MCIMX257DJM4A - i.MX25 ARM9 400MHz 400-LFBGA MPU | NXP
Référence : MCIMX257DJM4A ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $24.5 | $24,50 |
| 10 | $22.1 | $221,00 |
| 100 | $19.85 | $1 985,00 |
| 500 | $18.2 | $9 100,00 |
| 1 000 | $16.54 | $16 540,00 |
MCIMX257DJM4A Présentation
A microprocessor (MPU) is an integrated circuit that contains the CPU, memory control, and peripheral interfaces on a single silicon die, serving as the central processing unit of an embedded system. Within the broader taxonomy, the MCIMX257DJM4A is an ARM9-based applications processor, a sub-class of microprocessors specialized for low-power multimedia and human-machine interface (HMI) workloads in industrial and consumer products. It sits within the i.MX family hierarchy: i.MX25 -> i.MX application processors -> microprocessors -> integrated circuits.
Key specifications include an ARM926EJ-S core with 16 KB instruction cache and 16 KB data cache, a 400 MHz maximum clock rate, integrated 10/100 Ethernet MAC, two USB 2.0 PHYs (HS OTG + HS Host), three 12-bit ADCs, a touchscreen controller, and an LCD controller supporting resolutions up to WVGA. The device operates across a 1.38 V to 1.52 V core supply and 3.0 V to 3.6 V I/O supply, with industrial temperature range of -40 °C to +85 °C.
Architecturally, the i.MX25 uses an ARM926EJ-S core with a vector floating-point (VFP) coprocessor option and a multi-layer AHB bus matrix for high-throughput peripheral access. The silicon version 1.2 designation reflects hardware revision fixes applied to the original i.MX25 die, including USB PHY errata improvements and power-management refinements.
Typical applications include industrial human-machine interface (HMI) panels, point-of-sale terminals, portable medical monitoring devices, building automation controllers, and consumer multimedia appliances. The wide peripheral set (Ethernet, USB, CAN, I2S, SPI, UART, LCD) allows a single MPU to replace a multi-chip solution in cost-sensitive designs.
When designing with this part, ensure the PCB provides the four-layer BGA breakout needed for the 400-ball MAPBGA footprint and that the boot configuration pins are properly pulled to select the desired boot source (NOR, NAND, SD/MMC, or serial). Adequate thermal vias under the package improve heat extraction for continuous 400 MHz operation.
This page synthesizes NXP official documentation, cross-reference data, distributor pricing, and practical design guidance not consolidated in a single manufacturer datasheet.
Alternatives de remplacement direct pour MCIMX257DJM4A — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCIMX257DJM4A (même facteur de forme et même empreinte) — différant par Package, LCD Controller, Core Architecture, Operating Temperature, ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MCIMX253DJM4A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCIMX255DJM4A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCIMX258CJM4A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCIMX250DJM4A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCIMX257CJM4A
✅ Remplacement direct✓ En stock
$15.95 / unité
Voir la fiche technique →MCIMX251DJM4A
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCIMX257DJM4A Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM926EJ-S |
| Core Count | 1 |
| Largeur du bus de données | 32-bit |
| Fréquence d'horloge maximale | 400 MHz |
| Internal SRAM | 128 KB |
| Number of I/O | 128 |
| Boîtier / Format | 400-LFBGA (17x17 mm) |
| Supply Voltage - Core | 1.38 V to 1.52 V |
| Supply Voltage - I/O | 3.0 V to 3.6 V |
| Température de fonctionnement | -40 °C to +85 °C |
| Oscillator Type | External |
| Instruction Cache | 16 KB |
| Data Cache | 16 KB |
| USB PHYs | 2 (HS OTG + HS Host) |
| Ethernet MAC | 10/100 Mbps |
| ADC Channels | 3 x 12-bit |
| Touchscreen Controller | Yes (integrated) |
| LCD Controller | Yes (up to WVGA) |
| Packaging | Tray |
| Silicon Version | 1.2 |
| Series | i.MX25 |
| Statut RoHS | Compliant |
Guide de configuration des broches du MCIMX257DJM4A 400-lfbga (17x17 mm)
Configuration des broches du MCIMX257DJM4A (boîtier 400-lfbga (17x17 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MCIMX257DJM4A.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MCIMX257DJM4A convient pour 6 applications: Industrial Human-Machine Interface (HMI) Panels, Point-of-Sale (POS) Terminals, Portable Medical Monitoring Devices, Building Automation Controllers, Consumer Multimedia Appliances, Automotive Aftermarket Telematics.
Industrial Human-Machine Interface (HMI) Panels
The MCIMX257DJM4A is purpose-built for industrial HMI panels that drive WVGA TFT LCDs while simultaneously managing touch input, Ethernet fieldbus traffic, and USB peripherals. Its ARM926EJ-S core at 400 MHz delivers enough throughput to render 24-bit color graphics at 60 fps while leaving CPU headroom for Modbus/TCP or EtherNet/IP stack execution. The integrated 12-bit ADC and 4-wire touchscreen controller eliminate the need for external touch ASICs, reducing BOM cost by typically $1-2 per board. At industrial temperature grade (-40 °C to +85 °C) and 1.38 V to 1.52 V core supply, it operates reliably in factory cabinets, outdoor kiosks, and process-control enclosures.
Recommandé
Point-of-Sale (POS) Terminals
POS terminals require a processor that can drive a touch display, manage USB peripherals (barcode scanner, receipt printer, cash drawer), encrypt transactions, and connect over Ethernet or Wi-Fi — all within a tight BOM. The MCIMX257DJM4A's integrated 10/100 Ethernet MAC, two USB 2.0 PHYs (OTG + Host), and LCD controller supporting WVGA let a single chip run the entire terminal without external PHY ICs. Its ARM926EJ-S core executes AES-128/256 encryption at speeds sufficient for contactless card transaction pipelines, while DDR2 memory support keeps BOM cost low versus LPDDR-only designs.
Recommandé
Portable Medical Monitoring Devices
Portable medical monitors (pulse oximeters, glucometers, ambulatory ECG) need a low-power ARM-class processor with deterministic real-time response, accurate ADC inputs, and reliable USB/serial connectivity to a host PC or gateway. The MCIMX257DJM4A's three 12-bit ADCs at up to 1 MSPS support multi-channel vital-sign acquisition, and its integrated touchscreen controller simplifies patient-facing UI without extra chips. Operating from a single 3.3 V I/O rail with a 1.38 V to 1.52 V core, it pairs well with single-cell Li-ion or 4xAA battery stacks, while its industrial temperature rating suits field-deployment scenarios.
Recommandé
Building Automation Controllers
Building automation controllers (HVAC, lighting, access) often need to run multiple fieldbus protocols (BACnet, Modbus, KNX, LonWorks) concurrently while presenting a local touch UI. The MCIMX257DJM4A's rich peripheral set — including multiple UART, SPI, I2C, CAN, and Ethernet — allows a single processor to bridge these protocols without external bridge ICs. Its 128 KB of internal SRAM supports modest protocol stacks directly, while external DDR2 handles larger web-server or graphical-interface payloads. The 400 MHz ARM9 core has ample headroom for BACnet/IP routing at typical building-network packet rates.
Recommandé
Consumer Multimedia Appliances
Consumer multimedia devices — smart-home hubs, networked audio players, kitchen appliances with displays — need an MPU that combines decent CPU throughput with integrated LCD, touch, USB, and Ethernet. The MCIMX257DJM4A delivers all of this in a single 17x17 mm BGA, allowing appliance OEMs to ship Wi-Fi-enabled, app-controlled products with rich graphical UIs at a competitive BOM. Running a lightweight Linux distribution on the i.MX25 enables OTA firmware updates and remote diagnostics, while the integrated LCD controller drives WVGA panels directly without a discrete graphics controller.
Recommandé
Automotive Aftermarket Telematics
Aftermarket telematics devices (fleet trackers, OBD-II dongles, dash cameras with connectivity) require a processor that can handle GPS parsing, CAN bus sniffing, cellular modem interfacing, and local storage — all at industrial temperature. The MCIMX257DJM4A's integrated CAN controller, USB OTG for cellular modems, SD/MMC for local storage, and -40 °C to +85 °C operation make it a strong fit. Note: this is the standard industrial-grade silicon, not AEC-Q100 qualified; for OEM automotive designs, NXP offers separately qualified i.MX25 variants.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MCIMX257DJM4A — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCIMX253DJM4A | MCIMX255DJM4A | MCIMX258CJM4A | MCIMX250DJM4A | MCIMX257CJM4A |
|---|---|---|---|---|---|---|
| Package | 400-LFBGA (17x17 mm) | 400-LFBGA (17x17 mm) - same | 400-LFBGA (17x17 mm) - same | 400-LFBGA (17x17 mm) - same | 400-LFBGA (17x17 mm) - same | 400-LFBGA (17x17 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | ARM926EJ-S 32-bit | ARM926EJ-S 32-bit | ARM926EJ-S 32-bit | ARM926EJ-S 32-bit | ARM926EJ-S 32-bit | ARM926EJ-S 32-bit |
| Number of I/O | 128 | 128 | 128 | 128 | 128 | 128 |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Principaux différenciateurs
- Integrated touchscreen + 12-bit ADC + LCD controller in one chip (vs MCIMX253DJM4A)
- Mature Linux and U-Boot BSP ecosystem (vs MCIMX258CJM4A)
- Active NXP lifecycle with 39-week lead time (vs Generic ARM9 BGA from other vendors)
Notes de conception
Estimated: the 400-ball MAPBGA on a 0.8 mm pitch requires a 4-layer PCB minimum with microvia-in-pad or dogbone fanout. Place a continuous ground plane on Layer 2 and a power plane on Layer 3 to provide low-impedance return paths for the 400 MHz ARM9 core and DDR2 signals. Thermal vias (0.3 mm drill, 1.0 mm pitch) under the center power balls reduce theta-JA by an estimated 25-35 %.
Estimated: at 400 MHz core voltage 1.4 V and typical Dhrystone activity, core current is approximately 200 mA (0.28 W); peak multimedia activity can pull 350 mA. Provide a switching regulator with at least 1 A of headroom on the core rail to absorb transient spikes. The DDR2 memory controller and I/O banks together may add another 200-400 mA; budget a 1.5 A 3.3 V LDO for the I/O supply.
Common design pitfalls include: forgetting to strap BOOT_MODE pins (the part will fail to boot if left floating); mis-ordering DDR2 address/control traces (the i.MX25 reference manual requires matched-length traces within 50 ps for proper DDR2-400 operation); omitting the external 32.768 kHz RTC crystal (required for low-power modes and RTC); and using non-qualified NAND/NOR flash (the i.MX25 boot ROM has a specific ONFI timing profile). Always validate boot from at least two boot sources before mass-production.
Informations de conformité
RoHS compliant and lead-free per NXP product page. Industrial temperature grade only - not AEC-Q100 qualified; NXP offers separate automotive-qualified i.MX25 variants. REACH and conflict-minerals compliance per NXP environmental declarations.
