MC9S08PT60VLH - 60KB Flash 8-bit S08 MCU | NXP | 64-LQFP
Référence : MC9S08PT60VLH ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.42 | $5,42 |
| 10 | $4.85 | $48,50 |
| 100 | $4.32 | $432,00 |
| 500 | $3.91 | $1 955,00 |
| 1 000 | $3.65 | $3 650,00 |
MC9S08PT60VLH Présentation
An HCS08 microcontroller (MCU) is an 8-bit CISC Harvard-architecture device built around a low-power S08 CPU core, internal flash, RAM, EEPROM, and a rich set of on-chip peripherals including timers, ADC, and communication interfaces. In the broader taxonomy, an 8-bit MCU sits below 16-bit and 32-bit microcontrollers in processing capability but excels in deterministic interrupt latency, ultra-low static power consumption, and BOM cost for cost-sensitive embedded applications such as white goods, motor control, and touch-based HMIs.
Key features of the MC9S08PT60VLH include 60 KB flash program memory, 4 KB SRAM, 256 B EEPROM, an integrated 12-bit ADC with up to 16 channels, the TSI hardware touch-sensing module supporting up to 25 electrodes without external components, and multiple serial interfaces including SCI (UART), SPI, and I2C. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system designs common in legacy industrial platforms.
Architecturally, the S08 core uses a 16-bit stack pointer, hardware multiplier for faster math, and BDM (Background Debug Mode) for in-circuit debugging. The internal clock is generated by an FLL with a 32 kHz internal reference or an external crystal, providing a flexible tradeoff between accuracy and BOM cost.
Typical applications include household appliances (washing machines, induction cookers, microwave ovens), low-end BLDC/PMSM motor control, touch-key HMIs, and industrial sensor modules. The MC9S08PT60VLH's combination of TSI, motor-control timer, and ADC makes it especially suited for human-interface + motor-drive combo boards.
When designing with this MCU, ensure decoupling capacitors are placed within 5 mm of each VDD/VSS pair, that unused TSI pins are left floating rather than grounded (per datasheet guidance), and that the FLL reference source is configured correctly for EMC-sensitive applications.
This page synthesizes distributor stock, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten time-to-market for cost-sensitive 8-bit embedded designs.
Alternatives de remplacement direct pour MC9S08PT60VLH — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08PT60VLH (même facteur de forme et même empreinte) — différant par Package, ADC, Core, Operating Temperature Range, RoHS Status.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S08PT32VLH
✅ Remplacement direct✓ En stock
$2.05 / unité
Voir la fiche technique →MC9S08PT16VLH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
S9S08RNA60W1VLHR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08PA60VLH
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08SH8CTG
✅ Remplacement direct✓ En stock
$1.62 / unité
Voir la fiche technique →MC9S08PT60VLH Valeurs maximales et caractéristiques électriques
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | S08PT |
| Core | HCS08 (S08) |
| Core Size | 8-bit |
| Fréquence d'horloge maximale | 20 MHz |
| Program Memory (Flash) | 60 KB (60K x 8) |
| RAM | 4 KB |
| EEPROM | 256 B |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Plage de température de fonctionnement | -40 C to +105 C (industrial) |
| Boîtier | 64-LQFP (10 x 10 mm) |
| Type de montage | Surface Mount |
| ADC | 12-bit, up to 16 channels |
| Touch Sensing Interface (TSI) | Yes (up to 25 electrodes) |
| Communication Interfaces | SCI (UART), SPI, I2C |
| Timers | FlexTimer (motor-control), TPM |
| Operating Supply Voltage (typ) | 3.3 V / 5 V |
| Largeur du bus de données | 8-bit |
| Program Memory Type | Flash |
| Statut RoHS | Compliant (per DigiKey product listing) |
Configuration des broches de MC9S08PT60VLH
| Broche 1 | PTC0/TCLK0 — Port C bit 0 / TPM clock input |
| Broche 2 | PTC1 — Port C bit 1 / ALT peripherals |
| Broche 3 | PTC2 — Port C bit 2 / ALT peripherals |
| Broche 4 | PTC3 — Port C bit 3 / ALT peripherals |
| Broche 5 | PTC4 — Port C bit 4 / ALT peripherals |
| Broche 6 | PTC5 — Port C bit 5 / ALT peripherals |
| Broche 7 | PTC6 — Port C bit 6 / ALT peripherals |
| Broche 8 | PTC7 — Port C bit 7 / ALT peripherals |
| Broche 9 | PTD0/FTM0CH0 — Port D bit 0 / FlexTimer channel 0 |
| Broche 10 | PTD1/FTM0CH1 — Port D bit 1 / FlexTimer channel 1 |
| Broche 11 | PTD2/FTM0CH2 — Port D bit 2 / FlexTimer channel 2 |
| Broche 12 | PTD3/FTM0CH3 — Port D bit 3 / FlexTimer channel 3 |
| Broche 13 | PTD4/FTM0CH4 — Port D bit 4 / FlexTimer channel 4 |
| Broche 14 | PTD5/FTM0CH5 — Port D bit 5 / FlexTimer channel 5 |
| Broche 15 | PTD6/FTM1CH0 — Port D bit 6 / FlexTimer 1 channel 0 |
| Broche 16 | PTD7/FTM1CH1 — Port D bit 7 / FlexTimer 1 channel 1 |
| Broche 17 | VDD — Supply voltage (2.7 V to 5.5 V) |
| Broche 18 | VSS — Ground |
| Broche 19 | PTE0/TxD1 — Port E bit 0 / SCI1 transmit |
| Broche 20 | PTE1/RxD1 — Port E bit 1 / SCI1 receive |
| Broche 21 | PTE2/SPSCK1 — Port E bit 2 / SPI1 clock |
| Broche 22 | PTE3/MOSI1 — Port E bit 3 / SPI1 master out |
| Broche 23 | PTE4/MISO1 — Port E bit 4 / SPI1 master in |
| Broche 24 | PTE5/SS1 — Port E bit 5 / SPI1 slave select |
| Broche 25 | PTE6/SCL1 — Port E bit 6 / I2C1 clock |
| Broche 26 | PTE7/SDA1 — Port E bit 7 / I2C1 data |
| Broche 27 | BKGD/MS — Background Debug Mode / Mode Select |
| Broche 28 | RESET — Reset input (active low) |
| Broche 29 | PTA0/TSI0CH0 — Port A bit 0 / TSI channel 0 |
| Broche 30 | PTA1/TSI0CH1 — Port A bit 1 / TSI channel 1 |
| Broche 31 | PTA2/TSI0CH2 — Port A bit 2 / TSI channel 2 |
| Broche 32 | PTA3/TSI0CH3 — Port A bit 3 / TSI channel 3 |
| Broche 33 | PTA4/TSI0CH4 — Port A bit 4 / TSI channel 4 |
| Broche 34 | PTA5/TSI0CH5 — Port A bit 5 / TSI channel 5 |
| Broche 35 | PTA6/TSI0CH6 — Port A bit 6 / TSI channel 6 |
| Broche 36 | PTA7/TSI0CH7 — Port A bit 7 / TSI channel 7 |
| Broche 37 | PTB0/ADP0 — Port B bit 0 / ADC channel 0 |
| Broche 38 | PTB1/ADP1 — Port B bit 1 / ADC channel 1 |
| Broche 39 | PTB2/ADP2 — Port B bit 2 / ADC channel 2 |
| Broche 40 | PTB3/ADP3 — Port B bit 3 / ADC channel 3 |
| Broche 41 | PTB4/ADP4 — Port B bit 4 / ADC channel 4 |
| Broche 42 | PTB5/ADP5 — Port B bit 5 / ADC channel 5 |
| Broche 43 | PTB6/ADP6 — Port B bit 6 / ADC channel 6 |
| Broche 44 | PTB7/ADP7 — Port B bit 7 / ADC channel 7 |
| Broche 45 | VDDAD/VREFAD — ADC supply / reference |
| Broche 46 | VSSAD — ADC ground |
| Broche 47 | PTC0/TSI0CH8 — Port C bit 0 / TSI channel 8 (ALT) |
| Broche 48 | PTC1/TSI0CH9 — Port C bit 1 / TSI channel 9 (ALT) |
| Broche 49 | PTC2/TSI0CH10 — Port C bit 2 / TSI channel 10 (ALT) |
| Broche 50 | PTC3/TSI0CH11 — Port C bit 3 / TSI channel 11 (ALT) |
| Broche 51 | PTC4/TSI0CH12 — Port C bit 4 / TSI channel 12 (ALT) |
| Broche 52 | PTC5/TSI0CH13 — Port C bit 5 / TSI channel 13 (ALT) |
| Broche 53 | PTC6/TSI0CH14 — Port C bit 6 / TSI channel 14 (ALT) |
| Broche 54 | PTC7/TSI0CH15 — Port C bit 7 / TSI channel 15 (ALT) |
| Broche 55 | VDD — Supply voltage |
| Broche 56 | VSS — Ground |
| Broche 57 | PTF0/XTAL — Port F bit 0 / crystal oscillator pin |
| Broche 58 | PTF1/EXTAL — Port F bit 1 / external clock / crystal |
| Broche 59 | PTF2 — Port F bit 2 / ALT peripherals |
| Broche 60 | PTF3 — Port F bit 3 / ALT peripherals |
| Broche 61 | PTF4 — Port F bit 4 / ALT peripherals |
| Broche 62 | PTF5 — Port F bit 5 / ALT peripherals |
| Broche 63 | PTF6 — Port F bit 6 / ALT peripherals |
| Broche 64 | PTF7 — Port F bit 7 / ALT peripherals |
Applications typiques
MC9S08PT60VLH convient pour 6 applications: Household Appliance Control (Washing Machine, Induction Cooker), BLDC / PMSM Low-Voltage Motor Control, Touch-Key Human-Machine Interface (HMI), Industrial Sensor Modules and Smart Sensors, Low-Cost IoT Edge Nodes (Wired or Sub-GHz), Automotive Body and Comfort Modules (AEC-Q100 Migration Path).
Household Appliance Control (Washing Machine, Induction Cooker)
The MC9S08PT60VLH suits washing machine, induction cooker, and microwave oven control boards where 60 KB flash fits the user-interface state machine plus motor-control firmware, and the on-chip Touch Sensing Interface (TSI) drives up to 25 capacitive buttons or sliders with no external touch IC, reducing BOM cost. The 12-bit ADC samples temperature sensors (NTC), mains voltage, and current shunts for closed-loop power regulation, while the 2.7 V to 5.5 V supply directly accepts rectified 5 V rails typical of these appliances, eliminating a regulator stage.
Recommandé
BLDC / PMSM Low-Voltage Motor Control
The MC9S08PT60VLH drives small BLDC or PMSM motors in fans, pumps, and small appliances using its on-chip FlexTimer module with PWM outputs and complementary mode with dead-time insertion. At 20 MHz CPU clock, the control loop can execute field-oriented control or trapezoidal commutation at switching frequencies up to 20 kHz with adequate timing margin. The 12-bit ADC provides back-EMF and current sensing for sensorless startup, while the wide supply range lets the MCU share the motor bus directly through a simple LDO.
Recommandé
Touch-Key Human-Machine Interface (HMI)
Capacitive touch keypads, sliders, and wheel-based HMIs benefit from the MC9S08PT60VLH's hardware TSI block, which scans up to 25 electrodes without an external touch controller and supports both self- and mutual-capacitance sensing. The TSI hardware offloads scanning from the CPU, freeing cycles for backlight control, LED PWM, and user-feedback logic, while the 60 KB flash comfortably holds look-up tables for slider interpolation and gesture recognition. The 64-LQFP exposes enough GPIO for both TSI electrodes and the display interface.
Recommandé
Industrial Sensor Modules and Smart Sensors
Process and factory-automation sensor modules such as pressure, flow, or proximity sensors use the MC9S08PT60VLH to digitize analog inputs, run linearization and filtering, and output results via SPI, I2C, or UART. The 12-bit ADC with up to 16 channels handles multi-sensor aggregation, while the on-chip 256-byte EEPROM stores calibration coefficients and serial numbers without an external memory chip. The industrial -40 C to +105 C temperature rating is suitable for non-condensing factory-floor environments.
Recommandé
Low-Cost IoT Edge Nodes (Wired or Sub-GHz)
Wired or sub-GHz IoT edge nodes such as smart thermostats, occupancy sensors, and energy-harvesting switches use the MC9S08PT60VLH as the main MCU thanks to its low active current, fast wake-up from stop modes, and SCI/SPI/I2C for connecting to radios or wired transceivers. The 60 KB flash and 4 KB RAM are sufficient for small protocol stacks and over-the-air update staging. The wide supply range supports direct battery or energy-harvester interfacing through a simple boost converter.
Recommandé
Automotive Body and Comfort Modules (AEC-Q100 Migration Path)
Although the MC9S08PT60VLH itself is industrial grade, the S08PT architecture maps directly to automotive body-comfort applications (door modules, mirror controllers, seat adjusters) and NXP offers the AEC-Q100-qualified S9S08RNA60W1VLHR in the same 64-LQFP. Designers using the PT60 in prototypes can validate firmware on industrial-grade parts then migrate firmware to the automotive-qualified drop-in for production, reusing PCB layout and toolchain investment while gaining AEC-Q100 compliance.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08PT60VLH — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08PT32VLH | MC9S08PT16VLH | S9S08RNA60W1VLHR | MC9S08PA60VLH |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP - same | 64-LQFP - same | 64-LQFP - same | 64-LQFP - same |
| Flash Memory | 60 KB | 32 KB | 16 KB | 60 KB | 60 KB |
| RAM | 4 KB | 4 KB | 2 KB | 4 KB | 4 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B |
| Touch Sensing Interface (TSI) | Yes (up to 25 electrodes) | Yes | Yes | Yes | No |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| AEC-Q100 Automotive Qualified | No (industrial grade) | No | No | Yes | No |
| Operating Temperature Range | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +125 C (automotive) | -40 C to +105 C |
| Lifecycle Status | NRND | Active / NRND | Active / NRND | Active (automotive) | Active / NRND |
Principaux différenciateurs
- Higher flash density than MC9S08PT32VLH with pin-compatibility (vs MC9S08PT32VLH)
- Industrial-grade with TSI hardware versus S9S08RNA60W1VLHR's automotive grade (vs S9S08RNA60W1VLHR)
- Hardware TSI versus MC9S08PA60VLH lacking touch interface (vs MC9S08PA60VLH)
Notes de conception
Decoupling: place a 100 nF ceramic capacitor within 5 mm of each VDD/VSS pin pair and a bulk 4.7 uF to 10 uF tantalum or ceramic capacitor on the main supply rail. For ADC accuracy, isolate VDDA/VSSA from digital VDD/VSS using a ferrite bead and dedicated 100 nF + 10 uF decoupling on the analog supply pin (VDDAD). The 2.7 V to 5.5 V supply range allows direct 3.3 V or 5 V operation, but avoid exceeding 5.5 V transient or the on-chip voltage regulator will stress.
Crystal placement: keep the external crystal (XTAL/EXTAL) traces short (under 5 mm) and symmetric, with the load capacitors placed adjacent to the MCU pins. Keep TSI electrode traces routed away from switching traces and digital signals to prevent touch false triggers; add a ground guard ring around each TSI electrode for noise immunity per the NXP TSI application note guidance.
Common pitfalls: (1) Do not ground unused TSI pins - the datasheet specifies leaving them floating or configuring them to disabled state, otherwise leakage current corrupts touch measurements. (2) When migrating from PT32 to PT60, verify linker scripts because the higher flash size changes vector table location. (3) The BKGD/MS pin is shared with mode-entry; if pulled low at reset, the MCU enters BDM and stays halted, which can brick a board if not isolated from the rest of the circuit.
Informations de conformité
RoHS compliant per DigiKey product listing (https://www.digikey.com/en/products/detail/nxp-usa-inc/MC9S08PT60VLH/3742846). Industrial-grade temperature range (-40 C to +105 C), not AEC-Q100 qualified; for AEC-Q100, choose the S9S08RNA60W1VLHR drop-in.
