KCP556SD8-32 - 32GB DDR5 5600 SODIMM 262-pin | Kingston
Référence : KCP556SD8-32 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $99.95 | $99,95 |
| 10 | $89.5 | $895,00 |
| 100 | $78.2 | $7 820,00 |
| 500 | $69.8 | $34 900,00 |
| 1 000 | $62.5 | $62 500,00 |
KCP556SD8-32 Présentation
A SO-DIMM (Small Outline Dual In-line Memory Module) is a compact, JEDEC-standardized memory module form factor optimized for space-constrained systems such as laptops, mini-PCs, small-form-factor desktops, and All-In-One computers. DDR5 SDRAM represents the fifth generation of double-data-rate synchronous DRAM, delivering higher per-pin bandwidth, lower operating voltage (1.1 V vs 1.2 V for DDR4), and on-die ECC support compared with its predecessors. Within the broader memory hierarchy, SO-DIMM DDR5 modules sit between soldered LPDDR and full-size DIMM DDR5 modules, offering upgradability and standardized compatibility across consumer and commercial platforms.
Key features of the KCP556SD8-32 include a 5600 MT/s transfer rate (PC5-44800), 32 GB single-module capacity, Non-ECC unbuffered signaling, CL46 CAS Latency timing, 2Rx8 rank and organization, and a 1.1 V typical operating voltage compliant with JEDEC DDR5 standards. The 262-pin edge connector follows the JEDEC SODIMM standard for DDR5 modules.
The KCP556SD8-32 is validated through Kingston's system-specific compatibility program for each major laptop brand, ensuring plug-and-play operation without BIOS adjustments. Its unbuffered, Non-ECC configuration makes it appropriate for mainstream consumer and commercial notebooks rather than server or workstation platforms that require ECC or registered DIMMs.
Typical applications include laptop memory upgrades, mini-PC and small-form-factor desktop upgrades, All-In-One system expansion, workstation notebooks, and content-creation portable systems that benefit from higher DDR5 bandwidth for video editing and large dataset processing.
When designing or upgrading with this module, confirm the target system supports DDR5 SO-DIMM at 5600 MT/s. Systems that only support lower DDR5 speeds will clock the module down to their maximum supported rate, preserving stability but reducing peak bandwidth. Mixed-module installations are supported only if both modules share identical ranks, timings, and voltage.
This page synthesizes distributor pricing, validated Kingston part specifications, and practical upgrade guidance not consolidated on the manufacturer datasheet.
Alternatives de remplacement direct pour KCP556SD8-32 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
KCP556SS6-32
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KCP556SD8-32-B
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
CT32G56C46S5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
M425R4GA3BB0-CWM
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
SFYRS/32GBCSZ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
KCP556SD8-32 Valeurs maximales et caractéristiques électriques
| Capacity | 32 GB |
| Module Count | 1 x 32 GB |
| Type de mémoire | DDR5 SDRAM |
| Speed Grade | PC5-44800 |
| Transfer Rate | 5600 MT/s |
| Form Factor | SO-DIMM 262-pin |
| CAS Latency (CL) | CL46 |
| Rank / Organization | 2Rx8 (Dual Rank) |
| DRAM Density | 16 Gbit |
| ECC Support | Non-ECC |
| Buffering | Unbuffered (UDIMM) |
| Operating Voltage | 1.1 V |
| Compatible Machine Type | Laptop / Notebook / AIO |
| JEDEC Standard | DDR5 SO-DIMM |
| RoHS Compliance | Compliant |
Guide de configuration des broches du KCP556SD8-32 standard
Configuration des broches du KCP556SD8-32 (boîtier standard). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour KCP556SD8-32.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
KCP556SD8-32 convient pour 6 applications: Laptop Memory Upgrade, All-In-One (AIO) Desktop Memory Expansion, Mini-PC and Small-Form-Factor Desktop Upgrade, Mobile Workstation Content Creation, Edge Compute and IoT Gateway, Gaming Notebook Memory Upgrade.
Laptop Memory Upgrade
The KCP556SD8-32 is a single 32 GB DDR5-5600 SO-DIMM designed for direct insertion into a laptop's secondary SO-DIMM slot. With 5600 MT/s transfer rate (PC5-44800) and 1.1 V JEDEC-standard voltage, it lifts total system memory from typical 16 GB factory configurations to 48 GB or 64 GB. The Non-ECC unbuffered signaling matches mainstream consumer notebook platforms, and Kingston's per-OEM validation program reduces the risk of POST failures after installation.
Recommandé
All-In-One (AIO) Desktop Memory Expansion
All-In-One systems typically ship with one or two SO-DIMM slots and ship with 8-16 GB to keep chassis cost low. The KCP556SD8-32 provides a single 32 GB stick that fits the same 262-pin JEDEC SO-DIMM connector, doubling or quadrupling installed memory. 5600 MT/s bandwidth benefits AIO systems running photo and video workflows, and the 1.1 V DDR5 standard reduces system thermal load versus older DDR4 SO-DIMMs at 1.2 V.
Recommandé
Mini-PC and Small-Form-Factor Desktop Upgrade
Mini-PC and SFF desktops (e.g., Intel NUC, Lenovo ThinkCentre Tiny, HP ProDesk Mini) almost universally use SO-DIMM rather than full-size DIMM. The KCP556SD8-32 drops into these compact systems with no BIOS changes required, adding 32 GB in a single slot. 5600 MT/s DDR5 bandwidth supports multi-monitor office workloads, light content creation, and virtualization labs where multiple VMs run concurrently on a single host.
Recommandé
Mobile Workstation Content Creation
Mobile workstations with DDR5 SO-DIMM slots (e.g., Dell Precision, Lenovo ThinkPad P-series, HP ZBook) can use the KCP556SD8-32 to reach 64 GB or 96 GB total memory when paired with a second 32 GB module. 5600 MT/s bandwidth accelerates 4K/8K video timelines, large Photoshop composites, and RAW photo libraries. Non-ECC unbuffered signaling is appropriate for creative workloads; ECC-certified modules are required only for certified Xeon-based mobile workstations.
Recommandé
Edge Compute and IoT Gateway
Industrial edge gateways and IoT appliances increasingly use DDR5 SO-DIMM sockets to support on-device inference, data buffering, and lightweight analytics. The KCP556SD8-32 provides 32 GB capacity in the same JEDEC 262-pin SO-DIMM outline, enabling inference of mid-sized AI models directly on the gateway. The 1.1 V DDR5 voltage helps stay within industrial thermal envelopes, and Kingston's wide operating-temperature validation program supports harsher deployments.
Recommandé
Gaming Notebook Memory Upgrade
High-end gaming notebooks with DDR5 SO-DIMM slots benefit from the KCP556SD8-32 by lifting system memory to 32 GB or 64 GB without changing the factory CPU/GPU balance. 5600 MT/s bandwidth reduces game asset streaming stalls and improves 1% low frame rates in CPU-bound titles. The Non-ECC unbuffered configuration is standard for gaming-class GPUs and CPUs, and the 2Rx8 dual-rank organization can yield slightly higher effective throughput than single-rank modules.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour KCP556SD8-32 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | KCP556SS6-32 | KCP556SD8-32-B | CT32G56C46S5 | M425R4GA3BB0-CWM | SFYRS/32GBCSZ |
|---|---|---|---|---|---|---|
| Brand | Kingston | Kingston (same brand) | Kingston (same brand) | Crucial (Micron) | Samsung | Synology |
| Package | SO-DIMM 262-pin | SO-DIMM 262-pin - same | SO-DIMM 262-pin - same | SO-DIMM 262-pin - same | SO-DIMM 262-pin - same | SO-DIMM 262-pin - same |
| Capacity | 32 GB | 32 GB | 32 GB | 32 GB | 32 GB | 32 GB |
| Speed Grade | DDR5-5600 (PC5-44800) | DDR5-5600 | DDR5-5600 | DDR5-5600 | DDR5-5600 | DDR5-5600 |
| Rank / Organization | 2Rx8 (Dual Rank) | 1Rx16 (Single Rank) | 2Rx8 | 2Rx8 | 2Rx8 | 2Rx8 |
| CAS Latency | CL46 | CL46 | CL46 | CL46 | CL46 | CL46 |
| ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC |
| Operating Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
| Form Factor | SO-DIMM 262-pin | SO-DIMM 262-pin | SO-DIMM 262-pin | SO-DIMM 262-pin | SO-DIMM 262-pin | SO-DIMM 262-pin |
Principaux différenciateurs
- Kingston OEM-validated compatibility (vs CT32G56C46S5 (Crucial))
- Dual-rank 2Rx8 organization (vs KCP556SS6-32)
- 16 Gbit DRAM density foundation (vs M425R4GA3BB0-CWM)
Notes de conception
Do not mix the KCP556SD8-32 (2Rx8 dual-rank) with a 1Rx16 single-rank module in the same laptop; Intel and AMD mobile platforms generally require matched rank configuration per channel. Mixing ranks can prevent POST or force the system to run in single-channel flex mode at reduced bandwidth.
The KCP556SD8-32 operates at the JEDEC DDR5 standard of 1.1 V. Estimated: at 32 GB capacity and 5600 MT/s, a fully populated slot draws approximately 3-4 W under burst load. Laptop VRMs should be verified to deliver at least 5 W per SO-DIMM slot headroom to ensure stable operation under sustained write workloads.
Insert the SO-DIMM at a 30-degree angle into the 262-pin JEDEC socket, then press flat until the side latches engage. Confirm full contact on both ends before applying power; partial insertion is the most common cause of POST failures with DDR5 SO-DIMMs and is not visible without removing the module.
Informations de conformité
RoHS and REACH compliance per Kingston product page. AEC-Q100 not applicable for SO-DIMM memory modules. Lead-free JEDEC DDR5 SO-DIMM construction.
