Maxim Integrated

MAX211EEWI+ - 15kV ESD 4/5 RS-232 Transceiver | Maxim

Référence : MAX211EEWI+ ✓ Actif
4.5V to 5.5V Vdss 28-pin WSOIC Package
MOQ : 1 |

MAX211EEWI+ Présentation

The Maxim Integrated MAX211EEWI+ is a 4/5 RS-232 transceiver with four drivers and five receivers, 15kV ESD protection, and single-supply operation from 4.5V to 5.5V. The device is offered in a 28-pin wide small-outline SOIC package and includes an integrated charge pump for single 5V operation.

An RS-232 transceiver is an interface IC that converts logic-level signals to and from RS-232 line levels. It belongs to the transceiver class, interface IC hierarchy, and broader semiconductor category. The MAX211EEWI+ combines four driver channels with five receiver channels, allowing multiple serial ports or asymmetric communication paths to share one package while providing a standardized physical interface for data transmission.

Key features include 15kV ESD protection, TTL-compatible tri-state driver operation, and operation from a 4.5V to 5.5V supply. The integrated charge pump eliminates the need for a separate external charge-pump supply arrangement for standard single-supply RS-232 operation. Its four-driver and five-receiver organization also provides receiver headroom when a system requires more receive channels than transmit channels.

The E suffix identifies the electrically enhanced device family, while the wider temperature capability associated with the EWI+ ordering code is -40°C to +85°C. The MAX211 family is also offered in 28-pin wide SO and SSOP configurations, but the target ordering code uses the 28-pin wide SOIC package. Exact propagation delay, slew rate, receiver thresholds, and input capacitance should be confirmed against the manufacturer datasheet before finalizing a high-speed interface design.

Typical uses include industrial serial-port equipment, data acquisition systems, instrumentation, control panels, and embedded systems that connect TTL or CMOS logic to RS-232 equipment. The five-receiver, four-driver arrangement is particularly useful where more input channels are required than output channels. Integrating the charge pump also reduces external circuitry and simplifies single-rail implementation compared with charge-pump-free or externally assisted alternatives.

Designers should verify signal-level compatibility, grounding, connector selection, and cable length for the selected RS-232 standard. ESD protection is valuable at the connector interface, but external protection may still be needed for severe industrial surge environments. Keep ground and signal routing controlled, place the charge-pump capacitors close to their specified pins, and avoid using TTL outputs without first confirming the required driver-enable and tri-state behavior.

This page combines the Maxim family specifications, verified distributor listings, pin-compatible family alternatives, and application-focused engineering guidance to support component selection and PCB design planning.

Alternatives de remplacement direct pour MAX211EEWI+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX211EEWI+ (même facteur de forme et même empreinte) — différant par Package, Receiver Count, Driver Count, Supply Voltage.

Maxim Integrated
Package: 28-SOIC (WSOIC)
Receiver Count: 5 receivers
Supply Voltage: 5V
Comparer avec MAX211EEWI+ →
Analog Devices
Package: 28-pin wide SOIC
Receiver Count: 5
Driver Count: 4
Comparer avec MAX211EEWI+ →

MAX211ECWI+

✅ Remplacement direct
Maxim Integrated
📦 28-SOIC
RS-232 transceiver · RS-232 and CMOS · 5V · 4 drivers · 5 receivers · RS-232 and V.28 · ±15kV · 4 x 0.1uF

Contactez-nous pour le prix

Voir la fiche technique →

MAX211EWI+

✅ Remplacement direct
Analog Devices
📦 28-SOIC
RS-232 and V.28 transceiver · +5 V · 4 · 5 · In excess of 120 kbps · ±5 V EIA/TIA-232E · Integrated · 4 × 0.1 µF

Contactez-nous pour le prix

Voir la fiche technique →

MAX213EEWI

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-SOIC
Same 28-pin wide-SOIC family and 4/5 transceiver channel count; shutdown-control behavior differs, so the complete pin function table must be checked.

📋 Alternative de référence (hors catalogue)

MAX241EEWI

✅ Remplacement direct
📦 28-SOIC
Same 28-pin wide-SOIC family; channel-control and shutdown functions differ from the MAX211EEWI+, requiring pin-level verification before substitution.

📋 Alternative de référence (hors catalogue)

MAX211EEWI+ Spécifications

Transceiver Configuration 4 drivers / 5 receivers
Interface Standard RS-232
Supply Voltage Range 4.5V to 5.5V
Nominal Supply Voltage +5V
Driver Count 4 channels
Receiver Count 5 channels
ESD Protection ±15kV
Charge Pump Integrated
Driver Output Type TTL tri-state
Boîtier 28-pin WSOIC
Package Family Wide small-outline IC
Type de montage Surface mount
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Operating Supply Range 4.5V to 5.5V

Guide de configuration des broches du MAX211EEWI+ wide small-outline ic

Configuration des broches du MAX211EEWI+ (boîtier wide small-outline ic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier wide small-outline ic pour le MAX211EEWI+

Aucune donnée de brochage détaillée disponible pour MAX211EEWI+.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX211EEWI+ convient pour 6 applications: Industrial RS-232 Data Acquisition, Instrumentation and Test Equipment, Embedded Serial Communication Controller, Serial Control Panel, Point-of-Sale and Peripheral Interface, Industrial Communication Gateway.

🏭

Industrial RS-232 Data Acquisition

The MAX211EEWI+ fits industrial data-acquisition equipment that must translate between TTL or CMOS controller logic and RS-232 instruments. Its 4.5V to 5.5V operating range supports conventional 5V systems, while the integrated charge pump simplifies single-rail implementation. Four driver and five receiver channels provide asymmetric connectivity for controlling one or more peripherals and collecting status data. The -40°C to +85°C rating is useful in factory environments, and ±15kV ESD protection improves interface resilience, although connector-level surge protection may still be required.

🔧

Instrumentation and Test Equipment

The MAX211EEWI+ is appropriate for laboratory and field instrumentation that uses legacy RS-232 links for control, logging, or service access. Four driver outputs can connect multiple enabled receivers, while five receiver channels support multiple incoming data sources. Its integrated charge pump reduces the number of external support components compared with designs that provide a separate boosted supply. The wide-SOIC package remains compatible with conventional through-hole-style PCB assembly practices, and the -40°C to +85°C range supports temperature-controlled industrial test systems.

🖥️

Embedded Serial Communication Controller

The MAX211EEWI+ can serve as the physical-layer complement to an embedded UART or microprocessor in systems that still require RS-232 connectivity. The four-driver and five-receiver organization allows several serial links to share one interface IC, reducing board area relative to separate single-channel transceivers. TTL tri-state outputs support shared-bus arrangements when the host firmware controls driver enable timing correctly. Single-supply operation from 4.5V to 5.5V and integrated charge-pump circuitry simplify connections to 5V embedded systems, though modern designs often prefer USB or differential interfaces when the physical standard permits.

📱

Serial Control Panel

A MAX211EEWI+ is useful in a human-machine-interface control panel that must retain a wired RS-232 command port. The five receiver channels can accept data from multiple panel modules, while four driver channels support communication with up to four enabled receiving nodes. The integrated charge pump allows operation from one 5V rail, making the device suitable for space-constrained electronics with limited power distribution. ESD protection is valuable around touchable or externally accessible equipment, but the final design should still use a suitable connector, chassis grounding, and protection network for its installation environment.

💳

Point-of-Sale and Peripheral Interface

The MAX211EEWI+ can bridge a controller to RS-232 peripherals such as scanners, printers, or service terminals in legacy point-of-sale equipment. Four driver channels accommodate several enabled peripheral inputs, and five receiver channels can collect acknowledgements or status signals. The 4.5V to 5.5V supply range aligns with many embedded 5V systems, while the integrated charge pump avoids a separate negative-voltage generation circuit. Because exposed RS-232 ports are susceptible to both ESD and larger surge transients, the board design should combine the device's internal protection with appropriately rated external protection and robust signal grounding.

🌐

Industrial Communication Gateway

The MAX211EEWI+ is suitable for a communication gateway that bridges a legacy RS-232 device to a modern embedded controller. Its four drivers and five receivers support several physical channels while preserving a compact 28-pin wide-SOIC footprint. The integrated charge pump permits straightforward 5V-only implementation, and the -40°C to +85°C rating supports deployment in unheated industrial enclosures. Signal-integrity planning should account for unequal driver and receiver counts, the tri-state control state of unused outputs, and the potential for ground-potential differences between equipment connected through long RS-232 cables.

Récapitulatif des produits recommandés

MAX211E Same Maxim RS-232 transceiver family Utilisé dans : Industrial RS-232 Data Acquisition, Embedded Serial Communication Controller, Point-of-Sale and Peripheral Interface MAX213E Same Maxim 4/5 RS-232 transceiver family Utilisé dans : Industrial RS-232 Data Acquisition, Instrumentation and Test Equipment, Serial Control Panel, Point-of-Sale and Peripheral Interface, Industrial Communication Gateway MAX241E Related Maxim RS-232 transceiver family Utilisé dans : Instrumentation and Test Equipment, Embedded Serial Communication Controller, Serial Control Panel, Industrial Communication Gateway
What is the MAX211EEWI+?
The MAX211EEWI+ is a Maxim Integrated 4/5 RS-232 transceiver containing four drivers and five receivers. It operates from a 4.5V to 5.5V supply, provides ±15kV ESD protection, and uses a 28-pin WSOIC package. According to the Maxim manufacturer datasheet, an integrated charge pump supports single 5V RS-232 operation.
What are the key specifications of MAX211EEWI+ that engineers should know?
The principal MAX211EEWI+ specifications are four driver channels, five receiver channels, a 4.5V to 5.5V operating supply, ±15kV ESD protection, integrated charge-pump circuitry, and a 28-pin WSOIC package. The MAX211 manufacturer datasheet also identifies the family as an RS-232 and V.28 communication device designed for harsh environments.
Where can I download the MAX211EEWI+ datasheet PDF?
The MAX211EEWI+ datasheet can be obtained through the Maxim product page linked on this page or through the MAX211EEWI datasheet listing in the product resources. The manufacturer datasheet is the authoritative source for pin assignments, electrical characteristics, recommended charge-pump capacitors, and RS-232 timing limits.
Where can I find the MAX211EEWI+ pinout?
The MAX211EEWI+ pinout is defined in the pin-description and package-drawing sections of the Maxim manufacturer datasheet. Use that table when assigning the 28 wide-SOIC pins, especially the supply, ground, receiver-output, driver-input, driver-enable, charge-pump capacitor, and receiver-input connections.
Where to buy MAX211EEWI+ online?
Use the Request a Quote form on this page to request the MAX211EEWI+, current availability, and order details. The form is the appropriate route for checking exact suffix, quantity, delivery, and shipment requirements without relying on a potentially stale listing.
What is the price of MAX211EEWI+?
The current MAX211EEWI+ commercial terms are displayed through the Request a Quote form on this page. Submit the required quantity, package, and delivery information to obtain a current quotation. Pricing should be confirmed at order time because component pricing and availability can change with market conditions.
What is the lead time for MAX211EEWI+?
Current lead time and minimum order quantity for the MAX211EEWI+ should be requested through the Request a Quote form on this page. Include the required quantity and any date-sensitive production schedule so the supplier can confirm the most relevant manufacturing and delivery information.
Is MAX211EEWI+ in stock?
Stock status for the MAX211EEWI+ should be confirmed with the Request a Quote form on this page. Provide the required quantity and target delivery date, and state whether unopened production quantities or scheduled deliveries are acceptable for the design.
What is the best drop-in replacement for MAX211EEWI+?
The MAX211EWI is the closest identified same-family alternative, sharing the 28-pin wide-SOIC format and Maxim RS-232 transceiver function, but it is listed as obsolete and no longer manufactured. A MAX211ECWI+ can also use the same 28-pin wide-SOIC footprint, although its temperature range is limited to 0°C to +70°C versus -40°C to +85°C for the target.
Can MAX211ECWI+ replace MAX211EEWI+?
Yes, MAX211ECWI+ is a footprint-compatible alternative for designs that remain within 0°C to +70°C. The MAX211ECWI+ has the same 28-pin wide-SOIC package and 4/5 transceiver organization, but its minimum operating temperature is 10°C higher than the -40°C minimum of the MAX211EEWI+.
MAX211EEWI+ vs MAX241EEWI - which is better?
The MAX211EEWI+ is preferable when the design specifically requires four driver and five receiver channels in a 28-pin wide-SOIC package. The MAX241EEWI appears in the MAX family cross-reference results, but its channel and shutdown-function differences must be checked in its own datasheet before treating it as an interchangeable substitute.
What is the difference between MAX211EEWI+ and MAX213EEWI?
The MAX211EEWI+ and MAX213EEWI belong to the same Maxim MAX211/MAX213 family and use the 28-pin wide-SO package. Their control features differ, so the manufacturer datasheets should be compared for shutdown behavior, enable logic, and channel implementation. Do not rely on package identity alone when shutdown timing is safety- or system-critical.
When should I choose MAX211EEWI+ over MAX211ECWI+?
Choose MAX211EEWI+ when the product must operate across the full -40°C to +85°C industrial temperature range. Choose MAX211ECWI+ only when the application remains between 0°C and +70°C and cost or sourcing considerations outweigh the target device's broader cold-temperature capability.
Is MAX211EEWI+ suitable for industrial serial-port equipment?
The MAX211EEWI+ is suitable for many industrial serial-port designs because it operates from 4.5V to 5.5V, includes ±15kV ESD protection, and is rated from -40°C to +85°C. Industrial suitability still depends on the complete enclosure, connector protection, grounding, surge exposure, and isolation requirements of the finished equipment.
What can replace MAX211EEWI+?
Identified replacements include the same-brand MAX211EWI, MAX211ECWI+, MAX213EEWI, and MAX241EEWI family devices where their respective package and control functions are confirmed compatible. The obsolete MAX211EWI is not a practical new-design choice, while the MAX211ECWI+ has a narrower 0°C to +70°C temperature range.
Is MAX211EEWI+ the same as MAX211IDWR?
No exact equivalence should be assumed between MAX211EEWI+ and MAX211IDWR merely because both are 28-pin RS-232 transceivers. Compare the Maxim manufacturer datasheets for electrical ratings, temperature range, shutdown behavior, package dimensions, and pin functions before selecting one as a replacement.
Does MAX211EEWI+ need external charge-pump capacitors?
The MAX211EEWI+ includes integrated charge-pump circuitry for single-supply operation, but the manufacturer datasheet still specifies the required external capacitors and their connection. Install the recommended capacitance values close to the charge-pump pins, observing polarity and ESR requirements.
What is the Maxim equivalent for MAX211EEWI+?
The Maxim MAX211EWI is the directly identified same-family equivalent with the same 28-pin wide-SOIC form, but it is listed as obsolete and no longer manufactured. For an active replacement strategy, compare MAX211ECWI+, MAX213EEWI, and MAX241EEWI against the required temperature range, channel functions, shutdown behavior, and exact pinout.

Données de référence d'ingénierie pour MAX211EEWI+ — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX211EEWI+ when the design needs a 28-pin wide-SOIC RS-232 transceiver with four drivers, five receivers, a 4.5V to 5.5V supply, integrated charge-pump circuitry, and operation from -40°C to +85°C. Choose MAX211ECWI+ for a cost-sensitive design that remains between 0°C and +70°C and uses the same broad package and transceiver organization. MAX211EWI offers close family-level similarity but is obsolete and no longer manufactured, making it unsuitable as the default choice for a new design. MAX213EEWI should be considered when its shutdown behavior matches the system, while MAX241EEWI requires a careful review of channel and control functions. No cross-brand drop-in replacement was confirmed, so any competitor-based redesign must undergo independent electrical, timing, and pin-level qualification.

Comparaison avec les alternatives

Paramètre Ce produit MAX211ECWI+ MAX211EWI MAX213EEWI MAX241EEWI
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 28-SOIC 28-SOIC - same 28-SOIC - same 28-SOIC - same 28-SOIC - same

Principaux différenciateurs

  • Broader industrial temperature coverage (vs MAX211ECWI+)
  • Four-driver and five-receiver configuration (vs MAX241EEWI)
  • Single 5V rail with integrated charge pump (vs MAX213EEWI)

Notes de conception

Place the charge-pump capacitors and the required input and output bypass capacitors directly beside their associated pins. Keep the charge-pump loop compact because long PCB traces can increase radiated noise and reduce margin on the RS-232 driver outputs. Use the manufacturer's recommended capacitance and ESR values, and route connector-side protection components close to the external pins rather than back toward the transceiver.

Do not enable multiple driver outputs onto the same RS-232 node unless the system intentionally supports that connection and the outputs are designed for it. TTL tri-state control must leave unused drivers in a high-impedance state. Confirm the receiver enable or shutdown polarity in the manufacturer pin table because a wrong control-state interpretation can prevent communication or create excessive bus contention.

The ±15kV ESD rating is not equivalent to unlimited surge withstand. For cables leaving an enclosure, combine the internal protection with connector placement, chassis or signal-ground strategy, and external surge protection appropriate to the installation. Keep long RS-232 traces away from clocks, switching inductors, and high-current return paths to reduce common-mode noise and false receive transitions.

Use a solid low-impedance ground plane for the transceiver and provide an unobstructed return path beneath or near the interface traces. Avoid splitting the ground plane beneath the wide-SOIC footprint, and avoid routing high-speed digital signals directly beneath charge-pump nodes. Maintain practical separation between outgoing and incoming RS-232 channels when their ground references or cable routes differ.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the target ordering code. The manufacturer family is described as operating in harsh environments, but this does not establish a formal compliance qualification.

Données vérifiées le : 2026-11-09 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX211EEWI+ datasheet MAX211EEWI+ pinout MAX211EEWI+ datasheet pdf MAX211EEWI+ equivalent MAX211EEWI+ replacement MAX211EEWI+ cross reference MAX211EEWI+ vs MAX211ECWI+ Maxim Integrated MAX211EEWI+ MAX211EEWI+ 4.5V 5.5V MAX211EEWI+ 15kV ESD MAX211EEWI+ 28-SOIC MAX211EEWI+ industrial RS-232 MAX211EEWI+ price MAX211EEWI+ stock

Composants & termes associés

Maxim Integrated MAX211EEWI+ MAX211ECWI+ MAX211EWI MAX213EEWI MAX241EEWI RS-232 transceiver RS-232 V.28 interface IC transceiver semiconductor TTL tri-state driver integrated charge pump 15kV ESD protection 4.5V to 5.5V supply 28-pin WSOIC wide small-outline IC surface-mount package industrial data acquisition instrumentation serial communication RS-232 driver RS-232 receiver
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ