5M80ZE64I5N - MAX V CPLD, 64 LE, EQFP-64 | Intel / Altera
Référence : 5M80ZE64I5N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.45 | $6,45 |
| 10 | $5.81 | $58,10 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2 325,00 |
| 1 000 | $4.1 | $4 100,00 |
5M80ZE64I5N Présentation
What is a CPLD? A Complex Programmable Logic Device is a non-volatile, flash- or EEPROM-backed programmable logic IC that sits between simple PLDs (PAL/GAL) and FPGAs in the programmable logic hierarchy. CPLDs use a classic AND-OR PLA macrocell fabric with predictable, deterministic timing (no routing variability), making them ideal for glue logic, bus bridging, power-up control sequencing, and address decoding. They retain their configuration through power cycles without an external boot PROM, distinguishing them from SRAM-based FPGAs that require a configuration flash.
Key features include 64 macro cells, 30 user I/Os, an 118.3 MHz internal operating frequency, 1.8 V core voltage, in-system programmability via JTAG, and an exposed-pad EQFP-64 package for improved thermal dissipation. The MAX V architecture integrates a precision internal oscillator, user flash memory, and supports hot-socketing with 5 V tolerant I/O on most pins, enabling mixed-voltage interfacing to legacy 3.3 V and 5 V logic without external level shifters. The device is rated for the industrial temperature range (-40C to +100C for the I5N speed grade).
Typical applications include bus interface bridging, address decoding and glue logic, power-up/power-down sequencing, LED and LCD driving control, I/O expansion for microcontrollers, configuration loading for companion FPGAs, and legacy logic consolidation. Engineers use the 5M80ZE64I5N when deterministic timing, instant-on non-volatile configuration, and low unit cost matter more than the gate density of an FPGA.
When designing with this part, plan JTAG chain sharing with other Altera devices, observe the exposed-pad PCB layout for thermal relief, and verify signal-integrity margins against the 7.9 ns propagation delay budget. Quartus II Web Edition is the free toolchain that supports this part, with device support packages still downloadable from Intel's legacy MAX V support page.
This page synthesizes real-time distributor pricing, drop-in MAX V alternatives from Altera/Intel, and practical design notes that augment the manufacturer datasheet with information engineers need for sourcing decisions.
Alternatives de remplacement direct pour 5M80ZE64I5N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 5M80ZE64I5N (même facteur de forme et même empreinte) — différant par Package, Configuration Memory, Operating Temperature, Propagation Delay (tPD), Programming Interface.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
5M80ZE64C5N
✅ Remplacement direct✓ En stock
$4.38 / unité
Voir la fiche technique →5M80ZE64A5N
✅ Remplacement direct✓ En stock
$3.05 / unité
Voir la fiche technique →5M40ZE64I5N
✅ Remplacement direct✓ En stock
$2.74 / unité
Voir la fiche technique →5M80ZE64C4N
✅ Remplacement direct✓ En stock
$2.1 / unité
Voir la fiche technique →5M160ZE64I5N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.13 / unité
Voir la fiche technique →5M570ZE64I5N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$7.2 / unité
Voir la fiche technique →5M80ZE64I5N Valeurs maximales et caractéristiques électriques
| Family | MAX V |
| Device Type | CPLD - Complex Programmable Logic Device |
| Macro Cells (Logic Elements) | 64 |
| User I/Os | 30 |
| Internal Frequency (fMAX) | 118.3 MHz |
| Propagation Delay (tPD) | 7.9 ns |
| Core Supply Voltage (VCCINT) | 1.8 V |
| I/O Supply Voltage (VCCIO) | 1.2 V to 3.3 V |
| Logic Block Number | 4 |
| Boîtier | EQFP-64 (HTFQFP-64, 9x9 mm, 0.4 mm pitch) |
| Type de montage | Surface Mount |
| Température de fonctionnement | -40C to +100C (Industrial) |
| Programming Interface | JTAG (IEEE 1149.1) / ISP via Quartus II |
| Non-volatile Configuration | Yes (Flash-based) |
| Statut RoHS | Compliant |
Configuration des broches de 5M80ZE64I5N
| Broche 1 | I/O — General purpose user I/O bank 1 |
| Broche 2 | I/O — General purpose user I/O bank 1 |
| Broche 3 | I/O — General purpose user I/O bank 1 |
| Broche 4 | I/O — General purpose user I/O bank 1 |
| Broche 5 | I/O — General purpose user I/O bank 1 |
| Broche 6 | I/O — General purpose user I/O bank 1 |
| Broche 7 | I/O — General purpose user I/O bank 1 |
| Broche 8 | I/O — General purpose user I/O bank 1 |
| Broche 9 | GND — Ground reference |
| Broche 10 | I/O — General purpose user I/O bank 2 |
| Broche 11 | I/O — General purpose user I/O bank 2 |
| Broche 12 | I/O — General purpose user I/O bank 2 |
| Broche 13 | I/O — General purpose user I/O bank 2 |
| Broche 14 | I/O — General purpose user I/O bank 2 |
| Broche 15 | I/O — General purpose user I/O bank 2 |
| Broche 16 | VCCIO1 — I/O bank 1 supply voltage (1.2 V to 3.3 V) |
| Broche 17 | I/O — General purpose user I/O bank 1 |
| Broche 18 | I/O — General purpose user I/O bank 1 |
| Broche 19 | I/O — General purpose user I/O bank 1 |
| Broche 20 | I/O — General purpose user I/O bank 1 |
| Broche 21 | I/O — General purpose user I/O bank 1 |
| Broche 22 | I/O — General purpose user I/O bank 1 |
| Broche 23 | I/O — General purpose user I/O bank 1 |
| Broche 24 | I/O — General purpose user I/O bank 1 |
| Broche 25 | TDI — JTAG Test Data In |
| Broche 26 | TMS — JTAG Test Mode Select |
| Broche 27 | TCK — JTAG Test Clock |
| Broche 28 | TDO — JTAG Test Data Out |
| Broche 29 | I/O — General purpose user I/O bank 2 |
| Broche 30 | I/O — General purpose user I/O bank 2 |
| Broche 31 | I/O — General purpose user I/O bank 2 |
| Broche 32 | GND — Ground reference |
| Broche 33 | VCCINT — Core supply voltage (1.8 V, internal regulator) |
| Broche 34 | I/O — General purpose user I/O bank 2 |
| Broche 35 | I/O — General purpose user I/O bank 2 |
| Broche 36 | I/O — General purpose user I/O bank 2 |
| Broche 37 | I/O — General purpose user I/O bank 2 |
| Broche 38 | I/O — General purpose user I/O bank 2 |
| Broche 39 | VCCIO2 — I/O bank 2 supply voltage (1.2 V to 3.3 V) |
| Broche 40 | I/O — General purpose user I/O bank 2 |
| Broche 41 | I/O — General purpose user I/O bank 2 |
| Broche 42 | I/O — General purpose user I/O bank 2 |
| Broche 43 | I/O — General purpose user I/O bank 2 |
| Broche 44 | I/O — General purpose user I/O bank 2 |
| Broche 45 | I/O — General purpose user I/O bank 2 |
| Broche 46 | I/O — General purpose user I/O bank 2 |
| Broche 47 | I/O — General purpose user I/O bank 2 |
| Broche 48 | I/O — General purpose user I/O bank 2 |
| Broche 49 | I/O — General purpose user I/O bank 3 |
| Broche 50 | I/O — General purpose user I/O bank 3 |
| Broche 51 | I/O — General purpose user I/O bank 3 |
| Broche 52 | I/O — General purpose user I/O bank 3 |
| Broche 53 | I/O — General purpose user I/O bank 3 |
| Broche 54 | I/O — General purpose user I/O bank 3 |
| Broche 55 | GND — Ground reference |
| Broche 56 | I/O — General purpose user I/O bank 3 |
| Broche 57 | I/O — General purpose user I/O bank 3 |
| Broche 58 | I/O — General purpose user I/O bank 3 |
| Broche 59 | I/O — General purpose user I/O bank 3 |
| Broche 60 | I/O — General purpose user I/O bank 3 |
| Broche 61 | VCCIO3 — I/O bank 3 supply voltage (1.2 V to 3.3 V) |
| Broche 62 | I/O — General purpose user I/O bank 3 |
| Broche 63 | I/O — General purpose user I/O bank 3 |
| Broche 64 | I/O — General purpose user I/O bank 3 |
| Broche EP | GND (Exposed Pad) — Thermal pad, must be soldered to ground copper pour |
Applications typiques
5M80ZE64I5N convient pour 6 applications: Bus Interface Bridging, Address Decoding and Glue Logic, Power-Up and Power-Down Sequencing, LED and Display Control Driving, I/O Expansion for Microcontrollers, Legacy Logic Consolidation.
Bus Interface Bridging
The 5M80ZE64I5N is well suited to bridge between asynchronous buses such as 8-bit parallel microcontrollers to 16/32-bit peripheral buses, where its 64 macro cells provide enough logic for protocol conversion and 30 user I/Os cover typical 8 to 16-bit data plus control signals. Its 7.9 ns propagation delay and 118.3 MHz fMAX easily support 50 MHz bus speeds with comfortable timing margin. The non-volatile flash-based configuration means the bridge comes up instantly at power-on without waiting for FPGA configuration, critical for systems where the host CPU expects the bus to be ready immediately after reset. Verified drop-in compatibility with the same MAX V family means existing Altera reference designs can be reused.
Recommandé
Address Decoding and Glue Logic
The 5M80ZE64I5N consolidates discrete 74-series TTL glue logic - address latches, chip-select decoders, and interrupt arbiters - into a single non-volatile device. With 64 macro cells it can decode up to 26 address lines plus several control signals; the 30 user I/Os handle typical chip-select fan-out for memory banks and peripherals. The deterministic timing of CPLD macro cells (no FPGA routing variability) makes it ideal for chip-select generation where setup/hold margins must be calculated precisely. Instant-on flash configuration eliminates the FPGA boot delay that would otherwise stall CPU memory cycles at reset.
Recommandé
Power-Up and Power-Down Sequencing
The 5M80ZE64I5N generates precise rail-sequencing signals for multi-rail systems where power must be applied in a specific order to prevent latch-up or in-rush damage. Its 64 macro cells can implement state machines with multiple timer branches; the 30 user I/Os drive enable pins of multiple LDOs and DC-DC converters. Because the CPLD is non-volatile, sequencing begins at t=0 of power-on without configuration delay, ensuring deterministic start-up behavior. Industrial temperature rating enables deployment in factory automation, base-station, and outdoor telecom equipment where sequencing logic must operate reliably across -40C to +100C.
Recommandé
LED and Display Control Driving
The 5M80ZE64I5N drives multiplexed LED matrices, character LCDs, and seven-segment displays using Charlieplexing or direct multiplexing. With 30 user I/Os it can scan up to a 5x7 LED matrix plus segment drivers; the 118.3 MHz fMAX supports high refresh rates above 1 kHz with no perceptible flicker. The non-volatile configuration stores custom display patterns and brightness curves without external EEPROM. Industrial-grade operation permits use in automotive dashboards, industrial HMIs, and outdoor signage where commercial-grade CPLDs would fail temperature margins.
Recommandé
I/O Expansion for Microcontrollers
The 5M80ZE64I5N expands the limited GPIO count of low-pin-count microcontrollers by adding 30 user I/Os accessible via SPI or I2C through a serial-to-parallel interface. With 64 macro cells the CPLD can implement shift-register chains, PWM generators, and quadrature decoders entirely in deterministic logic. Its 7.9 ns propagation delay supports fast SPI clock rates above 50 MHz, enabling sub-microsecond I/O updates. The 1.2 V to 3.3 V VCCIO range allows direct connection to 1.8 V, 2.5 V, and 3.3 V MCUs without level shifters, simplifying PCB layout.
Recommandé
Legacy Logic Consolidation
The 5M80ZE64I5N replaces aging PAL, GAL, and 74-series TTL chips on legacy boards, reducing component count, PCB area, and power consumption. With 64 macro cells it can absorb the equivalent of 5 to 10 standard TTL packages while providing easier in-field updates via JTAG. The instant-on flash configuration matches the power-on behavior of legacy TTL exactly, so existing system firmware does not need modification. Industrial temperature rating is critical for factory-floor and outdoor systems where the legacy TTL it replaces has begun to fail.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5M80ZE64I5N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 5M80ZE64C5N | 5M80ZE64A5N | 5M40ZE64I5N | 5M80ZE64C4N | 5M160ZE64I5N | 5M570ZE64I5N |
|---|---|---|---|---|---|---|---|
| Package | EQFP-64 (9x9 mm) | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same | EQFP-64 - same |
| Brand | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) | Altera (Intel) |
| Macro Cells | 64 | 64 | 64 | 32 | 64 | 128 | 570 |
| User I/Os | 30 | 30 | 30 | 30 | 30 | 34 | 34 |
| fMAX (Internal) | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz | Lower (C4 grade) | 118.3 MHz | 152 MHz |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +125C (Automotive) | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) |
| AEC-Q100 Automotive | No | No | Yes | No | No | No | No |
| Unit Price (qty 100, USD) | 5.20 | 4.85 | 8.40 | 4.30 | 4.95 | 7.50 | 18.20 |
Principaux différenciateurs
- Lowest cost industrial-grade MAX V variant at 64 macro cells (vs 5M160ZE64I5N)
- Industrial temperature rating with full -40C to +100C operating range (vs 5M80ZE64C5N)
- Non-volatile flash configuration enables instant-on at power-up (vs Lattice ispMACH 4000V)
Notes de conception
The EQFP-64 package includes an exposed thermal pad (pin EP) on the underside that MUST be soldered to a copper pour on the PCB for proper thermal dissipation. For a typical MAX V design with all 30 I/Os toggling at 50 MHz, the device dissipates approximately 200 mW. With the exposed pad properly soldered to at least 1 square inch of 2-layer copper, junction temperature rise is under 15C above ambient. Omitting the thermal pad connection can cause thermal runaway and reliability failures above 70C ambient.
Decouple all VCCINT and VCCIO pins with 100 nF ceramic capacitors placed within 3 mm of each supply pin. Use one bulk 10 uF tantalum or ceramic capacitor per supply rail. The exposed pad (EP) requires an array of thermal vias (typically 0.3 mm diameter, 1 mm pitch) connecting the top copper pour to internal ground planes. Avoid routing signal traces under the exposed pad to prevent solder joint defects.
Do not confuse the legacy Altera MAX V datasheet (with Altera letterhead) with current Intel FPGA documentation - they cover the same silicon. When designing for hot-socketing or 5 V tolerance, verify the specific I/O bank's VCCIO voltage because each I/O bank tolerates only up to VCCIO + 0.7 V or 4.0 V maximum, whichever is lower. Exceeding this rating damages the I/O cells permanently. Also verify JTAG chain sharing with other Altera devices to avoid contention on TDO.
For high-speed outputs (>50 MHz), add 22 ohm to 33 ohm series damping resistors close to the CPLD output to reduce transmission-line ringing. For long PCB traces (>5 cm), use controlled-impedance routing with matched trace impedance of 50 ohm to 60 ohm. Avoid splitting VCCIO planes across multiple I/O banks with different voltages; keep each bank on a contiguous plane to maintain signal integrity.
Informations de conformité
RoHS and REACH compliant per Intel / Altera product declaration. Not AEC-Q100 qualified - choose 5M80ZE64A5N for automotive. Lead-free Pb-free matte-tin finish.
