LPC1815JBD144551 - 180MHz ARM Cortex-M3 MCU, 768KB Flash | NXP
MPN: LPC1815JBD144551 ✓ 啟用中LPC1815JBD144551 概覽
A microcontroller (MCU) is a self-contained computing element that integrates a CPU core, embedded flash and SRAM memory, and a set of dedicated peripherals on one silicon die. The LPC1815 belongs to the NXP LPC18xx series, a Cortex-M3 based family of general-purpose MCUs widely used for bridging, connectivity and control tasks. In the device hierarchy, an MCU is a type of integrated circuit, a type of microcontroller, and a type of embedded processor.
Key features of this part include a 180 MHz Cortex-M3 core with an efficient pipeline, 768 KB of flash program memory organised as 768K x 8 bits, and a supply operating range of 2.2 V to 3.6 V that matches 3.3 V industrial rails. The 144-pin LQFP package exposes a large peripheral complement and generous general-purpose I/O count for bus-heavy designs. The part is marked RoHS compliant for lead-free production.
Technically, the LPC1815 core delivers 32-bit instruction execution with Thumb-2 encoding, so both 32-bit and 16-bit instruction sets run from the same flash. The wide 144-pin LQFP footprint is chosen over smaller packages when a design needs many peripheral instances, wide bus structures or extended storage interfaces alongside the CPU. The 20 mm x 20 mm body also spreads pin density, easing routing on multi-layer boards.
Typical applications include industrial serial gateways and CAN/LIN network nodes, USB-connected data loggers and service interfaces, building and industrial automation controllers, and peripheral-heavy control boards where the large I/O count of the LQFP-144 package is more valuable than a minimal footprint.
When designing around this device, plan decoupling close to the supply pins, budget flash and SRAM usage against the 768 KB program budget, and confirm the exact pin assignment in the manufacturer datasheet before committing PCB track routing, since the 144-pin pad pattern leaves no room for guesswork.
This page consolidates distributor availability, verified pricing evidence, same-family drop-in alternatives and practical design notes into a single engineering reference that goes beyond the raw parameter tables found on standard distributor product pages.
直接替換替代品,適用於 LPC1815JBD144551 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LPC1815JBD144551 (相同外形與佔位) — 差異在於 Package, Flash Memory, Product Type, CPU Architecture, SRAM.
LPC1815JBD144E
✅ 直接替換聯絡詢價
查看資料表 →LPC1815JBD144E
✅ 直接替換聯絡詢價
查看資料表 →LPC1816JBD144
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LPC1817JBD144E
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LPC1822JBD144E
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LPC1813JBD144E
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LPC1815JBD144551 最大額定值與電氣特性
| Core Processor | ARM Cortex-M3 |
| Bit Width | 32-bit |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory Size | 768 KB (768K x 8) |
| Supply Voltage Range | 2.2 V to 3.6 V |
| 封裝 | LQFP-144 (20 mm x 20 mm) |
| 安裝類型 | Surface Mount |
| Series | LPC18xx |
| Device Family | LPC181x |
| Core Count | 1 |
| RoHS 狀態 | Compliant |
| Ordering Code Suffix | 551 (reel-style ordering code) |
| Manufacturer | NXP Semiconductors |
LPC1815JBD144551 lqfp-144 (20 mm x 20 mm) 腳位配置指南
LPC1815JBD144551(lqfp-144 (20 mm x 20 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LPC1815JBD144551.
請參閱 資料表 以查看完整腳位配置。
典型應用
LPC1815JBD144551 適用於 6 應用s: Industrial CAN and LIN Network Gateway, USB Data Logger and Service Interface, Building Automation and HVAC Controller, Motor and Power System Supervision Node, Secure Network Appliance Edge Device, LED Lighting and Display Controller.
Industrial CAN and LIN Network Gateway
The LPC1815JBD144551 suits industrial network nodes that must aggregate field-bus traffic and forward it upstream. Its 180 MHz ARM Cortex-M3 core gives ample headroom for protocol conversion, filtering and diagnostics on top of the 768 KB flash program budget, while the 2.2 V to 3.6 V supply range maps directly onto 3.3 V industrial rails without level shifting. The 144-lead LQFP-144 (20 mm x 20 mm) package exposes the wide peripheral set and general-purpose I/O count such gateways need for multiple bus transceivers and status LED and relay drive. In a CAN-to-Ethernet bridge the device timestamps frames, buffers bursts in SRAM and maintains protocol state without a separate DSP.
推薦
USB Data Logger and Service Interface
Where a device must present a USB-connected data acquisition or field service interface, the LPC1815JBD144551 provides a fast Cortex-M3 core at 180 MHz to format, buffer and packetise sensor streams without stalling acquisition. The 768 KB of flash holds a USB stack, a logging file system and application code with margin, and the 2.2 V to 3.6 V operating window simplifies powering from a single 3.3 V regulator in portable testers. The LQFP-144 package exposes the required USB, UART and timer resources on a well-characterised 20 mm x 20 mm footprint, which also eases heatsinking-free thermal design in sealed enclosures. Data is typically written to external storage over SPI while USB carries the control channel.
推薦
Building Automation and HVAC Controller
Building automation controllers sit on 24 V field buses and must survive long idle periods while staying responsive to occupancy and temperature changes. The LPC1815JBD144551 operates across 2.2 V to 3.6 V, so it can be fed from a regulated 3.3 V rail derived from the 24 V bus, and its 180 MHz Cortex-M3 core comfortably schedules multiple communication tasks plus control logic. With 768 KB flash there is ample room for protocol stacks, a small embedded GUI model and calibration data. The LQFP-144 (20 mm x 20 mm) package provides the I/O breadth needed for triac drive outputs, sensor inputs and bus transceivers while keeping the design surface-mountable for automated installation.
推薦
Motor and Power System Supervision Node
Supervisory nodes in motor drives and power conversion systems need fast sampling, protection handling and local decision-making without relying on a central controller. The LPC1815JBD144551's 180 MHz Cortex-M3 core provides the timing margin to run fast control loops alongside communication tasks, and the 768 KB flash budget allows logging and fault-history retention on chip. Its 2.2 V to 3.6 V supply range aligns with the low-voltage auxiliary rails typical of power modules, letting the design tap an existing 3.3 V rail. The 144-lead LQFP-144 package accommodates multiple timers, capture inputs and analogue-adjacent digital functions needed for protection signalling in industrial motor and power electronics.
推薦
Secure Network Appliance Edge Device
Edge appliances that terminate secure links need crypto-capable processing and reliable external connectivity in a small footprint. The LPC1815JBD144551 combines a 180 MHz Cortex-M3 core with 768 KB flash, enough space for a TLS stack plus a signed firmware image and configuration store, while the 2.2 V to 3.6 V range fits standard 3.3 V network hardware rails. The LQFP-144 (20 mm x 20 mm) package exposes the Ethernet and serial resources such gateways require, and the large pad count simplifies fan-out to magnetics, PHY and memory. Because the package is mature and broadly characterised, thermal and EMC layout can follow established reference practices.
推薦
LED Lighting and Display Controller
Architectural and commercial lighting systems centralise dimming, colour mixing and status reporting in a controller board. The LPC1815JBD144551 provides the processing throughput for PWM dimming updates, scene scheduling and communication between lighting and building networks, with 768 KB flash holding tables, effects and a network stack. The 2.2 V to 3.6 V operating window allows direct operation from the low-voltage rail already present in constant-voltage LED drivers. The 144-lead LQFP package provides the timer and I/O resources for many dimming channels and indicator outputs, while its 20 mm x 20 mm footprint keeps the controller board compact enough for recessed housings.
推薦
推薦產品摘要
工程參考資料,適用於 LPC1815JBD144551 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LPC1815JBD144 | LPC1815JBD144E | LPC1816JBD144 | LPC1817JBD144 | LPC1822JBD144 |
|---|---|---|---|---|---|---|
| Package | LQFP-144 (20x20 mm) | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same | LQFP-144 (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Supply Voltage Range | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V | 2.2 V to 3.6 V |
| Architecture / Bit Width | 32-bit ARM | 32-bit ARM | 32-bit ARM | 32-bit ARM | 32-bit ARM | 32-bit ARM |
| Packing / Ordering Code | 551 reel-style ordering code | Standard tray packing | E tape-and-reel suffix | Standard tray packing | Standard tray packing | Standard tray packing |
主要差異化特點
- Same die and footprint as the base LPC1815JBD144, with reel-style 551 ordering for automated volume assembly (對比LPC1815JBD144)
- Larger flash budget than lower-memory LPC18xx LQFP-144 members (對比LPC1822JBD144)
- Higher clock rating than the reduced-cost family members while staying in the same 144-lead footprint (對比LPC1813JBD144)
- Trade-off: full-featured LPC1815 peripheral set versus the slimmer variants (對比LPC1816JBD144)
設計說明
Place the 3.3 V supply decoupling capacitors directly between the supply and ground pins of the LQFP-144 package. A 144-lead device spreads its supply and ground pins around the perimeter, so route short, wide traces to a solid ground plane and keep the via count under each supply pin high. Use the pin-assignment table in the NXP LPC18xx datasheet to identify every supply pin, because missing one pair is a common cause of marginal USB or Ethernet clock performance.
Isolate the 180 MHz Cortex-M3 clock and high-speed memory interface routing from analogue or sensitive sensor front ends. On the 20 mm x 20 mm LQFP-144 footprint there is ample board area to keep the oscillator loop on the underside directly beneath the crystal, away from switching regulators and Ethernet magnetics. Keep the crystal load capacitors close to the pins and leave a copper guard around the oscillator network; excessive trace length on this package family is a common source of jitter and marginal USB enumeration.
Estimated: with a 3.3 V rail, 180 MHz operation and a typical per-pin current draw in the tens of milliampere class, total core and I/O current is on the order of 60-90 mA, so a 3.3 V regulator with at least 250 mA capability plus margin is appropriate. If the design also powers Ethernet magnetics or a 3.3 V radio module, split the supply so MCU transients do not modulate analogue or RF rails, and confirm the regulator's thermal rise at the highest expected activity.
Do not treat the 551 ordering code as an electrical variant of the LPC1815JBD144: it changes only the packing method, and swapping between tray and reel versions leaves firmware and layout untouched. Conversely, do not assume a lower-flash family member such as the LPC1822JBD144 is a free substitution, because the 768 KB program budget of the LPC1815JBD144551 will not fit. Re-run the linker map and peripheral assignment against the datasheet whenever you move between LPC18xx family members.
When the design includes Ethernet or USB, plan the impedance-controlled layer stack before routing. A 144-lead LQFP has fine-pitch 0.5 mm pads, so escape routing must start with a via fan-out that respects the minimum annular ring and solder mask bridge limits of your fabricator. Keep high-speed differential pairs away from the switching node of any boost or buck converter and provide a solid reference plane beneath them, since this package's pin density leaves little room for last-minute routing corrections.
合規資訊
RoHS compliance is stated in the NXP listing for this part number. Reach, AEC-Q100 qualification, lead-free and halogen-free declarations are not published on the listing page and should be confirmed with the manufacturer for the exact ordering code.