DSPIC33CH64MP206T-I/PT - Dual-Core 200MHz DSC, 64KB Flash | Microchip
Référence : DSPIC33CH64MP206T-I/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $8.42 | $8,42 |
| 10 | $7.59 | $75,90 |
| 100 | $6.74 | $674,00 |
| 500 | $6.05 | $3 025,00 |
| 1 000 | $5.46 | $5 460,00 |
| 3 000 | $4.91 | $14 730,00 |
DSPIC33CH64MP206T-I/PT Présentation
A Digital Signal Controller (DSC) is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP). It combines deterministic interrupt-driven control peripherals typical of MCUs with high-throughput DSP math capabilities. Within the system hierarchy, a DSC sits between a microcontroller and a dedicated DSP, offering single-cycle MAC, hardware loop buffers, and zero-overhead looping. The dsPIC33CH family specifically adds a heterogeneous dual-core topology (main + auxiliary), enabling real-time partitioning of control loops and communication stacks onto physically isolated cores. The main core runs the application while the auxiliary core handles time-critical sub-tasks such as power-converter feedback loops, motor commutation, or custom peripherals.
Key features include up to 200 MHz operation on the auxiliary core (180 MHz on the main core), DSP engine with single-cycle 16x16 MAC, 88 KB Flash, up to 16 KB SRAM, configurable logic cells, high-speed PWMs, 12-bit ADCs at 3.5 MSPS, and Functional Safety (FuSa) features for ASIL-B/SIL-2 capable systems. The device supports 3.0 V to 3.6 V single-supply operation and integrates CAN-FD, I2C, SPI, UART, and SENT peripherals for automotive and industrial connectivity.
Architecturally, the dual-core topology uses tightly-coupled shared memory and mailbox interrupts to minimize latency between cores. The auxiliary core can access main-core peripherals through a programmable register bus, which simplifies system partitioning. The DSP engine uses dual-operand fetch and a 40-bit accumulator to support high-precision control loops without software overhead, achieving deterministic sub-microsecond response times critical for digital power conversion.
Typical applications include digital switch-mode power supplies (SMPS), high-performance motor control (PMSM, BLDC), wireless charging, LED drivers, server/telecom power converters, automotive sensor fusion, and drones. The device's deterministic dual-core architecture suits safety-critical applications where one core performs diagnostics while the other runs the application.
When designing with the DSPIC33CH64MP206T-I/PT, allocate Flash and RAM budgets across both cores and use MPLAB Code Configurator (MCC) for peripheral setup. The auxiliary core's PRAM allocation must be planned at link time because Flash is partitioned between the two cores. A 4-layer PCB with continuous ground plane is recommended for the 200 MHz signal paths and ADC reference integrity.
This page synthesizes distributor pricing, dual-core partition notes, and FuSa-grade design considerations not always captured in the manufacturer datasheet.
Alternatives de remplacement direct pour DSPIC33CH64MP206T-I/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec DSPIC33CH64MP206T-I/PT (même facteur de forme et même empreinte) — différant par Core Architecture, Package, ADC, Functional Safety, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
DSPIC33CH128MP206T-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.85 / unité
Voir la fiche technique →DSPIC33CH256MP206-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.91 / unité
Voir la fiche technique →DSPIC33CH64MP206-E/PT
✅ Remplacement direct✓ En stock
$5.65 / unité
Voir la fiche technique →DSPIC33CH64MP206T-H/PT
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
DSPIC33CH512MP206-I/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$7.8 / unité
Voir la fiche technique →DSPIC33CH64MP206T-I/PT Valeurs maximales et caractéristiques électriques
| Product Family | dsPIC33CH |
| Core Architecture | 16-bit Dual-Core DSC (main + auxiliary) |
| Main Core Frequency | 180 MHz |
| Auxiliary Core Frequency | 200 MHz |
| Program Flash Memory | 88 KB (88K x 8) |
| Data RAM | 16 KB (shared/main) |
| Tension d'alimentation | 3.0 V to 3.6 V |
| Température de fonctionnement | -40 C to +85 C (Industrial, 'I') |
| Boîtier | 64-pin TQFP (10x10 mm) |
| Terminal Pitch | 0.5 mm |
| ADC | 12-bit, up to 3.5 MSPS |
| DSP Engine | Single-cycle 16x16 MAC, 40-bit accumulator |
| PWM | High-resolution, multiple channels |
| Communication Peripherals | CAN-FD, I2C, SPI, UART, SENT |
| Functional Safety | ASIL-B/SIL-2 capable features |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
Configuration des broches de DSPIC33CH64MP206T-I/PT
| Broche 1 | RP46/RG6 — Remappable GPIO/Analog |
| Broche 2 | RP47/RG7 — Remappable GPIO/Analog |
| Broche 3 | RP48/RG8 — Remappable GPIO/Analog |
| Broche 4 | RP49/RG9 — Remappable GPIO/Analog |
| Broche 5 | VDD — Digital supply voltage |
| Broche 6 | VSS — Digital ground |
| Broche 7 | OSC1/CLKI — Crystal oscillator input or external clock |
| Broche 8 | OSC2/CLKO — Crystal oscillator output |
| Broche 9 | MCLR — Master clear (reset) input |
| Broche 10 | PGED1/AN0 — Programming data/Analog input 0 |
| Broche 11 | PGEC1/AN1 — Programming clock/Analog input 1 |
| Broche 12 | PGED2/AN2 — Programming data/Analog input 2 |
| Broche 13 | PGEC2/AN3 — Programming clock/Analog input 3 |
| Broche 14 | AN4 — Analog input 4 |
| Broche 15 | AN5 — Analog input 5 |
| Broche 16 | AVDD — Analog supply voltage |
| Broche 17 | AVSS — Analog ground |
| Broche 18 | AN6 — Analog input 6 |
| Broche 19 | AN7 — Analog input 7 |
| Broche 20 | AN8 — Analog input 8 |
| Broche 21 | AN9 — Analog input 9 |
| Broche 22 | AN10 — Analog input 10 |
| Broche 23 | AN11 — Analog input 11 |
| Broche 24 | VDD — Digital supply voltage |
| Broche 25 | VSS — Digital ground |
| Broche 26 | RP50/PWM1H — Remappable GPIO/PWM output high |
| Broche 27 | RP51/PWM1L — Remappable GPIO/PWM output low |
| Broche 28 | RP52/PWM2H — Remappable GPIO/PWM output high |
| Broche 29 | RP53/PWM2L — Remappable GPIO/PWM output low |
| Broche 30 | RP54/PWM3H — Remappable GPIO/PWM output high |
| Broche 31 | RP55/PWM3L — Remappable GPIO/PWM output low |
| Broche 32 | VDD — Digital supply voltage |
| Broche 33 | VSS — Digital ground |
| Broche 34 | RP56/CMP1 — Remappable GPIO/Comparator 1 output |
| Broche 35 | RP57/CMP2 — Remappable GPIO/Comparator 2 output |
| Broche 36 | RP58/CMP3 — Remappable GPIO/Comparator 3 output |
| Broche 37 | RP59 — Remappable GPIO |
| Broche 38 | RP60 — Remappable GPIO |
| Broche 39 | RP61 — Remappable GPIO |
| Broche 40 | RP62 — Remappable GPIO |
| Broche 41 | RP63 — Remappable GPIO |
| Broche 42 | RP64 — Remappable GPIO |
| Broche 43 | RP65 — Remappable GPIO |
| Broche 44 | VDD — Digital supply voltage |
| Broche 45 | VSS — Digital ground |
| Broche 46 | RP66/C1RX — Remappable GPIO/CAN-FD 1 receive |
| Broche 47 | RP67/C1TX — Remappable GPIO/CAN-FD 1 transmit |
| Broche 48 | RP68 — Remappable GPIO |
| Broche 49 | RP69 — Remappable GPIO |
| Broche 50 | RP70 — Remappable GPIO |
| Broche 51 | RP71 — Remappable GPIO |
| Broche 52 | SCL1 — I2C clock |
| Broche 53 | SDA1 — I2C data |
| Broche 54 | RP72 — Remappable GPIO |
| Broche 55 | RP73 — Remappable GPIO |
| Broche 56 | RP74 — Remappable GPIO |
| Broche 57 | RP75 — Remappable GPIO |
| Broche 58 | VDD — Digital supply voltage |
| Broche 59 | VSS — Digital ground |
| Broche 60 | RP76 — Remappable GPIO |
| Broche 61 | RP77 — Remappable GPIO |
| Broche 62 | RP78 — Remappable GPIO |
| Broche 63 | RP79 — Remappable GPIO |
| Broche 64 | RP80 — Remappable GPIO |
Applications typiques
DSPIC33CH64MP206T-I/PT convient pour 6 applications: Digital Switch-Mode Power Supply (SMPS), High-Performance Motor Control (PMSM / BLDC), Wireless Charging Transmitter, Server / Telecom Power Converter, Automotive Sensor Fusion, LED Driver and Lighting Control.
Digital Switch-Mode Power Supply (SMPS)
The DSPIC33CH64MP206T-I/PT's dual-core topology excels in digital SMPS designs such as totem-pole PFC, LLC, and full-bridge converters. The 200 MHz auxiliary core can be dedicated to a current-mode control loop running at sub-microsecond intervals while the 180 MHz main core handles housekeeping, communication, and protection. Its 12-bit 3.5 MSPS ADC samples current and voltage sense signals with adequate dynamic range for peak-current-mode topologies. The device's high-resolution PWM peripherals support duty-cycle resolution below 1 ns at 200 MHz, enabling high-bandwidth loop response and reduced input ripple in 1 kW+ server/telecom power supplies.
Recommandé
High-Performance Motor Control (PMSM / BLDC)
For field-oriented control (FOC) of PMSM and BLDC motors, the DSPIC33CH64MP206T-I/PT provides the DSP throughput and ADC speed required for 20 kHz+ current loops with sensorless or encoder-based feedback. The auxiliary core can run the time-critical ADC-triggered current-loop while the main core executes speed/torque control, communications, and state machine logic. The 88 KB Flash is sufficient for typical FOC plus observer firmware, while the 16 KB RAM supports Clarke/Park transform tables and PWM duty registers. The device's 64-pin TQFP offers sufficient I/O for 3-shunt current sensing, Hall/encoder inputs, and CAN-FD communications to a vehicle or robot controller.
Recommandé
Wireless Charging Transmitter
The DSPIC33CH64MP206T-I/PT is well-suited to wireless charging transmitter controllers operating at 100 kHz to 1 MHz resonant frequencies. Its auxiliary core can execute the tight inverter-control algorithm with deterministic timing, while the main core handles Qi protocol stack, foreign-object detection (FOD), and communication with the receiver. The high-resolution PWM peripheral enables phase-shifted full-bridge control with fine dead-time adjustment critical for zero-voltage switching (ZVS). CAN-FD connectivity supports automotive in-cabin wireless charging applications where the transmitter reports status to the body controller.
Recommandé
Server / Telecom Power Converter
In 48 V-to-PoL direct-conversion architectures used in hyperscale data centers and telecom equipment, the DSPIC33CH64MP206T-I/PT's dual-core partitioning enables one core to run the high-frequency LLC or switched-capacitor control loop while the other manages PMBus telemetry, telemetry logging, and fault handling. The 200 MHz auxiliary core provides sufficient headroom for 1-2 MHz digital control loops required in stacked-multi-level converters. ASIL-B/SIL-2 capable FuSa features support redundant fault detection required in mission-critical 5G base-station power systems and AI-server OCP power shelves.
Recommandé
Automotive Sensor Fusion
For automotive sensor modules such as inertial measurement units (IMUs), e-compass modules, or radar pre-processors, the DSPIC33CH64MP206T-I/PT integrates DSP math for sensor fusion and CAN-FD connectivity to the vehicle network. The 88 KB Flash holds calibration data plus a Kalman filter or complementary filter, while the auxiliary core can run an independent watchdog or safety diagnostic. The 'I' industrial temperature grade covers passenger-compartment applications; for under-hood or near-engine use, the DSPIC33CH64MP206T-H/PT variant (-40C to +150C) is recommended in the same 64-TQFP package.
Recommandé
LED Driver and Lighting Control
The DSPIC33CH64MP206T-I/PT drives high-brightness LED arrays in architectural, stage, and horticultural lighting applications. Its high-resolution PWM channels support millions of color-mixing steps with no visible flicker, while the auxiliary core handles DMX-512 or DALI protocol decoding. The 200 MHz DSP engine enables per-channel dimming curves, color-temperature compensation, and predictive thermal management. CAN-FD enables integration into automotive lighting networks for adaptive driving beam (ADB) and matrix-LED headlamp systems requiring sub-millisecond response.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour DSPIC33CH64MP206T-I/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | DSPIC33CH128MP206T-I/PT | DSPIC33CH256MP206-I/PT | DSPIC33CH64MP206-E/PT | DSPIC33CH64MP206T-H/PT | DSPIC33CH512MP206-I/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-TQFP (10x10 mm) | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same | 64-TQFP (10x10 mm) - same |
| Program Flash | 88 KB | 128 KB (+45%) | 256 KB (+191%) | 88 KB (same) | 88 KB (same) | 512 KB (+482%) |
| Data RAM | 16 KB | 16 KB (same) | 32 KB (+100%) | 16 KB (same) | 16 KB (same) | 64 KB (+300%) |
| Main Core Frequency | 180 MHz | 180 MHz (same) | 180 MHz (same) | 180 MHz (same) | 180 MHz (same) | 180 MHz (same) |
| Auxiliary Core Frequency | 200 MHz | 200 MHz (same) | 200 MHz (same) | 200 MHz (same) | 200 MHz (same) | 200 MHz (same) |
| Operating Temperature | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +150C (H) | -40C to +85C (I) |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V (same) | 3.0 V to 3.6 V (same) | 3.0 V to 3.6 V (same) | 3.0 V to 3.6 V (same) | 3.0 V to 3.6 V (same) |
Principaux différenciateurs
- Heterogeneous dual-core architecture vs single-core dsPIC33CK (vs DSPIC33CK64MP105 (single-core))
- More Flash headroom vs same-footprint larger variants (vs DSPIC33CH128MP206T-I/PT)
- Industrial temperature grade at lower cost vs E/H variants (vs DSPIC33CH64MP206T-H/PT)
Notes de conception
Estimated: at a system core frequency of 200 MHz and all peripherals active, the DSPIC33CH64MP206T-I/PT draws approximately 50-70 mA from a 3.3 V supply during dual-core operation, dissipating 0.16-0.23 W. Use a 4-layer PCB with continuous VDD/VSS planes and place 100 nF ceramic decoupling capacitors within 5 mm of every VDD/VSS pin pair. A single 10 uF bulk capacitor per supply region is required; insufficient decoupling can cause brown-out during PWM edge transitions.
The 64-TQFP at 0.5 mm pitch requires PCB design with controlled-impedance traces for the high-speed PWM outputs to FET drivers. Route analog ADC inputs (AN0-AN11) with differential pair geometry if used in current-sense applications, and place the AVSS star-ground connection within 10 mm of the chip's AVSS pin. Use a separate analog ground island connected to VSS at a single point near the MCU to minimize digital switching noise coupling into ADC measurements.
Do not exceed 3.6 V on any VDD or AVDD pin; transients above 4.0 V can permanently damage the device. The MCLR pin requires a 10 kohm pull-up to VDD and a 100 nF cap to ground for noise immunity; omit the cap only if external reset circuitry provides a clean edge. The auxiliary core requires its own ICD programming port; route PGED1/PGEC1 (main core) and PGED2/PGEC2 (auxiliary core) to separate headers to enable independent debugging.
Estimated: at full dual-core activity (200 MHz aux + 180 MHz main) and ambient 25C, the 64-TQFP (10x10 mm) with exposed-pad-area thermal pad can typically dissipate up to 1.0-1.5 W with a moderate copper-pour heat-spreader (1 oz copper, 100 mm^2). For continuous 100% duty at >1.0 W, attach the device thermal pad to a 4 oz copper pour with thermal vias to the inner ground plane. Maximum junction temperature is +150C; design margin should keep Tj below +110C for long-term reliability.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Industrial temperature grade (I) only - NOT AEC-Q100 qualified; for automotive applications requiring AEC-Q100, use a Q-qualified variant. The FuSa (ASIL-B/SIL-2 capable) features are part of the Functional Safety subsystem rather than AEC-Q100 qualification of the part itself.
