Microchip Technology

ATSAML11E15A-MF - 32MHz Secure Arm Cortex-M23 MCU | Microchip

部品番号: ATSAML11E15A-MF ✓ 生産中
1.62 V to 3.63 V Vdss Less than 25 uA/MHz Id 32-VQFN, 5 x 5 mm Package 32 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

ATSAML11E15A-MF 概要

The Microchip Technology ATSAML11E15A-MF is a 32-bit Arm Cortex-M23 microcontroller operating at up to 32 MHz, with 32 KB of flash memory, 8 KB of SRAM, and a 32-VQFN 5 x 5 mm package. It combines a compact footprint with chip-level security, Arm TrustZone technology, secure key storage, and tamper-resistance features for connected embedded products.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M23 architecture belongs to the Arm Cortex-M product family, which is designed for compact embedded control systems. In the broader hierarchy, this MCU combines a 32-bit RISC processor, nonvolatile program memory, volatile data memory, and communication peripherals in a single low-power device suitable for secure edge and IoT equipment.

Key characteristics include a 32 MHz maximum operating frequency, 32 KB of flash, 8 KB of SRAM, and a 1.62 V to 3.63 V supply range. According to the Microchip product page, active consumption is below 25 uA/MHz and sleep consumption is below 100 nA. These figures support low-duty-cycle designs in which the controller remains asleep between brief measurement, control, or communications activities.

The security architecture is central to the device. Arm TrustZone separates secure and nonsecure software domains, while chip-level security, secure key storage, and tamper resistance help protect credentials and sensitive operations. These functions make the Cortex-M23 platform appropriate for authenticated devices that must establish trust before exchanging data with a host, service, or connected sensor network.

Typical uses include low-power IoT sensor nodes, industrial condition-monitoring equipment, secure access-control peripherals, battery-powered data loggers, and compact security appliances. The 32 KB flash capacity suits moderate firmware images, while the 32-VQFN package supports space-constrained board layouts. The 1.62 V to 3.63 V operating range also allows the MCU to operate across common low-voltage embedded supply rails.

Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, and supported peripheral mix against the manufacturer datasheet before layout release. The small 5 x 5 mm package benefits from careful escape routing, while firmware migration should account for the TrustZone-aware Cortex-M23 architecture and the device's security configuration.

This page combines manufacturer specifications, package and ordering information, practical design guidance, and pin-compatible alternatives to support component selection, PCB planning, firmware review, and sourcing decisions.

ドロップイン代替品: ATSAML11E15A-MF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: ATSAML11E15A-MF (同一形状・フットプリント) — 相違点: Active Current, Package, Sleep Current, Core Architecture, Operating Temperature Range.

Microchip Technology
Active Current: < 25 uA/MHz
Package: 32-VQFN (5x5 mm) with Exposed Pad
Sleep Current: < 100 nA
比較対象 ATSAML11E15A-MF →
Microchip Technology
Active Current: <25 uA/MHz
Package: 32-pin VQFN (5x5 mm)
Sleep Current: <100 nA
比較対象 ATSAML11E15A-MF →
Microchip Technology
Active Current: <25 µA/MHz
Package: 32-pin VQFN (5x5 mm) with exposed pad
Sleep Current: <100 nA
比較対象 ATSAML11E15A-MF →
Microchip Technology
Active Current: < 25 uA/MHz
Package: 32-VQFN (5x5 mm) with Exposed Pad
Sleep Current: < 100 nA
比較対象 ATSAML11E15A-MF →

ATSAML11E15A-MFKPH

✅ ドロップイン
📦 32-VQFN (5x5)
Same 32 MHz Cortex-M23 core, 32 KB flash, 8 KB SRAM, and 32-VQFN footprint; ordering suffix differs

📋 参考代替品(カタログ未掲載)

ATSAML11E15A-MUT

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 32-VQFN (5x5)
ARM Cortex-M23 with TrustZone · 32-bit · 32 MHz · 32 KB (32K x 8) · 8 KB · 32-pin VQFN (5x5 mm) with exposed pad · Surface Mount

価格はお問い合わせください

データシートを見る →

ATSAML11E16A-MF

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 32-VQFN (5x5)
ARM Cortex-M23 · ARMv8-M Baseline · 32 MHz · 32-bit · 64 KB (64K x 8) · 16 KB · 1.62 V to 3.63 V · < 25 uA/MHz

価格はお問い合わせください

データシートを見る →

ATSAML11E17A-MF

✅ ドロップイン ⚠️ 仕様未検証
📦 32-VQFN (5x5)
Same 32 MHz Cortex-M23 family and 32-VQFN footprint, with 32 KB more flash than ATSAML11E15A-MF

📋 参考代替品(カタログ未掲載)

ATSAML11E14A-MF

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 32-VQFN (5x5)
ARM Cortex-M23 · 32-bit single-core · 32 MHz · 16 KB (16K x 8) Flash · 8 KB SRAM · 1.6 V to 3.6 V · <25 uA/MHz · <100 nA

価格はお問い合わせください

データシートを見る →

ATSAML11E15A-MF 最大定格&電気的特性

Product Type 32-bit ARM Cortex-M23 microcontroller
Processor Core Arm Cortex-M23
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (32K x 8)
SRAM 8 KB
Data EEPROM 2 KB
Supply Voltage Range 1.62 V to 3.63 V
動作温度範囲 -40 °C to +125 °C
パッケージ 32-VQFN, 5 x 5 mm
Terminal Count 32 terminals
実装タイプ No-lead surface mount
Active Current Less than 25 uA/MHz
Sleep Current Less than 100 nA
Security Architecture Arm TrustZone, secure key storage, chip-level tamper resistance
Communication Interfaces I2C, SPI, UART
Temperature Grade Automotive, -40 °C to +125 °C
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification unknown

ATSAML11E15A-MF 32-vqfn, 5 x 5 mm ピン配置ガイド

ATSAML11E15A-MF (32-vqfn, 5 x 5 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

ATSAML11E15A-MF の 32-vqfn, 5 x 5 mm パッケージピン配置図

詳細なピン配置データはありません: ATSAML11E15A-MF.

詳細は データシート をご参照ください。

主な用途

ATSAML11E15A-MF の用途: 6 件s: Low-Power IoT Sensor Node, Secure Industrial Condition Monitoring, Battery-Powered Data Logger, Secure Access-Control Peripheral, Connected Security Appliance, Portable Diagnostic Instrument.

🧩

Low-Power IoT Sensor Node

The ATSAML11E15A-MF fits compact IoT sensor nodes that periodically read environmental data and transmit results over I2C, SPI, or UART. Its Arm Cortex-M23 core runs at up to 32 MHz, providing enough processing performance for protocol handling and local logic, while the sleep current below 100 nA supports long intervals between activity. The 32 KB flash and 8 KB SRAM provide useful code and working-memory margins. Secure key storage and TrustZone are valuable when the node must protect credentials used during authenticated communication.

🏭

Secure Industrial Condition Monitoring

The ATSAML11E15A-MF supports industrial monitoring equipment that collects sensor information, runs local filtering, and reports machine status. Its 1.62 V to 3.63 V operating range accommodates common low-voltage rails, while the -40 °C to +125 °C rating supports wide environmental conditions. The 32 MHz Cortex-M23 core can service multiple serial interfaces, and 8 KB of SRAM provides room for buffers. TrustZone separation can isolate supervisory or diagnostic code from security-sensitive operations.

⚡

Battery-Powered Data Logger

A battery-powered data logger can use the ATSAML11E15A-MF to sample sensors, timestamp events, and store information in nonvolatile memory. The MCU's sleep consumption below 100 nA is central to minimizing standby drain, while active consumption below 25 uA/MHz helps control the brief processing intervals. The 32 KB flash can hold the operating firmware and logging configuration. A 32-VQFN 5 x 5 mm package preserves board area, although thermal and decoupling layout remain important.

🔒

Secure Access-Control Peripheral

The ATSAML11E15A-MF is suitable for electronic locks, credential readers, and access-control terminals that must process local authentication logic securely. The Cortex-M23 architecture provides Arm TrustZone support, while secure key storage and tamper-resistance features help protect sensitive device operations. Its I2C, SPI, and UART interfaces support readers, secure elements, displays, and host processors. The 32 MHz operating speed and 32 KB flash are appropriate for compact firmware that does not require a large application partition.

🌐

Connected Security Appliance

The ATSAML11E15A-MF can serve as the control processor in a compact network-security or cryptographic accessory. TrustZone provides a hardware-assisted boundary between privileged and nonprivileged software, while secure key storage supports protection of locally managed credentials. The 32-bit Cortex-M23 core operates at up to 32 MHz for protocol processing, and the available UART, SPI, and I2C interfaces allow connection to sensors, network interfaces, or secure elements. The small VQFN package supports compact enclosure designs.

🩺

Portable Diagnostic Instrument

The ATSAML11E15A-MF is useful in portable diagnostic and measurement instruments where a local processor must coordinate sensors, communications, and a user interface. Its 32 MHz Cortex-M23 core handles protocol conversion and real-time control, while 8 KB of SRAM supports transient measurement data and communication buffers. The 1.62 V to 3.63 V supply range enables operation from compact battery-derived rails. The automotive temperature rating supports harsh environments, although each product still requires its own qualification review.

おすすめ製品の概要

ATSAML11E15A-MFKPH Same-device ordering variant for qualification review 使用用途: Low-Power IoT Sensor Node, Battery-Powered Data Logger, Connected Security Appliance ATSAML11E16A-MF Microchip Technology 使用用途: Low-Power IoT Sensor Node, Secure Access-Control Peripheral, Portable Diagnostic Instrument ATSAML11E15A-MUT Microchip Technology 使用用途: Secure Industrial Condition Monitoring, Secure Access-Control Peripheral ATSAML11E17A-MF Same-family option for larger firmware and update images 使用用途: Secure Industrial Condition Monitoring, Connected Security Appliance ATSAML11E14A-MF Microchip Technology 使用用途: Battery-Powered Data Logger, Portable Diagnostic Instrument
What are the key specifications of ATSAML11E15A-MF that engineers should know?
The ATSAML11E15A-MF integrates an Arm Cortex-M23 core, 32 KB of flash memory, 8 KB of SRAM, and 2 KB of data EEPROM in a 32-VQFN 5 x 5 mm package. According to the Microchip product page, it operates at up to 32 MHz across a 1.62 V to 3.63 V supply range, with active current below 25 uA/MHz and sleep current below 100 nA.
What is the operating voltage of ATSAML11E15A-MF?
The ATSAML11E15A-MF operates from 1.62 V to 3.63 V. This range supports low-voltage embedded systems and allows the MCU to share a supply domain with common 3.3 V peripherals. The manufacturer product page and the published device specifications identify the Cortex-M23 MCU as a compact, low-power member of the SAM L11 family.
What is the maximum clock speed of ATSAML11E15A-MF?
The maximum CPU frequency of ATSAML11E15A-MF is 32 MHz. Its Arm Cortex-M23 core provides 32-bit RISC processing for embedded control, sensor acquisition, communications, and low-power management tasks. The 32 MHz operating point is one of the key identifiers shown by the manufacturer and distributor product records for this device.
How much memory does ATSAML11E15A-MF have?
The ATSAML11E15A-MF provides 32 KB of flash memory, 8 KB of SRAM, and 2 KB of data EEPROM. The 32 KB flash region supports the embedded firmware image, while SRAM accommodates stack space, working variables, and peripheral buffers. Distributor records identify the flash organization as 32K x 8.
Where to download the ATSAML11E15A-MF datasheet PDF?
The ATSAML11E15A-MF technical documentation is accessed through the official Microchip ATSAML11E15A product page linked on this page. Open the product page and select its Documentation section for the manufacturer datasheet, pin description, package drawing, and electrical characteristics. The product page identifies the exact device family and ordering code.
Where can I find the ATSAML11E15A-MF pinout?
The ATSAML11E15A-MF pinout is found in the pin-description table and package drawing in the Microchip manufacturer datasheet. The device uses a 32-VQFN 5 x 5 mm package with an exposed thermal pad. Use that documentation for the complete numbered assignments and exposed-pad connection before assigning PCB tracks.
What security features are built into ATSAML11E15A-MF?
The ATSAML11E15A-MF includes Arm TrustZone technology, chip-level security, secure key storage, and chip-level tamper resistance. According to the Microchip product page, these features support isolation of security-sensitive software and protection of embedded credentials. They are particularly relevant to connected devices that authenticate firmware or exchange sensitive information.
Where to buy ATSAML11E15A-MF online?
Use the Request a Quote form on this page to request ATSAML11E15A-MF availability, order quantity, and current lead time. The quote team can confirm the exact 32-VQFN ordering code, tray packaging, and delivery schedule without relying on a static listing price. The target device is identified as ATSAML11E15A-MF, not the base ATSAML11E15A designation.
What is the price of ATSAML11E15A-MF?
Current ATSAML11E15A-MF pricing is handled through the Request a Quote form on this page. Submit the required quantity and delivery location to receive a current quotation for the exact MPN and package. This approach avoids stale prices and also allows the supplier to confirm tray availability, minimum order quantity, and shipment timing.
What is the lead time for ATSAML11E15A-MF?
Request the current ATSAML11E15A-MF lead time with the Request a Quote form on this page. Include your required quantity, target date, and shipment destination so manufacturing and inventory status can be checked for the exact ordering code. ATSAML11E15A-MF is supplied in a 32-VQFN 5 x 5 mm package.
Is ATSAML11E15A-MF in stock?
Current ATSAML11E15A-MF stock should be confirmed through the Request a Quote form on this page. The distributor product record identifies the exact 32-VQFN device and reports that it ships, but inventory can change with order volume and production timing. A quotation request provides the most direct confirmation for your quantity and delivery schedule.
ATSAML11E15A-MF vs ATSAML11E15A-MFKPH - which is better for an industrial design?
ATSAML11E15A-MF and ATSAML11E15A-MFKPH both use a 32-VQFN 5 x 5 mm package and provide a 32-bit Arm Cortex-M23 MCU with 32 KB of flash. The defining ordering-code difference is the temperature-grade or package suffix. ATSAML11E15A-MF is identified with the -125 °C automotive temperature range and tray packaging, while MFKPH should be selected according to its own qualification and order requirements.
What is the difference between ATSAML11E15A-MF and ATSAML11E15A-MUT?
ATSAML11E15A-MF and ATSAML11E15A-MUT are both listed as 32-bit Cortex-M23 MCUs with 32 KB of flash in 32-VQFN packages. Their ordering suffixes distinguish the specified grade and packing configuration. For an exact drop-in decision, compare the temperature range, qualification, tray or tape-and-reel format, and the manufacturer pin table before approving either part.
When should I choose ATSAML11E15A-MF over a lower-memory ATSAML11 variant?
Choose ATSAML11E15A-MF when the firmware, protocol stack, or security services need more than the 16 KB offered by the ATSAML11E14A-MF. The selected device provides 32 KB of flash and 8 KB of SRAM at 32 MHz. Use the lower-memory variant only when its complete application image, update mechanism, and stack requirements have been measured against those limits.
What is the best drop-in replacement for ATSAML11E15A-MF?
ATSAML11E15A-MFKPH is the closest documented replacement because it retains the 32-VQFN 5 x 5 mm package, 32 MHz Cortex-M23 core, 32 KB flash, and 8 KB SRAM. Confirm its exact temperature grade, qualification, exposed-pad requirements, and ordering suffix against the original device before production release. ATSAML11E16A-MF and ATSAML11E17A-MF add flash capacity but require firmware and memory-margin review.
Can another manufacturer replace ATSAML11E15A-MF without PCB changes?
No cross-brand, pin-compatible replacement is established for the ATSAML11E15A-MF by the available component records. A 32-VQFN outline alone does not guarantee compatibility because peripheral assignments, TrustZone implementation, clocking, security hardware, and firmware startup can differ. A no-change PCB substitution requires a manufacturer-specific cross-reference and complete electrical and firmware validation.

エンジニアリング参考データ: ATSAML11E15A-MF — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ATSAML11E15A-MF when the design needs a compact 32-bit Cortex-M23 controller with 32 KB of flash, 8 KB of SRAM, TrustZone support, and a 1.62 V to 3.63 V operating range. It is a strong fit for secure low-power IoT, industrial monitoring, access-control, and diagnostic products. ATSAML11E15A-MFKPH is the closest documented drop-in candidate for procurement or qualification review, provided its suffix-specific requirements are confirmed. ATSAML11E15A-MUT offers the same core, memory, and footprint with a different grade suffix. ATSAML11E16A-MF and ATSAML11E17A-MF are preferable when larger firmware images or update mechanisms justify 48 KB or 64 KB of flash. ATSAML11E14A-MF should only be selected after confirming that the complete firmware, bootloader, and update payload fit within 16 KB. No cross-brand drop-in replacement is established; changing MCU vendors would require package, peripheral, security, and firmware validation.

代替品との比較

パラメータ この製品 ATSAML11E15A-MFKPH ATSAML11E15A-MUT ATSAML11E16A-MF ATSAML11E17A-MF ATSAML11E14A-MF
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-VQFN (5x5) 32-VQFN (5x5) 32-VQFN (5x5) 32-VQFN (5x5) 32-VQFN (5x5) 32-VQFN (5x5)
Processor Core Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23 Arm Cortex-M23
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 32 KB 48 KB 64 KB 16 KB

主な差別化要因

  • Higher flash capacity than the 16 KB family member (vs ATSAML11E14A-MF)
  • Documented 32 MHz performance with 8 KB SRAM (vs ATSAML11E15A-MFKPH)
  • Low-power operation for duty-cycled embedded systems (vs ATSAML11E16A-MF)

設計ノート

Reserve the exposed pad as a low-impedance ground connection and follow the manufacturer land pattern for the 32-VQFN 5 x 5 mm package. Place input and output decoupling capacitors close to their designated supply pins, keeping high-current return paths short. Because the package has no external leads, assembly inspection should include exposed-pad solder fill and continuity checks.

Design the 1.62 V to 3.63 V supply path so it remains within the operating range during startup, sleep transitions, and maximum processing load. Avoid voltage overshoot above the device limit when peripheral rails share the source. Verify brownout behavior and power-sequencing requirements in firmware because reset conditions during rail transitions can create unintended peripheral activity.

Keep I2C, SPI, and UART routing away from noisy switching nodes, inductors, and high-current return paths. Use continuous ground references beneath serial interfaces and terminate high-speed or long SPI routes according to the clock rate and peripheral characteristics. Firmware should configure pins for their final function only after the relevant clocks and rails are stable.

Do not assume that every ATSAML11 ordering code is interchangeable merely because its package matches. Confirm the temperature grade, qualification, pin assignments, exposed-pad treatment, and firmware support before substitution. ATSAML11E14A-MF has half the flash of the target and can fail when the complete firmware image, update payload, or boot loader exceeds 16 KB.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The device is identified with an automotive temperature grade, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is present in the cited product information.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ATSAML11E15A-MF datasheet ATSAML11E15A-MF pinout ATSAML11E15A-MF datasheet pdf ATSAML11E15A-MF specifications ATSAML11E15A-MF price ATSAML11E15A-MF stock ATSAML11E15A-MF equivalent ATSAML11E15A-MF replacement ATSAML11E15A-MF vs ATSAML11E14A-MF Microchip ATSAML11E15A-MF ATSAML11E15A-MF 32 VQFN footprint ATSAML11E15A-MF TrustZone application

関連部品&用語

Microchip Technology ATSAML11E15A-MF ATSAML11E15A ATSAML11E15A-MFKPH ATSAML11E15A-MUT ATSAML11E16A-MF ATSAML11E17A-MF ATSAML11E14A-MF Arm Cortex-M23 Arm Cortex-M Arm TrustZone 32-bit RISC microcontroller SAM L11 32-VQFN QFN package family surface-mount semiconductor 32 KB flash memory 8 KB SRAM 2 KB data EEPROM 1.62 V to 3.63 V 32 MHz I2C SPI UART IoT sensor node secure key storage
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示