MAX232BEASE+ - Dual RS-232 Transceiver | Analog Devices
Référence : MAX232BEASE+ ✓ ActifMAX232BEASE+ Présentation
Alternatives de remplacement direct pour MAX232BEASE+ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MAX232BEASE+ (même facteur de forme et même empreinte) — différant par Interface Standard, Product Type, Transceiver Configuration, Package, Maximum Data Rate.
MAX232AESE+
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MAX232EESE+
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MAX232EWE+
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MAX232AEWE+
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MAX232CASE+
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →MAX232BEASE+ Spécifications
| Transceiver Configuration | 2 driver / 2 receiver, full RS-232 |
| Interface Standard | TIA/EIA-232-F and ITU V.28 |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Boîtier | 16-SOIC |
| Type de montage | Surface mount |
| On-Chip Charge Pumps | Yes |
| Automotive Qualification | Not applicable |
| Operating Voltage Reference | Single-supply RS-232 interface with charge-pump-generated bipolar levels |
Guide de configuration des broches du MAX232BEASE+ 16-soic
Configuration des broches du MAX232BEASE+ (boîtier 16-soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour MAX232BEASE+.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MAX232BEASE+ convient pour 6 applications: Industrial Serial Controllers, Test and Measurement Equipment, Data Acquisition Systems, Service and Configuration Ports, Embedded Instrument Control, Legacy Peripheral Connectivity.
Industrial Serial Controllers
The MAX232BEASE+ fits industrial control boards that need to convert a microcontroller UART into a full RS-232 port. Its two drivers and two receivers support the transmit and receive paths of a conventional RS-232 link, while the integrated charge pumps avoid a separate negative rail. Place the device close to the connector and route the differential-free but unidirectional RS-232 signals away from sensitive analog circuitry. The 16-SOIC footprint keeps the interface compact, and the B suffix identifies an industrial-oriented option within the MAX232 family.
Recommandé
Test and Measurement Equipment
The MAX232BEASE+ is useful for legacy RS-232 test instruments, service ports, and programmable fixtures where a modern USB-only interface is not available. The single-supply charge-pump approach simplifies the power architecture compared with a discrete bipolar driver arrangement. The two driver outputs can connect to the transmit inputs of external equipment, and the two receivers can read returned status or control lines. Verify the connected equipment's RS-232 voltage levels and grounding requirements before enabling the interface.
Recommandé
Data Acquisition Systems
The MAX232BEASE+ can provide a legacy RS-232 control and data link for data-acquisition systems that must communicate with older laboratory equipment or industrial peripherals. The dual receiver channels allow the system to monitor return data and handshake signals, while the dual drivers support outgoing commands. Because RS-232 is a single-ended interface, keep the connector and cable away from high-current switching nodes and use the recommended charge-pump capacitors with short PCB traces to maintain driver performance.
Recommandé
Service and Configuration Ports
The MAX232BEASE+ is appropriate for embedded systems that retain a service connector for configuration, firmware update, or diagnostic access. Its 16-SOIC package allows the interface to be placed near a chassis-mounted DB9 or equivalent connector without creating long internal traces. The integrated charge pumps reduce the number of external power rails required by the interface, but field-accessible ports should still include appropriate transient and ESD protection. Confirm the baud-rate, driver-load, and receiver-threshold requirements of the connected host.
Recommandé
Embedded Instrument Control
The MAX232BEASE+ can serve as the host-side interface in embedded instruments that communicate with a legacy computer, printer, scanner, or controller. The two transmit drivers and two receive channels match the typical full-duplex RS-232 port arrangement, while the single-supply operation is helpful in compact embedded products. Place the interface on the side of the board facing the connector, provide a defined ground reference, and use a protection strategy suitable for the installation environment and cable length.
Recommandé
Legacy Peripheral Connectivity
The MAX232BEASE+ is a practical choice when a modern controller must retain compatibility with legacy RS-232 peripherals, including older printers, programmers, meters, and specialty equipment. Its two driver and two receiver channels cover the standard bidirectional signal arrangement without requiring multiple interface packages. The MAX232 family supports the TIA/EIA-232-F and V.28 signaling framework, but cable length, ground noise, and protection remain system-level concerns that should be validated with the complete peripheral and cable set.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MAX232BEASE+ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MAX232AESE+ | MAX232EESE+ | MAX232EWE+ | MAX232AEWE+ | MAX232CASE+ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Transceiver Function | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver | Dual RS-232 driver/receiver |
| Number of Drivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 | 2 |
| Charge-Pump Architecture | On-chip charge pumps | On-chip charge pumps | On-chip charge pumps | On-chip charge pumps | On-chip charge pumps | On-chip charge pumps |
| Interface Standard | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 family interface | TIA/EIA-232-F and ITU V.28 family interface | TIA/EIA-232-F and ITU V.28 family interface | TIA/EIA-232-F and ITU V.28 family interface | TIA/EIA-232-F and ITU V.28 family interface |
Principaux différenciateurs
- Single-package full RS-232 port implementation (vs MAX232AESE+)
- Compact SOIC interface for embedded equipment (vs MAX232EESE+)
- Integrated single-supply charge-pump design (vs MAX232EWE+)
- Related MAX232-family sourcing options (vs MAX232AEWE+)
Notes de conception
Follow the manufacturer charge-pump capacitor placement closely. Keep the external capacitors adjacent to their designated pins and avoid routing the high-current charge-pump loops beneath sensitive analog or communication traces. Place the transceiver near the RS-232 connector, and provide a low-impedance ground return path between the IC and the connector.
Decouple the IC supply with the recommended local bypass capacitors and confirm the supply-voltage range, driver-load current, and charge-pump requirements in the MAX232A datasheet. The MAX232 family generates bipolar RS-232 levels internally, but the external supply still needs sufficient decoupling and current margin for the load and charge-pump operation.
Do not assume that a related MAX232 ordering code is automatically interchangeable. Verify the exact pin table, temperature suffix, package, and external capacitor requirements before releasing a substitution. Also add appropriate transient or ESD protection for a field-connected cable because the transceiver logic is not a substitute for connector-level surge protection.
Route RS-232 driver and receiver nets away from clocks, switching regulators, and high-speed digital edges. Although RS-232 is single-ended, the receiver can respond to ground-bounce and coupling noise on long cables. Use the shortest practical connection to the connector and keep the interface ground reference close to the signal reference.
Informations de conformité
The verified manufacturer product-page description confirms the MAX232 family and its RS-232 application, but no explicit compliance statement was included. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact ordering code with the manufacturer or distributor documentation.