EP610ILI-12 - 300-Gate Classic EPLD, 12ns, PLCC-28 | Altera
부품 번호: EP610ILI-12 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.2 | $162.00 |
| 100 | $13.85 | $1,385.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.75 | $9,750.00 |
EP610ILI-12 개요
Classic EPLDs (Erasable Programmable Logic Devices) are non-volatile programmable logic ICs that use EPROM/EEPROM cells to store the fuse map. They sit below modern CPLDs and FPGAs in the programmable logic hierarchy (PAL/GAL < Classic EPLD < MAX CPLD < FPGAs), and are intended for glue-logic, address decoding, state-machine and bus-arbiter functions where deterministic 12 ns timing and zero-config boot are required.
Key features of the EP610ILI-12 include 300 usable gates, 16 macro cells, 4 dedicated inputs, a programmable security bit for proprietary design protection, 100% generically tested TTL-compatible I/O, and in-system 100% test coverage. The 12 ns speed grade (the "-12" suffix) places it in the mid-tier of the EP610 family, which spans from -10 to -25 speed grades. The "I" indicates the industrial temperature grade and "L" denotes low-power CMOS operation.
Typical applications include TTL glue-logic replacement, address decoding for 8/16-bit microprocessors, state-machine controllers, bus arbitration, and legacy 5 V industrial control designs. Because the EP610 family is mature and now positioned as a legacy part, EP610ILI-12 is frequently specified for maintenance of existing equipment rather than new greenfield designs.
When designing with this device, program it with a Classic EPLD programmer or compatible third-party tool (e.g. Altera MAX+PLUS II legacy flow). Note that Altera's PLCC package follows JEDEC MO-047 outlines and the JEDEC EEPROM cell retention spec applies for the user-programmable fuse map.
드롭인 대체품: EP610ILI-12 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: EP610ILI-12 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Supply Voltage (VCC), Family, I/O Pins, Propagation Delay (tPD).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
EP610ILC-10
✅ 드롭인✓ 재고 있음
$7.2 / 개
데이터시트 보기 →EP610ILC-25
✅ 드롭인✓ 재고 있음
$9.85 / 개
데이터시트 보기 →EP610IDC-15
✅ 드롭인✓ 재고 있음
$9.95 / 개
데이터시트 보기 →EP610IDC-10
✅ 드롭인✓ 재고 있음
$8.85 / 개
데이터시트 보기 →EP610DM/883B
✅ 드롭인✓ 재고 있음
$87.2 / 개
데이터시트 보기 →EP610DM-35
✅ 드롭인✓ 재고 있음
$23.4 / 개
데이터시트 보기 →EP610ILI-12 최대 정격 & 전기적 특성
| Family | Classic EPLD (EP610) |
| Usable Gates | 300 |
| Macro Cells | 16 |
| Speed Grade (tpd) | 12 ns |
| Supply Voltage (Vcc) | 5 V (4.75 V to 5.25 V) |
| Operating Frequency (max) | 83.3 MHz |
| Dedicated Inputs | 4 |
| Technology | CMOS EPROM |
| 동작 온도 | -40C to +85C (industrial grade) |
| 패키지 | 28-pin PLCC (J-Lead) |
| 실장 유형 | Surface Mount |
| Programmable Security Bit | Yes |
| TTL Compatibility | 100 TTL emulation |
EP610ILI-12 핀 구성
| 핀 1 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 2 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 3 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 4 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 5 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 6 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 7 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 8 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 9 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 10 | GND — Ground |
| 핀 11 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 12 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 13 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 14 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 15 | IN — Dedicated input |
| 핀 16 | IN — Dedicated input |
| 핀 17 | IN — Dedicated input |
| 핀 18 | IN — Dedicated input |
| 핀 19 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 20 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 21 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 22 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 23 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 24 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 25 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 26 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 27 | I/O — Bidirectional I/O pin (macro cell) |
| 핀 28 | VCC — +5V supply |
일반적인 애플리케이션
EP610ILI-12 적합 용도: 6 애플리케이션s: TTL Glue-Logic Replacement, Address Decoding for 8/16-bit Microprocessors, State Machine Controllers, Bus Arbitration and Control, Legacy Industrial Control Replacement, Peripheral Chip-Select Generation.
TTL Glue-Logic Replacement
The EP610ILI-12 integrates multiple 7400-series TTL gates into a single 300-gate EPLD, reducing PCB area, BOM count and power consumption. Its 12 ns propagation delay matches standard 74LS logic timing, making it a drop-in upgrade for designs that have accumulated discrete glue logic. The 5 V TTL-compatible I/O removes the need for level shifting in legacy systems. Programmable security bit protects proprietary decoding patterns from reverse engineering.
추천
Address Decoding for 8/16-bit Microprocessors
EP610ILI-12's 16 macro cells and 4 dedicated inputs make it well-suited for address decoding in 8-bit (8085, Z80) and 16-bit (8086, 68000) microprocessor systems. Each macro cell can implement a product term that decodes a unique address or chip-select pattern, with 12 ns tpd easily meeting wait-state-less memory and peripheral access. The 5 V Vcc is compatible with legacy CPU buses without level translation.
추천
State Machine Controllers
With 16 macro cells and registered output capability, EP610ILI-12 can implement state machines with up to 16 states - covering most industrial sequencing, traffic-light, vending-machine and protocol-handshake designs. The 12 ns tpd enables deterministic state transitions up to ~83 MHz, and the programmable security bit protects proprietary FSM logic. The EPROM cell retains state definitions across power cycles without external configuration memory.
추천
Bus Arbitration and Control
EP610ILI-12 supports multi-master bus arbitration in ISA, VME and proprietary backplane systems using its combinational macro cells for priority encoding and registered outputs for grant-latch logic. The 12 ns propagation delay is well within typical bus-access timing budgets. Industrial temperature grade (-40C to +85C) allows deployment in factory-floor and outdoor enclosures.
추천
Legacy Industrial Control Replacement
EP610ILI-12 is widely used to replace failed or obsolete PAL/GAL devices in 1980s-1990s industrial control equipment where board rework is not feasible. The PLCC-28 socketed package allows field replacement without desoldering. The industrial temperature range and CMOS low-power operation suit 24/7 factory environments. Long-term availability from the legacy distribution channel supports maintenance of installed base through 2030+.
추천
Peripheral Chip-Select Generation
The EP610ILI-12 generates clean, glitch-free chip-select signals for parallel peripherals (UARTs, FIFOs, SRAM, Flash) without external latch-and-decode trees. With 4 dedicated inputs and 16 macro cells, designers can implement up to 8 decoded chip selects with full address-strobe qualification. The 5 V TTL outputs drive peripheral enable pins directly, eliminating series resistors in most cases.
추천
추천 제품 요약
엔지니어링 참조 데이터: EP610ILI-12 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | EP610ILC-10 | EP610ILC-25 | EP610IDC-15 | EP610IDC-10 | EP610DM/883B |
|---|---|---|---|---|---|---|
| Package | PLCC-28 | PLCC-28 - same | PLCC-28 - same | PLCC-28 - same | PLCC-28 - same | PLCC-28 - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Macro Cells | 16 | 16 | 16 | 16 | 16 | 16 |
| Usable Gates | 300 | 300 | 300 | 300 | 300 | 300 |
| Temperature Grade | Industrial (-40C to +85C) | Commercial (0C to +70C) | Commercial (0C to +70C) | Industrial | Industrial | Military (-55C to +125C) |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Pinout Style | PLCC J-lead | PLCC J-lead | PLCC J-lead | DIP-pinout compatible | DIP-pinout compatible | PLCC J-lead |
주요 차별점
- Industrial temperature grade with low-power CMOS (vs EP610ILC-12)
- 12 ns speed grade - balanced performance/cost (vs EP610ILC-25)
- Drop-in PLCC-28 socket compatibility (vs EP610PC-12 (PDIP))
설계 노트
When replacing a PAL/GAL with EP610ILI-12, do not assume the JEDEC fuse map is portable - the Classic EPLD architecture uses a different macro cell structure than PAL/GAL. You must recompile the design in MAX+PLUS II AHDL or schematic entry. Also note that the EP610 requires a 12.5 V Vpp during programming - this is supplied by the programmer, not the application board, so no on-board programming-voltage regulator is needed.
The EP610ILI-12 in PLCC-28 has a theta_JA of approximately 50 C/W. At typical CMOS standby currents under 5 mA and Icc active around 100 mA, self-heating is negligible (<0.5 W). No heatsink is required for normal operation. Forced-air cooling is unnecessary even in sealed industrial enclosures, but ensure ambient temperature stays within the -40C to +85C industrial limit.
Place a 0.1 uF decoupling capacitor as close as possible to the EP610ILI-12 Vcc pin (pin 28), with a 10 uF bulk tantalum or ceramic on the same 5 V rail. For socketed designs, use a quality PLCC-28 socket with retention clips to survive field replacement. Keep programming pin (if exposed in-circuit) traces short and away from switching signals to avoid accidental erase.
규정 준수 정보
Compliance data not in verified sources. Altera Classic EPLD family predates formal RoHS/REACH documentation. EP610ILI-12 is NRND - consult Intel/Altera legacy product group for current compliance certification.
