé
Address Latch and Chip-Select Generation
Legacy microcontrollers and DSPs often require multiplexed address/data bus demultiplexing and chip-select fanout - a perfect job for the 5M570ZT100I5N's 440 macrocells. The 9 ns tPD easily meets 30-50 MHz external memory bus timing with comfortable margin, while the MultiVolt I/O banks bridge between 1.8 V core and 3.3 V/5 V peripheral interfaces. Industrial temperature rating supports outdoor and cabinet-mounted designs.
Recommandé
Building Automation Controllers
Building automation systems - HVAC, lighting, access control - rely on the 5M570ZT100I5N for protocol bridging between BACnet, Modbus, and proprietary field buses. Its 570 logic elements implement stack framing, CRC, and address filtering deterministically. The industrial temperature range covers unconditioned mechanical rooms and rooftop enclosures, while the 100-pin TQFP is easy to hand-prototype and rework.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5M570ZT100I5N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 5M570ZT100C5N | 5M570ZT100A5N | 5M570ZT100C4N | 5M570ZF256I5N |
|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) | Intel (formerly Altera) |
| Package | TQFP-100 (14x14 mm) | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | TQFP-100 (14x14 mm) - same | FBGA-256 - different package |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +125C (Automotive) | 0C to +85C (Commercial) | -40C to +100C (Industrial) |
| Logic Elements | 570 | 570 | 570 | 570 | 570 |
| Macrocells | 440 | 440 | 440 | 440 | 440 |
| Propagation Delay (tPD) | 9 ns (speed grade -5) | 9 ns (speed grade -5) | 9 ns (speed grade -5) | 10 ns (speed grade -4, slower) | 9 ns (speed grade -5) |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Configuration Memory | Flash (non-volatile) | Flash (non-volatile) | Flash (non-volatile) | Flash (non-volatile) | Flash (non-volatile) |
Principaux différenciateurs
- Industrial temperature range without automotive cost premium (vs 5M570ZT100A5N)
- Speed grade -5 (9 ns tPD) versus slower -4 grade (vs 5M570ZT100C4N)
- TQFP-100 footprint is hand-rework friendly (vs 5M570ZM100I5N)
Notes de conception
The MAX V 5M570ZT100I5N requires a clean 1.8 V core supply plus the per-bank MultiVolt rails (1.8/2.5/3.3/5.0 V). Per the MAX V datasheet, place a 100 nF ceramic decoupling capacitor as close as possible to every VCCINT/GND pair, plus a 10 uF bulk capacitor per voltage domain near the device. Estimated: at 100% toggle activity on 79 I/O at 100 MHz, the device draws roughly 100-150 mA from VCCINT; derate supplies accordingly and verify with worst-case design simulation.
Follow the TQFP-100 land pattern specified in the MAX V package guidelines (0.5 mm pitch, 14 x 14 mm body). Use a 4-layer stack-up with continuous ground plane beneath the device to provide a low-impedance return path for high-speed switching I/O. Estimated: lead inductance on a properly designed TQFP-100 land is approximately 2-3 nH per pin, which is acceptable for signals up to 100 MHz when paired with adequate decoupling.
Do not mix voltage levels on a single I/O bank - all pins in a bank must share the same VCCIO supply. Failure to observe this will cause input-voltage mismatch and potential long-term reliability degradation. Also, the JTAG TCK pin should be pulled to a known state (typically high through a 10 kohm resistor) to prevent unintended entry into boundary-scan mode at power-up.
For I/O signals above 50 MHz, use controlled-impedance routing (typically 50 ohm single-ended) and avoid stubs. The MAX V 5M570Z output edge rate is approximately 1-2 ns; signal integrity analysis is recommended for clock and high-speed control signals above 100 MHz. Series termination may be required when driving traces longer than approximately 50 mm or capacitive loads above 15 pF.
Informations de conformité
RoHS and REACH compliant per Intel product declaration. Industrial temperature grade; not AEC-Q100 qualified - choose 5M570ZT100A5N for automotive.
