ATSAMS70N20A-CN - 300MHz Cortex-M7 MCU | Microchip
Référence : ATSAMS70N20A-CN ✓ ActifATSAMS70N20A-CN Présentation
A flash microcontroller is a semiconductor device that combines a processor core, program memory, data memory, and peripherals in one integrated circuit. The ARM Cortex-M7 architecture used by the ATSAMS70N20 family supports efficient instruction execution and floating-point calculations. Within the product hierarchy, this device is a 32-bit MCU, an embedded processing semiconductor, and a member of Microchip's SAM S70 high-performance microcontroller family.
The device's 300 MHz operating frequency provides substantial processing headroom for protocol handling, real-time control, and signal-processing tasks. Its 1 MB Flash stores firmware and application code, while 384 KB of SRAM supports working memory, data buffers, Ethernet frame handling, and display or communications workloads. The industrial temperature grade is identified for the ATSAMS70N20A-CN ordering configuration, and the package uses the compact LFBGA-100/TFBGA-100 form factor for high-density PCB layouts.
Compared with smaller Cortex-M4 microcontrollers, the Cortex-M7 core and larger memory resources support more demanding embedded workloads while retaining a familiar embedded software model. The SAM S70 family is intended for applications requiring fast control loops and high-bandwidth peripheral traffic, particularly where communication protocols and real-time processing must coexist on one microcontroller.
Typical uses include industrial automation controllers, building automation gateways, connected measurement equipment, motor-control systems, network-interface equipment, and high-speed data-acquisition nodes. The combination of 384 KB SRAM and 300 MHz execution is especially useful where multiple serial interfaces, protocol stacks, and deterministic control loops must operate without relying on a separate processor.
PCB implementation should follow the manufacturer's ball assignment, land pattern, and power-decoupling guidance because the 100-ball package has fine-pitch interconnects and multiple supply requirements. Keep high-speed and sensitive signals away from noisy switching nodes, provide local bulk and high-frequency decoupling at each supply pin, and validate the assembled board for signal integrity, thermal performance, and manufacturing compatibility.
This page combines the manufacturer family specifications, distributor package and memory data, and practical selection guidance with same-package alternatives for engineers evaluating the ATSAMS70N20A-CN for a new 300 MHz Cortex-M7 design.
Alternatives de remplacement direct pour ATSAMS70N20A-CN — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec ATSAMS70N20A-CN (même facteur de forme et même empreinte) — différant par Package, Mounting Type, Core, SRAM, ADC.
ATSAMS70N19A-CN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATSAMS70N21A-CN
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →ATSAMV70N20B-CBVAO
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAMV70N20B-CBT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
ATSAMS70N18A-CN
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
ATSAMS70N20A-CN Valeurs maximales et caractéristiques électriques
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Processor Core | ARM Cortex-M7 with Floating Point Unit |
| Maximum Operating Frequency | 300 MHz |
| Flash Memory | 1 MB (1M x 8) |
| SRAM | 384 KB |
| Architecture | 32-bit |
| Supply Voltage Range | 1.08 V to 3.6 V |
| Boîtier | 100-ball TFBGA, 9 mm x 9 mm |
| Package Code | TFBGA |
| Terminal Count | 100 terminals |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Type de montage | Surface mount |
| AEC-Q100 Qualification | Not applicable |
Guide de configuration des broches du ATSAMS70N20A-CN square
Configuration des broches du ATSAMS70N20A-CN (boîtier square). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour ATSAMS70N20A-CN.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
ATSAMS70N20A-CN convient pour 6 applications: Industrial Automation Controller, Connected Building Automation Gateway, High-Speed Data Acquisition Node, Motor Control and Power Conversion, Network Interface Equipment, Test and Measurement Instrument.
Industrial Automation Controller
The ATSAMS70N20A-CN fits industrial automation controllers that combine fast deterministic loops with several communication peripherals. Its 300 MHz Cortex-M7 processor provides processing headroom for motor algorithms, condition monitoring, and protocol handling, while 384 KB of SRAM accommodates task stacks and communication buffers. The 1 MB of Flash provides twice the program storage of the 512 KB-class family option. Use the device in a 1.08 V to 3.6 V system with local supply decoupling and a validated 100-ball TFBGA land pattern. Its principal benefit versus a 100 MHz Cortex-M4 MCU is roughly three times the clock rate, although final control-loop performance also depends on the peripherals, compiler, and real-time software architecture.
Recommandé
Connected Building Automation Gateway
The ATSAMS70N20A-CN is suitable for a building-automation gateway that must manage sensor traffic, local control, and network protocols concurrently. The 300 MHz Cortex-M7 core handles protocol processing efficiently, and the 384 KB SRAM reduces dependence on external memory for packet buffers and real-time working sets. Its 1 MB Flash supports a larger firmware image than the 512 KB N19 family variant. The 100-ball TFBGA package also permits a compact module design, but fine-pitch routing and ball-to-ball escape remain PCB constraints. Compared with a 100 MHz Cortex-M4 alternative, this device offers 200% more clock frequency, which is useful when several communication stacks and control tasks must coexist without excessive CPU contention.
Recommandé
High-Speed Data Acquisition Node
The ATSAMS70N20A-CN supports high-speed data-acquisition nodes that combine sensor conditioning, digital filtering, and local data transfer. Its 300 MHz floating-point-capable Cortex-M7 architecture is useful for filtering and real-time processing before data is buffered or transmitted. The 384 KB of SRAM supports working buffers, while 1 MB of Flash provides room for firmware, configuration tables, and update logic. Compared with the 512 KB Flash configuration, the target offers 100% more program storage without changing the 100-ball package. The principal engineering trade-off is fine-pitch BGA assembly, so use the manufacturer land pattern, preserve ball access for inspection, and place decoupling close to every required supply ball.
Recommandé
Motor Control and Power Conversion
The ATSAMS70N20A-CN fits motor-control and power-conversion controllers requiring fast computation for current sampling, transformation algorithms, and supervisory control. The 300 MHz Cortex-M7 with FPU improves the throughput available for floating-point control calculations, and 384 KB of SRAM can support sampled-data buffers and task state. The 1 MB Flash capacity is 100% greater than the 512 KB-class family option, allowing larger algorithms and diagnostics to coexist. Its industrial-grade identification supports industrial equipment design, although exact junction and ambient limits must be checked. PCB implementation should isolate switching power stages from sensitive analog paths, use short current-sense routes, and follow the manufacturer decoupling and grounding guidance.
Recommandé
Network Interface Equipment
The ATSAMS70N20A-CN is appropriate for network-interface equipment that must maintain multiple data streams and execute protocol or packet-processing tasks in real time. The 300 MHz Cortex-M7 core provides substantial compute margin, while 384 KB of SRAM is suitable for packet queues and networking stacks. Its 1 MB Flash offers twice the storage of the 512 KB N19 configuration, which can simplify inclusion of secure-boot code, diagnostics, and dual-bank update mechanisms. The same TFBGA-100 package allows product variants to share a PCB footprint, but software migration still requires a peripheral and pin-function review. For network equipment, route high-speed signals over continuous reference planes and validate return paths, crosstalk, and connector transitions during signal-integrity analysis.
Recommandé
Test and Measurement Instrument
The ATSAMS70N20A-CN can serve as the control processor in a test and measurement instrument that coordinates acquisition, calibration, and front-panel or communications functions. At 300 MHz, the Cortex-M7 core can process control logic concurrently with high-throughput data movement, while the FPU supports numerical calculations. The 384 KB SRAM and 1 MB Flash balance embedded code size with working memory, and the 100-ball package supports compact instrumentation designs. Relative to the 256 KB Flash family variant, the target offers 300% more program storage. Engineering care is required because the BGA footprint complicates prototype rework; use the manufacturer land pattern, confirm assembly capability, and isolate analog sections with careful grounding and return-path planning.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour ATSAMS70N20A-CN — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | ATSAMS70N19A-CN | ATSAMS70N21A-CN | ATSAMV70N20B-CBVAO | ATSAMV70N20B-CBT | ATSAMS70N18A-CN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | TFBGA-100 (9x9 mm) | TFBGA-100 (9x9 mm) | TFBGA-100 (9x9 mm) | TFBGA-100 (9x9 mm) | TFBGA-100 (9x9 mm) | TFBGA-100 (9x9 mm) |
| Processor Core | ARM Cortex-M7 with FPU | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 | ARM Cortex-M7 |
| Maximum Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| SRAM | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB | 384 KB |
Principaux différenciateurs
- Balanced 1 MB Flash configuration for embedded firmware (vs ATSAMS70N19A-CN)
- Substantially more program storage than the entry-level family variant (vs ATSAMS70N18A-CN)
- Lower memory demand than the larger Flash configuration (vs ATSAMS70N21A-CN)
- Industrial configuration with automotive-qualified same-package path (vs ATSAMV70N20B-CBVAO)
Notes de conception
Use the Microchip ATSAMS70N20 package drawing and land pattern rather than a generic 100-ball BGA footprint. Confirm ball-pitch dimensions, solder-mask and paste geometry, via-in-pad requirements, and the exposed-pad connection before releasing artwork. Route decoupling directly from each supply ball to its capacitor ground reference, and avoid placing sensitive traces beneath noisy power-conversion stages.
Separate core, I/O, and analog supply requirements according to the manufacturer pin table, then place local high-frequency and bulk capacitors at the corresponding balls. Keep the return path short and continuous under the device. Because the 300 MHz core can create fast current edges, supply-impedance planning and point-of-load placement can affect stability and noise performance as much as nominal output decoupling.
Keep clock, high-speed serial, and memory-routing interfaces over continuous reference planes, with adequate via stitching and no unnecessary plane transitions. Match trace lengths where the selected interface specifies timing margins, and avoid routing adjacent to switching-node copper. Validate the final stack-up with the manufacturer interface requirements and perform signal-integrity simulation for the highest-rate interfaces.
Estimated: the maximum device dissipation and allowable ambient temperature depend on the exact package construction, PCB copper, airflow, and operating mode, so calculate dissipation for the selected clock, voltage, and peripheral load rather than applying a generic thermal figure. Use the manufacturer power and thermal tables, preserve exposed-pad copper, and confirm junction temperature under worst-case supply voltage and sustained high-performance operation.
Do not treat a package-compatible family variant as an automatic substitute. Review startup behavior, clock-tree differences, peripheral-instance availability, pin multiplexing, memory organization, firmware device definitions, and qualification requirements. A PCB that fits the same TFBGA-100 footprint still needs electrical and software validation before production use.
Informations de conformité
The exact ATSAMS70N20A-CN ordering code was not accompanied by a RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration. A separate ATSAMS70N20A-AN listing states RoHS3 compliance, but that listing was not used to assign compliance to ATSAMS70N20A-CN.