Altera

EP1K10TC100-2N - ACEX-1K FPGA, 10K Gates, 576 Cells | Altera

Référence : EP1K10TC100-2N ⚠ Dernier achat

En stock Expédié sous 1 à 3 jours ouvrés

2.5 V Vdss 100-pin TQFP (1.0 mm body, 0.5 mm pitch) Package -2 Speed 12,288 bits Memory

À partir de $8.25 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-09-06

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$14.5	$14,50
10	$12.8	$128,00
100	$10.95	$1 095,00
500	$9.4	$4 700,00
1 000	$8.25	$8 250,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

EP1K10TC100-2N Présentation

The Altera (now Intel) EP1K10TC100-2N is a member of the ACEX-1K family of Field-Programmable Gate Arrays (FPGAs) featuring 10,000 typical gates and 576 logic elements, packaged in a 100-pin Thin Quad Flat Pack (TQFP). Built on a 0.22 um CMOS process and powered from a 2.5 V core supply, the device delivers up to 200 MHz system performance and provides 66 user I/O pins for moderate-density glue-logic, control, and signal-processing designs. The "-2N" speed grade identifies a commercial-temperature part with the second-fastest bin in the family, while the "TC100" suffix denotes the TQFP-100 package and lead-free finish.

A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that combines the volume production economics of a standard IC with the design flexibility of custom logic. ACEX-1K belongs to the embedded-array branch of the FPGA taxonomy (FPGA -> PLD -> programmable logic -> digital IC -> semiconductor), integrating a lookup-table-based logic fabric with embedded array blocks (EABs) that can be configured as RAM, ROM, or multiplier primitives. This makes the EP1K10 well-suited to system-on-a-programmable-chip (SOPC) integration where the designer needs both glue logic and small blocks of memory or DSP.

Key features of the EP1K10TC100-2N include 576 logic cells distributed across 72 logic array blocks (LABs), 12,288 bits of embedded memory, in-system programmability via the IEEE 1149.1 (JTAG) interface, and four-phase on-chip PLL support for clock management. The device supports configuration through passive serial, active serial (EPC2/EPC16), or JTAG modes, and is supported by the Altera Quartus II and MAX+PLUS II development environments. The -2 speed grade provides approximately 0.7 ns gate-delay typical timing at 25 C ambient.

Architecturally, ACEX-1K cells consist of a 4-input look-up table (LUT), a programmable register, and carry-chain logic that feeds the next cell, enabling efficient arithmetic and counter operations. The 100-pin TQFP footprint uses a thin (1.0 mm) body with gull-wing leads on a 0.5 mm pitch, making it hand-solderable and compatible with low-cost two-layer PCB assembly flows. Multi-voltage I/O banks allow 1.8 V, 2.5 V, 3.3 V, and 5 V interfacing without external level shifters.

Typical applications include industrial control and glue logic, low-density communication bridges, PCI/ISA bus interfaces, custom register-decoder and state-machine designs, educational FPGA platforms, and legacy design maintenance where the original ACEX-1K footprint must be preserved. Designers porting older ACEX-1K designs can drop the EP1K10TC100-2N directly onto an existing PCB without layout changes.

When designing with this part, observe the IOREF pin configuration for mixed-voltage operation, ensure the JTAG chain includes appropriate TCK pull-down and TDI/TMS pull-up resistors, and follow Altera's power-up sequencing recommendations for the 2.5 V VCCINT and 3.3 V VCCIO rails. Quartus II 13.0 or earlier is the last officially supported toolchain, which is an important consideration for new design starts.

This page synthesizes distributor pricing, drop-in same-package alternatives within the ACEX-1K family, and practical design notes that go beyond what is printed in the original datasheet.

Alternatives de remplacement direct pour EP1K10TC100-2N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec EP1K10TC100-2N (même facteur de forme et même empreinte) — différant par Process Technology, Package, Operating Temperature, Speed Grade, Family.

EP1K10TC100-1N

Intel

Process Technology: 0.22 µm CMOS SRAM

Package: 100-pin TQFP (14 mm x 14 mm, 1 mm height)

Operating Temperature: 0 °C to 70 °C (commercial)