EP3SE260F1517C4N - Stratix III E FPGA 16.7M Gates 1517-BGA | Intel
Référence : EP3SE260F1517C4N ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9698.58 | $9 698,58 |
| 5 | $9200 | $46 000,00 |
| 10 | $8850 | $88 500,00 |
| 25 | $8400 | $210 000,00 |
| 100 | $7800 | $780 000,00 |
EP3SE260F1517C4N Présentation
What is an FPGA? A Field-Programmable Gate Array is a type of programmable logic device (PLD) - part of the semiconductor hierarchy of programmable logic -> logic IC -> integrated circuit. Unlike fixed-function ASICs, an FPGA contains an array of configurable logic blocks (CLBs/LABs), routing interconnect, embedded memory blocks, DSP blocks, and high-speed transceivers that the engineer can program after manufacturing using a hardware description language (HDL) such as VHDL or Verilog. FPGAs are widely used for prototyping, low-volume production, and applications that demand hardware-level parallelism.
Key features of the EP3SE260F1517C4N include 976 maximum user I/Os, 16,672,768 embedded memory bits, 255,000 logic elements, and up to 10,200 LABs. The 1517-FCBGA package supports high I/O density and signal-integrity routing for multi-gigabit transceivers and external memory interfaces such as DDR3/QDRII+.
The Stratix III E family uses a low-power 65 nm process with programmable power technology, allowing unused logic and routing to be powered down. The device supports up to 12.5 Gbps transceivers and up to 800 MHz on-chip memory, making it suitable for high-bandwidth applications such as wireline communications, ASIC prototyping, and high-end test-and-measurement.
Typical applications include ASIC prototyping and emulation, high-speed serial protocol bridging (PCIe Gen2, Serial RapidIO, SFI-5.1), broadcast video processing, military/aerospace signal processing, and high-performance DSP for radar or medical imaging. Its 976 user I/Os and large memory footprint also fit telecom line-card designs.
When designing with this FPGA, plan power delivery carefully: the device requires multiple voltage rails (0.9 V core, 1.1 V/1.2 V/1.5 V/2.5 V/3.3 V I/O and transceiver supplies) with strict decoupling and sequence requirements. Use the Quartus II design software for HDL synthesis, place-and-route, and timing closure.
This page synthesizes distributor pricing, drop-in same-package alternatives from the Stratix III E family, and practical notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour EP3SE260F1517C4N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP3SE260F1517C4N (même facteur de forme et même empreinte) — différant par Speed Grade, Package, Family, Operating Temperature, Operating Temperature Grade.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP3SE260F1517C4LN
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$1450 / unité
Voir la fiche technique →EP3SE260F1517C4L
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$15100 / unité
Voir la fiche technique →EP3SE260F1517C4
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8400 / unité
Voir la fiche technique →EP3SE260F1517C3N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$9850 / unité
Voir la fiche technique →EP3SE260F1517C3
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$10800 / unité
Voir la fiche technique →EP3SE260F1517C2N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4750 / unité
Voir la fiche technique →EP3SE260F1517C4N Valeurs maximales et caractéristiques électriques
| Series | Stratix® III E |
| Family | Field-Programmable Gate Array (FPGA) |
| Logic Elements | 255,000 |
| Embedded Memory | 16,672,768 bits |
| Logic Array Blocks (LABs) | 10,200 |
| Maximum User I/Os | 976 |
| Boîtier | 1517-BBGA, FCBGA |
| Type de montage | Surface Mount |
| Température de fonctionnement | 0°C to 85°C |
| Core Voltage | 0.9 V |
| Process Node | 65 nm |
| Maximum Transceiver Data Rate | 12.5 Gbps |
Guide de configuration des broches du EP3SE260F1517C4N 1517-bbga, fcbga
Configuration des broches du EP3SE260F1517C4N (boîtier 1517-bbga, fcbga). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour EP3SE260F1517C4N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
EP3SE260F1517C4N convient pour 6 applications: ASIC Prototyping and Emulation, High-Speed Serial Protocol Bridging, Military and Aerospace Signal Processing, Broadcast Video Processing, High-Performance DSP for Radar/Medical Imaging, Industrial Test and Measurement.
ASIC Prototyping and Emulation
The EP3SE260F1517C4N's 255,000 logic elements and 16.7 Mbit embedded memory make it ideal for ASIC prototyping where designers partition their ASIC netlist into multiple FPGAs. With 976 user I/Os the device exposes enough pins to map wide on-chip buses between FPGA partitions. Compared to ASIC tape-out, the 65 nm Stratix III silicon cuts prototyping cost by orders of magnitude while running at usable MHz speeds for software validation. Designers use Quartus II synthesis and the TimeQuest timing analyzer to verify critical paths before committing to mask sets.
Recommandé
High-Speed Serial Protocol Bridging
The Stratix III E transceivers support up to 12.5 Gbps, which lets the EP3SE260F1517C4N bridge PCIe Gen2, Serial RapidIO, SFI-5.1, and 10G/40G Ethernet interfaces in telecom line cards. The 16.7 Mbit embedded memory absorbs packet bursts and aligns data across clock domains. Using the 1517-ball FCBGA with 976 user I/Os, designers route multiple SFP+ cages and external PHY interfaces without I/O starvation. Cyclone III HDL reference designs simplify PMA layer bring-up.
Recommandé
Military and Aerospace Signal Processing
The EP3SE260F1517C4N's 255K logic elements, embedded DSP blocks, and 976 I/Os support radar baseband processing, software-defined radio (SDR), and electronic-warfare signal chains. The 65 nm low-power Stratix III E architecture reduces thermal load in sealed enclosures where convection cooling is impossible. For Mil/Aero applications the commercial 0-85°C grade is acceptable in benign environments; extended-temperature parts (I-suffix variants) are required for avionics. Designers pair the FPGA with high-speed ADCs and DACs to digitize RF spectra.
Recommandé
Broadcast Video Processing
The Stratix III E EP3SE260F1517C4N supports uncompressed 3G-SDI / HD-SDI video pipelines with built-in transceivers and rich on-chip SRAM for line/frame buffers. Its 255K logic elements run real-time de-interlacing, scaling, and chroma keying across multiple video streams, while 976 user I/Os route multiple SDI inputs/outputs, HDMI bridges, and external DDR3 frame stores. Quartus II Video and Image Processing IP cores accelerate time-to-market for broadcast switchers and production switchers.
Recommandé
High-Performance DSP for Radar/Medical Imaging
The EP3SE260F1517C4N's 255K logic elements combined with dedicated DSP blocks perform FFTs, FIR filtering, and beamforming in ultrasound, MRI, and radar imaging front-ends. The 16.7 Mbit embedded memory holds coefficient tables and intermediate FFT bins without external memory round-trips, reducing latency to a few microseconds. With 976 user I/Os the FPGA connects to high-speed ADC/DAC lanes (e.g., 14-bit 250 MSPS converters) for real-time signal capture and processing.
Recommandé
Industrial Test and Measurement
The EP3SE260F1517C4N is used in high-end logic analyzers, protocol testers, and bit-error-rate testers (BERT) where 255K logic elements implement parallel pattern detection, scrambling, and 8b/10b encoding across hundreds of test channels. The 976 user I/Os interface to multi-channel probe heads, while the 12.5 Gbps transceivers drive high-speed serial links under test. Quartus II SignalTap II logic analyzer IP enables on-chip signal capture without external scopes.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP3SE260F1517C4N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP3SE260F1517C4LN | EP3SE260F1517C4L | EP3SE260F1517C4 | EP3SE260F1517C3N | EP3SE260F1517C2N | XC6VLX760-1FF1760 |
|---|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Xilinx |
| Package | 1517-BBGA, FCBGA | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1517-BBGA, FCBGA (same) | 1760-BBGA, FFG (different) |
| Logic Elements | 255,000 | 255,000 | 255,000 | 255,000 | 255,000 | 255,000 | 758,000 logic cells |
| Maximum User I/Os | 976 | 976 | 976 | 976 | 976 | 976 | 1200 |
| Speed Grade | C4 (fastest) | C4 | C4 | C4 | C3 | C2 | -1 |
| Operating Temperature | 0°C to 85°C (commercial) | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
Principaux différenciateurs
- Highest speed grade (C4) in the Stratix III E 260K-LE family (vs EP3SE260F1517C3N)
- Largest I/O count Stratix III E option (1517-ball, 976 user I/Os) (vs EP3SE260F1152C4N)
- Cross-brand migration path with higher logic density (vs Xilinx XC6VLX760-1FF1760)
Notes de conception
The Stratix III E EP3SE260F1517C4N requires multiple supply rails - 0.9 V core (VCC), VCCA (1.1 V PLL analog), and configurable VCCIO for each I/O bank (1.2 V/1.5 V/1.8 V/2.5 V/3.3 V). Decoupling per the Stratix III Device Handbook demands bulk capacitors of 220 uF per rail plus high-frequency 0.1 uF and 1 nF ceramics placed as close as possible to each power pin. Power sequencing requires VCCIO before VCC ramp, and the POR (power-on-reset) circuitry monitors the VCC ramp before releasing configuration logic.
In the 1517-ball FCBGA, the thermal slug is on the underside of the BGA and must be soldered to a thermal via array in the PCB top layer. At 65 nm the device can dissipate up to ~20 W in worst-case utilization; without adequate thermal vias the junction can exceed 125 C. Use at least 4 layers of 1 oz copper dedicated to thermal spreading, with a thermal via array in the BGA center pad that drops to an internal ground plane with stitched vias.
Route the high-speed transceiver channels (12.5 Gbps capable) using stripline geometry with 100 ohm differential impedance. Use the Quartus II board-level signal integrity tool to validate via stubs; back-drilling vias below the AC coupling capacitor is recommended when stubs exceed 100 mil. The 1517-ball FCBGA escape requires microvia (laser-drilled) stack-ups; standard 8-mil/12-mil through-via escape is too coarse for the 1 mm BGA pitch.
Estimated: Quartus II software is required for synthesis, place-and-route, and configuration. Quartus Prime 16.x is the last version with full Stratix III support - do not attempt to compile this device in newer Quartus versions targeting Stratix 10 only. Configuration via JTAG, Active Serial (EPCS), or Fast Passive Parallel must match the selected MSEL pin strapping on the board. Do not confuse EP3SE (Stratix III E) with EP3SL (Stratix III L) - they are different families with different logic densities and memory blocks.
Informations de conformité
EP3SE260F1517C4N is a Stratix III E FPGA in NRND status. Base C4N suffix indicates non-lead-free per legacy Altera convention. Lead-free variants carry LN or L suffix (e.g., EP3SE260F1517C4LN). RoHS/REACH data was not present in the verified distributor pages and is marked unknown. Not AEC-Q100 qualified (FPGA is not a discrete automotive-grade part).
