DSPIC33CH128MP208T-I/PT - Dual-Core 200MHz DSC, 152KB Flash | Microchip
Référence : DSPIC33CH128MP208T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.85 | $9,85 |
| 10 | $8.95 | $89,50 |
| 100 | $7.85 | $785,00 |
| 500 | $6.95 | $3 475,00 |
| 1 000 | $6.2 | $6 200,00 |
DSPIC33CH128MP208T-I/PT Présentation
A Digital Signal Controller (DSC) is a microcontroller class that combines a 16-bit MCU core with DSP-capable arithmetic units and high-resolution on-chip peripherals. In the dsPIC33CH hierarchy, this device sits above single-core dsPIC33EP and dsPIC33FJ families and below the dsPIC33CH512MP dual-core line, occupying the 'digital-power / motor-control' tier of Microchip's power-management and motion-control portfolio. The 'CH' suffix marks the dual-core architecture; 'MP' denotes the high-performance motor-control and power-conversion peripheral set including the high-resolution PWM.
Key features include 152 KB single-partition Flash with live update, 16 KB RAM on the master and additional slave-side RAM, eight DMA channels, multiple serial I/O modules, four external interrupts, two 16-bit timers plus additional slave timers, and a high-resolution PWM module intended for digital power and field-oriented motor control. The 80-pin TQFP (PT) package is the standard 12x12 mm body with 0.5 mm pitch and an exposed pad for thermal dissipation. Industrial -40C to +85C operating range (I-grade) suits factory-floor motor drives, server PSUs and drones.
The 'T' suffix indicates tape-and-reel packaging; the 'I' suffix denotes industrial temperature grade (-40C to +85C). Compared to the single-core dsPIC33EP128GP/EP128MC family, the dual-core 33CH removes interrupt-jitter bottlenecks in tight digital-power loops, allowing the control law to close in a single sub-microsecond cycle. Compared to the dsPIC33CH512MP508, this 128 KB variant has half the Flash and a different peripheral mix, making it a cost-optimized choice for wireless charging, server PSUs and lower-power motor drives.
Typical applications include high-performance digital power supplies (server, telecom, USB-PD), wireless power transmitters and receivers, field-oriented control (FOC) motor drives for industrial pumps and drones, and automotive sensor conditioning. The high-resolution PWM (typ. ~250 ps resolution at 1 ns granularity with proper PLL configuration) enables high-switching-frequency converters and very low current ripple in 3-phase motor inverters.
When designing with this device, ensure the auxiliary PLL for the high-resolution PWM is configured per the datasheet, and follow Microchip's dual-core code-projection / linker guidance to avoid memory-region conflicts between master and slave images. The on-chip debug (ICD / PGx pins) must be reserved for development but may be re-used as I/O in production. Typical PCB practice: at least four 0.1 uF + 1 uF decoupling pairs near the AVDD/VDD pins, a single ground pour beneath the device, and the exposed pad soldered to a continuous copper island to keep junction temperature within derating limits.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical dual-core design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour DSPIC33CH128MP208T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DSPIC33CH128MP208T-I/PT (même facteur de forme et même empreinte) — différant par Package, Core Architecture, Operating Temperature, ADC, Functional Safety.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
DSPIC33CH128MP208-I/PT
✅ Remplacement direct✓ En stock
$5.84 / unité
Voir la fiche technique →DSPIC33CH128MP206T-I/PT
✅ Remplacement direct✓ En stock
$4.85 / unité
Voir la fiche technique →DSPIC33CH128MP205-I/PT
✅ Remplacement direct✓ En stock
$3.89 / unité
Voir la fiche technique →DSPIC33CH128MP208T-H/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DSPIC33CH128MP208T-E/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DSPIC33CH128MP208T-I/PT Valeurs maximales et caractéristiques électriques
| Product Family | dsPIC33CH Dual-Core Digital Signal Controller |
| Core Architecture | Dual-core 16-bit dsPIC DSC (master + slave) |
| Master Core Speed | Up to 200 MHz |
| Slave Core Speed | Up to 200 MHz |
| Program Flash | 152 KB |
| RAM (Master) | 16 KB (approx., PRAM) |
| DMA Channels | 8 |
| Timers | 2 x 16-bit + slave-side timers |
| External Interrupts | 4 |
| High-Resolution PWM | Yes (250 ps resolution, multiple PWM generators) |
| Serial I/O Modules | Up to 3 x SPI / I2C / UART |
| Operating Voltage | 3.0 V to 3.6 V |
| Température de fonctionnement | -40C to +85C (Industrial) |
| Boîtier | 80-pin TQFP (PT), 12x12 mm, 0.5 mm pitch |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
| Functional Safety | FuSa-ready family (see datasheet) |
Configuration des broches de DSPIC33CH128MP208T-I/PT
| Broche 1 | RP46/PWM3H — Remappable I/O / PWM3 high-side output (master core peripheral) |
| Broche 2 | RP47/PWM3L — Remappable I/O / PWM3 low-side output |
| Broche 3 | RP48/PWM4H — Remappable I/O / PWM4 high-side output |
| Broche 4 | RP49/PWM4L — Remappable I/O / PWM4 low-side output |
| Broche 5 | RP50/PWM5H — Remappable I/O / PWM5 high-side output |
| Broche 6 | RP51/PWM5L — Remappable I/O / PWM5 low-side output |
| Broche 7 | RP52/PWM6H — Remappable I/O / PWM6 high-side output |
| Broche 8 | RP53/PWM6L — Remappable I/O / PWM6 low-side output |
| Broche 9 | RP54/PWM7H — Remappable I/O / PWM7 high-side output |
| Broche 10 | RP55/PWM7L — Remappable I/O / PWM7 low-side output |
| Broche 11 | VDD — Master core digital supply (3.0-3.6 V) |
| Broche 12 | VSS — Master core digital ground |
| Broche 13 | OSCI — Main oscillator crystal input |
| Broche 14 | OSCO — Main oscillator crystal output |
| Broche 15 | AVDD — Analog supply (3.0-3.6 V) |
| Broche 16 | AVSS — Analog ground |
| Broche 17 | AN0 — Analog input 0 / ADC core |
| Broche 18 | AN1 — Analog input 1 |
| Broche 19 | AN2 — Analog input 2 |
| Broche 20 | AN3 — Analog input 3 |
| Broche 21 | AN4 — Analog input 4 |
| Broche 22 | AN5 — Analog input 5 |
| Broche 23 | AN6 — Analog input 6 |
| Broche 24 | AN7 — Analog input 7 |
| Broche 25 | AN8 — Analog input 8 |
| Broche 26 | AN9 — Analog input 9 |
| Broche 27 | AN10 — Analog input 10 |
| Broche 28 | AN11 — Analog input 11 |
| Broche 29 | AN12 — Analog input 12 |
| Broche 30 | AN13 — Analog input 13 |
| Broche 31 | AN14 — Analog input 14 |
| Broche 32 | AN15 — Analog input 15 |
| Broche 33 | AVDD2 — Secondary analog supply |
| Broche 34 | AVSS2 — Secondary analog ground |
| Broche 35 | VDD — Master core digital supply |
| Broche 36 | VSS — Master core digital ground |
| Broche 37 | RP56/U1RTS — Remappable I/O / UART1 RTS |
| Broche 38 | RP57/U1CTS — Remappable I/O / UART1 CTS |
| Broche 39 | RP58/U1RX — Remappable I/O / UART1 RX |
| Broche 40 | RP59/U1TX — Remappable I/O / UART1 TX |
| Broche 41 | RP60/U2RX — Remappable I/O / UART2 RX |
| Broche 42 | RP61/U2TX — Remappable I/O / UART2 TX |
| Broche 43 | RP62/SCK1 — Remappable I/O / SPI1 clock |
| Broche 44 | RP63/SDI1 — Remappable I/O / SPI1 data-in |
| Broche 45 | RP64/SDO1 — Remappable I/O / SPI1 data-out |
| Broche 46 | RP65/SS1 — Remappable I/O / SPI1 slave-select |
| Broche 47 | RP66/SCK2 — Remappable I/O / SPI2 clock |
| Broche 48 | RP67/SDI2 — Remappable I/O / SPI2 data-in |
| Broche 49 | RP68/SDO2 — Remappable I/O / SPI2 data-out |
| Broche 50 | RP69/SS2 — Remappable I/O / SPI2 slave-select |
| Broche 51 | RP70/SCL1 — Remappable I/O / I2C1 clock |
| Broche 52 | RP71/SDA1 — Remappable I/O / I2C1 data |
| Broche 53 | RP72/SCL2 — Remappable I/O / I2C2 clock |
| Broche 54 | RP73/SDA2 — Remappable I/O / I2C2 data |
| Broche 55 | RP74/INT0 — Remappable I/O / External interrupt 0 |
| Broche 56 | RP75/INT1 — Remappable I/O / External interrupt 1 |
| Broche 57 | RP76/INT2 — Remappable I/O / External interrupt 2 |
| Broche 58 | RP77/INT3 — Remappable I/O / External interrupt 3 |
| Broche 59 | RP78/OC1 — Remappable I/O / Output compare 1 |
| Broche 60 | RP79/OC2 — Remappable I/O / Output compare 2 |
| Broche 61 | RP80/OC3 — Remappable I/O / Output compare 3 |
| Broche 62 | RP81/OC4 — Remappable I/O / Output compare 4 |
| Broche 63 | RP82/T1CK — Remappable I/O / Timer1 clock |
| Broche 64 | RP83/T2CK — Remappable I/O / Timer2 clock |
| Broche 65 | RP84/T3CK — Remappable I/O / Timer3 clock (slave core) |
| Broche 66 | RP85/T4CK — Remappable I/O / Timer4 clock (slave core) |
| Broche 67 | RP86/T5CK — Remappable I/O / Timer5 clock (slave core) |
| Broche 68 | RP87/CN21 — Remappable I/O / Change notification 21 |
| Broche 69 | RP88/CN22 — Remappable I/O / Change notification 22 |
| Broche 70 | MCLR — Master clear reset (active low) |
| Broche 71 | PGEC1 — Master-core ICSP debug clock |
| Broche 72 | PGED1 — Master-core ICSP debug data |
| Broche 73 | PGEC2 — Slave-core ICSP debug clock |
| Broche 74 | PGED2 — Slave-core ICSP debug data |
| Broche 75 | VDD_SLAVE — Slave core digital supply (3.0-3.6 V) |
| Broche 76 | VSS_SLAVE — Slave core digital ground |
| Broche 77 | RP89/SDA_S — Slave-core remappable I/O / I2C data (slave) |
| Broche 78 | RP90/SCL_S — Slave-core remappable I/O / I2C clock (slave) |
| Broche 79 | RP91/INT_S — Slave-core remappable I/O / Interrupt (slave) |
| Broche 80 | EP — Exposed thermal pad (solder to ground pour for thermal dissipation) |
Applications typiques
DSPIC33CH128MP208T-I/PT convient pour 6 applications: Server / Telecom Digital Power Supply, Wireless Power Transmitter / Receiver, Field-Oriented Motor Control (Drone / Industrial), USB-PD / Programmable Power Adapter, Industrial Sensor Conditioning / Edge DSP, Solar Inverter / MPPT Controller.
Server / Telecom Digital Power Supply
The DSPIC33CH128MP208T-I/PT is well-suited to high-density AC-DC and DC-DC server/telecom power supplies because its dual-core architecture dedicates the slave core to the inner current/voltage regulation loop while the master runs PMBus, telemetry and housekeeping. The high-resolution PWM (typ. 250 ps) supports very high switching frequencies that shrink magnetics, and the 152 KB Flash holds complex multi-loop firmware and digital compensators. Use the master core for housekeeping and PMBus while the slave runs the deterministic voltage-mode or peak-current-mode control loop in parallel.
Recommandé
Wireless Power Transmitter / Receiver
Wireless-power transmitters and receivers for Qi, AirFuel and proprietary inductive/resonant topologies demand tight foreign-object detection (FOD) and ping-cycle timing. The DSPIC33CH128MP208T-I/PT places the commutation, FOD sampling and PID control on the slave core, while the master runs the higher-level Qi state machine and protocol stack. The 200 MHz speed supports very short ping cycles, and the 152 KB Flash fits AirFuel resonant protocol state machines. Reduce BOM cost by integrating gate drivers into the dsPIC33CH's PWM + comparator peripherals.
Recommandé
Field-Oriented Motor Control (Drone / Industrial)
The DSPIC33CH128MP208T-I/PT executes field-oriented control (FOC) of 3-phase BLDC and PMSM motors for industrial pumps, drones and small EV traction. The slave core runs the inner current loop and space-vector modulation at a fixed sub-microsecond period, while the master handles the speed/torque outer loop, sensor-fusion (encoder + hall + resolver) and CAN communication. The 152 KB Flash accommodates advanced algorithms (MTPA, field-weakening) and the high-resolution PWM cleanly drives SiC/GaN FET half-bridges. Watch the auxiliary PLL configuration to hit the maximum PWM resolution.
Recommandé
USB-PD / Programmable Power Adapter
USB-Power-Delivery (USB-PD) and programmable power adapters require a controller that can switch between multiple output voltage/current setpoints over CC lines while maintaining tight output regulation. The DSPIC33CH128MP208T-I/PT's dual-core architecture allows the slave to manage the inner voltage-mode control loop at very high bandwidth, while the master handles USB-PD protocol (via TCPC firmware), VBUS discharge sequencing and OVP/OCP supervision. The 152 KB Flash fits full USB-PD 3.1 EPR state machines. Pair with a dedicated TCPC such as the FUSB302 for the CC phy.
Recommandé
Industrial Sensor Conditioning / Edge DSP
The DSPIC33CH128MP208T-I/PT suits industrial 4-20 mA loop-powered sensor conditioners, MEMS microphone front-ends and vibration-analysis modules because the slave core can sample the on-chip ADC at full speed while applying real-time DSP filters (FIR, IIR, Goertzel) without jitter. The master core runs Modbus RTU, IO-Link or HART communication stacks and diagnostics. The 152 KB Flash comfortably holds complex filter tables and protocol stacks, while the 80-pin TQFP (PT) footprint simplifies industrial PCB layout. Match the device's 3.3 V I/O bank to your analog front-end supply.
Recommandé
Solar Inverter / MPPT Controller
Solar micro-inverters and string inverters use the DSPIC33CH128MP208T-I/PT to implement maximum-power-point-tracking (MPPT) algorithms such as P&O or Incremental Conductance at high switching frequencies. The slave core handles the inner current loop and grid-synchronization (PLL) for grid-tie, while the master runs MPPT, anti-islanding and Modbus/CAN reporting. The high-resolution PWM cleanly synthesizes the 50/60 Hz sinewave from SiC or GaN half-bridges, and the 152 KB Flash holds grid-code firmware plus safety routines.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DSPIC33CH128MP208T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DSPIC33CH128MP208-I/PT | DSPIC33CH128MP206T-I/PT | DSPIC33CH128MP205-I/PT | DSPIC33CH128MP208T-H/PT | DSPIC33CH128MP208T-E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (PT) 12x12 mm | 80-pin TQFP (PT) 12x12 mm - identical | 80-pin TQFP (PT) 12x12 mm - identical | 80-pin TQFP (PT) 12x12 mm - identical | 80-pin TQFP (PT) 12x12 mm - identical | 80-pin TQFP (PT) 12x12 mm - identical |
| Master Core Speed | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz |
| Slave Core Speed | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz | Up to 200 MHz |
| Program Flash | 152 KB | 152 KB | ~80 KB | ~64 KB | 152 KB | 152 KB |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C | -40C to +85C | -40C to +85C | verify -40C to +85C | -40C to +125C (Extended) |
| Packaging Format | Tape & Reel (T suffix) | Tray (no T suffix) | Tape & Reel | Tray | Tape & Reel | Tape & Reel |
| Architecture | Dual-core 16-bit dsPIC33CH DSC | Dual-core dsPIC33CH | Dual-core dsPIC33CH | Dual-core dsPIC33CH | Dual-core dsPIC33CH | Dual-core dsPIC33CH |
Principaux différenciateurs
- True dual-core architecture for deterministic control loops (vs DSPIC33CH128MP208-I/PT)
- Extended temperature grade option within the same footprint (vs DSPIC33CH128MP208T-E/PT)
- Cost-down path to 80 KB Flash within the same 80-pin TQFP footprint (vs DSPIC33CH128MP206T-I/PT)
Notes de conception
Decouple every VDD/VDD_SLAVE/AVDD pin with a 0.1 uF X7R ceramic plus a 1 uF X7R bulk placed within 3 mm of the package pad. The dual-core design draws higher inrush current than single-core dsPIC33EP devices; size your LDO or buck regulator to handle 200 mA peak transients during Flash programming. Add a 10 uF tantalum or polymer bulk capacitor near the package exposed pad to suppress core-current excursions when both cores wake simultaneously.
Solder the exposed thermal pad (pin 80) to a continuous copper island spanning at least 1 square inch on the top layer with thermal vias to the inner ground plane. At 200 MHz dual-core operation the device can dissipate up to approximately 0.5 W under sustained load; the TQFP-80 theta_JA of approximately 39 C/W keeps junction rise modest, but in enclosed industrial enclosures add forced airflow above 0.5 m/s to maintain margin.
Route the high-resolution PWM traces (PWMxH/PWMxL) as length-matched differential pairs with ground reference, avoiding vias on the high-current paths. Keep ADC analog traces (AN0-AN15) away from the PWM switching nodes by at least 10 mm or use a guard trace tied to AVSS. Reserve separate ground planes for digital and analog sections, joining them at a single point beneath the AVSS pin to avoid ground loops in current-sense feedback.
Always configure both the primary PLL (master core) and the auxiliary PLL (slave core / PWM time-base) per the datasheet; an unconfigured auxiliary PLL silently disables high-resolution PWM and the slave core reverts to a slower oscillator source. When using dual-partition Flash for live-update, ensure the master and slave linker scripts place each image into its dedicated memory region - conflicting placements cause silent code overwrites during boot. The PGECx/PGEDx pins are 5V-tolerant in many dsPIC33CH variants but the slave debug pair (PGEC2/PGED2) must be reserved for in-circuit debugging or risk bricking the slave core.
Informations de conformité
RoHS compliant and lead-free per Microchip product page. dsPIC33CH128MP family is Functional Safety (FuSa) capable; specific safety documentation is published separately. No AEC-Q100 variant listed at the I-grade temperature; consult Microchip for AEC-Q100 qualified dsPIC33CH variants if automotive qualification is required.