MC9S08PT60VLH - 60KB Flash 8-bit S08 MCU | NXP | 64-LQFP
부품 번호: MC9S08PT60VLH ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.42 | $5.42 |
| 10 | $4.85 | $48.50 |
| 100 | $4.32 | $432.00 |
| 500 | $3.91 | $1,955.00 |
| 1,000 | $3.65 | $3,650.00 |
MC9S08PT60VLH 개요
An HCS08 microcontroller (MCU) is an 8-bit CISC Harvard-architecture device built around a low-power S08 CPU core, internal flash, RAM, EEPROM, and a rich set of on-chip peripherals including timers, ADC, and communication interfaces. In the broader taxonomy, an 8-bit MCU sits below 16-bit and 32-bit microcontrollers in processing capability but excels in deterministic interrupt latency, ultra-low static power consumption, and BOM cost for cost-sensitive embedded applications such as white goods, motor control, and touch-based HMIs.
Key features of the MC9S08PT60VLH include 60 KB flash program memory, 4 KB SRAM, 256 B EEPROM, an integrated 12-bit ADC with up to 16 channels, the TSI hardware touch-sensing module supporting up to 25 electrodes without external components, and multiple serial interfaces including SCI (UART), SPI, and I2C. The wide 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system designs common in legacy industrial platforms.
Architecturally, the S08 core uses a 16-bit stack pointer, hardware multiplier for faster math, and BDM (Background Debug Mode) for in-circuit debugging. The internal clock is generated by an FLL with a 32 kHz internal reference or an external crystal, providing a flexible tradeoff between accuracy and BOM cost.
Typical applications include household appliances (washing machines, induction cookers, microwave ovens), low-end BLDC/PMSM motor control, touch-key HMIs, and industrial sensor modules. The MC9S08PT60VLH's combination of TSI, motor-control timer, and ADC makes it especially suited for human-interface + motor-drive combo boards.
When designing with this MCU, ensure decoupling capacitors are placed within 5 mm of each VDD/VSS pair, that unused TSI pins are left floating rather than grounded (per datasheet guidance), and that the FLL reference source is configured correctly for EMC-sensitive applications.
This page synthesizes distributor stock, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten time-to-market for cost-sensitive 8-bit embedded designs.
드롭인 대체품: MC9S08PT60VLH — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S08PT60VLH (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Core, Operating Temperature Range, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S08PT32VLH
✅ 드롭인✓ 재고 있음
$2.05 / 개
데이터시트 보기 →MC9S08PT16VLH
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
S9S08RNA60W1VLHR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08PA60VLH
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S08SH8CTG
✅ 드롭인✓ 재고 있음
$1.62 / 개
데이터시트 보기 →MC9S08PT60VLH 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | S08PT |
| Core | HCS08 (S08) |
| Core Size | 8-bit |
| 최대 클록 주파수 | 20 MHz |
| Program Memory (Flash) | 60 KB (60K x 8) |
| RAM | 4 KB |
| EEPROM | 256 B |
| Supply Voltage Range | 2.7 V to 5.5 V |
| 동작 온도 범위 | -40 C to +105 C (industrial) |
| 패키지 | 64-LQFP (10 x 10 mm) |
| 실장 유형 | Surface Mount |
| ADC | 12-bit, up to 16 channels |
| Touch Sensing Interface (TSI) | Yes (up to 25 electrodes) |
| Communication Interfaces | SCI (UART), SPI, I2C |
| Timers | FlexTimer (motor-control), TPM |
| Operating Supply Voltage (typ) | 3.3 V / 5 V |
| 데이터 버스 폭 | 8-bit |
| Program Memory Type | Flash |
| RoHS 상태 | Compliant (per DigiKey product listing) |
MC9S08PT60VLH 핀 구성
| 핀 1 | PTC0/TCLK0 — Port C bit 0 / TPM clock input |
| 핀 2 | PTC1 — Port C bit 1 / ALT peripherals |
| 핀 3 | PTC2 — Port C bit 2 / ALT peripherals |
| 핀 4 | PTC3 — Port C bit 3 / ALT peripherals |
| 핀 5 | PTC4 — Port C bit 4 / ALT peripherals |
| 핀 6 | PTC5 — Port C bit 5 / ALT peripherals |
| 핀 7 | PTC6 — Port C bit 6 / ALT peripherals |
| 핀 8 | PTC7 — Port C bit 7 / ALT peripherals |
| 핀 9 | PTD0/FTM0CH0 — Port D bit 0 / FlexTimer channel 0 |
| 핀 10 | PTD1/FTM0CH1 — Port D bit 1 / FlexTimer channel 1 |
| 핀 11 | PTD2/FTM0CH2 — Port D bit 2 / FlexTimer channel 2 |
| 핀 12 | PTD3/FTM0CH3 — Port D bit 3 / FlexTimer channel 3 |
| 핀 13 | PTD4/FTM0CH4 — Port D bit 4 / FlexTimer channel 4 |
| 핀 14 | PTD5/FTM0CH5 — Port D bit 5 / FlexTimer channel 5 |
| 핀 15 | PTD6/FTM1CH0 — Port D bit 6 / FlexTimer 1 channel 0 |
| 핀 16 | PTD7/FTM1CH1 — Port D bit 7 / FlexTimer 1 channel 1 |
| 핀 17 | VDD — Supply voltage (2.7 V to 5.5 V) |
| 핀 18 | VSS — Ground |
| 핀 19 | PTE0/TxD1 — Port E bit 0 / SCI1 transmit |
| 핀 20 | PTE1/RxD1 — Port E bit 1 / SCI1 receive |
| 핀 21 | PTE2/SPSCK1 — Port E bit 2 / SPI1 clock |
| 핀 22 | PTE3/MOSI1 — Port E bit 3 / SPI1 master out |
| 핀 23 | PTE4/MISO1 — Port E bit 4 / SPI1 master in |
| 핀 24 | PTE5/SS1 — Port E bit 5 / SPI1 slave select |
| 핀 25 | PTE6/SCL1 — Port E bit 6 / I2C1 clock |
| 핀 26 | PTE7/SDA1 — Port E bit 7 / I2C1 data |
| 핀 27 | BKGD/MS — Background Debug Mode / Mode Select |
| 핀 28 | RESET — Reset input (active low) |
| 핀 29 | PTA0/TSI0CH0 — Port A bit 0 / TSI channel 0 |
| 핀 30 | PTA1/TSI0CH1 — Port A bit 1 / TSI channel 1 |
| 핀 31 | PTA2/TSI0CH2 — Port A bit 2 / TSI channel 2 |
| 핀 32 | PTA3/TSI0CH3 — Port A bit 3 / TSI channel 3 |
| 핀 33 | PTA4/TSI0CH4 — Port A bit 4 / TSI channel 4 |
| 핀 34 | PTA5/TSI0CH5 — Port A bit 5 / TSI channel 5 |
| 핀 35 | PTA6/TSI0CH6 — Port A bit 6 / TSI channel 6 |
| 핀 36 | PTA7/TSI0CH7 — Port A bit 7 / TSI channel 7 |
| 핀 37 | PTB0/ADP0 — Port B bit 0 / ADC channel 0 |
| 핀 38 | PTB1/ADP1 — Port B bit 1 / ADC channel 1 |
| 핀 39 | PTB2/ADP2 — Port B bit 2 / ADC channel 2 |
| 핀 40 | PTB3/ADP3 — Port B bit 3 / ADC channel 3 |
| 핀 41 | PTB4/ADP4 — Port B bit 4 / ADC channel 4 |
| 핀 42 | PTB5/ADP5 — Port B bit 5 / ADC channel 5 |
| 핀 43 | PTB6/ADP6 — Port B bit 6 / ADC channel 6 |
| 핀 44 | PTB7/ADP7 — Port B bit 7 / ADC channel 7 |
| 핀 45 | VDDAD/VREFAD — ADC supply / reference |
| 핀 46 | VSSAD — ADC ground |
| 핀 47 | PTC0/TSI0CH8 — Port C bit 0 / TSI channel 8 (ALT) |
| 핀 48 | PTC1/TSI0CH9 — Port C bit 1 / TSI channel 9 (ALT) |
| 핀 49 | PTC2/TSI0CH10 — Port C bit 2 / TSI channel 10 (ALT) |
| 핀 50 | PTC3/TSI0CH11 — Port C bit 3 / TSI channel 11 (ALT) |
| 핀 51 | PTC4/TSI0CH12 — Port C bit 4 / TSI channel 12 (ALT) |
| 핀 52 | PTC5/TSI0CH13 — Port C bit 5 / TSI channel 13 (ALT) |
| 핀 53 | PTC6/TSI0CH14 — Port C bit 6 / TSI channel 14 (ALT) |
| 핀 54 | PTC7/TSI0CH15 — Port C bit 7 / TSI channel 15 (ALT) |
| 핀 55 | VDD — Supply voltage |
| 핀 56 | VSS — Ground |
| 핀 57 | PTF0/XTAL — Port F bit 0 / crystal oscillator pin |
| 핀 58 | PTF1/EXTAL — Port F bit 1 / external clock / crystal |
| 핀 59 | PTF2 — Port F bit 2 / ALT peripherals |
| 핀 60 | PTF3 — Port F bit 3 / ALT peripherals |
| 핀 61 | PTF4 — Port F bit 4 / ALT peripherals |
| 핀 62 | PTF5 — Port F bit 5 / ALT peripherals |
| 핀 63 | PTF6 — Port F bit 6 / ALT peripherals |
| 핀 64 | PTF7 — Port F bit 7 / ALT peripherals |
일반적인 애플리케이션
MC9S08PT60VLH 적합 용도: 6 애플리케이션s: Household Appliance Control (Washing Machine, Induction Cooker), BLDC / PMSM Low-Voltage Motor Control, Touch-Key Human-Machine Interface (HMI), Industrial Sensor Modules and Smart Sensors, Low-Cost IoT Edge Nodes (Wired or Sub-GHz), Automotive Body and Comfort Modules (AEC-Q100 Migration Path).
Household Appliance Control (Washing Machine, Induction Cooker)
The MC9S08PT60VLH suits washing machine, induction cooker, and microwave oven control boards where 60 KB flash fits the user-interface state machine plus motor-control firmware, and the on-chip Touch Sensing Interface (TSI) drives up to 25 capacitive buttons or sliders with no external touch IC, reducing BOM cost. The 12-bit ADC samples temperature sensors (NTC), mains voltage, and current shunts for closed-loop power regulation, while the 2.7 V to 5.5 V supply directly accepts rectified 5 V rails typical of these appliances, eliminating a regulator stage.
추천
BLDC / PMSM Low-Voltage Motor Control
The MC9S08PT60VLH drives small BLDC or PMSM motors in fans, pumps, and small appliances using its on-chip FlexTimer module with PWM outputs and complementary mode with dead-time insertion. At 20 MHz CPU clock, the control loop can execute field-oriented control or trapezoidal commutation at switching frequencies up to 20 kHz with adequate timing margin. The 12-bit ADC provides back-EMF and current sensing for sensorless startup, while the wide supply range lets the MCU share the motor bus directly through a simple LDO.
추천
Touch-Key Human-Machine Interface (HMI)
Capacitive touch keypads, sliders, and wheel-based HMIs benefit from the MC9S08PT60VLH's hardware TSI block, which scans up to 25 electrodes without an external touch controller and supports both self- and mutual-capacitance sensing. The TSI hardware offloads scanning from the CPU, freeing cycles for backlight control, LED PWM, and user-feedback logic, while the 60 KB flash comfortably holds look-up tables for slider interpolation and gesture recognition. The 64-LQFP exposes enough GPIO for both TSI electrodes and the display interface.
추천
Industrial Sensor Modules and Smart Sensors
Process and factory-automation sensor modules such as pressure, flow, or proximity sensors use the MC9S08PT60VLH to digitize analog inputs, run linearization and filtering, and output results via SPI, I2C, or UART. The 12-bit ADC with up to 16 channels handles multi-sensor aggregation, while the on-chip 256-byte EEPROM stores calibration coefficients and serial numbers without an external memory chip. The industrial -40 C to +105 C temperature rating is suitable for non-condensing factory-floor environments.
추천
Low-Cost IoT Edge Nodes (Wired or Sub-GHz)
Wired or sub-GHz IoT edge nodes such as smart thermostats, occupancy sensors, and energy-harvesting switches use the MC9S08PT60VLH as the main MCU thanks to its low active current, fast wake-up from stop modes, and SCI/SPI/I2C for connecting to radios or wired transceivers. The 60 KB flash and 4 KB RAM are sufficient for small protocol stacks and over-the-air update staging. The wide supply range supports direct battery or energy-harvester interfacing through a simple boost converter.
추천
Automotive Body and Comfort Modules (AEC-Q100 Migration Path)
Although the MC9S08PT60VLH itself is industrial grade, the S08PT architecture maps directly to automotive body-comfort applications (door modules, mirror controllers, seat adjusters) and NXP offers the AEC-Q100-qualified S9S08RNA60W1VLHR in the same 64-LQFP. Designers using the PT60 in prototypes can validate firmware on industrial-grade parts then migrate firmware to the automotive-qualified drop-in for production, reusing PCB layout and toolchain investment while gaining AEC-Q100 compliance.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S08PT60VLH — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S08PT32VLH | MC9S08PT16VLH | S9S08RNA60W1VLHR | MC9S08PA60VLH |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP - same | 64-LQFP - same | 64-LQFP - same | 64-LQFP - same |
| Flash Memory | 60 KB | 32 KB | 16 KB | 60 KB | 60 KB |
| RAM | 4 KB | 4 KB | 2 KB | 4 KB | 4 KB |
| EEPROM | 256 B | 256 B | 256 B | 256 B | 256 B |
| Touch Sensing Interface (TSI) | Yes (up to 25 electrodes) | Yes | Yes | Yes | No |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| AEC-Q100 Automotive Qualified | No (industrial grade) | No | No | Yes | No |
| Operating Temperature Range | -40 C to +105 C | -40 C to +105 C | -40 C to +105 C | -40 C to +125 C (automotive) | -40 C to +105 C |
| Lifecycle Status | NRND | Active / NRND | Active / NRND | Active (automotive) | Active / NRND |
주요 차별점
- Higher flash density than MC9S08PT32VLH with pin-compatibility (vs MC9S08PT32VLH)
- Industrial-grade with TSI hardware versus S9S08RNA60W1VLHR's automotive grade (vs S9S08RNA60W1VLHR)
- Hardware TSI versus MC9S08PA60VLH lacking touch interface (vs MC9S08PA60VLH)
설계 노트
Decoupling: place a 100 nF ceramic capacitor within 5 mm of each VDD/VSS pin pair and a bulk 4.7 uF to 10 uF tantalum or ceramic capacitor on the main supply rail. For ADC accuracy, isolate VDDA/VSSA from digital VDD/VSS using a ferrite bead and dedicated 100 nF + 10 uF decoupling on the analog supply pin (VDDAD). The 2.7 V to 5.5 V supply range allows direct 3.3 V or 5 V operation, but avoid exceeding 5.5 V transient or the on-chip voltage regulator will stress.
Crystal placement: keep the external crystal (XTAL/EXTAL) traces short (under 5 mm) and symmetric, with the load capacitors placed adjacent to the MCU pins. Keep TSI electrode traces routed away from switching traces and digital signals to prevent touch false triggers; add a ground guard ring around each TSI electrode for noise immunity per the NXP TSI application note guidance.
Common pitfalls: (1) Do not ground unused TSI pins - the datasheet specifies leaving them floating or configuring them to disabled state, otherwise leakage current corrupts touch measurements. (2) When migrating from PT32 to PT60, verify linker scripts because the higher flash size changes vector table location. (3) The BKGD/MS pin is shared with mode-entry; if pulled low at reset, the MCU enters BDM and stays halted, which can brick a board if not isolated from the rest of the circuit.
규정 준수 정보
RoHS compliant per DigiKey product listing (https://www.digikey.com/en/products/detail/nxp-usa-inc/MC9S08PT60VLH/3742846). Industrial-grade temperature range (-40 C to +105 C), not AEC-Q100 qualified; for AEC-Q100, choose the S9S08RNA60W1VLHR drop-in.
