EP610ILI-12 - 300-Gate Classic EPLD, 12ns, PLCC-28 | Altera
Référence : EP610ILI-12 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.2 | $162,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.4 | $5 700,00 |
| 1 000 | $9.75 | $9 750,00 |
EP610ILI-12 Présentation
Classic EPLDs (Erasable Programmable Logic Devices) are non-volatile programmable logic ICs that use EPROM/EEPROM cells to store the fuse map. They sit below modern CPLDs and FPGAs in the programmable logic hierarchy (PAL/GAL < Classic EPLD < MAX CPLD < FPGAs), and are intended for glue-logic, address decoding, state-machine and bus-arbiter functions where deterministic 12 ns timing and zero-config boot are required.
Key features of the EP610ILI-12 include 300 usable gates, 16 macro cells, 4 dedicated inputs, a programmable security bit for proprietary design protection, 100% generically tested TTL-compatible I/O, and in-system 100% test coverage. The 12 ns speed grade (the "-12" suffix) places it in the mid-tier of the EP610 family, which spans from -10 to -25 speed grades. The "I" indicates the industrial temperature grade and "L" denotes low-power CMOS operation.
Typical applications include TTL glue-logic replacement, address decoding for 8/16-bit microprocessors, state-machine controllers, bus arbitration, and legacy 5 V industrial control designs. Because the EP610 family is mature and now positioned as a legacy part, EP610ILI-12 is frequently specified for maintenance of existing equipment rather than new greenfield designs.
When designing with this device, program it with a Classic EPLD programmer or compatible third-party tool (e.g. Altera MAX+PLUS II legacy flow). Note that Altera's PLCC package follows JEDEC MO-047 outlines and the JEDEC EEPROM cell retention spec applies for the user-programmable fuse map.
Alternatives de remplacement direct pour EP610ILI-12 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec EP610ILI-12 (même facteur de forme et même empreinte) — différant par Package, Supply Voltage (VCC), Family, I/O Pins, Propagation Delay (tPD).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
EP610ILC-10
✅ Remplacement direct✓ En stock
$7.2 / unité
Voir la fiche technique →EP610ILC-25
✅ Remplacement direct✓ En stock
$9.85 / unité
Voir la fiche technique →EP610IDC-15
✅ Remplacement direct✓ En stock
$9.95 / unité
Voir la fiche technique →EP610IDC-10
✅ Remplacement direct✓ En stock
$8.85 / unité
Voir la fiche technique →EP610DM/883B
✅ Remplacement direct✓ En stock
$87.2 / unité
Voir la fiche technique →EP610DM-35
✅ Remplacement direct✓ En stock
$23.4 / unité
Voir la fiche technique →EP610ILI-12 Valeurs maximales et caractéristiques électriques
| Family | Classic EPLD (EP610) |
| Usable Gates | 300 |
| Macro Cells | 16 |
| Speed Grade (tpd) | 12 ns |
| Supply Voltage (Vcc) | 5 V (4.75 V to 5.25 V) |
| Operating Frequency (max) | 83.3 MHz |
| Dedicated Inputs | 4 |
| Technology | CMOS EPROM |
| Température de fonctionnement | -40C to +85C (industrial grade) |
| Boîtier | 28-pin PLCC (J-Lead) |
| Type de montage | Surface Mount |
| Programmable Security Bit | Yes |
| TTL Compatibility | 100 TTL emulation |
Configuration des broches de EP610ILI-12
| Broche 1 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 2 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 3 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 4 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 5 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 6 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 7 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 8 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 9 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 10 | GND — Ground |
| Broche 11 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 12 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 13 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 14 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 15 | IN — Dedicated input |
| Broche 16 | IN — Dedicated input |
| Broche 17 | IN — Dedicated input |
| Broche 18 | IN — Dedicated input |
| Broche 19 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 20 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 21 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 22 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 23 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 24 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 25 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 26 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 27 | I/O — Bidirectional I/O pin (macro cell) |
| Broche 28 | VCC — +5V supply |
Applications typiques
EP610ILI-12 convient pour 6 applications: TTL Glue-Logic Replacement, Address Decoding for 8/16-bit Microprocessors, State Machine Controllers, Bus Arbitration and Control, Legacy Industrial Control Replacement, Peripheral Chip-Select Generation.
TTL Glue-Logic Replacement
The EP610ILI-12 integrates multiple 7400-series TTL gates into a single 300-gate EPLD, reducing PCB area, BOM count and power consumption. Its 12 ns propagation delay matches standard 74LS logic timing, making it a drop-in upgrade for designs that have accumulated discrete glue logic. The 5 V TTL-compatible I/O removes the need for level shifting in legacy systems. Programmable security bit protects proprietary decoding patterns from reverse engineering.
Recommandé
Address Decoding for 8/16-bit Microprocessors
EP610ILI-12's 16 macro cells and 4 dedicated inputs make it well-suited for address decoding in 8-bit (8085, Z80) and 16-bit (8086, 68000) microprocessor systems. Each macro cell can implement a product term that decodes a unique address or chip-select pattern, with 12 ns tpd easily meeting wait-state-less memory and peripheral access. The 5 V Vcc is compatible with legacy CPU buses without level translation.
Recommandé
State Machine Controllers
With 16 macro cells and registered output capability, EP610ILI-12 can implement state machines with up to 16 states - covering most industrial sequencing, traffic-light, vending-machine and protocol-handshake designs. The 12 ns tpd enables deterministic state transitions up to ~83 MHz, and the programmable security bit protects proprietary FSM logic. The EPROM cell retains state definitions across power cycles without external configuration memory.
Recommandé
Bus Arbitration and Control
EP610ILI-12 supports multi-master bus arbitration in ISA, VME and proprietary backplane systems using its combinational macro cells for priority encoding and registered outputs for grant-latch logic. The 12 ns propagation delay is well within typical bus-access timing budgets. Industrial temperature grade (-40C to +85C) allows deployment in factory-floor and outdoor enclosures.
Recommandé
Legacy Industrial Control Replacement
EP610ILI-12 is widely used to replace failed or obsolete PAL/GAL devices in 1980s-1990s industrial control equipment where board rework is not feasible. The PLCC-28 socketed package allows field replacement without desoldering. The industrial temperature range and CMOS low-power operation suit 24/7 factory environments. Long-term availability from the legacy distribution channel supports maintenance of installed base through 2030+.
Recommandé
Peripheral Chip-Select Generation
The EP610ILI-12 generates clean, glitch-free chip-select signals for parallel peripherals (UARTs, FIFOs, SRAM, Flash) without external latch-and-decode trees. With 4 dedicated inputs and 16 macro cells, designers can implement up to 8 decoded chip selects with full address-strobe qualification. The 5 V TTL outputs drive peripheral enable pins directly, eliminating series resistors in most cases.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour EP610ILI-12 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | EP610ILC-10 | EP610ILC-25 | EP610IDC-15 | EP610IDC-10 | EP610DM/883B |
|---|---|---|---|---|---|---|
| Package | PLCC-28 | PLCC-28 - same | PLCC-28 - same | PLCC-28 - same | PLCC-28 - same | PLCC-28 - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macro Cells | 16 | 16 | 16 | 16 | 16 | 16 |
| Usable Gates | 300 | 300 | 300 | 300 | 300 | 300 |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Industrial | Industrial | Military (-55C to +125C) |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Pinout Style | PLCC J-lead | PLCC J-lead | PLCC J-lead | DIP-pinout compatible | DIP-pinout compatible | PLCC J-lead |
Principaux différenciateurs
- Industrial temperature grade with low-power CMOS (vs EP610ILC-12)
- 12 ns speed grade - balanced performance/cost (vs EP610ILC-25)
- Drop-in PLCC-28 socket compatibility (vs EP610PC-12 (PDIP))
Notes de conception
When replacing a PAL/GAL with EP610ILI-12, do not assume the JEDEC fuse map is portable - the Classic EPLD architecture uses a different macro cell structure than PAL/GAL. You must recompile the design in MAX+PLUS II AHDL or schematic entry. Also note that the EP610 requires a 12.5 V Vpp during programming - this is supplied by the programmer, not the application board, so no on-board programming-voltage regulator is needed.
The EP610ILI-12 in PLCC-28 has a theta_JA of approximately 50 C/W. At typical CMOS standby currents under 5 mA and Icc active around 100 mA, self-heating is negligible (<0.5 W). No heatsink is required for normal operation. Forced-air cooling is unnecessary even in sealed industrial enclosures, but ensure ambient temperature stays within the -40C to +85C industrial limit.
Place a 0.1 uF decoupling capacitor as close as possible to the EP610ILI-12 Vcc pin (pin 28), with a 10 uF bulk tantalum or ceramic on the same 5 V rail. For socketed designs, use a quality PLCC-28 socket with retention clips to survive field replacement. Keep programming pin (if exposed in-circuit) traces short and away from switching signals to avoid accidental erase.
Informations de conformité
Compliance data not in verified sources. Altera Classic EPLD family predates formal RoHS/REACH documentation. EP610ILI-12 is NRND - consult Intel/Altera legacy product group for current compliance certification.
