NXP Semiconductors

LPC1815JBD144551 - 180MHz ARM Cortex-M3 MCU, 768KB Flash | NXP

MPN: LPC1815JBD144551 ✓ Hoạt động
2.2 V to 3.6 V Vdss LQFP-144 (20 mm x 20 mm) Package 180 MHz Speed 768 KB (768K x 8) Memory
MOQ: 1 |

LPC1815JBD144551 Tóm tắt

The NXP Semiconductors LPC1815JBD144551 is a high-performance 32-bit ARM Cortex-M3 microcontroller running at up to 180 MHz with 768 KB of on-chip flash, supplied in a 144-lead LQFP package measuring 20 mm x 20 mm. The device operates from a 2.2 V to 3.6 V supply and is offered on a reel-style ordering code (551) for high-volume automated assembly lines.

A microcontroller (MCU) is a self-contained computing element that integrates a CPU core, embedded flash and SRAM memory, and a set of dedicated peripherals on one silicon die. The LPC1815 belongs to the NXP LPC18xx series, a Cortex-M3 based family of general-purpose MCUs widely used for bridging, connectivity and control tasks. In the device hierarchy, an MCU is a type of integrated circuit, a type of microcontroller, and a type of embedded processor.

Key features of this part include a 180 MHz Cortex-M3 core with an efficient pipeline, 768 KB of flash program memory organised as 768K x 8 bits, and a supply operating range of 2.2 V to 3.6 V that matches 3.3 V industrial rails. The 144-pin LQFP package exposes a large peripheral complement and generous general-purpose I/O count for bus-heavy designs. The part is marked RoHS compliant for lead-free production.

Technically, the LPC1815 core delivers 32-bit instruction execution with Thumb-2 encoding, so both 32-bit and 16-bit instruction sets run from the same flash. The wide 144-pin LQFP footprint is chosen over smaller packages when a design needs many peripheral instances, wide bus structures or extended storage interfaces alongside the CPU. The 20 mm x 20 mm body also spreads pin density, easing routing on multi-layer boards.

Typical applications include industrial serial gateways and CAN/LIN network nodes, USB-connected data loggers and service interfaces, building and industrial automation controllers, and peripheral-heavy control boards where the large I/O count of the LQFP-144 package is more valuable than a minimal footprint.

When designing around this device, plan decoupling close to the supply pins, budget flash and SRAM usage against the 768 KB program budget, and confirm the exact pin assignment in the manufacturer datasheet before committing PCB track routing, since the 144-pin pad pattern leaves no room for guesswork.

This page consolidates distributor availability, verified pricing evidence, same-family drop-in alternatives and practical design notes into a single engineering reference that goes beyond the raw parameter tables found on standard distributor product pages.

Bộ thay thế dễ dàng lắp đặt cho LPC1815JBD144551 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LPC1815JBD144551 (cùng hình factor và footprint) — khác nhau ở Package, Flash Memory, Product Type, CPU Architecture, SRAM.

NXP Semiconductors
Package: 144-LQFP
Product Type: 32-bit ARM Cortex-M3 microcontroller
CPU Architecture: 32-bit
So sánh với LPC1815JBD144551 →
NXP Semiconductors
Package: 144-LQFP (20 x 20 mm)
Flash Memory: 768 KB
Product Type: 32-bit ARM Cortex-M3 Microcontroller
So sánh với LPC1815JBD144551 →
NXP Semiconductors
Package: 144-LQFP, 20 x 20 mm
Flash Memory: 1 MB (1M x 8)
Product Type: 32-bit ARM Cortex-M3 microcontroller
So sánh với LPC1815JBD144551 →
NXP Semiconductors
Flash Memory: 512 KB
Product Type: 32-bit high-performance microcontroller
CPU Architecture: 32-bit
So sánh với LPC1815JBD144551 →

LPC1815JBD144E

✅ Drop-In
NXP Semiconductors
📦 LQFP-144 (20x20 mm)
32-bit ARM Cortex-M3 Microcontroller · 180 MHz · 768 KB · 136 KB · ARM Cortex-M3 · 32 bit · 144-LQFP (20 x 20 mm) · 144 pins

Liên hệ để biết giá

Xem tài liệu →

LPC1815JBD144E

✅ Drop-In
NXP Semiconductors
📦 LQFP-144 (20x20 mm)
32-bit ARM Cortex-M3 Microcontroller · 180 MHz · 768 KB · 136 KB · ARM Cortex-M3 · 32 bit · 144-LQFP (20 x 20 mm) · 144 pins

Liên hệ để biết giá

Xem tài liệu →

LPC1816JBD144

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 LQFP-144 (20x20 mm)
Same LPC18xx Cortex-M3 family and LQFP-144 footprint; peripheral mix differs from LPC1815 (e.g. no Ethernet MAC difference within roughly 10% of key ratings), flash budget must be re-checked

📋 Tham chiếu thay thế (không có trong danh mục)

LPC1817JBD144E

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 LQFP-144 (20x20 mm)
32-bit ARM Cortex-M3 microcontroller · 180 MHz · 1 MB (1M x 8) · 136 kB · ARM Cortex-M3 · 32-bit RISC · 3.3 V · 1 interface

Liên hệ để biết giá

Xem tài liệu →

LPC1822JBD144E

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 LQFP-144 (20x20 mm)
32-bit high-performance microcontroller · Arm Cortex-M3 · 180 MHz · 32-bit · 3 stages · 512 KB · 512K x 8 · 144-LQFP

Liên hệ để biết giá

Xem tài liệu →

LPC1813JBD144E

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 LQFP-144 (20x20 mm)
32-bit ARM Cortex-M3 microcontroller · NXP Semiconductors · ARM Cortex-M3 · 32-bit · 180 MHz · 3 stages · 512 KB · 512K x 8 bits

Liên hệ để biết giá

Xem tài liệu →

LPC1815JBD144551 Tỷ lệ tối đa & tính chất điện

Core Processor ARM Cortex-M3
Bit Width 32-bit
Maximum CPU Frequency 180 MHz
Flash Memory Size 768 KB (768K x 8)
Supply Voltage Range 2.2 V to 3.6 V
Hộp LQFP-144 (20 mm x 20 mm)
Kiểu lắp đặt Surface Mount
Series LPC18xx
Device Family LPC181x
Core Count 1
Trạng thái RoHS Compliant
Ordering Code Suffix 551 (reel-style ordering code)
Manufacturer NXP Semiconductors

Hướng dẫn cấu hình chân LPC1815JBD144551 lqfp-144 (20 mm x 20 mm)

Cấu hình chân cho LPC1815JBD144551 (lqfp-144 (20 mm x 20 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân lqfp-144 (20 mm x 20 mm) cho LPC1815JBD144551

Không có dữ liệu chân cụ thể sẵn có cho LPC1815JBD144551.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LPC1815JBD144551 phù hợp cho 6 Áp dụngs: Industrial CAN and LIN Network Gateway, USB Data Logger and Service Interface, Building Automation and HVAC Controller, Motor and Power System Supervision Node, Secure Network Appliance Edge Device, LED Lighting and Display Controller.

🏭

Industrial CAN and LIN Network Gateway

The LPC1815JBD144551 suits industrial network nodes that must aggregate field-bus traffic and forward it upstream. Its 180 MHz ARM Cortex-M3 core gives ample headroom for protocol conversion, filtering and diagnostics on top of the 768 KB flash program budget, while the 2.2 V to 3.6 V supply range maps directly onto 3.3 V industrial rails without level shifting. The 144-lead LQFP-144 (20 mm x 20 mm) package exposes the wide peripheral set and general-purpose I/O count such gateways need for multiple bus transceivers and status LED and relay drive. In a CAN-to-Ethernet bridge the device timestamps frames, buffers bursts in SRAM and maintains protocol state without a separate DSP.

🖥️

USB Data Logger and Service Interface

Where a device must present a USB-connected data acquisition or field service interface, the LPC1815JBD144551 provides a fast Cortex-M3 core at 180 MHz to format, buffer and packetise sensor streams without stalling acquisition. The 768 KB of flash holds a USB stack, a logging file system and application code with margin, and the 2.2 V to 3.6 V operating window simplifies powering from a single 3.3 V regulator in portable testers. The LQFP-144 package exposes the required USB, UART and timer resources on a well-characterised 20 mm x 20 mm footprint, which also eases heatsinking-free thermal design in sealed enclosures. Data is typically written to external storage over SPI while USB carries the control channel.

🏠

Building Automation and HVAC Controller

Building automation controllers sit on 24 V field buses and must survive long idle periods while staying responsive to occupancy and temperature changes. The LPC1815JBD144551 operates across 2.2 V to 3.6 V, so it can be fed from a regulated 3.3 V rail derived from the 24 V bus, and its 180 MHz Cortex-M3 core comfortably schedules multiple communication tasks plus control logic. With 768 KB flash there is ample room for protocol stacks, a small embedded GUI model and calibration data. The LQFP-144 (20 mm x 20 mm) package provides the I/O breadth needed for triac drive outputs, sensor inputs and bus transceivers while keeping the design surface-mountable for automated installation.

⚡

Motor and Power System Supervision Node

Supervisory nodes in motor drives and power conversion systems need fast sampling, protection handling and local decision-making without relying on a central controller. The LPC1815JBD144551's 180 MHz Cortex-M3 core provides the timing margin to run fast control loops alongside communication tasks, and the 768 KB flash budget allows logging and fault-history retention on chip. Its 2.2 V to 3.6 V supply range aligns with the low-voltage auxiliary rails typical of power modules, letting the design tap an existing 3.3 V rail. The 144-lead LQFP-144 package accommodates multiple timers, capture inputs and analogue-adjacent digital functions needed for protection signalling in industrial motor and power electronics.

🌐

Secure Network Appliance Edge Device

Edge appliances that terminate secure links need crypto-capable processing and reliable external connectivity in a small footprint. The LPC1815JBD144551 combines a 180 MHz Cortex-M3 core with 768 KB flash, enough space for a TLS stack plus a signed firmware image and configuration store, while the 2.2 V to 3.6 V range fits standard 3.3 V network hardware rails. The LQFP-144 (20 mm x 20 mm) package exposes the Ethernet and serial resources such gateways require, and the large pad count simplifies fan-out to magnetics, PHY and memory. Because the package is mature and broadly characterised, thermal and EMC layout can follow established reference practices.

💡

LED Lighting and Display Controller

Architectural and commercial lighting systems centralise dimming, colour mixing and status reporting in a controller board. The LPC1815JBD144551 provides the processing throughput for PWM dimming updates, scene scheduling and communication between lighting and building networks, with 768 KB flash holding tables, effects and a network stack. The 2.2 V to 3.6 V operating window allows direct operation from the low-voltage rail already present in constant-voltage LED drivers. The 144-lead LQFP package provides the timer and I/O resources for many dimming channels and indicator outputs, while its 20 mm x 20 mm footprint keeps the controller board compact enough for recessed housings.

What is the LPC1815JBD144551?
The LPC1815JBD144551 is a 32-bit ARM Cortex-M3 microcontroller from NXP Semiconductors running at up to 180 MHz with 768 KB of on-chip flash, supplied in a 144-lead LQFP package (20 mm x 20 mm) and specified for a 2.2 V to 3.6 V supply. It belongs to the LPC18xx general-purpose MCU family, used for industrial control, connectivity gateway and USB data-acquisition designs. The 551 suffix is the ordering code for reel-style packaging of the LPC1815JBD144 device.
What is the operating voltage of the LPC1815JBD144551?
The LPC1815JBD144551 operates from 2.2 V to 3.6 V, matching standard 3.3 V industrial and embedded system rails. According to the NXP LPC18xx datasheet family documentation, this single supply window covers both core and I/O operation, so no separate external I/O voltage rail is required for the device. Desiglgn your decoupling network for the maximum 3.6 V rail so transient margin is preserved during hot-plug or brownout events.
How much flash memory does the LPC1815JBD144551 have?
The LPC1815JBD144551 provides 768 KB of on-chip flash program memory, organised as 768K x 8 bits, together with the ARM Cortex-M3 core executing at up to 180 MHz. The 768 KB program budget is one of the larger allocations in the LPC18xx family and comfortably holds an RTOS plus application code, bootloader or large protocol stacks. Confirm available SRAM against your linker map before finalising the memory budget.
What is the maximum CPU frequency of the LPC1815JBD144551?
The LPC1815JBD144551 runs at up to 180 MHz using the ARM Cortex-M3 core, executing both 32-bit ARM and 16-bit Thumb-2 instructions from the same on-chip flash. This class of performance suits protocol-heavy gateways, USB data loggers and real-time control tasks that need deterministic response without an external DSP. Peripherals clocked from the same bus scale with the core, so peripheral timing follows the configured system clock.
What package does the LPC1815JBD144551 use?
The LPC1815JBD144551 is supplied in a 144-lead LQFP package measuring 20 mm x 20 mm, surface mount, with a reel-style ordering code (551) for automated high-volume assembly. The large LQFP-144 body is chosen when a design needs many peripheral instances and general-purpose I/O, which outweighs the board area cost compared with smaller LQFP packages in the same family. Use the pin-assignment table in the manufacturer datasheet when assigning PCB tracks.
Where can I download the LPC1815JBD144551 datasheet PDF?
The manufacturer product page for the LPC1815JBD144 device at nxp.com/part/LPC1815JBD144 links the LPC18xx datasheet in PDF form, and the same document covers the LPC1815JBD144551 ordering code because the die and pinout are identical. NXP also publishes an errata sheet for the LPC181x, LPC182x, LPC183x and LPC185x families, which is essential to check after firmware bring-up. Both documents are listed in the data sources on this page.
Where do I find the LPC1815JBD144551 pinout?
The LPC1815JBD144551 pinout is published in the NXP LPC18xx datasheet and in the pinout diagram referenced on the manufacturer product page for LPC1815JBD144, since the 551 code changes only the packing method. Because the part uses a 144-lead LQFP footprint, pin 1 identification and the counter-clockwise numbering convention must follow the datasheet package drawing. Assign board tracks from that table rather than from a generic 144-pin illustration.
Is the LPC1815JBD144551 in stock?
The LPC1815JBD144551 is currently listed as an in-stock component by NXP Semiconductors channels, with supply visible across multiple distributors including DigiKey marketplace inventory. Stock levels for a reel-coded ordering variant move with production schedules, so confirm availability for your exact suffix before committing the design to a schedule. Use the Request a Quote form on this page to check current allocation and lead time for your build quantity.
What is the price of the LPC1815JBD144551?
Pricing for the LPC1815JBD144551 depends on volume, reel packaging and current factory allocation, and it is not static: distributor listings for this ordering code move week to week. Current unit pricing for the exact part number is presented on this page from the structured pricing table, and it refreshes as channel data is collected. For a firm quotation at your required quantities, submit the Request a Quote form with your target date and reel count.
What is the lead time for the LPC1815JBD144551?
Lead time for the LPC1815JBD144551 depends on the factory backlog and the quantity of reels you need, and distributors commonly quote a standard lead time rather than spot stock for volume reel orders. Because the 551 ordering code is a reel-packaged variant, larger builds are scheduled rather than shipped from shelf stock. Request the current lead time through the Request a Quote form on this page and include your requested delivery date.
What is the difference between LPC1815JBD144 and LPC1815JBD144551?
The LPC1815JBD144 and the LPC1815JBD144551 share the same silicon die, the same 180 MHz Cortex-M3 core, the same 768 KB flash and the same 144-lead LQFP-144 footprint. The only functional difference is the ordering code: 551 denotes the reel-style packing used by high-volume automated lines, while the plain part number is supplied in the standard tray packing. Electrical behaviour is identical, so firmware and layout work transfers directly between the two.
When should I choose LPC1815JBD144551 over LPC1815JBD144?
Choose the LPC1815JBD144551 when your assembly line uses pick-and-place reel feeders and you want the LPC1815JBD144 silicon without manual tray handling; otherwise the plain LPC1815JBD144 is the equivalent choice for prototype and low-volume builds. Both are the same 180 MHz Cortex-M3 device with 768 KB flash in the identical LQFP-144 20 mm x 20 mm package, so there is no electrical, firmware or PCB difference to trade off. The decision is purely about packing format and assembly logistics.
What is the best drop-in replacement for the LPC1815JBD144551?
The closest drop-in replacements for the LPC1815JBD144551 are other LPC18xx devices in the identical LQFP-144 (20 mm x 20 mm) footprint, such as the LPC1816JBD144 and LPC1817JBD144 in the same family, which differ mainly in flash and peripheral mix. Because flash size and peripheral population differ between family members, confirm the memory map and pin usage against your schematic before substituting. Request a quote for any of these options using the Request a Quote form on this page.
Is there an STMicroelectronics equivalent for the LPC1815JBD144551?
There is no pin-compatible STMicroelectronics drop-in for the LPC1815JBD144551, because no ST Cortex-M3 device with 768 KB flash is offered in the 144-lead LQFP-144 (20 mm x 20 mm) footprint used here. ST's closest high-flash Cortex-M3 parts such as the STM32F103xE series are supplied in smaller LQFP-100 or larger LQFP-144 variants with different peripheral arrangements, so adopting them requires a board respin and peripheral re-mapping. For a no-respin path, stay within the LPC18xx LQFP-144 family.
What are the key specifications of the LPC1815JBD144551 that engineers should know?
The key engineering facts for the LPC1815JBD144551 are: ARM Cortex-M3 core at 180 MHz, 32-bit architecture, 768 KB flash organised as 768K x 8 bits, a 2.2 V to 3.6 V operating supply, and a 144-lead LQFP package measuring 20 mm x 20 mm supplied under the 551 reel ordering code. The part is RoHS compliant and currently listed as active by the manufacturer. SRAM size, I/O count and peripheral detail are confirmed in the NXP LPC18xx datasheet before board sign-off.
What can replace the LPC1815JBD144551?
A drop-in replacement for the LPC1815JBD144551 must keep the 144-lead LQFP-144 footprint, the 180 MHz-class Cortex-M3 core and the 2.2 V to 3.6 V supply window. Within the NXP LPC18xx family, LPC1816JBD144 and LPC1817JBD144 share that footprint and package, with differences in flash size and peripheral mix; LPC1815JBD144 and LPC1815JBD144E are the same die in different packing codes. Verify SRAM, flash and pin-level peripheral usage in the datasheet before dropping a substitute into an existing design.

Dữ liệu tham khảo kỹ thuật cho LPC1815JBD144551 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select the LPC1815JBD144551 when your design is built on 3.3 V industrial rails, needs 180 MHz Cortex-M3 throughput with a 768 KB program budget, and fits the 144-lead LQFP-144 (20 mm x 20 mm) footprint; the 551 ordering code additionally suits reel-fed automated assembly. Pick the plain LPC1815JBD144 for prototype and tray-based low-volume work, or LPC1815JBD144E if your stock system expects the E tape-and-reel suffix, since all three share the same die and layout. Move to LPC1816JBD144 or LPC1817JBD144 only after confirming the peripheral mix still covers your channel counts and the flash budget still fits, and consider LPC1822JBD144 only if code size allows the smaller flash class. No cross-brand Cortex-M3 device exists in this exact LQFP-144 footprint with matching memory, so switching to another vendor family means a board respin and full peripheral re-mapping rather than a drop-in replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LPC1815JBD144 LPC1815JBD144E LPC1816JBD144 LPC1817JBD144 LPC1822JBD144
Package LQFP-144 (20x20 mm) LQFP-144 (20x20 mm) - same LQFP-144 (20x20 mm) - same LQFP-144 (20x20 mm) - same LQFP-144 (20x20 mm) - same LQFP-144 (20x20 mm) - same
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Supply Voltage Range 2.2 V to 3.6 V 2.2 V to 3.6 V 2.2 V to 3.6 V 2.2 V to 3.6 V 2.2 V to 3.6 V 2.2 V to 3.6 V
Architecture / Bit Width 32-bit ARM 32-bit ARM 32-bit ARM 32-bit ARM 32-bit ARM 32-bit ARM
Packing / Ordering Code 551 reel-style ordering code Standard tray packing E tape-and-reel suffix Standard tray packing Standard tray packing Standard tray packing

Bảo phân biệt quan trọng

  • Same die and footprint as the base LPC1815JBD144, with reel-style 551 ordering for automated volume assembly (vsLPC1815JBD144)
  • Larger flash budget than lower-memory LPC18xx LQFP-144 members (vsLPC1822JBD144)
  • Higher clock rating than the reduced-cost family members while staying in the same 144-lead footprint (vsLPC1813JBD144)
  • Trade-off: full-featured LPC1815 peripheral set versus the slimmer variants (vsLPC1816JBD144)

Ghi chú thiết kế

Place the 3.3 V supply decoupling capacitors directly between the supply and ground pins of the LQFP-144 package. A 144-lead device spreads its supply and ground pins around the perimeter, so route short, wide traces to a solid ground plane and keep the via count under each supply pin high. Use the pin-assignment table in the NXP LPC18xx datasheet to identify every supply pin, because missing one pair is a common cause of marginal USB or Ethernet clock performance.

Isolate the 180 MHz Cortex-M3 clock and high-speed memory interface routing from analogue or sensitive sensor front ends. On the 20 mm x 20 mm LQFP-144 footprint there is ample board area to keep the oscillator loop on the underside directly beneath the crystal, away from switching regulators and Ethernet magnetics. Keep the crystal load capacitors close to the pins and leave a copper guard around the oscillator network; excessive trace length on this package family is a common source of jitter and marginal USB enumeration.

Estimated: with a 3.3 V rail, 180 MHz operation and a typical per-pin current draw in the tens of milliampere class, total core and I/O current is on the order of 60-90 mA, so a 3.3 V regulator with at least 250 mA capability plus margin is appropriate. If the design also powers Ethernet magnetics or a 3.3 V radio module, split the supply so MCU transients do not modulate analogue or RF rails, and confirm the regulator's thermal rise at the highest expected activity.

Do not treat the 551 ordering code as an electrical variant of the LPC1815JBD144: it changes only the packing method, and swapping between tray and reel versions leaves firmware and layout untouched. Conversely, do not assume a lower-flash family member such as the LPC1822JBD144 is a free substitution, because the 768 KB program budget of the LPC1815JBD144551 will not fit. Re-run the linker map and peripheral assignment against the datasheet whenever you move between LPC18xx family members.

When the design includes Ethernet or USB, plan the impedance-controlled layer stack before routing. A 144-lead LQFP has fine-pitch 0.5 mm pads, so escape routing must start with a via fan-out that respects the minimum annular ring and solder mask bridge limits of your fabricator. Keep high-speed differential pairs away from the switching node of any boost or buck converter and provide a solid reference plane beneath them, since this package's pin density leaves little room for last-minute routing corrections.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is stated in the NXP listing for this part number. Reach, AEC-Q100 qualification, lead-free and halogen-free declarations are not published on the listing page and should be confirmed with the manufacturer for the exact ordering code.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

LPC1815JBD144551 LPC1815JBD144551 datasheet LPC1815JBD144551 pinout LPC1815JBD144551 price LPC1815JBD144551 stock NXP LPC1815JBD144551 LPC1815JBD144 datasheet pdf LPC1815 LQFP-144 pinout LPC1815JBD144 vs LPC1816JBD144 LPC1815JBD144 drop-in replacement LPC1815 180MHz Cortex-M3 768KB flash LPC1815JBD144 equivalent MCU LPC1815JBD144 footprint LQFP 20x20

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors LPC1815JBD144551 LPC1815JBD144 LPC1815JBD144E LPC1816JBD144 LPC1817JBD144 LPC1822JBD144 LPC18xx ARM Cortex-M3 microcontroller MCU embedded processor integrated circuit 32-bit architecture 768 KB flash 768K x 8 180 MHz 2.2 V to 3.6 V supply LQFP-144 LQFP family surface mount SMD RoHS industrial gateway CAN bus USB data acquisition building automation reel and reel ordering code 551
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ