ADS8471IBRGZR - 16-Bit 1MSPS SAR ADC w/ Internal Ref | TI
Référence : ADS8471IBRGZR ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.9 | $4 450,00 |
| 1 000 | $7.95 | $7 950,00 |
| 3 000 | $6.8 | $20 400,00 |
ADS8471IBRGZR Présentation
A SAR ADC is a successive-approximation-register analog-to-digital converter - a precision data-converter topology that uses a binary-search algorithm against an internal DAC to resolve each conversion in N clock cycles for N bits of resolution. SAR ADCs offer deterministic latency, low power, and excellent DC accuracy with no pipeline delay, which is why the SAR topology dominates in industrial process control, precision instrumentation, and battery-powered data-acquisition applications.
Key features include 1 MSPS throughput, 16-bit no-missing-codes resolution, an internal low-drift 4.096-V reference, pseudo-bipolar inputs up to +/-4.096 V or 0 to 4.096 V unipolar operation, parallel 16-bit or byte-wide 8-bit interface, and industrial -40C to +85C operating range. The integrated reference eliminates an external component, simplifies BOM, and improves temperature stability.
The SAR core uses a charge-redistribution DAC architecture with internal calibration, achieving excellent linearity and low THD. The internal 4.096-V reference is low-drift and provides a ratiometric reference for the input signal chain.
Typical applications include industrial process control PLC analog input modules, multichannel data-acquisition systems, precision instrumentation and test equipment, optical encoder feedback loops, and medical imaging front-ends. The wide analog input range accommodates 5-V or +/-5-V industrial transducer signals directly.
When designing with this device, place the decoupling capacitors as close to the AVDD and DVDD pins as possible and follow the datasheet reference-driver layout to avoid reference noise coupling into the conversion result. Use the BYTE mode pin to simplify connection to 8-bit microcontrollers and ensure the BUSY/INT signal is monitored to avoid read contention.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone TI datasheet document.
Alternatives de remplacement direct pour ADS8471IBRGZR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ADS8471IBRGZR (même facteur de forme et même empreinte) — différant par Package, Input Type, Resolution, Sample Rate, Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
ADS8481IRGZR
✅ Remplacement direct✓ En stock
$8.1 / unité
Voir la fiche technique →ADS8482IBRGZR
✅ Remplacement direct✓ En stock
$14.45 / unité
Voir la fiche technique →ADS8406IPFBRG4
✅ Remplacement direct✓ En stock
$11.92 / unité
Voir la fiche technique →ADS8401IBPFBR
✅ Remplacement direct✓ En stock
$11.75 / unité
Voir la fiche technique →ADS8383IPFBRG4
✅ Remplacement direct✓ En stock
$11.95 / unité
Voir la fiche technique →ADS5546IRGZRG4
✅ Remplacement direct✓ En stock
$21.55 / unité
Voir la fiche technique →ADS8471IBRGZR Valeurs maximales et caractéristiques électriques
| Résolution | 16 bit |
| Sample Rate | 1 MSPS |
| Architecture | SAR (Successive Approximation Register) |
| Number of Inputs | 1 |
| Input Type | Pseudo-Bipolar, Unipolar Single-Ended |
| Internal Reference | 4.096 V |
| Plage de tension d'entrée | 0 V to 4.096 V (unipolar) / +/-4.096 V (pseudo-bipolar) |
| Output Interface | Parallel 16-bit or 8-bit byte-wide (2 read cycles) |
| Plage de température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | 48-VQFN (RGZ) 7x7 mm |
| Nombre de broches | 48 |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de ADS8471IBRGZR
| Broche 1 | AVDD — Analog supply voltage |
| Broche 2 | AGND — Analog ground |
| Broche 3 | REF — Internal 4.096 V reference output / bypass |
| Broche 4 | IN+ — Positive analog input |
| Broche 5 | IN- — Negative analog input (pseudo-bipolar) |
| Broche 6 | AGND — Analog ground |
| Broche 7 | AVDD — Analog supply voltage |
| Broche 8 | CS — Chip select (active low) |
| Broche 9 | RD — Read strobe (active low) |
| Broche 10 | BUSY/INT — Conversion busy / interrupt output |
| Broche 11 | BYTE — Bus mode select (16-bit or 8-bit) |
| Broche 12 | DVDD — Digital supply voltage |
| Broche 13 | DGND — Digital ground |
| Broche 14 | DB0 — Data bit 0 (LSB) |
| Broche 15 | DB1 — Data bit 1 |
| Broche 16 | DB2 — Data bit 2 |
| Broche 17 | DB3 — Data bit 3 |
| Broche 18 | DB4 — Data bit 4 |
| Broche 19 | DB5 — Data bit 5 |
| Broche 20 | DB6 — Data bit 6 |
| Broche 21 | DB7 — Data bit 7 |
| Broche 22 | DB8 — Data bit 8 |
| Broche 23 | DB9 — Data bit 9 |
| Broche 24 | DB10 — Data bit 10 |
| Broche 25 | DB11 — Data bit 11 |
| Broche 26 | DB12 — Data bit 12 |
| Broche 27 | DB13 — Data bit 13 |
| Broche 28 | DB14 — Data bit 14 |
| Broche 29 | DB15 — Data bit 15 (MSB) |
| Broche 30 | DGND — Digital ground |
| Broche 31 | DVDD — Digital supply voltage |
| Broche 32 | NC — Not connected (per datasheet) |
| Broche 33 | NC — Not connected (per datasheet) |
| Broche 34 | NC — Not connected (per datasheet) |
| Broche 35 | NC — Not connected (per datasheet) |
| Broche 36 | NC — Not connected (per datasheet) |
| Broche 37 | NC — Not connected (per datasheet) |
| Broche 38 | AGND — Analog ground |
| Broche 39 | REFGND — Reference ground |
| Broche 40 | AGND — Analog ground |
| Broche 41 | AGND — Analog ground |
| Broche 42 | AGND — Analog ground |
| Broche 43 | AGND — Analog ground |
| Broche 44 | AGND — Analog ground |
| Broche 45 | NC — Not connected (per datasheet) |
| Broche 46 | NC — Not connected (per datasheet) |
| Broche 47 | NC — Not connected (per datasheet) |
| Broche 48 | EP — Exposed thermal pad (connect to AGND) |
Applications typiques
ADS8471IBRGZR convient pour 7 applications: Industrial Process Control PLC, Multichannel Data Acquisition Systems, Precision Test and Measurement, Medical Imaging Front-End, Optical Encoder and Resolver Feedback, Power Quality and Energy Metering, Vibration and Acoustic Analysis.
Industrial Process Control PLC
The ADS8471IBRGZR fits industrial PLC analog input modules thanks to its 16-bit resolution and 1 MSPS throughput for high-speed closed-loop control. The pseudo-bipolar +/-4.096 V input range accepts +/-5 V industrial transducer signals directly without external signal conditioning, and the internal 4.096 V reference eliminates an external reference IC. Placed on each analog input channel with proper RFI filtering, the SAR topology provides deterministic conversion latency critical for synchronized control loops. The 48-VQFN footprint supports compact PLC module designs.
Recommandé
Multichannel Data Acquisition Systems
The ADS8471IBRGZR is ideal for multichannel data-acquisition (DAQ) systems where 16-bit accuracy and 1 MSPS sampling per channel are required. The parallel 16-bit interface enables direct connection to FPGAs or microcontrollers without glue logic, and the BYTE mode pin allows 8-bit bus multiplexing for cost-sensitive designs. Used with an external analog multiplexer, one ADS8471 can sequentially digitize many channels; SAR architecture's zero pipeline delay simplifies triggering. The integrated 4.096 V reference reduces per-channel BOM cost across the DAQ system.
Recommandé
Precision Test and Measurement
The ADS8471IBRGZR suits bench-top and rack-mount test instrumentation where 16-bit resolution at 1 MSPS is needed for waveform capture or signal analysis. The internal low-drift 4.096 V reference provides calibration stability across temperature, and the SAR architecture delivers excellent linearity for THD measurements. Mounted in a digitizer front-end, the device pairs naturally with a precision op-amp input driver and a low-jitter clock source. The 48-VQFN package with exposed thermal pad supports high-density instrumentation layouts.
Recommandé
Medical Imaging Front-End
The ADS8471IBRGZR works well in medical imaging front-ends such as ultrasound beam-formers and optical coherence tomography where 16-bit dynamic range at 1 MSPS is required per channel. The SAR architecture's deterministic latency simplifies beam-forming timing calculations, and the internal reference reduces noise coupling in sensitive analog signal paths. Placed after the LNA and time-gain compensation (TGC) stages, the ADC delivers the dynamic range needed for diagnostic imaging. Industrial temperature grade and small QFN package suit portable imaging carts.
Recommandé
Optical Encoder and Resolver Feedback
The ADS8471IBRGZR is suitable for optical encoder and resolver position-feedback loops where 16-bit absolute position resolution must be acquired at high update rates. Used to digitize sine/cosine resolver signals through an op-amp front-end, the 1 MSPS throughput supports >50 kHz update rates per axis. The pseudo-bipolar input accepts bipolar resolver outputs directly, and the parallel interface connects to FPGA or DSP position-tracking logic. The compact 48-VQFN footprint enables multi-axis servo designs.
Recommandé
Power Quality and Energy Metering
The ADS8471IBRGZR fits three-phase power-quality analyzers and revenue-grade energy meters where 16-bit dynamic range is needed to capture harmonics and transients on current/voltage channels. The SAR topology samples at a precise instant per cycle, enabling accurate RMS and harmonic computations. The pseudo-bipolar input accommodates current-transformer and voltage-divider outputs directly, and the internal reference simplifies per-channel analog signal chain. Placed alongside shunt or CT conditioning, the ADC supports IEC 62053-22 class 0.2S metering accuracy.
Recommandé
Vibration and Acoustic Analysis
The ADS8471IBRGZR suits vibration and acoustic data-acquisition modules where 16-bit resolution at 1 MSPS per channel captures broadband machinery-condition signals. Used with piezoelectric (IEPE) sensor conditioning or MEMS microphone front-ends, the SAR ADC delivers the dynamic range for FFT-based condition monitoring. The parallel interface enables DMA-style transfers into FPGAs for real-time spectral processing, and the integrated 4.096 V reference reduces BOM cost across multiple channels in a vibration DAQ chassis.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ADS8471IBRGZR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ADS8481IRGZR | ADS8482IBRGZR | ADS8406IPFBRG4 | ADS8401IBPFBR | ADS5546IRGZRG4 |
|---|---|---|---|---|---|---|
| Package | 48-VQFN (RGZ) 7x7 mm | 48-VQFN (RGZ) - same | 48-VQFN (RGZ) - same | 48-TQFP (PFB) - different footprint | 48-TQFP (PFB) - different footprint | 48-VQFN (RGZ) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit | 14 bit |
| Architecture | SAR | SAR | SAR | SAR | SAR | Pipeline |
| Internal Reference | 4.096 V | Internal | Internal | External (per family) | External (per family) | External |
| Input Channels | 1 | 1 | 1 | 1 (per family) | 1 | 1 |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Principaux différenciateurs
- Integrated precision 4.096 V reference (vs ADS8406IPFBRG4)
- Drop-in-compatible same-family upgrade path (vs ADS8481IRGZR)
- SAR architecture - zero pipeline delay (vs ADS5546IRGZRG4)
Notes de conception
Place a 10 uF tantalum and 0.1 uF ceramic decoupling capacitor pair as close as possible to each AVDD pin and a separate pair on each DVDD pin. Keep analog and digital ground planes connected only at a single point under the exposed thermal pad (EP), which must be soldered to the AGND plane for both electrical ground and thermal dissipation. Estimated: with 5 V AVDD and 3.3 V DVDD and 1 MSPS operation, total supply current is dominated by analog current per the datasheet electrical characteristics table; verify exact mA in the datasheet before budgeting the LDO.
Route analog input traces (IN+, IN-) as a differential pair with matched impedance and keep them away from digital output traces (DB15-DB0) and digital supply lines. The internal 4.096 V reference pin (REF) must be bypassed with a 10 uF tantalum and 0.1 uF ceramic capacitor in parallel; place the reference capacitor within 5 mm of the REF pin to avoid reference-induced conversion errors. Avoid routing digital switching signals directly over the analog input region to prevent coupling noise into the conversion result.
Do not leave the exposed thermal pad (EP) unsoldered - the EP must be soldered to a sufficient copper pad to meet the thermal resistance specifications in the datasheet and to provide the analog ground return path. Verify the BYTE pin logic level matches the host microcontroller's bus mode before initiating reads; mismatched bus modes cause shifted data bits. The BUSY/INT signal must be monitored and the read strobe (RD) gated appropriately to avoid reading stale conversion data. Estimated: at full 1 MSPS throughput with 5 V supplies, junction temperature rise should remain below 20 C with a 1 square inch copper pour; verify in the datasheet thermal table for production design.
Drive the analog inputs through a low-noise op-amp buffer (such as OPA1612) with sufficient bandwidth (>= 10x the maximum input frequency) to avoid ADC aperture-induced errors. Add an RC anti-aliasing filter at the ADC input with the cutoff just above the maximum signal frequency of interest; for 1 MSPS Nyquist, place the filter pole well below 500 kHz. Decouple the input op-amp supply separately from the ADC supply to prevent digital switching noise from coupling through the analog rail.
Informations de conformité
RoHS compliant per TI product page; industrial -40C to +85C temperature grade (not AEC-Q100 automotive). Halogen-free status not explicitly stated in provided data - flagged as 'unknown'.
