LM2902KAVQDR - 30V Quad Op Amp with 2kV ESD | Texas Instruments
料号: LM2902KAVQDR ✓ 量产中LM2902KAVQDR 概述
An operational amplifier is an active analog semiconductor that uses high open-loop gain to amplify voltage differences between its inverting and non-inverting inputs. The LM2902 belongs to the general-purpose operational-amplifier hierarchy, which is widely used in industrial controls, sensor interfaces, audio equipment, power-supply monitoring, and embedded analog systems. Its four independent channels make it useful when a board needs several similar low-speed analog functions without using four separate packages.
The key features of the LM2902KAVQDR include a wide 3 V to 32 V supply range, a 1.2 MHz typical gain-bandwidth product, 0.5 V/µs slew rate, and approximately 1.4 mA supply current per amplifier. The KAV version includes improved ESD protection rated at 2 kV, making it suitable for applications where exposed connector pins or external wiring can introduce electrostatic discharge. The 2 mV input offset voltage is suitable for general-purpose signal conditioning rather than precision instrumentation applications.
The LM2902KAVQDR is based on a bipolar operational-amplifier architecture. Its four channels are designed for operation from a single supply or from split dual supplies. With a 30 V maximum supply rating, the amplifier can process signals in industrial and automotive-related circuits when the system transient and ESD requirements are controlled appropriately. The 1.2 MHz bandwidth is appropriate for low-frequency audio, control, sensor, and feedback applications rather than high-speed signal processing.
Typical applications include sensor signal conditioning, transducer amplification, active filtering, voltage comparison, audio preamplification, current-sense feedback, and general-purpose power-supply control. Because the device is a four-channel amplifier, board designers can use one SOIC-14 package for multiple analog functions while reducing component count and simplifying PCB layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be handled according to the manufacturer’s recommended configuration.
This page combines the LM2902KAVQDR operating details, package information, practical design guidance, and verified drop-in alternatives to support component selection and board-level implementation.
直接替换替代料: LM2902KAVQDR ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: LM2902KAVQDR (相同外形与封装尺寸) ——差异在于 Product Type, Maximum Supply Voltage, Package, Supply Configuration, Operating Temperature Range.
LM2902DR
✅ 直接替换联系询价
查看数据手册 →LM2902KDR
✅ 直接替换联系询价
查看数据手册 →LM2902KAVQDR 最大额定值与电气特性
| Product Type | Quad general-purpose operational amplifier |
| Number of Amplifiers | 4 circuits |
| Maximum Supply Voltage | 30 V |
| Supply Voltage Range | 3 V to 32 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.5 V/µs |
| Input Offset Voltage | 2 mV |
| ESD Protection | 2 kV |
| 电源电流 | 1.4 mA |
| 静态电流 | 0.8 mA typical |
| Common-Mode Input Voltage Range | Includes 0 V typical |
| 工作温度范围 | -40 °C to +125 °C |
| 封装 | 14-pin SOIC (D) |
| 安装类型 | Surface mount |
LM2902KAVQDR 引脚配置
| 引脚 1 | OUT1 — Amplifier 1 output |
| 引脚 2 | IN1- — Amplifier 1 inverting input |
| 引脚 3 | IN1+ — Amplifier 1 non-inverting input |
| 引脚 4 | V+ — Positive supply connection |
| 引脚 5 | IN2+ — Amplifier 2 non-inverting input |
| 引脚 6 | IN2- — Amplifier 2 inverting input |
| 引脚 7 | OUT2 — Amplifier 2 output |
| 引脚 8 | OUT3 — Amplifier 3 output |
| 引脚 9 | IN3- — Amplifier 3 inverting input |
| 引脚 10 | IN3+ — Amplifier 3 non-inverting input |
| 引脚 11 | V- — Negative supply connection |
| 引脚 12 | IN4+ — Amplifier 4 non-inverting input |
| 引脚 13 | IN4- — Amplifier 4 inverting input |
| 引脚 14 | OUT4 — Amplifier 4 output |
典型应用
LM2902KAVQDR 适用于 6 应用s: Industrial Sensor Signal Conditioning, Active Filtering and Analog Control, Audio Preamplification, Power-Supply Feedback and Monitoring, Data Acquisition and Instrumentation, Battery and Portable Equipment.
Industrial Sensor Signal Conditioning
The LM2902KAVQDR is well suited to conditioning low-frequency sensor outputs because its four channels can amplify, buffer, and filter several related signals in one 14-pin SOIC package. Its 3 V to 32 V supply range supports industrial rails, while 1.2 MHz bandwidth and 0.5 V/µs slew rate are ample for common temperature, pressure, and position sensor interfaces. The improved 2 kV ESD protection is useful where sensor wiring enters the enclosure. Designers should still check input bias current, common-mode limits, and source impedance when using high-impedance sensors.
推荐
Active Filtering and Analog Control
The LM2902KAVQDR can implement first-order and modest higher-order active filters in control boards where several channels are required. Its 1.2 MHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, and the 0.5 V/µs slew rate helps preserve large-signal behavior in filter stages. Four independent amplifiers reduce package count compared with separate single or dual devices. Stable passive component selection, adequate output loading, and careful feedback routing are important because the amplifier is intended for general-purpose rather than precision low-noise applications.
推荐
Audio Preamplification
The LM2902KAVQDR can provide gain stages for low-frequency audio signals in consumer, communications, and industrial equipment. Its 1.2 MHz bandwidth and 0.5 V/µs slew rate accommodate common audio-band preamplifier requirements, while four channels can support stereo and monitoring functions. The 2 mV input offset is generally practical for audio signal paths but is not a precision instrumentation specification. Designers should account for the bipolar amplifier’s noise, output-current capability, load impedance, and supply-headroom requirements when setting gain and filtering.
推荐
Power-Supply Feedback and Monitoring
The LM2902KAVQDR can monitor a regulated output, amplify a feedback error, and provide auxiliary control or comparison functions in power-supply subsystems. Its wide 3 V to 32 V operating range allows use across many industrial supply levels, and the four-channel configuration supports more than one feedback or monitoring function. The 1.2 MHz bandwidth is appropriate for slow regulation loops and supervisory circuits, not high-frequency compensation. Verify the common-mode input range at the selected supply voltage and use the manufacturer’s stability and output-capacitor guidance for the exact topology.
推荐
Data Acquisition and Instrumentation
The LM2902KAVQDR is appropriate for buffering and modest amplification stages in low-speed data-acquisition systems. Four channels allow a compact implementation of multiple input amplifiers or differential-to-single-ended conversion stages. The 1.2 MHz gain-bandwidth product and 2 mV offset voltage are useful for general instrumentation, while the 2 kV ESD rating improves robustness around protected external connectors. High-precision measurement designs should assess offset and drift against their error budget, while higher-speed or lower-noise applications may require a different amplifier family.
推荐
Battery and Portable Equipment
The LM2902KAVQDR can perform low-frequency amplification, thresholding, and signal shaping in battery-operated equipment operating from a compatible supply. Its low supply-current drain is independent of supply voltage according to the family description, helping support portable operation across changing rail conditions. The device also operates from single or split supplies and includes 2 kV ESD protection for accessory-connected inputs. System designers should calculate the amplifier’s power consumption at the actual load and supply voltage and ensure that input and output swing limits remain satisfied near battery discharge.
推荐
工程参考数据: LM2902KAVQDR ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LM2902DR | LM2902KDR | LM2902D | LM2902VN |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | onsemi |
| Package | SOIC-14 (D) | SOIC-14 (D) | SOIC-14 (D) | SOIC-14 (D) | SOIC-14 (D) |
| Amplifier Count | 4 | 4 | 4 | 4 | 4 |
关键差异点
- Improved ESD protection for exposed analog inputs (对比 LM2902DR)
- Four general-purpose channels in one SOIC package (对比 LM2902VN)
- Wide supply operating range for industrial and control systems (对比 LM2902D)
设计说明
Place a local bypass capacitor at each supply connection and keep the power-loop path short. The LM2902KAVQDR can operate from 3 V to 32 V, but the usable input and output range still depends on the selected single- or dual-supply arrangement. Confirm common-mode input limits and output swing before selecting gain. If an unused channel is not needed, follow the manufacturer’s recommended input configuration rather than allowing a floating high-impedance input.
Route each amplifier’s inverting and feedback components close to the corresponding pins to minimize parasitic feedback and oscillation risk. Keep high-impedance input traces short and away from switching nodes, inductors, and power-supply routing. The SOIC-14 footprint provides adequate space for four channels, but channel-to-channel isolation is still important when adjacent circuitry handles fast signals or high impedance.
Do not treat the 1.2 MHz gain-bandwidth product as suitable for high-speed signal processing, and do not assume that every LM2902-family suffix has the same ESD rating. The KAV version is identified by improved 2 kV ESD protection. Verify the exact suffix, package, temperature grade, common-mode range, and output-swing limits against the manufacturer datasheet before approving a substitution or using external connector inputs.
合规信息
The product pages identify the device as a Texas Instruments 14-pin SOIC operational amplifier, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements are not present in the available information.