BSC9132NSE7MNMB - QorIQ Qonverge SoC, 1.333GHz, FCBGA-780 | NXP
Référence : BSC9132NSE7MNMB ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268.5 | $2 685,00 |
| 100 | $245 | $24 500,00 |
| 250 | $232 | $58 000,00 |
| 500 | $218.75 | $109 375,00 |
BSC9132NSE7MNMB Présentation
What is a baseband SoC? A baseband System-on-Chip (SoC) is an integrated circuit that combines a CPU subsystem, one or more DSP subsystems, baseband accelerators, security engines, memory controllers and high-speed serial I/O (SerDes) on a single die. In the NXP QorIQ Qonverge family, heterogeneous SCAL cores are paired to allow software-defined radio (SDR) workloads to be partitioned across general-purpose and DSP compute domains while sharing a coherent memory subsystem. Baseband SoCs sit at the heart of wireless infrastructure equipment, ranking higher than standalone microprocessors because they integrate protocol-specific acceleration hardware.
Key features of the BSC9132 include a 45 nm CMOS process node, hardware-accelerated turbo and Viterbi decoding via the MAPLE-B2P engine, integrated security (SEC) for encrypted backhaul, dual GbE and dual PCIe controllers, four-lane SerDes, and a 32-bit DDR3 memory controller with ECC. Two 1.2 GHz cores per cluster (e500 + SC3850) deliver roughly 19.2 GMACs of DSP throughput while sharing IP-class lanes above the DDR3 IP-class portfolio. Operating temperature spans 0C to 105C junction, suiting outdoor small-cell deployments.
The BSC9132 uses NXP's proprietary SoC interconnect with coherent shared L2 caches between e500 and SC3850 clusters, removing the need for explicit DMA buffer copies in LTE baseband pipelines. The MAPLE-B2P accelerator offloads Turbo/Viterbi/FEC decoding, freeing DSP cycles for upper PHY and digital front-end tasks. Compared to NMOS and bipolar baseband ICs of earlier generations, the 45 nm CMOS process reduces power per operation by roughly 40 percent.
Typical applications include LTE small-cell base stations (femto/pico/micro), enterprise VoIP gateways, smart-grid control nodes, military/defense radio platforms, and industrial automation controllers. Pricing shown is as of 2026-10-16. This page synthesizes distributor inventory, drop-in alternatives and design notes not found in the manufacturer datasheet, providing additional engineering context beyond DigiKey/Mouser listings.
Alternatives de remplacement direct pour BSC9132NSE7MNMB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec BSC9132NSE7MNMB (même facteur de forme et même empreinte) — différant par Operating Temperature, Package, Architecture, CPU Cores, DSP Cores.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
BSC9131NSE7MNMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BSC9132NSE7MNNB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BSC9132NXN7MNMB
✅ Remplacement direct✓ En stock
$138.9 / unité
Voir la fiche technique →BSC9132NSN7MNMB
✅ Remplacement direct✓ En stock
$124.5 / unité
Voir la fiche technique →BSC9130NSE7MNMB
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
BSC9132NSE7MNMB Valeurs maximales et caractéristiques électriques
| Product Type | Multicore Baseband SoC (MPU + DSP) |
| Architecture | QorIQ Qonverge BSC |
| CPU Cores | 2x PowerPC e500, 1.2 GHz |
| DSP Cores | 2x StarCore SC3850, 1.2 GHz |
| Max Core Frequency | 1.333 GHz |
| Baseband Accelerator | MAPLE-B2P (Turbo + Viterbi + FEC) |
| Security Engine | SEC (Integrated) |
| Process Technology | 45 nm CMOS |
| Boîtier | 780-pin FCBGA (23x23 mm) |
| Température de fonctionnement | 0C to +105C |
| Type de montage | Surface Mount (BGA) |
| Niveau MSL | 3 (per Partstack listing) |
| Peak Reflow Temperature | 245C (per Partstack listing) |
| Lead-Free / Solder Finish | e1 (per Partstack listing) |
| Largeur du bus de données | 32-bit |
| Statut RoHS | Compliant (per DigiKey) |
Guide de configuration des broches du BSC9132NSE7MNMB 780-pin fcbga (23x23 mm)
Configuration des broches du BSC9132NSE7MNMB (boîtier 780-pin fcbga (23x23 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour BSC9132NSE7MNMB.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
BSC9132NSE7MNMB convient pour 6 applications: LTE Small-Cell Base Station (Femto/Pico/Micro), Enterprise VoIP Gateway and Unified Communications, Smart Grid Control and Substation Automation, Military / Defense Software-Defined Radio, Industrial Automation and Process Control, Wireless Backhaul Aggregation Node.
LTE Small-Cell Base Station (Femto/Pico/Micro)
The BSC9132NSE7MNMB is purpose-built for LTE small-cell base stations where heterogeneous compute matters: two 1.2 GHz PowerPC e500 cores run the L2/L3 control-plane stack and OAM software, while two 1.2 GHz StarCore SC3850 cores plus the MAPLE-B2P accelerator handle Turbo decoding, Viterbi decoding and FEC for the PHY layer. The 1.333 GHz max frequency supports LTE-Advanced carrier aggregation workloads, while the 780-FCBGA footprint is compact enough for outdoor small-cell enclosures. Designers typically pair the SoC with a radio front-end via the integrated 4-lane SerDes, and with an EPC backhaul over the dual GbE. Power dissipation at 1.2 GHz is bounded by the 45 nm CMOS process, suiting passive heatsink designs.
Recommandé
Enterprise VoIP Gateway and Unified Communications
Enterprise VoIP gateways benefit from the BSC9132NSE7MNMB's dual e500 cores for SIP/RTP processing, encryption engine for SRTP/TLS, and DSP cores for echo cancellation, jitter buffering and voice codec transcoding. The SEC engine handles secure SIP/TLS handshake acceleration, while GbE MACs drive 1 Gbps VoIP trunk uplinks. Operating temperature range of 0C to 105C covers climate-controlled telecom rooms. PCB-layer designers use the integrated PCIe for DSP-line expansion cards. The 780-FCBGA allows compact 1U gateway form factors.
Recommandé
Smart Grid Control and Substation Automation
Smart-grid substation controllers running the IEC 61850 protocol stack benefit from the BSC9132NSE7MNMB's deterministic e500 cores for GOOSE message handling and security-engine hardware acceleration for IEC 62351-6 authentication. The dual GbE interfaces align with IEC 61850 station bus architectures (process bus + station bus redundancy), and the integrated SEC engine accelerates MAC authentication for substation communications. Operating junction range 0C to 105C covers climate-controlled substation cabinets. PCB-layer designs typically add a redundant Ethernet PHY and hardware watchdog.
Recommandé
Military / Defense Software-Defined Radio
Defense software-defined radio (SDR) platforms leverage the BSC9132NSE7MNMB's heterogeneous e500+SC3850 architecture: the e500 cores run the SCA (Software Communications Architecture) framework and waveform management, while the SC3850 cores execute DSP-intensive modem waveforms (SINCGARS, HAVE QUICK, Link 16). The integrated SEC engine provides FIPS 140-2-grade cryptographic acceleration for secure tactical communications. Designers pair the SerDes, the radio front-end, and the FPGA-based digital up/down converter. PCB-layer designs typically use extended-temp variants of the BSC9132 family.
Recommandé
Industrial Automation and Process Control
Industrial automation controllers using the BSC9132NSE7MNMB benefit from the e500 cores for deterministic EtherCAT/Profinet master stacks and the SC3850 DSP cores for high-speed motion-control loops and vibration analysis. The integrated PCIe and GbE interfaces drive real-time industrial Ethernet connectivity, while the SEC engine secures OPC-UA communications. Operating junction up to 105C suits enclosed industrial cabinets. PCB-layer designers often add an external watchdog, a real-time clock, and industrial-grade NOR flash for firmware storage.
Recommandé
Wireless Backhaul Aggregation Node
Wireless backhaul aggregation nodes for small-cell deployments use the BSC9132NSE7MNMB as both the Layer-1 baseband processor and the backhaul aggregator. The dual e500 cores handle GTP-U/UDP/IP tunneling and QoS scheduling, while the dual SC3850 cores run Layer-1 PHY processing. The SEC engine accelerates IPSec ESP for encrypted small-cell backhaul, and the dual GbE MACs drive redundant uplinks to the EPC. Operating junction up to 105C suits outdoor street-cabinet enclosures. PCB-layer designers add hardware Watchdog timers and ECC memory for reliability.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour BSC9132NSE7MNMB — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | BSC9131NSE7MNMB | BSC9132NSE7MNNB | BSC9132NXN7MNMB | BSC9132NSN7MNMB | BSC9130NSE7MNMB |
|---|---|---|---|---|---|---|
| Package | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) | 780-FCBGA (23x23 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| DSP Cores | 2x SC3850 @ 1.2 GHz | 1x SC3850 @ 1.2 GHz | 2x SC3850 @ 1.2 GHz | 2x SC3850 @ 1.2 GHz | 2x SC3850 @ 1.2 GHz | 1x SC3850 @ 1.2 GHz (reduced spec) |
| CPU Cores | 2x e500 @ 1.2 GHz | 2x e500 @ 1.2 GHz | 2x e500 @ 1.2 GHz | 2x e500 @ 1.2 GHz | 2x e500 @ 1.2 GHz | 2x e500 @ 1.2 GHz |
| Baseband Accelerator | MAPLE-B2P | MAPLE-B2P | MAPLE-B2P | MAPLE-B2P | MAPLE-B2P | MAPLE-B2P |
| Operating Temperature | 0C to +105C | 0C to +105C | -40C to +105C (extended) | 0C to +105C | 0C to +105C | 0C to +105C |
| Max Core Frequency | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.2 GHz |
| Security Engine | SEC (integrated) | SEC (integrated) | SEC (integrated) | SEC (integrated) | SEC (integrated) | SEC (integrated) |
Principaux différenciateurs
- Dual-cluster DSP+CPU heterogeneous architecture (vs BSC9131NSE7MNMB)
- Commercial-extended 0-105C operating range (vs BSC9132NSE7MNNB)
- Integrated MAPLE-B2P baseband accelerator (vs BSC9130NSE7MNMB)
- Hardware-accelerated SEC security engine (vs Discrete CPU + external crypto IC)
Notes de conception
At full utilization of all four cores (2x e500 + 2x SC3850) at 1.2 GHz on the 45 nm process, the BSC9132NSE7MNMB's junction-to-ambient thermal resistance (theta_JA) requires a heatsink or substantial copper pour on the FCBGA's top side. Estimated: at 12W typical TDP, a 4-layer PCB with a 25x25 mm copper pour on the top side achieves roughly 8 C/W, yielding a 96C junction rise above 25C ambient (within the 105C Tj limit). For closed outdoor enclosures, derate to a 70C max ambient or add a thermal pad with 0.5 mm TIM.
The 780-FCBGA has a 1 mm ball pitch and 23x23 mm body. Use a 6-layer or 8-layer PCB stack-up with microvias-in-pad (VIPPO) for breakout. All DDR3 signals must be length-matched to within +/-25 mil (0.6 mm) per byte lane. Place 100 nF decoupling caps adjacent to every power pin pair, plus 10 uF bulk caps within 5 mm of the SoC. Reference NXP's AN3945 (hardware design guide for QorIQ Qonverge) for the full layout checklist.
Do not exceed the maximum 1.2 GHz operating frequency for sustained workloads; 1.333 GHz is the turbo-grade capability and should only be used for short-duration bursts. Ensure the DDR3 controller is configured for the correct ZQ calibration resistor value (240 ohm +/-1%) and that all SerDes reference clocks are AC-coupled. For e500 boot sequencing, populate the cfg_rcw[0:15] pins with the correct RCW value, otherwise the part will hang in reset. Refer to the BSC9132 datasheet Section 3 for boot configuration details.
The SerDes lanes on the BSC9132NSE7MNMB operate at up to 5 Gbps. Use a 100 ohm differential impedance (T2/RPS) for all SerDes lanes and PCIe lanes. Keep SerDes traces at least 4W (8 mm) away from noisy signals such as clock buffers and switching power supplies. AC-coupling capacitors of 100 nF must be placed near the SoC side of each lane. Failure to follow these guidelines typically yields link-training failures or elevated BER on SerDes links.
Informations de conformité
RoHS compliant per DigiKey listing. Lead-free solder finish (e1 per JESD-609). MSL-3 with 245C peak reflow. Halogen-free status not stated in provided data; consult NXP product page for confirmation. Not AEC-Q100 qualified - this part is not intended for automotive use.
