Texas Instruments

LM2902KAVQDR - 30V Quad Op Amp with 2kV ESD | Texas Instruments

Référence : LM2902KAVQDR ✓ Actif
30 V Vdss 1.4 mA Id 14-pin SOIC (D) Package
MOQ : 1 |

LM2902KAVQDR Présentation

The Texas Instruments LM2902KAVQDR is a quad general-purpose operational amplifier rated for 30 V operation, featuring 1.2 MHz gain-bandwidth product, 2 mV input offset voltage, and improved 2 kV ESD protection. The device is packaged in a 14-pin SOIC package and operates from -40 °C to +125 °C. It provides four amplifiers in one package for signal conditioning, buffering, filtering, and general analog signal-chain applications.

An operational amplifier is an active analog semiconductor that uses high open-loop gain to amplify voltage differences between its inverting and non-inverting inputs. The LM2902 belongs to the general-purpose operational-amplifier hierarchy, which is widely used in industrial controls, sensor interfaces, audio equipment, power-supply monitoring, and embedded analog systems. Its four independent channels make it useful when a board needs several similar low-speed analog functions without using four separate packages.

The key features of the LM2902KAVQDR include a wide 3 V to 32 V supply range, a 1.2 MHz typical gain-bandwidth product, 0.5 V/µs slew rate, and approximately 1.4 mA supply current per amplifier. The KAV version includes improved ESD protection rated at 2 kV, making it suitable for applications where exposed connector pins or external wiring can introduce electrostatic discharge. The 2 mV input offset voltage is suitable for general-purpose signal conditioning rather than precision instrumentation applications.

The LM2902KAVQDR is based on a bipolar operational-amplifier architecture. Its four channels are designed for operation from a single supply or from split dual supplies. With a 30 V maximum supply rating, the amplifier can process signals in industrial and automotive-related circuits when the system transient and ESD requirements are controlled appropriately. The 1.2 MHz bandwidth is appropriate for low-frequency audio, control, sensor, and feedback applications rather than high-speed signal processing.

Typical applications include sensor signal conditioning, transducer amplification, active filtering, voltage comparison, audio preamplification, current-sense feedback, and general-purpose power-supply control. Because the device is a four-channel amplifier, board designers can use one SOIC-14 package for multiple analog functions while reducing component count and simplifying PCB layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be handled according to the manufacturer’s recommended configuration.

This page combines the LM2902KAVQDR operating details, package information, practical design guidance, and verified drop-in alternatives to support component selection and board-level implementation.

Alternatives de remplacement direct pour LM2902KAVQDR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM2902KAVQDR (même facteur de forme et même empreinte) — différant par Product Type, Maximum Supply Voltage, Package, Supply Configuration, Operating Temperature Range.

Texas Instruments
Product Type: Quad operational amplifier
Maximum Supply Voltage: 26 V
Package: 14-SOIC
Comparer avec LM2902KAVQDR →
Texas Instruments
Product Type: Quad operational amplifier
Maximum Supply Voltage: 26 V
Package: 14-SOIC
Comparer avec LM2902KAVQDR →
Texas Instruments
Product Type: General-purpose operational amplifier
Maximum Supply Voltage: 26 V
Supply Configuration: Single or dual supply
Comparer avec LM2902KAVQDR →

LM2902DR

✅ Remplacement direct
Texas Instruments
📦 SOIC-14 (D)
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

Contactez-nous pour le prix

Voir la fiche technique →

LM2902KDR

✅ Remplacement direct
Texas Instruments
📦 SOIC-14 (D)
4 circuits · General-purpose operational amplifier · 26 V · 3 V to 26 V · 1.2 MHz · 2 kV · -40°C to +125°C · 14-pin SOIC

Contactez-nous pour le prix

Voir la fiche technique →

LM2902D

✅ Remplacement direct
Texas Instruments
📦 SOIC-14 (D)
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

Contactez-nous pour le prix

Voir la fiche technique →

LM2902VN

✅ Remplacement direct
onsemi
📦 SOIC-14 (D)
Quad (4 independent amplifiers) · General-purpose, single-supply operational amplifier · 3 V to 32 V · ±1.5 V to ±16 V · 3 V to 26 V · 70 dB · 0.5 uA

Contactez-nous pour le prix

Voir la fiche technique →

LM2902KAVQDR Valeurs maximales et caractéristiques électriques

Product Type Quad general-purpose operational amplifier
Number of Amplifiers 4 circuits
Maximum Supply Voltage 30 V
Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/µs
Input Offset Voltage 2 mV
ESD Protection 2 kV
Courant d'alimentation 1.4 mA
Courant de repos 0.8 mA typical
Common-Mode Input Voltage Range Includes 0 V typical
Plage de température de fonctionnement -40 °C to +125 °C
Boîtier 14-pin SOIC (D)
Type de montage Surface mount

Configuration des broches de LM2902KAVQDR

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Broche 1 OUT1 — Amplifier 1 output
Broche 2 IN1- — Amplifier 1 inverting input
Broche 3 IN1+ — Amplifier 1 non-inverting input
Broche 4 V+ — Positive supply connection
Broche 5 IN2+ — Amplifier 2 non-inverting input
Broche 6 IN2- — Amplifier 2 inverting input
Broche 7 OUT2 — Amplifier 2 output
Broche 8 OUT3 — Amplifier 3 output
Broche 9 IN3- — Amplifier 3 inverting input
Broche 10 IN3+ — Amplifier 3 non-inverting input
Broche 11 V- — Negative supply connection
Broche 12 IN4+ — Amplifier 4 non-inverting input
Broche 13 IN4- — Amplifier 4 inverting input
Broche 14 OUT4 — Amplifier 4 output

Applications typiques

LM2902KAVQDR convient pour 6 applications: Industrial Sensor Signal Conditioning, Active Filtering and Analog Control, Audio Preamplification, Power-Supply Feedback and Monitoring, Data Acquisition and Instrumentation, Battery and Portable Equipment.

🏭

Industrial Sensor Signal Conditioning

The LM2902KAVQDR is well suited to conditioning low-frequency sensor outputs because its four channels can amplify, buffer, and filter several related signals in one 14-pin SOIC package. Its 3 V to 32 V supply range supports industrial rails, while 1.2 MHz bandwidth and 0.5 V/µs slew rate are ample for common temperature, pressure, and position sensor interfaces. The improved 2 kV ESD protection is useful where sensor wiring enters the enclosure. Designers should still check input bias current, common-mode limits, and source impedance when using high-impedance sensors.

🔧

Active Filtering and Analog Control

The LM2902KAVQDR can implement first-order and modest higher-order active filters in control boards where several channels are required. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, and the 0.5 V/µs slew rate helps preserve large-signal behavior in filter stages. Four independent amplifiers reduce package count compared with separate single or dual devices. Stable passive component selection, adequate output loading, and careful feedback routing are important because the amplifier is intended for general-purpose rather than precision low-noise applications.

🎧

Audio Preamplification

The LM2902KAVQDR can provide gain stages for low-frequency audio signals in consumer, communications, and industrial equipment. Its 1.2 MHz bandwidth and 0.5 V/µs slew rate accommodate common audio-band preamplifier requirements, while four channels can support stereo and monitoring functions. The 2 mV input offset is generally practical for audio signal paths but is not a precision instrumentation specification. Designers should account for the bipolar amplifier’s noise, output-current capability, load impedance, and supply-headroom requirements when setting gain and filtering.

⚡

Power-Supply Feedback and Monitoring

The LM2902KAVQDR can monitor a regulated output, amplify a feedback error, and provide auxiliary control or comparison functions in power-supply subsystems. Its wide 3 V to 32 V operating range allows use across many industrial supply levels, and the four-channel configuration supports more than one feedback or monitoring function. The 1.2 MHz bandwidth is appropriate for slow regulation loops and supervisory circuits, not high-frequency compensation. Verify the common-mode input range at the selected supply voltage and use the manufacturer’s stability and output-capacitor guidance for the exact topology.

📟

Data Acquisition and Instrumentation

The LM2902KAVQDR is appropriate for buffering and modest amplification stages in low-speed data-acquisition systems. Four channels allow a compact implementation of multiple input amplifiers or differential-to-single-ended conversion stages. The 1.2 MHz gain-bandwidth product and 2 mV offset voltage are useful for general instrumentation, while the 2 kV ESD rating improves robustness around protected external connectors. High-precision measurement designs should assess offset and drift against their error budget, while higher-speed or lower-noise applications may require a different amplifier family.

📱

Battery and Portable Equipment

The LM2902KAVQDR can perform low-frequency amplification, thresholding, and signal shaping in battery-operated equipment operating from a compatible supply. Its low supply-current drain is independent of supply voltage according to the family description, helping support portable operation across changing rail conditions. The device also operates from single or split supplies and includes 2 kV ESD protection for accessory-connected inputs. System designers should calculate the amplifier’s power consumption at the actual load and supply voltage and ensure that input and output swing limits remain satisfied near battery discharge.

What is the operating voltage range of LM2902KAVQDR?
The LM2902KAVQDR operates from a single supply of 3 V to 32 V, or from suitable split dual supplies. Texas Instruments describes the device as a 30 V quad general-purpose operational amplifier with a 1.2 MHz gain-bandwidth product. The 14-pin SOIC package and wide supply range make it appropriate for industrial, automotive-adjacent, and general analog circuits where the system supply remains within the device rating.
What are the key specifications of LM2902KAVQDR that engineers should know?
The LM2902KAVQDR provides four independent general-purpose amplifiers in a 14-pin SOIC package, with 30 V maximum supply voltage, 1.2 MHz gain-bandwidth product, 0.5 V/µs slew rate, 2 mV input offset voltage, and improved 2 kV ESD protection. These parameters position it as a low-speed, general-purpose amplifier for buffering, filtering, sensor conditioning, and control applications rather than precision or high-speed signal paths.
Where can I download the LM2902KAVQDR datasheet PDF?
The official LM2902KAVQDR technical information is available from the Texas Instruments LM2902KAV product page at https://www.ti.com/product/LM2902KAV. The ordering page at https://www.ti.com/product/LM2902KAV/part-details/LM2902KAVQDR identifies the 14-pin SOIC package and -40 °C to +125 °C temperature range. Use the manufacturer datasheet and pin-description table when assigning PCB tracks and selecting external compensation or bias components.
Where can I find the LM2902KAVQDR pinout?
The LM2902KAVQDR uses a 14-pin SOIC package, and its pinout is identified in the manufacturer datasheet under the LM2902KAV documentation. For the SOIC-14 outline, the four amplifier sections use paired inverting and non-inverting inputs, four outputs, and the supply connections. Verify the exact pin numbers against the manufacturer pin-description table before routing sensitive or high-impedance input nets.
Where to buy LM2902KAVQDR online?
Use the Request a Quote form on this page to request LM2902KAVQDR pricing, current availability, and lead time for the exact Texas Instruments MPN and package. The form is the appropriate route for a quote or order inquiry, while the product page and ordering information can be used to confirm the manufacturer part number, package, and lifecycle details.
What is the price of LM2902KAVQDR?
Current pricing for LM2902KAVQDR should be requested through the Request a Quote form on this page because quotation-based supply conditions and volume requirements affect the commercial result. The form supports inquiries for the exact LM2902KAVQDR MPN, including the 14-pin SOIC package, rather than a generic LM2902 family or a different orderable suffix.
What is the lead time for LM2902KAVQDR?
Request the current lead time and minimum order quantity for LM2902KAVQDR using the Request a Quote form on this page. Lead time can change with inventory, order quantity, and manufacturing conditions, so the form should be used for the exact 14-pin SOIC orderable MPN rather than relying on a generic family listing.
Is LM2902KAVQDR in stock?
Use the Request a Quote form on this page to check current stock status for LM2902KAVQDR. The form provides a direct inquiry path for the exact Texas Instruments orderable part number and package, allowing procurement to confirm availability rather than inferring stock status from a generic product page.
What is the best drop-in replacement for LM2902KAVQDR?
LM2902DR is a documented same-manufacturer SOIC-14 alternative to LM2902KAVQDR, with the same quad general-purpose amplifier configuration and 1.2 MHz class of operation. However, the KAV suffix includes improved 2 kV ESD protection, so a replacement should be checked for ESD requirements as well as supply voltage, offset voltage, temperature range, and exact pin configuration before production use.
Can LM2902KDR replace LM2902KAVQDR?
LM2902KDR is a close same-family Texas Instruments SOIC-14 candidate, but it should not be treated as an unconditional substitute for LM2902KAVQDR. The KAV part is identified by improved 2 kV ESD protection, whereas the exact KDR variant’s ESD rating and ordering characteristics must be confirmed in its datasheet. Validate the required ESD level, supply range, temperature grade, and electrical limits before substitution.
What is the best onsemi equivalent for LM2902KAVQDR?
LM2902VN is a cross-manufacturer quad operational-amplifier candidate associated with the LM2902 family in comparison listings, but it should not be installed as a drop-in substitute without checking its package drawing and electrical specifications. The LM2902KAVQDR uses a 14-pin SOIC and includes improved 2 kV ESD protection; confirm pinout, supply limits, ESD rating, offset voltage, bandwidth, and temperature grade for the exact onsemi orderable part.
LM2902KAVQDR vs LM2902DR - which is better for industrial signal conditioning?
Choose LM2902KAVQDR when improved 2 kV ESD protection is important; choose LM2902DR when its documented electrical characteristics meet the circuit requirements and the ESD distinction is not critical. Both are quad general-purpose amplifiers associated with the 14-pin SOIC format and the LM2902 performance class, but the final decision must include input protection, offset voltage, supply range, temperature grade, and lifecycle requirements.
What is the difference between LM2902KAVQDR and LM2902D?
The LM2902KAVQDR is the 14-pin SOIC orderable configuration with the KAV feature set, including improved 2 kV ESD protection. LM2902D is a related LM2902 quad operational amplifier listed in comparison references, but its exact package, ESD rating, temperature grade, and electrical limits must be checked against the required circuit. Do not rely on the family name alone for a production substitution.
When should I choose LM2902KAVQDR over LM2902DR?
Choose LM2902KAVQDR over LM2902DR when external wiring, connectors, or user-accessible inputs require the improved 2 kV ESD protection associated with the KAV version. LM2902DR may be appropriate when the circuit is well protected and its complete electrical specifications satisfy the design. Both parts must also satisfy the same supply-voltage, bandwidth, offset, package, and temperature requirements.
Is LM2902KAVQDR suitable for sensor amplifier applications?
The LM2902KAVQDR is suitable for many low-frequency sensor-signal conditioning applications because it provides four amplifiers, 3 V to 32 V supply operation, 1.2 MHz bandwidth, and 2 kV ESD protection. Its 2 mV input offset is appropriate for general-purpose conditioning but may limit precision measurements. Sensor source impedance, noise, input bias current, common-mode range, and required accuracy should be checked before final selection.
How should LM2902KAVQDR be decoupled on a PCB?
Place a local bypass capacitor at each supply connection and keep the connection from the capacitor to the device pins as short and low-inductance as practical. The manufacturer datasheet and typical application information should be used for the final capacitor values and layout. Keep sensitive input and feedback traces away from high-current switching nodes, and provide a low-impedance return path for each amplifier channel.

Données de référence d'ingénierie pour LM2902KAVQDR — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LM2902KAVQDR for general-purpose analog signal conditioning where four channels, a 3 V to 32 V supply range, 1.2 MHz bandwidth, and improved 2 kV ESD protection are required in a 14-pin SOIC package. LM2902DR is a practical same-manufacturer alternative when the circuit does not depend on the KAV ESD feature, but its exact electrical limits and ordering grade must be confirmed. LM2902KDR and LM2902D are related TI candidates whose suffix-specific ESD, temperature, and parameter differences require review. LM2902VN may suit a cross-manufacturer sourcing strategy, but verify its exact SOIC-14 pinout, electrical limits, temperature grade, and ESD rating. For high-speed, precision, low-noise, or rail-to-rail applications, choose an amplifier family explicitly designed for those requirements rather than assuming LM2902-family interchangeability.

Comparaison avec les alternatives

Paramètre Ce produit LM2902DR LM2902KDR LM2902D LM2902VN
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Package SOIC-14 (D) SOIC-14 (D) SOIC-14 (D) SOIC-14 (D) SOIC-14 (D)
Amplifier Count 4 4 4 4 4

Principaux différenciateurs

  • Improved ESD protection for exposed analog inputs (vs LM2902DR)
  • Four general-purpose channels in one SOIC package (vs LM2902VN)
  • Wide supply operating range for industrial and control systems (vs LM2902D)

Notes de conception

Place a local bypass capacitor at each supply connection and keep the power-loop path short. The LM2902KAVQDR can operate from 3 V to 32 V, but the usable input and output range still depends on the selected single- or dual-supply arrangement. Confirm common-mode input limits and output swing before selecting gain. If an unused channel is not needed, follow the manufacturer’s recommended input configuration rather than allowing a floating high-impedance input.

Route each amplifier’s inverting and feedback components close to the corresponding pins to minimize parasitic feedback and oscillation risk. Keep high-impedance input traces short and away from switching nodes, inductors, and power-supply routing. The SOIC-14 footprint provides adequate space for four channels, but channel-to-channel isolation is still important when adjacent circuitry handles fast signals or high impedance.

Do not treat the 1.2 MHz gain-bandwidth product as suitable for high-speed signal processing, and do not assume that every LM2902-family suffix has the same ESD rating. The KAV version is identified by improved 2 kV ESD protection. Verify the exact suffix, package, temperature grade, common-mode range, and output-swing limits against the manufacturer datasheet before approving a substitution or using external connector inputs.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The product pages identify the device as a Texas Instruments 14-pin SOIC operational amplifier, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements are not present in the available information.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

LM2902KAVQDR datasheet LM2902KAVQDR pinout LM2902KAVQDR datasheet pdf LM2902KAVQDR equivalent LM2902KAVQDR replacement LM2902KAVQDR cross reference LM2902KAVQDR vs LM2902DR LM2902KAVQDR SOIC-14 pinout LM2902KAVQDR 2kV ESD LM2902KAVQDR 1.2MHz amplifier Texas Instruments LM2902KAVQDR LM2902KAVQDR price LM2902KAVQDR stock

Composants & termes associés

Texas Instruments LM2902KAVQDR LM2902KAV LM2902DR LM2902KDR LM2902D LM2902VN onsemi quad operational amplifier general-purpose amplifier analog signal conditioning voltage amplifier semiconductor SOIC-14 SOIC package family surface-mount package gain-bandwidth product slew rate input offset voltage ESD protection industrial sensor interface active filter audio preamplifier power-supply feedback
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ