MC9S08SH4MPJ - 8-bit S08 MCU, 4KB Flash, 40MHz | NXP DIP-20
Référence : MC9S08SH4MPJ ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $26.14 | $26,14 |
| 10 | $23.52 | $235,20 |
| 100 | $19.5 | $1 950,00 |
| 500 | $16.1 | $8 050,00 |
| 1 000 | $13.5 | $13 500,00 |
MC9S08SH4MPJ Présentation
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals such as timers, ADC, and communication blocks. The HCS08 core is NXP's enhanced 8-bit CPU; the S08SH belongs to the S08 family of microcontrollers, which itself sits inside the broader category of microcontrollers (MCUs) and embedded processors. LDOs, op-amps, and power management ICs typically surround an MCU on a PCB, while the MCU orchestrates sensors, actuators, and user I/O. The 8-bit segment remains the lowest-cost option for deterministic, simple control tasks such as appliance control, lighting, and human-machine interfaces.
Key features include 4KB Flash, 256B RAM, up to 32 interrupt sources, an internal clock source, and a background debug mode (BGND) for non-intrusive in-circuit debugging. The device supports 5V-tolerant I/O and includes an internal voltage regulator with a power-on reset (POR) block.
The S08SH family is pin, tool, and software compatible with the S08SG series, enabling code reuse between the two. The ADC's 2.5 µs conversion time and integrated temperature sensor make it suitable for sensor-conditioning applications, while the SCI/SPI/I²C interfaces support communication with master controllers or sensors.
Typical applications include appliance control, building automation, simple user interfaces, low-end motor control (small fans, solenoids), and sensor signal conditioning. The DIP-20 package supports hobby, prototyping, and through-hole manufacturing where SMD is undesirable.
When designing with the MC9S08SH4MPJ, ensure that decoupling capacitors are placed close to VDD/VSS, the RESET pin is properly pulled up, and the BGND pin is not left floating in production. The part is a drop-in for other S08SH-family members with the same Flash/RAM configuration.
This page combines distributor pricing, datasheet excerpts, drop-in same-family alternatives, and design notes that are not aggregated on DigiKey, Mouser, or Octopart product pages.
Alternatives de remplacement direct pour MC9S08SH4MPJ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S08SH4MPJ (même facteur de forme et même empreinte) — différant par Mounting Type, ADC, Core, Instruction Set, Package.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MC9S08SH4MWJ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08SH4MFK
✅ Remplacement direct✓ En stock
$2.15 / unité
Voir la fiche technique →MC9S08SH4CWJ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MC9S08SH8CTGR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08QD4CSC
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC9S08SH4MPJ Valeurs maximales et caractéristiques électriques
| Core | HCS08 (enhanced 8-bit) |
| CPU Architecture | CISC, HC08 instruction set with BGND |
| Maximum Bus Frequency | 40 MHz |
| Program Flash Memory | 4 KB |
| RAM | 256 B |
| Tension d'alimentation | 2.7 V to 5.5 V |
| Température de fonctionnement | -40C to +125C (automotive grade) |
| ADC | 12-channel, 10-bit, 2.5 us conversion time |
| Capteur de température interne | Yes |
| Communication Interfaces | SCI (UART), SPI, I2C |
| Interrupt Sources | Up to 32 |
| Boîtier | 20-pin PDIP (DIP-20, 0.300 inch / 7.62 mm) |
| Type de montage | Through-Hole (THT) |
| Temperature Grade | Automotive |
| Compatibility Family | S08SH, software/tool compatible with S08SG |
| Debug | Background Debug Mode (BGND) |
Configuration des broches de MC9S08SH4MPJ
| Broche 1 | VDD — Power supply (2.7V to 5.5V) |
| Broche 2 | VSS — Ground |
| Broche 3 | RESET — Reset input, active low |
| Broche 4 | BKGD/MS — Background Debug / Mode Select |
| Broche 5 | PTB0/TCLK — Port B bit 0 / Timer clock input |
| Broche 6 | PTB1 — Port B bit 1 |
| Broche 7 | PTB2 — Port B bit 2 |
| Broche 8 | PTB3 — Port B bit 3 |
| Broche 9 | PTA0/ADP0 — Port A bit 0 / ADC channel 0 |
| Broche 10 | PTA1/ADP1 — Port A bit 1 / ADC channel 1 |
| Broche 11 | PTA2/ADP2 — Port A bit 2 / ADC channel 2 |
| Broche 12 | PTA3/ADP3 — Port A bit 3 / ADC channel 3 |
| Broche 13 | PTA4/ADP4 — Port A bit 4 / ADC channel 4 |
| Broche 14 | PTA5/ADP5/SDA — Port A bit 5 / ADC channel 5 / I2C SDA |
| Broche 15 | PTA6/ADP6/SCL — Port A bit 6 / ADC channel 6 / I2C SCL |
| Broche 16 | PTA7 — Port A bit 7 |
| Broche 17 | PTB4 — Port B bit 4 |
| Broche 18 | PTB5 — Port B bit 5 |
| Broche 19 | PTB6 — Port B bit 6 |
| Broche 20 | PTB7 — Port B bit 7 |
Applications typiques
MC9S08SH4MPJ convient pour 6 applications: Appliance Control Board, Hobby and Educational MCU Boards, Sensor Signal Conditioning Node, LED Lighting Controller, Automotive Auxiliary Module, Simple Human-Machine Interface (HMI).
Appliance Control Board
The MC9S08SH4MPJ fits low-cost appliance controls (washing machines, dishwashers, microwaves) because its 40 MHz HCS08 core executes simple state machines and PWM logic deterministically. The 12-channel 10-bit ADC at 2.5 us conversion reads thermistors, current shunts, and user knob inputs, while the SCI/SPI/I²C interfaces communicate with display modules or Wi-Fi/BLE modules. The 4KB Flash holds the full firmware including fault-handling routines, and the wide 2.7-5.5V supply range lets it run from rectified mains directly with a small linear regulator. NXP's S08SH family is tool-compatible with the same CodeWarrior toolchain as the higher-end S08 parts.
Recommandé
Hobby and Educational MCU Boards
The MC9S08SH4MPJ's 20-pin PDIP through-hole package suits breadboard prototyping and educational kits where students learn 8-bit assembly or C programming. The DIP-20 form factor drops into standard 0.1-inch breadboards and cable management protocols teach students how to wire I/O pins to LEDs, buttons, and simple sensors. The 4KB Flash holds beginner projects from LED blinkers to line-following robots, and the BGND background-debug interface allows in-circuit debugging without expensive tools. NXP's S08SH family shares its toolchain with the S08SG series, so the same IDE supports multiple project families.
Recommandé
Sensor Signal Conditioning Node
The MC9S08SH4MPJ works as a small sensor-conditioning node where multiple analog inputs (temperature, humidity, light) are read and transmitted over a digital interface to a master controller. The 12-channel 10-bit ADC with 2.5 us conversion samples up to a dozen sensors sequentially, while the integrated temperature sensor calibrates other sensors against the die temperature. The SCI/SPI/I²C interfaces forward processed data to a master PLC, Raspberry Pi, or wireless MCU module. The automotive -40C to +125C temperature grade lets the node survive outdoor and under-hood environments.
Recommandé
LED Lighting Controller
The MC9S08SH4MPJ drives small LED lighting controllers and dimmers because its 40 MHz bus and PWM-capable timers generate high-resolution brightness ramps without flicker. The 12-channel ADC reads ambient light sensors and potentiometer inputs, while the SCI interface connects to DMX512 or 0-10V dimming networks. The 2.7-5.5V supply matches constant-current LED driver rails directly. NXP's S08SH family supports low-power wait/stop instructions so standby power stays below 1 mA when the lights are off.
Recommandé
Automotive Auxiliary Module
The MC9S08SH4MPJ's automotive temperature grade (-40C to +125C) and 5V supply tolerance suit auxiliary vehicle modules such as window controllers, mirror adjusters, seat-position sensors. The 12-channel ADC reads position-feedback potentiometers, current shunts, and temperature sensors, while the SCI/SPI interfaces communicate with the central body controller. The S08SH family's pin and tool compatibility with the S08SG series enables code reuse across vehicle platforms. Note: this part is End-of-Life and new automotive designs should migrate to Kinetis E-series (MKE02Z).
Recommandé
Simple Human-Machine Interface (HMI)
The MC9S08SH4MPJ drives simple HMIs such as membrane-key panels, 7-segment displays, and small character LCDs because its 40 MHz core runs refresh routines and debounce logic efficiently. The SCI interface connects to a host PLC for status updates, while the GPIO pins scan 4x4 keypads and drive LED indicators. The 4KB Flash holds the full HMI state machine and the -40C to +125C temperature grade tolerates industrial cabinet environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S08SH4MPJ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S08SH4MWJ | MC9S08SH4MFK | MC9S08SH4CWJ | MC9S08SH8CTGR | MC9S08QD4CSC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 20-pin PDIP | 20-pin PDIP (same) | 20-pin PDIP adapter | 20-pin PDIP (same) | TSSOP-20 (different) | 20-pin PDIP (same) |
| Core | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit | HCS08 8-bit |
| Maximum Bus Frequency | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 16 MHz (-60%) |
| Flash Memory | 4 KB | 4 KB | 4 KB | 4 KB | 8 KB (+100%) | 4 KB |
| RAM | 256 B | 256 B | 256 B | 256 B | 512 B (+100%) | 256 B |
| Supply Voltage | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V |
| ADC | 12-ch 10-bit | 12-ch 10-bit | 12-ch 10-bit | 12-ch 10-bit | 8-ch 10-bit (-33%) | 4-ch 10-bit (-67%) |
Principaux différenciateurs
- Same-family 20-pin PDIP drop-in alternative with identical die (vs MC9S08SH4MWJ)
- Double the memory at a different footprint (vs MC9S08SH8CTGR)
- Lower-cost, lower-speed family alternative (vs MC9S08QD4CSC)
Notes de conception
Estimated: at 40 MHz and 5V supply, the MC9S08SH4MPJ draws roughly 15-20 mA active current. Place a 100 nF decoupling capacitor within 5 mm of the VDD pin and a 10 uF bulk capacitor on the supply rail. The internal voltage regulator generates the core supply from VDD, so external regulation is not required. For low-power stop mode, current drops to single-digit µA but the BGND pin must be held high to prevent accidental debug entry.
Keep ADC analog traces (PTA0-7) short and away from PWM or switching signals to minimize noise coupling. Add a ground pour under the MCU and route analog/digital grounds separately, joining them at a single point near the VSS pin. The RESET pin requires an external 10 kohm pull-up to VDD; do not leave it floating during power-up or the part may enter test mode.
Do not exceed 5.5V on VDD - the part lacks an absolute-max clamp and over-voltage will damage the internal regulator. The BKGD/MS pin must be held high during reset; a floating BKGD pin prevents normal startup. The 4KB Flash limit means inefficient code or large constant tables will exhaust memory; use the compiler's --code-size optimization flags. For I²C communication, ensure external pull-ups (4.7 kohm) are present on SDA and SCL - the MCU's internal weak pull-ups are insufficient for reliable bus operation above 100 kHz.
If using the internal clock source, no crystal layout is needed. If routing to an external crystal/resonator, keep the traces under 5 mm and surround them with ground. The through-hole DIP-20 footprint requires 0.1 inch pin pitch holes on the PCB; do not mix it with SOIC-20 footprints. Pin 1 marker is the dot on the package, located near the VDD pin.
Informations de conformité
Part is End-of-Life per NXP. RoHS and REACH status not explicitly stated in the verified web data. AEC-Q100 not qualified per the datasheet; temperature grade is automotive (-40C to +125C) but not formally AEC-Q100 certified.
