Texas Instruments

LM2904M/NOPB - Dual 26V 700kHz Op Amp | Texas Instruments

Référence : LM2904M/NOPB ✓ Actif
26 V Vdss 8-pin SOIC Package Internally compensated Speed
MOQ : 1 |

LM2904M/NOPB Présentation

Texas Instruments LM2904M/NOPB is a dual, low-power, high-gain operational amplifier rated for a 26 V supply and a 700 kHz gain-bandwidth product. The device is supplied in an 8-pin SOIC package and provides two independent, internally frequency-compensated amplifiers. It is designed for operation from a single power supply over a wide voltage range, while split-supply operation is also supported. The LM2904 family targets general-purpose analog signal conditioning where low power consumption, wide supply-voltage tolerance, and conventional dual-amplifier pin arrangements are important.

An operational amplifier is an analog signal-processing IC that uses high open-loop gain to amplify differences between voltages applied to its inverting and non-inverting inputs. A dual operational amplifier contains two amplifier sections in one package, reducing board area and simplifying designs that require two independent gain stages. Within the broader semiconductor hierarchy, the LM2904 is an amplifier IC, then an operational amplifier, and finally a general-purpose analog building block for instrumentation, control, and signal-conditioning systems.

Key characteristics include a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, low-power operation, internally compensated frequency response, and operation across single- and split-supply arrangements. These features make the LM2904M/NOPB appropriate for transducers, low-frequency analog filters, sensor amplifiers, and general feedback-control circuits. The manufacturer describes the device as a dual low-power, high-gain operational amplifier specifically designed for single-supply operation over a wide range of voltages.

Internally, each amplifier section uses frequency compensation to provide stable closed-loop operation without requiring an external compensation network. The two sections are independent, allowing them to serve separate signal paths or to work together as stages within a larger analog circuit. The 700 kHz gain-bandwidth product favors low-frequency rather than high-speed signal applications, while the 26 V supply rating provides useful headroom for industrial and automotive-style supply environments when the complete circuit satisfies the device ratings.

Typical uses include amplifying outputs from sensors, buffering potentiometer and resistive-divider signals, implementing active low-pass or high-pass filters, and closing loops around slow analog control systems. Two amplifiers in one 8-pin SOIC can also form instrumentation-style signal-conditioning chains when the required common-mode range, output swing, and noise performance match the application.

For PCB design, verify the exact pin orientation and exposed or non-exposed package details against the manufacturer pin configuration before routing copper. Place input and feedback components close to the relevant amplifier pins, maintain short ground-return paths, and use a stable local supply-decoupling arrangement. Avoid designs requiring the high slew rate and wide bandwidth of precision or high-speed amplifiers; the LM2904 is better suited to economical, general-purpose low-frequency analog functions.

This product page consolidates the manufacturer family specifications, verified distributor identification, same-footprint alternatives, application guidance, and practical design considerations. It supports faster part identification while keeping datasheet verification, footprint review, and application-specific validation at the center of every engineering decision.

Alternatives de remplacement direct pour LM2904M/NOPB — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec LM2904M/NOPB (même facteur de forme et même empreinte) — différant par Package, Operating Temperature Range, Slew Rate, Amplifier Type, Number of Amplifiers.

Texas Instruments
Package: 8-SOIC, 0.154 in body width
Slew Rate: 0.3 V/µs
Amplifier Type: General-purpose operational amplifier
Texas Instruments
Package: SOIC-8 (D)
Operating Temperature Range: -40 C to +125 C
Slew Rate: 0.5 V/us (typical)
Texas Instruments
Package: 8-SOIC
Operating Temperature Range: -40 °C to 85 °C
onsemi
Slew Rate: 500 V/ms
Amplifier Type: Dual general-purpose operational amplifier
Texas Instruments
Package: 8-SOIC
Slew Rate: 0.3 V/us
Amplifier Type: General-purpose operational amplifier
Texas Instruments
Package: 8-SOIC
Amplifier Type: Dual general-purpose operational amplifier
Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Texas Instruments
Operating Temperature Range: -40 °C to 125 °C
Amplifier Type: General-Purpose Operational Amplifier

LM2904QD

✅ Remplacement direct
Texas Instruments
📦 SOIC-8
Dual general-purpose operational amplifier · 2 channels · 26 V · 700 kHz · Automotive · SOP · 8 terminals · Gull wing

Contactez-nous pour le prix

Voir la fiche technique →

LM2904-N

✅ Remplacement direct
📦 SOIC-8
Gain-bandwidth product increases from 700 kHz to 1 MHz, a 43% increase; the LM2904M/NOPB therefore remains preferable where the slower bandwidth is sufficient

📋 Alternative de référence (hors catalogue)

LM2904BIDR

✅ Remplacement direct
Texas Instruments
📦 SOIC-8
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

Contactez-nous pour le prix

Voir la fiche technique →

LM2904M

✅ Remplacement direct
Texas Instruments
📦 SOIC-8
Dual general-purpose operational amplifier · 2 circuits · 26 V · 700 kHz · 8-SOIC · -40 °C to 85 °C · Surface mount

Contactez-nous pour le prix

Voir la fiche technique →

LM2904M/NOPB Valeurs maximales et caractéristiques électriques

Amplifier Type 2-circuit operational amplifier
Number of Amplifiers 2 units
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Operating Supply Type Single or split supply
Plage de température de fonctionnement -40 °C to +85 °C
Boîtier 8-pin SOIC
Type de montage Surface mount
Frequency Compensation Internally compensated

Guide de configuration des broches du LM2904M/NOPB 8-pin soic

Configuration des broches du LM2904M/NOPB (boîtier 8-pin soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.

Schéma de brochage du boîtier 8-pin soic pour le LM2904M/NOPB

Aucune donnée de brochage détaillée disponible pour LM2904M/NOPB.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

LM2904M/NOPB convient pour 6 applications: Industrial Sensor Signal Conditioning, Transducer and Instrumentation Amplification, Active Low-Frequency Filtering, Power-Supply Ripple Filtering, Audio-Band Signal Conditioning, Portable Battery-Powered Analog Systems.

🏭

Industrial Sensor Signal Conditioning

The LM2904M/NOPB is suitable for conditioning low-frequency industrial sensor signals because each of its two internally compensated amplifiers can buffer or amplify a voltage generated by resistive dividers, transducers, or switches. Its 700 kHz gain-bandwidth product supports moderate closed-loop bandwidth without the complexity of an external compensation network, while the 26 V supply rating accommodates suitably protected industrial supply rails. A practical arrangement uses one section for level shifting or gain, and the other for filtering or output buffering. Designers should verify that the sensor signal remains inside the input common-mode range and that the selected gain does not compromise closed-loop stability.

🔧

Transducer and Instrumentation Amplification

LM2904M/NOPB can form the first two stages of a discrete instrumentation signal chain when its 700 kHz bandwidth and internally compensated response suit the measurement bandwidth. One amplifier may convert a transducer output to a mid-supply reference voltage, while the second provides gain or drives a subsequent measurement stage. This arrangement avoids requiring two separate packages and can improve board utilization. The principal constraint is common-mode and output-range behavior: signal excursions must remain inside the amplifier's specified input and output limits, and resistor tolerances will contribute directly to overall measurement accuracy.

⚡

Active Low-Frequency Filtering

The LM2904M/NOPB is well suited to first- and second-order active filters operating well below its 700 kHz gain-bandwidth product. Two amplifier sections can implement Sallen-Key, multiple-feedback, or buffered active-filter arrangements for power-supply ripple attenuation, sensor smoothing, or audio-band shaping. Internal frequency compensation simplifies closed-loop realization, but component ratios and op-amp noise gain still determine the actual response. Validate gain tolerances, input slew requirements, and output drive against the intended frequency range, and use the manufacturer characteristic data to assess distortion at the required signal level.

⚡

Power-Supply Ripple Filtering

LM2904M/NOPB can buffer a sensitive analog node or provide active filtering after a power converter when ripple remains within the amplifier's bandwidth and output-swing limits. Its 26 V supply capability is useful when the signal path operates from a higher-voltage rail, while the 700 kHz gain-bandwidth product can attenuate ripple components within the closed-loop passband. The two channels allow simultaneous filtering or buffering of related rails. Designers should avoid using the amplifier beyond its output-current and output-voltage limits, and should account for the noise and DC error introduced by feedback resistors when calculating usable filtering performance.

🎧

Audio-Band Signal Conditioning

The LM2904M/NOPB can perform low-frequency audio signal conditioning, including input buffering, gain adjustment, and active equalization within its 700 kHz bandwidth capability. Its dual-amplifier configuration permits left and right channel processing in a compact board area, provided each channel operates within the same supply and loading conditions. The part is appropriate for cost-sensitive general-purpose audio paths rather than demanding low-noise mastering equipment. Designers should review output swing, slew-rate behavior, channel matching, and distortion characteristics against the signal amplitude and load, particularly when driving a low-impedance output stage.

📱

Portable Battery-Powered Analog Systems

LM2904M/NOPB is appropriate for battery-powered analog systems that need two general-purpose amplifier functions without the higher bandwidth and quiescent demand of a high-speed amplifier family. Single-supply operation simplifies the system architecture, and the dual package reduces component count for gain, buffer, and filtering stages. Low-power behavior is especially useful in portable equipment where supply energy is constrained. The designer must still verify the minimum operating supply, output-swing headroom, input common-mode range, and quiescent current for the exact temperature and grade, since the device is not a rail-to-rail precision amplifier.

What are the key specifications of LM2904M/NOPB that engineers should know?
The LM2904M/NOPB is a dual operational amplifier with a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, internal frequency compensation, and an 8-pin SOIC package. According to the Texas Instruments LM2904 product page, it is designed for single-supply operation over a wide voltage range, with split-supply operation also possible. Its two amplifier sections are independent, making the device suitable for two separate analog channels or for cascaded signal-conditioning stages within one package.
What is the operating voltage of LM2904M/NOPB?
The LM2904M/NOPB supports a maximum supply voltage of 26 V and is intended for operation from a single supply over a wide voltage range. The Texas Instruments LM2904 product page identifies the device as a dual 26 V operational amplifier and confirms that split-supply operation is also possible. Exact minimum, maximum, and recommended operating voltages for the chosen supply configuration should be confirmed in the manufacturer pin configuration and operating conditions table before final circuit design.
What is the gain-bandwidth product of LM2904M/NOPB?
The LM2904M/NOPB has a nominal gain-bandwidth product of 700 kHz. According to the Texas Instruments LM2904 product page, this figure describes the frequency range over which the internally compensated operational amplifier can provide useful closed-loop gain. It makes the part suitable for low-frequency sensor, buffer, filter, and control applications, but it should not be selected for high-speed signal paths or applications requiring modern precision-amplifier bandwidth.
What package does LM2904M/NOPB use?
The LM2904M/NOPB is supplied in an 8-pin SOIC package. The exact package identity is confirmed by the DigiKey and Mouser product listings, which describe LM2904M/NOPB as a standard general-purpose, two-circuit amplifier in 8-SOIC. Before PCB fabrication, use the manufacturer package drawing and pin configuration to verify every net, particularly because different dual-amplifier packages can use different numbering arrangements even when their basic functions are similar.
Where can I download the LM2904M/NOPB datasheet PDF?
The authoritative LM2904 family documentation is available through the Texas Instruments LM2904 product page at https://www.ti.com/product/LM2904. From that page, engineers can access the family datasheet, ordering information, pin configuration, and quality data. The LM2904M/NOPB ordering suffix identifies the specific 8-pin SOIC orderable configuration, so confirm that suffix and the package drawing against the component planned for the PCB.
Where can I find the LM2904M/NOPB pinout?
The LM2904M/NOPB pinout is identified in the pin-configuration section of the Texas Instruments LM2904 documentation at https://www.ti.com/product/LM2904. The device is an 8-pin SOIC containing two amplifier sections, but the PCB designer should map both amplifier pins, supply connections, and ground connections directly from the manufacturer drawing rather than relying on another dual-amplifier family's arrangement. This prevents errors caused by assuming that all eight-pin dual op amps share identical numbering.
What can replace LM2904M/NOPB on the same 8-pin SOIC footprint?
The closest documented replacement choices include onsemi LM2904M and Texas Instruments LM2904-family variants that use the same 8-pin SOIC arrangement. The onsemi LM2904M is explicitly identified as a two-circuit 8-SOIC amplifier, while the Texas Instruments LM2904-N family provides an upgraded 1 MHz bandwidth option. Confirm input offset, bias current, common-mode range, output swing, stability, and supply limits for the exact replacement before treating it as a drop-in substitution.
Is LM2904M/NOPB the same as onsemi LM2904M?
LM2904M/NOPB and onsemi LM2904M share the principal packaged identity of a dual operational amplifier in an 8-pin SOIC, making the onsemi device a strong footprint-level candidate. However, the slash in the Texas Instruments ordering code denotes a specific lead-free package configuration, while the onsemi MPN has its own manufacturer qualification and ordering definitions. According to the manufacturer product information for both families, verify electrical limits, offset voltage, input bias current, and stability before substitution.
When should I choose LM2904M/NOPB over LM2904-N?
Choose LM2904M/NOPB when a proven 700 kHz, low-power, internally compensated dual amplifier in an 8-pin SOIC is sufficient and cost-conscious general-purpose performance is the priority. Choose LM2904-N when the increased 1 MHz bandwidth of that Texas Instruments family is valuable and the associated electrical characteristics meet the design. The 700 kHz to 1 MHz increase is about 43%, so the choice can materially improve closed-loop bandwidth in frequency-sensitive designs.
Is LM2904M/NOPB suitable for sensor and transducer signal conditioning?
Yes, LM2904M/NOPB is suitable for many low-frequency sensor and transducer signal-conditioning circuits. Its dual 700 kHz amplifiers can buffer resistive dividers, amplify transducer outputs, or implement active filters, while the wide supply-voltage capability supports practical single-supply systems. The input common-mode range and output swing must remain inside the device limits throughout the sensor range; a rail-to-rail amplifier may be preferable when the signal approaches a supply rail.
What is the best onsemi equivalent for LM2904M/NOPB?
The onsemi LM2904M is the clearest same-package alternative identified for LM2904M/NOPB because it is also described as a dual operational amplifier in an 8-pin SOIC. This makes it suitable for footprint-level evaluation, subject to a complete comparison of electrical characteristics and lifecycle requirements. The Texas Instruments LM2904 documentation and onsemi LM2904M product information should both be consulted before approving the change, especially for input bias current, offset voltage, common-mode range, and output-drive behavior.
Where to buy LM2904M/NOPB online?
LM2904M/NOPB can be requested through the Request a Quote form on this XAIPART page. The form is the appropriate route for current commercial availability, quantity requirements, lead time, and order confirmation without embedding a static price in the technical content. Before requesting a quote, confirm the exact ordering code LM2904M/NOPB, the 8-pin SOIC footprint, reel or other shipping configuration, and your required delivery date.
What is the price of LM2904M/NOPB?
The current commercial price for LM2904M/NOPB is shown through the Request a Quote workflow on this page. Use that form with your required quantity, packaging preference, and destination to obtain a current quotation and availability confirmation. The technical specifications on this page intentionally remain independent of short-lived price movements, while the ordering workflow supplies current commercial terms for the exact MPN.
What is the lead time for LM2904M/NOPB and is it in stock?
Current LM2904M/NOPB stock status and lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, shipment configuration, destination country, and target delivery date so the order response can reflect the actual supply position. The manufacturer product page remains the source for family lifecycle and ordering information, while the quote workflow provides transaction-specific availability.
Does LM2904M/NOPB need external frequency-compensation components?
No external frequency-compensation network is required for the LM2904M/NOPB because both amplifier sections are internally frequency compensated. According to the Texas Instruments LM2904 family description, the device is a high-gain, internally frequency-compensated operational amplifier. This simplifies closed-loop implementation and makes the part practical for basic inverting, non-inverting, buffering, and filtering stages, provided the selected noise gain and signal bandwidth remain within the device's stable operating region.
What design considerations matter for a LM2904M/NOPB PCB?
Keep feedback resistors, input components, and bypass capacitors close to the associated LM2904M/NOPB pins, and provide a low-impedance ground return for the two amplifier sections. The Texas Instruments LM2904 documentation supports single- and split-supply use, but each configuration still requires correct bypass placement and careful routing around high-impedance inputs. Before layout release, verify pin numbering, supply polarity, decoupling values, and output stability directly from the manufacturer application information.

Données de référence d'ingénierie pour LM2904M/NOPB — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose LM2904M/NOPB for conventional low-frequency analog designs that need two internally compensated amplifiers, a 700 kHz gain-bandwidth product, and operation from a suitably protected supply up to the 26 V family rating. It is particularly useful for buffering, general-purpose gain, active filtering, and transducer conditioning where rail-to-rail operation is not required. LM2904-N is preferable when the additional bandwidth is meaningful, while LM2904QD can be considered when its specific qualification and electrical table better matches the design. The onsemi LM2904M is the principal second-source footprint candidate, but engineers should compare offset voltage, bias current, output swing, common-mode range, noise, and temperature qualification rather than relying on package equivalence alone. If the signal reaches a supply rail or requires low offset and low bias current, a rail-to-rail precision family should be selected instead.

Comparaison avec les alternatives

Paramètre Ce produit LM2904QD LM2904-N LM2904B LM2904M
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Count 2 2 2 2 2

Principaux différenciateurs

  • Retains the established 700 kHz bandwidth class (vs LM2904-N)
  • Established Texas Instruments LM2904 family sourcing (vs LM2904M)
  • Two general-purpose amplifiers in one compact package (vs LM2902M)

Notes de conception

Route each amplifier's input and feedback components directly to its corresponding SOIC pins, and place local supply bypass capacitance at the device power and ground pins. High-impedance inputs should have minimal surrounding copper and a short, low-impedance ground return. Because dual amplifier packages repeat familiar functions but may assign them to different pin numbers, create the schematic around the manufacturer pin table rather than a generic eight-pin dual-op-amp drawing.

Do not assume rail-to-rail input or output behavior. Before finalizing a single-supply circuit, verify that the signal stays within the input common-mode range and that the required output level remains inside the output-swing limits, including temperature and load effects. Also check the selected closed-loop noise gain against the 700 kHz gain-bandwidth product; a high-gain stage may need additional bandwidth analysis even though the amplifier is internally compensated.

For low-frequency precision filtering, use suitable resistor and capacitor tolerances and keep the feedback network physically compact to reduce parasitic capacitance and thermal effects. The two amplifier sections are useful for filtering a signal and then buffering the result, but cascaded closed-loop bandwidth can reduce usable gain. Validate the complete signal chain with the actual source impedance and load rather than relying only on the nominal 700 kHz device bandwidth.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The NOPB ordering suffix indicates a lead-free package configuration, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement is available in the manufacturer information used for this page. Confirm the current declarations and qualification status in the Texas Instruments LM2904 product documentation.

Recherches associées

lm2904m nopb lm2904m datasheet lm2904m onsemi lm2904m eeprom lm2904m datasheet pdf LM2904M/NOPB pinout LM2904M/NOPB equivalent LM2904M/NOPB replacement LM2904M/NOPB cross reference LM2904M/NOPB price LM2904M/NOPB stock Texas Instruments LM2904M/NOPB LM2904M/NOPB SOIC-8 footprint LM2904M/NOPB sensor amplifier

Composants & termes associés

Texas Instruments LM2904M/NOPB LM2904QD LM2904-N LM2904B onsemi onsemi LM2904M operational amplifier dual operational amplifier analog amplifier IC semiconductor single-supply operation split-supply operation gain-bandwidth product internal frequency compensation low-power operation SOIC-8 SOIC package family surface-mount package SMD package active filter sensor signal conditioning transducer interface power-supply ripple filtering audio signal conditioning
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ