LPC1815JBD144551 - 180MHz ARM Cortex-M3 MCU, 768KB Flash | NXP
Référence : LPC1815JBD144551 ✓ ActifLPC1815JBD144551 Présentation
A microcontroller (MCU) is a self-contained computing element that integrates a CPU core, embedded flash and SRAM memory, and a set of dedicated peripherals on one silicon die. The LPC1815 belongs to the NXP LPC18xx series, a Cortex-M3 based family of general-purpose MCUs widely used for bridging, connectivity and control tasks. In the device hierarchy, an MCU is a type of integrated circuit, a type of microcontroller, and a type of embedded processor.
Key features of this part include a 180 MHz Cortex-M3 core with an efficient pipeline, 768 KB of flash program memory organised as 768K x 8 bits, and a supply operating range of 2.2 V to 3.6 V that matches 3.3 V industrial rails. The 144-pin LQFP package exposes a large peripheral complement and generous general-purpose I/O count for bus-heavy designs. The part is marked RoHS compliant for lead-free production.
Technically, the LPC1815 core delivers 32-bit instruction execution with Thumb-2 encoding, so both 32-bit and 16-bit instruction sets run from the same flash. The wide 144-pin LQFP footprint is chosen over smaller packages when a design needs many peripheral instances, wide bus structures or extended storage interfaces alongside the CPU. The 20 mm x 20 mm body also spreads pin density, easing routing on multi-layer boards.
Typical applications include industrial serial gateways and CAN/LIN network nodes, USB-connected data loggers and service interfaces, building and industrial automation controllers, and peripheral-heavy control boards where the large I/O count of the LQFP-144 package is more valuable than a minimal footprint.
When designing around this device, plan decoupling close to the supply pins, budget flash and SRAM usage against the 768 KB program budget, and confirm the exact pin assignment in the manufacturer datasheet before committing PCB track routing, since the 144-pin pad pattern leaves no room for guesswork.
This page consolidates distributor availability, verified pricing evidence, same-family drop-in alternatives and practical design notes into a single engineering reference that goes beyond the raw parameter tables found on standard distributor product pages.
Alternatives de remplacement direct pour LPC1815JBD144551 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec LPC1815JBD144551 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Product Type, CPU Architecture, SRAM.
LPC1815JBD144E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LPC1815JBD144E
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →LPC1816JBD144
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
LPC1817JBD144E
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LPC1822JBD144E
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LPC1813JBD144E
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →LPC1815JBD144551 Valeurs maximales et caractéristiques électriques
| Core Processor | ARM Cortex-M3 |
| Bit Width | 32-bit |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory Size | 768 KB (768K x 8) |
| Supply Voltage Range | 2.2 V to 3.6 V |
| Boîtier | LQFP-144 (20 mm x 20 mm) |
| Type de montage | Surface Mount |
| Series | LPC18xx |
| Device Family | LPC181x |
| Core Count | 1 |
| Statut RoHS | Compliant |
| Ordering Code Suffix | 551 (reel-style ordering code) |
| Manufacturer | NXP Semiconductors |
Guide de configuration des broches du LPC1815JBD144551 lqfp-144 (20 mm x 20 mm)
Configuration des broches du LPC1815JBD144551 (boîtier lqfp-144 (20 mm x 20 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour LPC1815JBD144551.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
LPC1815JBD144551 convient pour 6 applications: Industrial CAN and LIN Network Gateway, USB Data Logger and Service Interface, Building Automation and HVAC Controller, Motor and Power System Supervision Node, Secure Network Appliance Edge Device, LED Lighting and Display Controller.
Industrial CAN and LIN Network Gateway
The LPC1815JBD144551 suits industrial network nodes that must aggregate field-bus traffic and forward it upstream. Its 180 MHz ARM Cortex-M3 core gives ample headroom for protocol conversion, filtering and diagnostics on top of the 768 KB flash program budget, while the 2.2 V to 3.6 V supply range maps directly onto 3.3 V industrial rails without level shifting. The 144-lead LQFP-144 (20 mm x 20 mm) package exposes the wide peripheral set and general-purpose I/O count such gateways need for multiple bus transceivers and status LED and relay drive. In a CAN-to-Ethernet bridge the device timestamps frames, buffers bursts in SRAM and maintains protocol state without a separate DSP.
Recommandé
USB Data Logger and Service Interface
Where a device must present a USB-connected data acquisition or field service interface, the LPC1815JBD144551 provides a fast Cortex-M3 core at 180 MHz to format, buffer and packetise sensor streams without stalling acquisition. The 768 KB of flash holds a USB stack, a logging file system and application code with margin, and the 2.2 V to 3.6 V operating window simplifies powering from a single 3.3 V regulator in portable testers. The LQFP-144 package exposes the required USB, UART and timer resources on a well-characterised 20 mm x 20 mm footprint, which also eases heatsinking-free thermal design in sealed enclosures. Data is typically written to external storage over SPI while USB carries the control channel.
Recommandé
Building Automation and HVAC Controller
Building automation controllers sit on 24 V field buses and must survive long idle periods while staying responsive to occupancy and temperature changes. The LPC1815JBD144551 operates across 2.2 V to 3.6 V, so it can be fed from a regulated 3.3 V rail derived from the 24 V bus, and its 180 MHz Cortex-M3 core comfortably schedules multiple communication tasks plus control logic. With 768 KB flash there is ample room for protocol stacks, a small embedded GUI model and calibration data. The LQFP-144 (20 mm x 20 mm) package provides the I/O breadth needed for triac drive outputs, sensor inputs and bus transceivers while keeping the design surface-mountable for automated installation.
Recommandé
Motor and Power System Supervision Node
Supervisory nodes in motor drives and power conversion systems need fast sampling, protection handling and local decision-making without relying on a central controller. The LPC1815JBD144551's 180 MHz Cortex-M3 core provides the timing margin to run fast control loops alongside communication tasks, and the 768 KB flash budget allows logging and fault-history retention on chip. Its 2.2 V to 3.6 V supply range aligns with the low-voltage auxiliary rails typical of power modules, letting the design tap an existing 3.3 V rail. The 144-lead LQFP-144 package accommodates multiple timers, capture inputs and analogue-adjacent digital functions needed for protection signalling in industrial motor and power electronics.
Recommandé
Secure Network Appliance Edge Device
Edge appliances that terminate secure links need crypto-capable processing and reliable external connectivity in a small footprint. The LPC1815JBD144551 combines a 180 MHz Cortex-M3 core with 768 KB flash, enough space for a TLS stack plus a signed firmware image and configuration store, while the 2.2 V to 3.6 V range fits standard 3.3 V network hardware rails. The LQFP-144 (20 mm x 20 mm) package exposes the Ethernet and serial resources such gateways require, and the large pad count simplifies fan-out to magnetics, PHY and memory. Because the package is mature and broadly characterised, thermal and EMC layout can follow established reference practices.
Recommandé
LED Lighting and Display Controller
Architectural and commercial lighting systems centralise dimming, colour mixing and status reporting in a controller board. The LPC1815JBD144551 provides the processing throughput for PWM dimming updates, scene scheduling and communication between lighting and building networks, with 768 KB flash holding tables, effects and a network stack. The 2.2 V to 3.6 V operating window allows direct operation from the low-voltage rail already present in constant-voltage LED drivers. The 144-lead LQFP package provides the timer and I/O resources for many dimming channels and indicator outputs, while its 20 mm x 20 mm footprint keeps the controller board compact enough for recessed housings.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour LPC1815JBD144551 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | LPC1815JBD144 | LPC1815JBD144E | LPC1816JBD144 | LPC1817JBD144 | LPC1822JBD144 |
|---|---|---|---|---|---|---|
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Supply Voltage Range | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V |
| Architecture / Bit Width | 32-bit ARM | 32-bit ARM | 32-bit ARM | 32-bit ARM | 32-bit ARM | 32-bit ARM |
| Packing / Ordering Code | 551 reel-style ordering code | Standard tray packing | E tape-and-reel suffix | Standard tray packing | Standard tray packing | Standard tray packing |
Principaux différenciateurs
- Same die and footprint as the base LPC1815JBD144, with reel-style 551 ordering for automated volume assembly (vs LPC1815JBD144)
- Larger flash budget than lower-memory LPC18xx LQFP-144 members (vs LPC1822JBD144)
- Higher clock rating than the reduced-cost family members while staying in the same 144-lead footprint (vs LPC1813JBD144)
- Trade-off: full-featured LPC1815 peripheral set versus the slimmer variants (vs LPC1816JBD144)
Notes de conception
Place the 3.3 V supply decoupling capacitors directly between the supply and ground pins of the LQFP-144 package. A 144-lead device spreads its supply and ground pins around the perimeter, so route short, wide traces to a solid ground plane and keep the via count under each supply pin high. Use the pin-assignment table in the NXP LPC18xx datasheet to identify every supply pin, because missing one pair is a common cause of marginal USB or Ethernet clock performance.
Isolate the 180 MHz Cortex-M3 clock and high-speed memory interface routing from analogue or sensitive sensor front ends. On the 20 mm x 20 mm LQFP-144 footprint there is ample board area to keep the oscillator loop on the underside directly beneath the crystal, away from switching regulators and Ethernet magnetics. Keep the crystal load capacitors close to the pins and leave a copper guard around the oscillator network; excessive trace length on this package family is a common source of jitter and marginal USB enumeration.
Estimated: with a 3.3 V rail, 180 MHz operation and a typical per-pin current draw in the tens of milliampere class, total core and I/O current is on the order of 60-90 mA, so a 3.3 V regulator with at least 250 mA capability plus margin is appropriate. If the design also powers Ethernet magnetics or a 3.3 V radio module, split the supply so MCU transients do not modulate analogue or RF rails, and confirm the regulator's thermal rise at the highest expected activity.
Do not treat the 551 ordering code as an electrical variant of the LPC1815JBD144: it changes only the packing method, and swapping between tray and reel versions leaves firmware and layout untouched. Conversely, do not assume a lower-flash family member such as the LPC1822JBD144 is a free substitution, because the 768 KB program budget of the LPC1815JBD144551 will not fit. Re-run the linker map and peripheral assignment against the datasheet whenever you move between LPC18xx family members.
When the design includes Ethernet or USB, plan the impedance-controlled layer stack before routing. A 144-lead LQFP has fine-pitch 0.5 mm pads, so escape routing must start with a via fan-out that respects the minimum annular ring and solder mask bridge limits of your fabricator. Keep high-speed differential pairs away from the switching node of any boost or buck converter and provide a solid reference plane beneath them, since this package's pin density leaves little room for last-minute routing corrections.
Informations de conformité
RoHS compliance is stated in the NXP listing for this part number. Reach, AEC-Q100 qualification, lead-free and halogen-free declarations are not published on the listing page and should be confirmed with the manufacturer for the exact ordering code.