Analog Devices

MAX232BEASE+ - Dual RS-232 Transceiver | Analog Devices

MPN: MAX232BEASE+ ✓ सक्रिय
Single-supply RS-232 interface with charge-pump-generated bipolar levels Vdss 16-SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX232BEASE+ अवलोकन

The Analog Devices MAX232BEASE+ is a dual, full RS-232 line driver and receiver designed for bidirectional serial communication using TIA/EIA-232-F and V.28 interfaces. It provides two driver channels and two receiver channels in a 16-SOIC package, allowing a single device to support one complete RS-232 port. The MAX232 family uses on-chip charge-pump circuitry to generate the positive and negative voltage swings required by RS-232 from a single supply, avoiding the need for a separate negative power rail. The interface is intended for equipment where logic-level signals must be translated into the voltage range and signaling characteristics required by RS-232 equipment. The B suffix identifies the industrial temperature option, while the E suffix denotes the 16-SOIC package configuration and the A suffix indicates the MAX232A family configuration. The integrated charge pumps and compact surface-mount footprint make the MAX232BEASE+ suitable for industrial control equipment, instrumentation, data acquisition systems, service interfaces, and legacy peripheral connectivity. The MAX232 family is designed to support standard RS-232 data rates while providing receiver and driver functions in one package. In practice, designers should still account for the electrical limits of the RS-232 standard, including cable length, ground reference, protection, and the possibility of connecting to equipment that uses non-standard voltage levels. The MAX232BEASE+ is a practical choice when a compact, single-supply RS-232 interface is required and the system does not need the higher drive strength or extended features found in newer multi-driver interface families.

के लिए ड्रॉप-इन विकल्प MAX232BEASE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX232BEASE+ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Interface Standard, Product Type, Transceiver Configuration, Package, Maximum Data Rate.

Maxim Integrated
Interface Standard: EIA/TIA-232E, V.28, V.24
Product Type: RS-232 dual transceiver
Transceiver Configuration: 2/2 full-duplex RS-232
इसके साथ तुलना करें MAX232BEASE+ →
Analog Devices
Interface Standard: RS-232
Transceiver Configuration: 2/2 full-duplex
Package: 16-pin SOIC
इसके साथ तुलना करें MAX232BEASE+ →
Maxim Integrated
Interface Standard: EIA/TIA-232E, V.28, and V.24
Product Type: RS-232 transceiver
Package: 16-pin SOIC
इसके साथ तुलना करें MAX232BEASE+ →
Analog Devices
Interface Standard: EIA/TIA-232E and CCITT V.28
Product Type: Dual RS-232 transceiver with integrated charge pump
Package: 16-pin narrow SOIC
इसके साथ तुलना करें MAX232BEASE+ →
Analog Devices
Interface Standard: RS-232
Product Type: Dual RS-232 transceiver
Transceiver Configuration: 2 transmitter and 2 receiver channels
इसके साथ तुलना करें MAX232BEASE+ →

MAX232AESE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Maxim Integrated
📦 SOIC-16
RS-232 dual transceiver · 2 drivers · 2 receivers · 4.5 V to 5.5 V · +5 V · EIA/TIA-232E, V.28, V.24 · 2/2 full-duplex RS-232 · Enhanced CMOS

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX232EESE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 SOIC-16
Dual RS-232 transceiver with integrated charge pump · 2 · 2 · +5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · 15 kV · 16-pin narrow SOIC

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX232EWE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 SOIC-16
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX232AEWE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 SOIC-16
2 drivers · 2 receivers · 2/2 full-duplex · RS-232 · +5 V · 200 kb/s · 16-pin SOIC · 7.50 mm

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX232CASE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Maxim Integrated
📦 SOIC-16
RS-232 transceiver · 2 · 2 · Full duplex · EIA/TIA-232E, V.28, and V.24 · 4.5 V to 5.5 V · 5 V · 120 kbps

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX232BEASE+ विशेषताएं

Transceiver Configuration 2 driver / 2 receiver, full RS-232
Interface Standard TIA/EIA-232-F and ITU V.28
Number of Drivers 2
Number of Receivers 2
पैकेज 16-SOIC
माउंटिंग प्रकार Surface mount
On-Chip Charge Pumps Yes
Automotive Qualification Not applicable
Operating Voltage Reference Single-supply RS-232 interface with charge-pump-generated bipolar levels

MAX232BEASE+ 16-soic पिन कॉन्फ़िगरेशन गाइड

MAX232BEASE+ (16-soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX232BEASE+ के लिए 16-soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX232BEASE+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX232BEASE+ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Serial Controllers, Test and Measurement Equipment, Data Acquisition Systems, Service and Configuration Ports, Embedded Instrument Control, Legacy Peripheral Connectivity.

🏭

Industrial Serial Controllers

The MAX232BEASE+ fits industrial control boards that need to convert a microcontroller UART into a full RS-232 port. Its two drivers and two receivers support the transmit and receive paths of a conventional RS-232 link, while the integrated charge pumps avoid a separate negative rail. Place the device close to the connector and route the differential-free but unidirectional RS-232 signals away from sensitive analog circuitry. The 16-SOIC footprint keeps the interface compact, and the B suffix identifies an industrial-oriented option within the MAX232 family.

🖥️

Test and Measurement Equipment

The MAX232BEASE+ is useful for legacy RS-232 test instruments, service ports, and programmable fixtures where a modern USB-only interface is not available. The single-supply charge-pump approach simplifies the power architecture compared with a discrete bipolar driver arrangement. The two driver outputs can connect to the transmit inputs of external equipment, and the two receivers can read returned status or control lines. Verify the connected equipment's RS-232 voltage levels and grounding requirements before enabling the interface.

📡

Data Acquisition Systems

The MAX232BEASE+ can provide a legacy RS-232 control and data link for data-acquisition systems that must communicate with older laboratory equipment or industrial peripherals. The dual receiver channels allow the system to monitor return data and handshake signals, while the dual drivers support outgoing commands. Because RS-232 is a single-ended interface, keep the connector and cable away from high-current switching nodes and use the recommended charge-pump capacitors with short PCB traces to maintain driver performance.

🔧

Service and Configuration Ports

The MAX232BEASE+ is appropriate for embedded systems that retain a service connector for configuration, firmware update, or diagnostic access. Its 16-SOIC package allows the interface to be placed near a chassis-mounted DB9 or equivalent connector without creating long internal traces. The integrated charge pumps reduce the number of external power rails required by the interface, but field-accessible ports should still include appropriate transient and ESD protection. Confirm the baud-rate, driver-load, and receiver-threshold requirements of the connected host.

🖨️

Embedded Instrument Control

The MAX232BEASE+ can serve as the host-side interface in embedded instruments that communicate with a legacy computer, printer, scanner, or controller. The two transmit drivers and two receive channels match the typical full-duplex RS-232 port arrangement, while the single-supply operation is helpful in compact embedded products. Place the interface on the side of the board facing the connector, provide a defined ground reference, and use a protection strategy suitable for the installation environment and cable length.

🔌

Legacy Peripheral Connectivity

The MAX232BEASE+ is a practical choice when a modern controller must retain compatibility with legacy RS-232 peripherals, including older printers, programmers, meters, and specialty equipment. Its two driver and two receiver channels cover the standard bidirectional signal arrangement without requiring multiple interface packages. The MAX232 family supports the TIA/EIA-232-F and V.28 signaling framework, but cable length, ground noise, and protection remain system-level concerns that should be validated with the complete peripheral and cable set.

What is the MAX232BEASE+ used for?
The MAX232BEASE+ is a dual RS-232 transceiver used to connect a logic-level UART or microcontroller to a full RS-232 port. It provides two driver outputs and two receiver inputs in one 16-SOIC package. The on-chip charge pumps generate the positive and negative voltage levels required by RS-232 from a single supply, making it useful for industrial controllers, test equipment, and legacy serial peripherals.
How many RS-232 channels does the MAX232BEASE+ provide?
The MAX232BEASE+ provides two driver channels and two receiver channels, forming a full-duplex RS-232 interface. This is sufficient for one typical RS-232 port, where the UART transmit line drives one receiver and the remote transmit line returns into one receiver. The device is not a multi-port RS-232 hub and does not provide the larger channel count of MAX3232-family devices.
Does the MAX232BEASE+ require a negative supply voltage?
No. The MAX232BEASE+ includes on-chip charge-pump circuitry that generates the negative and positive voltage levels used by the RS-232 drivers from a single supply. The MAX232 family was specifically designed for applications where a separate negative supply is unavailable. External charge-pump capacitors are still required according to the manufacturer application guidance, so the board layout must follow the recommended capacitor placement.
Is the MAX232BEASE+ pin-compatible with the MAX232AESE+?
The MAX232BEASE+ and MAX232AESE+ are both listed as 16-SOIC MAX232-family interface devices and are commonly treated as closely related alternatives. Before replacing one with the other, verify the exact ordering code, temperature range, and capacitor configuration in the manufacturer datasheet. The two parts should not be assumed interchangeable without checking the pin description table and the electrical requirements of the original design.
What is the difference between MAX232BEASE+ and MAX232EESE+?
The MAX232BEASE+ and MAX232EESE+ are both MAX232-family 16-SOIC RS-232 transceivers, but their ordering suffixes identify different device variants and operating conditions. The exact electrical, temperature, and qualification differences should be read from the corresponding manufacturer datasheet and ordering information. For a drop-in substitution, confirm that the pin arrangement, supply requirements, charge-pump capacitors, and temperature rating match the original circuit.
Where can I download the MAX232BEASE+ datasheet?
The MAX232BEASE+ datasheet and product information are available through the Analog Devices MAX232A product page. The manufacturer documentation describes the MAX220 through MAX249 family, including the MAX232 variants, package options, and operating-temperature selections. Use the pin-description table, electrical characteristics, and recommended application circuit from the manufacturer datasheet before finalizing PCB routing or selecting external capacitors.
Where can I find the MAX232BEASE+ pinout?
The MAX232BEASE+ pinout is shown in the MAX232A family datasheet, where the 16-SOIC pin configuration identifies the driver inputs, driver outputs, receiver inputs, receiver outputs, supply pins, ground, and charge-pump capacitor connections. The package diagram should be matched to the exact ordering code, because related MAX232 variants can use different package suffixes and temperature options.
When should I choose the MAX232BEASE+ over a MAX3232 device?
Choose the MAX232BEASE+ when the design needs only one RS-232 port with two drivers and two receivers, and when its documented voltage, data-rate, and temperature characteristics meet the application requirements. A MAX3232 device is preferable when several RS-232 ports are required or when a higher-channel-count, modern family option provides better system integration. The decision should also consider availability, qualification status, and the exact interface requirements of the connected equipment.
Can the MAX232BEASE+ be used in industrial equipment?
The MAX232BEASE+ is identified by the B suffix as an industrial-grade variant of the MAX232 family. It is appropriate for industrial control and instrumentation designs when the operating temperature range, electrical ratings, and qualification requirements are confirmed against the manufacturer datasheet. The device should still be paired with appropriate RS-232 cable protection, grounding, and transient-suppression components for field-connected ports.
What external capacitors are required for the MAX232BEASE+?
The MAX232BEASE+ requires external charge-pump capacitors connected to the designated capacitor pins, together with the normal bypass and interface capacitors shown in the manufacturer application circuit. Use the capacitor values and tolerance specified in the datasheet rather than generic substitutions. Place these components close to the relevant pins and follow the recommended layout to limit switching-current loops and maintain stable driver outputs.
How do I request a quote for MAX232BEASE+?
Use the Request a Quote form on this page to request current commercial terms, stock status, lead time, and delivery options for the MAX232BEASE+. The form is the appropriate channel for volume pricing and schedule confirmation, and it allows the exact manufacturer part number and package configuration to be included in the request.
What is the lead time for MAX232BEASE+?
The current lead time for the MAX232BEASE+ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, inventory position, and the selected shipping method. Include the required quantity, target delivery date, and your preferred shipping terms when submitting the request.
Is the MAX232BEASE+ currently in stock?
Current inventory for the MAX232BEASE+ is best confirmed through the Request a Quote form on this page. Submit the exact MPN, quantity, and delivery requirements so the order team can check the latest available supply and provide an accurate availability response.
What are the key specifications of MAX232BEASE+ that engineers should know?
The key engineering facts are that the MAX232BEASE+ is a dual full-duplex RS-232 transceiver with two drivers and two receivers in a 16-SOIC surface-mount package. It uses integrated charge pumps to operate from a single supply, and it supports the TIA/EIA-232-F and ITU V.28 interface standards. Confirm the detailed voltage, data-rate, temperature, and capacitor requirements in the MAX232A datasheet.
What can replace the MAX232BEASE+?
Potential replacements include closely related MAX232-family 16-SOIC devices such as the MAX232AESE+ and MAX232EESE+, provided the exact pin arrangement, electrical ratings, temperature range, and charge-pump capacitor requirements are verified. A replacement should be treated as a drop-in candidate only after comparing the manufacturer datasheets and confirming that the existing PCB layout remains valid.
Is the MAX232BEASE+ the same as the MAX232AESE+?
The MAX232BEASE+ and MAX232AESE+ are closely related MAX232-family devices with the same 16-SOIC interface format, but they are not automatically identical in every ordering detail. The relevant differences are defined by the family variant, temperature grade, and suffix configuration. Verify the manufacturer ordering information and electrical characteristics before using one as a direct substitute.

के लिए इंजीनियरिंग संदर्भ डेटा MAX232BEASE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX232BEASE+ when a design needs one full-duplex RS-232 port with two drivers and two receivers in a 16-SOIC package and can operate from a single supply with external charge-pump capacitors. The MAX232AESE+, MAX232EESE+, MAX232EWE+, MAX232AEWE+, and MAX232CASE+ are useful second-source candidates when they meet the exact electrical and temperature requirements. Because the listed alternatives are closely related ordering variants, verify the pin description table, maximum data rate, supply range, temperature grade, and capacitor values before substituting one for another. If the design needs more than one RS-232 port, higher data rates, or a different package, consider a multi-channel MAX3232-family device instead of assuming that a MAX232 variant provides those features.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX232AESE+ MAX232EESE+ MAX232EWE+ MAX232AEWE+ MAX232CASE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Transceiver Function Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver Dual RS-232 driver/receiver
Number of Drivers 2 2 2 2 2 2
Number of Receivers 2 2 2 2 2 2
Charge-Pump Architecture On-chip charge pumps On-chip charge pumps On-chip charge pumps On-chip charge pumps On-chip charge pumps On-chip charge pumps
Interface Standard TIA/EIA-232-F and ITU V.28 TIA/EIA-232-F and ITU V.28 family interface TIA/EIA-232-F and ITU V.28 family interface TIA/EIA-232-F and ITU V.28 family interface TIA/EIA-232-F and ITU V.28 family interface TIA/EIA-232-F and ITU V.28 family interface

मुख्य विशेषताएँ

  • Single-package full RS-232 port implementation (बनामMAX232AESE+)
  • Compact SOIC interface for embedded equipment (बनामMAX232EESE+)
  • Integrated single-supply charge-pump design (बनामMAX232EWE+)
  • Related MAX232-family sourcing options (बनामMAX232AEWE+)

डिज़ाइन नोट्स

Follow the manufacturer charge-pump capacitor placement closely. Keep the external capacitors adjacent to their designated pins and avoid routing the high-current charge-pump loops beneath sensitive analog or communication traces. Place the transceiver near the RS-232 connector, and provide a low-impedance ground return path between the IC and the connector.

Decouple the IC supply with the recommended local bypass capacitors and confirm the supply-voltage range, driver-load current, and charge-pump requirements in the MAX232A datasheet. The MAX232 family generates bipolar RS-232 levels internally, but the external supply still needs sufficient decoupling and current margin for the load and charge-pump operation.

Do not assume that a related MAX232 ordering code is automatically interchangeable. Verify the exact pin table, temperature suffix, package, and external capacitor requirements before releasing a substitution. Also add appropriate transient or ESD protection for a field-connected cable because the transceiver logic is not a substitute for connector-level surge protection.

Route RS-232 driver and receiver nets away from clocks, switching regulators, and high-speed digital edges. Although RS-232 is single-ended, the receiver can respond to ground-bounce and coupling noise on long cables. Use the shortest practical connection to the connector and keep the interface ground reference close to the signal reference.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified manufacturer product-page description confirms the MAX232 family and its RS-232 application, but no explicit compliance statement was included. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact ordering code with the manufacturer or distributor documentation.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX232BEASE+ datasheet MAX232BEASE+ pinout MAX232BEASE+ datasheet pdf MAX232BEASE+ equivalent MAX232BEASE+ replacement MAX232BEASE+ cross reference MAX232BEASE+ price MAX232BEASE+ stock Analog Devices MAX232BEASE+ MAX232BEASE+ SOIC-16 RS-232 MAX232BEASE+ application circuit MAX232BEASE+ vs MAX232AESE+ 16-SOIC RS-232 transceiver single supply RS-232 transceiver

संबंधित कंपोनेंट्स और शब्द

Analog Devices MAX232BEASE+ MAX232AESE+ MAX232EESE+ MAX232EWE+ MAX232AEWE+ MAX232CASE+ RS-232 transceiver line driver line receiver full-duplex serial interface TIA/EIA-232-F ITU V.28 charge pump single-supply operation SOIC-16 surface mount UART DB9 serial connector industrial control data acquisition legacy peripheral ESD protection single-ended interface
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें