Broadcom

BCM53115MKFBG - 7-Port Gigabit Ethernet Switch | Broadcom

Référence : BCM53115MKFBG ✓ Actif
400-ball BGA, square Package
MOQ : 1 |

BCM53115MKFBG Présentation

The Broadcom BCM53115MKFBG is a seven-port Gigabit Ethernet switch with integrated Gigabit PHYs, built in 65 nm low-power CMOS technology. It is designed for Ethernet access, aggregation, and embedded networking equipment where a single switching device can provide multiple copper Gigabit Ethernet ports. The device also requires supporting power, clock, reset, management-interface, and magnetic-component connections to operate correctly in a complete network design.

A Gigabit Ethernet switch is a networking semiconductor that forwards Ethernet frames between connected ports while supporting full-duplex communication, auto-negotiation, and traffic management. In the broader hierarchy, it belongs to Ethernet interface ICs, then network interface controllers and switching silicon, and ultimately the semiconductor category. Integrated PHYs reduce the external active Ethernet component count, although magnetics, termination, isolation, and layout requirements still shape the final board design.

The BCM53115MKFBG provides seven Gigabit Ethernet ports, integrated PHYs, 65 nm LP CMOS implementation, and a 400-ball BGA package. Its integration can simplify multi-port equipment compared with a design assembled from several discrete Ethernet interface components. The compact BGA footprint also requires careful PCB routing, thermal analysis, and manufacturing controls because its fine-pitch balls and exposed underside area demand precise layout practices.

The device is applicable to industrial Ethernet switches, router and gateway platforms, broadband access equipment, network surveillance systems, and other multi-port products. For each PHY-facing port, the board must provide the appropriate magnetic interface or supported copper-media interface, power supplies, and controlled-impedance routing. System designers should also validate timing, thermal performance, firmware support, and management features against the Broadcom datasheet and reference designs.

Because the BCM53115MKFBG is a BGA device, layout is a central part of successful implementation. Place decoupling close to the relevant supply pins, keep high-speed traces short, provide adequate reference planes, route differential pairs with controlled impedance, and use an appropriate via field and ball-to-trace transition. PCB assembly should be qualified for the package density and thermal profile used in the finished product.

This page summarizes the verified 7-port Gigabit Ethernet switch identity, records the available package and process information, and identifies practical evaluation points for replacement and hardware design. Detailed electrical limits, register behavior, timing, clock requirements, and absolute maximum ratings should be taken directly from the current Broadcom manufacturer datasheet before schematic release or production qualification.

Alternatives de remplacement direct pour BCM53115MKFBG — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec BCM53115MKFBG (même facteur de forme et même empreinte).

BCM53115MKPBG

✅ Remplacement direct
📦 400-ball BGA
Ordering-code difference requires confirmation; port count and integrated-PHY count remain seven, while exact electrical and temperature limits require manufacturer comparison

📋 Alternative de référence (hors catalogue)

BCM53115MKFB

✅ Remplacement direct
📦 400-ball BGA
Ordering-code difference requires confirmation; both are BCM53115 7-port Gigabit Ethernet devices with integrated PHYs, but exact suffix-specific limits require verification

📋 Alternative de référence (hors catalogue)

88E6190X

✅ Remplacement direct
📦 400-ball BGA
Alternative 7-port Gigabit Ethernet switching architecture with integrated PHYs; package, ball map, clock, management, and electrical differences require full design validation

📋 Alternative de référence (hors catalogue)

KSZ9893RNXI

✅ Remplacement direct
Microchip Technology
📦 400-ball BGA
3-Port Gigabit Ethernet Switch with integrated PHYs · 3 (2x integrated PHY + 1x MAC interface) · 10/100/1000 Base-TX IEEE 802.3 · RGMII / MII / RMII (configurable) · SPI, I2C, MII, RMII · IEEE 802.3, IEEE 802.3az (EEE), IEEE 1588v2 · LinkMD (TDR-based) · Yes (WOL)

Contactez-nous pour le prix

Voir la fiche technique →

RTL838X

✅ Remplacement direct
📦 400-ball BGA
Alternative integrated-PHY Ethernet switching family; exact suffix, port configuration, pinout, and electrical requirements must be matched before substitution

📋 Alternative de référence (hors catalogue)

BCM53115MKFBG Valeurs maximales et caractéristiques électriques

Product Type 7-port Gigabit Ethernet switch with integrated PHYs
Number of Gigabit Ethernet Ports 7 ports
Integrated PHY Count 7 integrated Gigabit PHYs
Process Technology 65 nm LP CMOS
Package Type 400-ball BGA, square
Number of Terminals 400 terminals
Device Category Ethernet interface IC / switching IC
Ethernet Data Rate 1 Gb/s per port
Statut RoHS Compliant
Type de montage Surface mount

Guide de configuration des broches du BCM53115MKFBG 400-ball bga, square

Configuration des broches du BCM53115MKFBG (boîtier 400-ball bga, square). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 400-ball bga, square pour le BCM53115MKFBG

Aucune donnée de brochage détaillée disponible pour BCM53115MKFBG.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

BCM53115MKFBG convient pour 6 applications: Industrial Ethernet Switch, Router and Gateway Platform, Broadband Access Equipment, Network Surveillance System, Embedded Network Controller, Network Test Equipment.

🏭

Industrial Ethernet Switch

The BCM53115MKFBG fits industrial Ethernet switch platforms requiring seven Gigabit Ethernet ports in one switching IC. Its seven integrated PHYs provide the physical-layer functions for copper media interfaces while reducing the number of separate transceiver blocks. A board designer must still implement compliant Ethernet magnetics or supported media circuitry, controlled-impedance routing, robust power distribution, and surge protection appropriate to the installation environment. The 400-ball BGA also makes PCB density, via-in-pad decisions, assembly yield, and thermal verification central parts of an industrial design. Before release, verify temperature range, power-loss behavior, recovery features, and management requirements against the manufacturer documentation.

🌐

Router and Gateway Platform

A seven-port Gigabit Ethernet arrangement is useful in routers, gateways, and edge appliances where several wired endpoints must connect to a central forwarding engine. The BCM53115MKFBG combines seven Gigabit PHYs with the Ethernet switching function in 65 nm LP CMOS silicon, supporting a compact multi-port architecture. The design must accommodate the required clock, management interface, reset behavior, and power rails while keeping the 400-ball BGA routing orderly. Magnetic components and copper-media compliance remain board-level concerns, and the enclosure, thermal environment, and traffic load should be tested with the intended switch configuration.

📡

Broadband Access Equipment

The BCM53115MKFBG can serve as the seven-port Gigabit switching element in broadband access and customer-premises equipment that aggregates multiple wired connections. Integrated PHYs allow the equipment architect to establish several 1 Gb/s copper-facing ports around one switching device rather than using multiple standalone transceivers. Because access products often depend on strict interoperability and line-card power behavior, the implementation should follow the Broadcom reference design for clocks, decoupling, media interfaces, and thermal construction. Validate boot sequencing, management behavior, fault recovery, and electromagnetic performance in the complete enclosure rather than relying on IC-level simulation alone.

🎥

Network Surveillance System

The BCM53115MKFBG is suitable for a networked camera or surveillance controller that needs several Gigabit Ethernet links for cameras, recorders, and uplink equipment. The seven integrated PHYs offer a path to a compact seven-port topology without requiring seven separate multi-port interface blocks. The finished surveillance product must account for cable reach, isolation, surge events, grounding, and power-loss behavior, while the 400-ball BGA needs careful decoupling, thermal relief, and assembly yield management. The seven-port configuration also allows efficient segmentation of cameras and uplinks when the Broadcom management and traffic-control features match the system requirements.

🖥️

Embedded Network Controller

The BCM53115MKFBG can provide a multi-port wired-network front end for an embedded controller, test appliance, or industrial computing platform. Seven integrated Gigabit PHYs create a common switching endpoint for service equipment, test instruments, or local peripherals connected over Ethernet. The system designer should confirm clock sources, firmware requirements, management interfaces, and PHY register configuration before finalizing the architecture. PCB implementation should preserve high-speed signal integrity through short references, appropriate return paths, controlled-impedance differential routing, and dense decoupling around the BGA. Thermal performance should be evaluated with the expected sustained port traffic and the complete enclosure rather than under an isolated-device test condition.

🧰

Network Test Equipment

A seven-port Gigabit switching device is useful in test and measurement equipment that must provide multiple physical network connections for traffic generation, loopback analysis, or endpoint simulation. The BCM53115MKFBG offers seven integrated PHYs in 65 nm LP CMOS, allowing a compact instrument architecture with multiple active copper interfaces. Precise clocking, deterministic startup, port-status monitoring, and reliable thermal operation become important in laboratory and production-test environments. The 400-ball package requires a high-density PCB with validated assembly processes, and the Ethernet media interfaces must be designed for the cable lengths and isolation requirements of the target test environment.

What is the BCM53115MKFBG?
The Broadcom BCM53115MKFBG is a seven-port Gigabit Ethernet switch with integrated Gigabit PHYs, manufactured in 65 nm LP CMOS technology and supplied in a 400-ball BGA package. Its primary role is to connect several Gigabit Ethernet ports within routers, industrial switches, access equipment, and embedded networking platforms. Use the Broadcom manufacturer datasheet for the authoritative register map, timing, electrical limits, and recommended reference circuits.
How many Ethernet ports does the BCM53115MKFBG provide?
The BCM53115MKFBG provides seven Gigabit Ethernet ports with integrated PHYs. Its 1 Gb/s-per-port identity makes it appropriate for systems that need several copper Ethernet connections consolidated into one switching IC. The integrated PHYs reduce the number of separate Ethernet transceiver blocks, but the completed design still requires suitable magnetics or supported media-interface circuitry, power delivery, and controlled-impedance PCB routing.
What package does the BCM53115MKFBG use?
The BCM53115MKFBG uses a square 400-ball BGA package with 400 terminals. This is a fine-pitch surface-mount package intended for multilayer PCB assembly and careful manufacturing control. Before committing a board layout, use the manufacturer pinout and land pattern to confirm ball assignments, exposed thermal-pad requirements, via-in-pad policy, solder-mask and paste design, and assembly-process capability.
Where can I download the BCM53115MKFBG datasheet PDF?
The BCM53115MKFBG datasheet can be reached through the Octopart datasheet listing at https://octopart.com/datasheet/broadcom/BCM53115MKFBG, which links to the latest Broadcom documentation. Download the manufacturer PDF rather than relying on a distributor summary, because register definitions, timing diagrams, electrical characteristics, and pin assignments are the critical documents for schematic and layout validation.
Where can I find the BCM53115MKFBG pinout and BGA land pattern?
The BCM53115MKFBG pinout and recommended land pattern should be obtained from the current Broadcom datasheet and package drawing for the 400-ball BGA. Because every ball assignment affects power, clocks, interfaces, and PHY connections, do not reconstruct the footprint from a catalog entry. Confirm the exact ball map, thermal-pad treatment, and manufacturing tolerances directly against the official package documentation.
Is the BCM53115MKFBG suitable for an industrial Ethernet switch?
The BCM53115MKFBG is suitable for an industrial Ethernet switch when its seven integrated Gigabit ports match the required port count and its electrical, thermal, lifecycle, and software requirements are acceptable. Industrial products still need qualified power supplies, Ethernet magnetics, surge protection, isolation as required, and environmental validation. The 65 nm LP CMOS process and BGA package do not by themselves establish industrial temperature or reliability grade.
What process technology is used in the BCM53115MKFBG?
The BCM53115MKFBG is manufactured in 65 nm LP CMOS technology. This identifies the process generation and low-power-oriented CMOS implementation associated with the Ethernet switch. Process technology should not be treated as a complete reliability grade or performance guarantee; verify operating-temperature limits, ESD ratings, isolation requirements, and production qualifications in the manufacturer documentation and the finished-equipment validation plan.
How does the BCM53115MKFBG compare with BCM53115MKPBG?
The BCM53115MKFBG and BCM53115MKPBG are both identified as Broadcom BCM53115-series Ethernet devices, but the available listing does not establish that they are pin-to-pin drop-in equivalents. Their exact ordering codes can represent different package, temperature, or qualification options. Compare the full manufacturer ordering table, pin assignment, electrical limits, and device revision before substituting one for the other on an existing PCB.
What is the best drop-in replacement for the BCM53115MKFBG?
The best drop-in replacement must match the BCM53115MKFBG's 400-ball BGA footprint, seven-port Gigabit Ethernet architecture, integrated-PHY arrangement, electrical characteristics, and management requirements. The available cross-reference results identify several Ethernet switching families, but they do not establish exact pin compatibility for this device. Therefore, treat those candidates as design-review starting points and obtain manufacturer confirmation before approving a substitution.
Can a Marvell 88E6190X-series device replace the BCM53115MKFBG?
A Marvell 88E6190X-series device may provide comparable multi-port Gigabit Ethernet switching, but compatibility cannot be assumed from the function alone. A true drop-in replacement would require the same 400-ball package, matching ball assignments, equivalent clock and power interfaces, compatible PHY and magnetics connections, and equivalent management behavior. Review both datasheets and validate the redesign before using the Marvell family in an existing BCM53115MKFBG footprint.
When should I choose the BCM53115MKFBG instead of a discrete-port Ethernet design?
Choose the BCM53115MKFBG when the finished product needs seven integrated Gigabit Ethernet ports and a single switching IC can simplify the PCB or reduce external PHY count. It is particularly relevant to industrial switches, routers, gateways, and access equipment. A discrete-port design may be preferable when port count, protocol features, package availability, thermal constraints, or qualified alternatives do not align with the BCM53115 implementation.
Is the BCM53115MKFBG a cross-brand equivalent to KSZ9893 or RTL838X devices?
The BCM53115MKFBG is not automatically interchangeable with KSZ9893 or RTL838X devices, even though all relate to Ethernet interface silicon. The cross-reference material identifies related families but does not verify identical pin mapping, package construction, integrated-PHY behavior, or register compatibility. Treat them as cross-brand alternatives for architecture evaluation only, not as confirmed drop-in replacements for the 400-ball Broadcom device.
What are the key specifications engineers should know about BCM53115MKFBG?
The key documented specifications are seven Gigabit Ethernet ports, seven integrated PHYs, 65 nm LP CMOS technology, and a square 400-ball BGA package. The product is categorized as an Ethernet interface IC and switching IC. Input-voltage limits, operating-temperature range, clock requirements, management interfaces, timing, and absolute maximum ratings must be taken from the current manufacturer datasheet before the device is approved for a production design.
Where can I buy the BCM53115MKFBG online?
Use the Request a Quote form on this page to request BCM53115MKFBG availability, current lead time, and order handling from XAIPART. The device is represented as active, but stock and delivery schedules can change with demand and manufacturing conditions. Provide the exact MPN, target quantity, and delivery country so the quotation reflects the correct BCM53115MKFBG configuration.
What is the price of the BCM53115MKFBG?
The current BCM53115MKFBG price is not published as a fixed quantity-break table on this product page. Use the Request a Quote form to request pricing for the required quantity, along with stock confirmation and expected lead time. This approach avoids presenting a starting-from figure as a final single-unit or volume price and ensures the quotation is tied to the exact ordering code.
What is the lead time and stock status for the BCM53115MKFBG?
The BCM53115MKFBG is listed as active, but current stock quantity and production lead time are not established by the product records. Use the Request a Quote form on this page to request the latest availability and lead-time commitment. Include your target quantity, schedule, and destination so procurement can confirm whether standard inventory or a scheduled allocation best fits the project.
What design constraints matter most for the BCM53115MKFBG BGA layout?
The BCM53115MKFBG requires a disciplined BGA implementation: short power and ground connections, local decoupling, controlled-impedance routing, clean ball-to-trace transitions, and adequate thermal design. Differential Ethernet traces should follow the manufacturer layout guidance and remain within the specified impedance and length constraints. Production assembly must also verify that the PCB fabricator and assembly house can support the package density and soldering process.

Données de référence d'ingénierie pour BCM53115MKFBG — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the BCM53115MKFBG when the product needs seven copper Gigabit Ethernet ports and a switching function supported by the Broadcom platform. Its integrated PHYs can simplify a multi-port design, but the 400-ball BGA requires mature PCB and assembly capability. BCM53115MKPBG or BCM53115MKFB may be preferable when their manufacturer ordering options better match temperature, qualification, or lifecycle requirements, provided the full suffix comparison confirms compatibility. Consider 88E6190X, KSZ9893, or an RTL838X device only when its management, PHY, clocking, and power interfaces offer a meaningful feature advantage and the PCB is being redesigned; do not treat these as confirmed drop-ins. For any choice, prioritize exact ball mapping, Ethernet-media implementation, thermal performance, firmware support, lifecycle continuity, and production qualification over broad functional similarity.

Comparaison avec les alternatives

Paramètre Ce produit BCM53115MKPBG BCM53115MKFB 88E6190X KSZ9893 RTL838X
Brand Broadcom Broadcom Broadcom Marvell Microchip Technology Realtek
Package 400-ball BGA 400-ball BGA 400-ball BGA 400-ball BGA 400-ball BGA 400-ball BGA
Integrated PHYs 7 integrated Gigabit PHYs 7 integrated Gigabit PHYs 7 integrated Gigabit PHYs Integrated Gigabit PHYs Integrated Gigabit PHYs Integrated Gigabit PHYs
Ethernet Data Rate 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port 1 Gb/s per port

Principaux différenciateurs

  • Seven integrated Gigabit PHYs in one switching device (vs KSZ9893)
  • Compact 65 nm LP CMOS implementation (vs RTL838X)
  • Exact BCM53115 family continuity (vs 88E6190X)
  • Seven-port copper Ethernet consolidation (vs KSZ8041TLI-TR)

Notes de conception

Treat the BCM53115MKFBG as a high-density BGA design. Follow the manufacturer land pattern exactly, provide local supply and ground connections, and route sensitive clock and Ethernet interfaces with continuous reference planes. Verify differential impedance and length rules against the official design guidance rather than relying on generic Ethernet routing conventions. The board should also include a practical assembly stack-up capable of supporting the package's ball pitch and thermal requirements.

Estimate junction temperature from actual 65 nm LP CMOS switching activity, the specified ambient temperature, and copper or heat-spreader performance in the finished enclosure. BGA thermal behavior depends strongly on via arrays, solder-mask and copper-pad design, airflow, and neighboring heat sources. Validate the assembled board with sustained traffic across all seven ports and confirm that the package junction-temperature limit is maintained during worst-case operation.

Keep clock traces short and isolated from noisy switching paths, and use the manufacturer's clocking and decoupling recommendations without increasing trace lengths unnecessarily. Ethernet differential pairs should maintain continuous return paths and controlled impedance through layer transitions. Avoid placing unrelated vias or test points in high-speed regions, and verify edge-rate behavior, crosstalk, and electromagnetic compliance on physical prototypes.

A common mistake is treating a same-family or cross-brand Ethernet IC as interchangeable solely because it is also a multi-port Gigabit switch. Before substituting BCM53115MKPBG, BCM53115MKFB, 88E6190X, KSZ9893, or an RTL838X device, compare the exact ordering suffix, ball map, power rails, clock input, management interface, PHY characteristics, and reference circuitry. An apparent package match does not prove pin-to-pin compatibility.

Informations de conformité

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

RoHS compliance is stated in the JLCPCB product result. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.

Données vérifiées le : 2026-11-15 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

BCM53115MKFBG datasheet BCM53115MKFBG specifications BCM53115MKFBG price Broadcom BCM53115MKFBG BCM53115MKFBG pinout BCM53115MKFBG datasheet pdf BCM53115MKFBG schematic BCM53115MKFBG equivalent BCM53115MKFBG replacement BCM53115MKFBG cross reference BCM53115MKFBG vs 88E6190X BCM53115MKFBG 400-ball BGA BCM53115MKFBG stock 7-port Gigabit Ethernet switch BGA

Composants & termes associés

Broadcom BCM53115MKFBG BCM53115MKPBG BCM53115MKFB Marvell 88E6190X Microchip Technology KSZ9893 Realtek RTL838X Ethernet switch Ethernet interface IC switching IC Gigabit Ethernet integrated PHY 65 nm LP CMOS 400-ball BGA surface mount industrial Ethernet router broadband access network surveillance network test equipment controlled impedance Ethernet magnetics differential pair RoHS
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ