ATSAML11E15A-MF - 32MHz Secure Arm Cortex-M23 MCU | Microchip
Référence : ATSAML11E15A-MF ✓ ActifATSAML11E15A-MF Présentation
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M23 architecture belongs to the Arm Cortex-M product family, which is designed for compact embedded control systems. In the broader hierarchy, this MCU combines a 32-bit RISC processor, nonvolatile program memory, volatile data memory, and communication peripherals in a single low-power device suitable for secure edge and IoT equipment.
Key characteristics include a 32 MHz maximum operating frequency, 32 KB of flash, 8 KB of SRAM, and a 1.62 V to 3.63 V supply range. According to the Microchip product page, active consumption is below 25 uA/MHz and sleep consumption is below 100 nA. These figures support low-duty-cycle designs in which the controller remains asleep between brief measurement, control, or communications activities.
The security architecture is central to the device. Arm TrustZone separates secure and nonsecure software domains, while chip-level security, secure key storage, and tamper resistance help protect credentials and sensitive operations. These functions make the Cortex-M23 platform appropriate for authenticated devices that must establish trust before exchanging data with a host, service, or connected sensor network.
Typical uses include low-power IoT sensor nodes, industrial condition-monitoring equipment, secure access-control peripherals, battery-powered data loggers, and compact security appliances. The 32 KB flash capacity suits moderate firmware images, while the 32-VQFN package supports space-constrained board layouts. The 1.62 V to 3.63 V operating range also allows the MCU to operate across common low-voltage embedded supply rails.
Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, and supported peripheral mix against the manufacturer datasheet before layout release. The small 5 x 5 mm package benefits from careful escape routing, while firmware migration should account for the TrustZone-aware Cortex-M23 architecture and the device's security configuration.
This page combines manufacturer specifications, package and ordering information, practical design guidance, and pin-compatible alternatives to support component selection, PCB planning, firmware review, and sourcing decisions.
Alternatives de remplacement direct pour ATSAML11E15A-MF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATSAML11E15A-MF (même facteur de forme et même empreinte) — différant par Active Current, Package, Sleep Current, Core Architecture, Operating Temperature Range.
ATSAML11E15A-MFKPH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAML11E15A-MUT
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →ATSAML11E16A-MF
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →ATSAML11E17A-MF
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATSAML11E14A-MF
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →ATSAML11E15A-MF Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M23 microcontroller |
| Processor Core | Arm Cortex-M23 |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB |
| Data EEPROM | 2 KB |
| Supply Voltage Range | 1.62 V to 3.63 V |
| Plage de température de fonctionnement | -40 °C to +125 °C |
| Boîtier | 32-VQFN, 5 x 5 mm |
| Terminal Count | 32 terminals |
| Type de montage | No-lead surface mount |
| Active Current | Less than 25 uA/MHz |
| Sleep Current | Less than 100 nA |
| Security Architecture | Arm TrustZone, secure key storage, chip-level tamper resistance |
| Communication Interfaces | I2C, SPI, UART |
| Temperature Grade | Automotive, -40 °C to +125 °C |
| Statut RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Guide de configuration des broches du ATSAML11E15A-MF 32-vqfn, 5 x 5 mm
Configuration des broches du ATSAML11E15A-MF (boîtier 32-vqfn, 5 x 5 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATSAML11E15A-MF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATSAML11E15A-MF convient pour 6 applications: Low-Power IoT Sensor Node, Secure Industrial Condition Monitoring, Battery-Powered Data Logger, Secure Access-Control Peripheral, Connected Security Appliance, Portable Diagnostic Instrument.
Low-Power IoT Sensor Node
The ATSAML11E15A-MF fits compact IoT sensor nodes that periodically read environmental data and transmit results over I2C, SPI, or UART. Its Arm Cortex-M23 core runs at up to 32 MHz, providing enough processing performance for protocol handling and local logic, while the sleep current below 100 nA supports long intervals between activity. The 32 KB flash and 8 KB SRAM provide useful code and working-memory margins. Secure key storage and TrustZone are valuable when the node must protect credentials used during authenticated communication.
Recommandé
Secure Industrial Condition Monitoring
The ATSAML11E15A-MF supports industrial monitoring equipment that collects sensor information, runs local filtering, and reports machine status. Its 1.62 V to 3.63 V operating range accommodates common low-voltage rails, while the -40 °C to +125 °C rating supports wide environmental conditions. The 32 MHz Cortex-M23 core can service multiple serial interfaces, and 8 KB of SRAM provides room for buffers. TrustZone separation can isolate supervisory or diagnostic code from security-sensitive operations.
Recommandé
Battery-Powered Data Logger
A battery-powered data logger can use the ATSAML11E15A-MF to sample sensors, timestamp events, and store information in nonvolatile memory. The MCU's sleep consumption below 100 nA is central to minimizing standby drain, while active consumption below 25 uA/MHz helps control the brief processing intervals. The 32 KB flash can hold the operating firmware and logging configuration. A 32-VQFN 5 x 5 mm package preserves board area, although thermal and decoupling layout remain important.
Recommandé
Secure Access-Control Peripheral
The ATSAML11E15A-MF is suitable for electronic locks, credential readers, and access-control terminals that must process local authentication logic securely. The Cortex-M23 architecture provides Arm TrustZone support, while secure key storage and tamper-resistance features help protect sensitive device operations. Its I2C, SPI, and UART interfaces support readers, secure elements, displays, and host processors. The 32 MHz operating speed and 32 KB flash are appropriate for compact firmware that does not require a large application partition.
Recommandé
Connected Security Appliance
The ATSAML11E15A-MF can serve as the control processor in a compact network-security or cryptographic accessory. TrustZone provides a hardware-assisted boundary between privileged and nonprivileged software, while secure key storage supports protection of locally managed credentials. The 32-bit Cortex-M23 core operates at up to 32 MHz for protocol processing, and the available UART, SPI, and I2C interfaces allow connection to sensors, network interfaces, or secure elements. The small VQFN package supports compact enclosure designs.
Recommandé
Portable Diagnostic Instrument
The ATSAML11E15A-MF is useful in portable diagnostic and measurement instruments where a local processor must coordinate sensors, communications, and a user interface. Its 32 MHz Cortex-M23 core handles protocol conversion and real-time control, while 8 KB of SRAM supports transient measurement data and communication buffers. The 1.62 V to 3.63 V supply range enables operation from compact battery-derived rails. The automotive temperature rating supports harsh environments, although each product still requires its own qualification review.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATSAML11E15A-MF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATSAML11E15A-MFKPH | ATSAML11E15A-MUT | ATSAML11E16A-MF | ATSAML11E17A-MF | ATSAML11E14A-MF |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-VQFN (5x5) | 32-VQFN (5x5) | 32-VQFN (5x5) | 32-VQFN (5x5) | 32-VQFN (5x5) | 32-VQFN (5x5) |
| Processor Core | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 | Arm Cortex-M23 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 48 KB | 64 KB | 16 KB |
Principaux différenciateurs
- Higher flash capacity than the 16 KB family member (vs ATSAML11E14A-MF)
- Documented 32 MHz performance with 8 KB SRAM (vs ATSAML11E15A-MFKPH)
- Low-power operation for duty-cycled embedded systems (vs ATSAML11E16A-MF)
Notes de conception
Reserve the exposed pad as a low-impedance ground connection and follow the manufacturer land pattern for the 32-VQFN 5 x 5 mm package. Place input and output decoupling capacitors close to their designated supply pins, keeping high-current return paths short. Because the package has no external leads, assembly inspection should include exposed-pad solder fill and continuity checks.
Design the 1.62 V to 3.63 V supply path so it remains within the operating range during startup, sleep transitions, and maximum processing load. Avoid voltage overshoot above the device limit when peripheral rails share the source. Verify brownout behavior and power-sequencing requirements in firmware because reset conditions during rail transitions can create unintended peripheral activity.
Keep I2C, SPI, and UART routing away from noisy switching nodes, inductors, and high-current return paths. Use continuous ground references beneath serial interfaces and terminate high-speed or long SPI routes according to the clock rate and peripheral characteristics. Firmware should configure pins for their final function only after the relevant clocks and rails are stable.
Do not assume that every ATSAML11 ordering code is interchangeable merely because its package matches. Confirm the temperature grade, qualification, pin assignments, exposed-pad treatment, and firmware support before substitution. ATSAML11E14A-MF has half the flash of the target and can fail when the complete firmware image, update payload, or boot loader exceeds 16 KB.
Informations de conformité
The device is identified with an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is present in the cited product information.