MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP
Référence : MK20DN128VMP5 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.85 | $7,85 |
| 10 | $7.1 | $71,00 |
| 100 | $6.4 | $640,00 |
| 500 | $5.75 | $2 875,00 |
| 1 000 | $5.2 | $5 200,00 |
MK20DN128VMP5 Présentation
Key features include a 50 MHz Cortex-M4 core with single-precision FPU, 128 KB program flash, 16 KB SRAM, a USB 2.0 Full-Speed device/host/on-the-go controller, multiple serial interfaces (UART, SPI, I2C), a 16-channel 16-bit ADC, and flexible low-power modes for energy-aware applications. The 64 MAPBGA package provides a compact footprint suitable for space-constrained designs.
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (flash and RAM), and programmable peripherals. The Cortex-M4 core is an ARM processor designed for embedded deterministic real-time control, with DSP extensions and an optional single-precision floating-point unit. The Kinetis K20 sub-family specifically targets applications that need USB connectivity combined with low-power operation, sitting between entry-level Kinetis EA series and higher-end K series in the NXP MCU portfolio. USB-capable MCUs are categorized as microcontrollers with integrated USB PHY/interface, simplifying designs that require USB device or host communication.
The MK20DN128VMP5 implements an ARM Cortex-M4 core built on a low-leakage process, supporting 50 MHz operation with hardware multiply/divide and DSP instructions. The 128 KB flash is organized as 128K x 8 with ECC support; the 16 KB SRAM includes bit-band aliasing for atomic bit manipulation. The integrated USB 2.0 Full-Speed controller with on-chip transceiver eliminates the need for external PHY components, while the 16-bit SAR ADC with hardware trigger support enables precise analog measurement. Multiple low-power modes (Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx) allow designers to optimize energy consumption.
Typical applications include USB human-interface devices (HIDs), industrial control nodes, low-power sensor hubs, point-of-sale terminals, and portable medical accessories. The USB device controller with on-chip transceiver simplifies peripheral designs, while the Cortex-M4 DSP extensions enable on-chip signal processing. The compact 64 MAPBGA package suits wearables and hand-held instruments where PCB area is at a premium.
When designing with this MCU, ensure proper decoupling with 100 nF ceramic capacitors adjacent to each VDD pin and a bulk 4.7 uF capacitor on the main supply rail. The integrated USB transceiver requires precise 45 ohm/90 ohm differential routing on D+/D- for signal integrity compliance with USB 2.0 Full-Speed specifications. Configure unused pins as outputs to minimize leakage through ESD protection diodes in low-power modes.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB design notes that go beyond what is typically listed in the NXP datasheet revision history, helping engineers select the right Kinetis variant for production.
Alternatives de remplacement direct pour MK20DN128VMP5 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MK20DN128VMP5 (même facteur de forme et même empreinte) — différant par Package, ADC, Maximum CPU Frequency, Mounting Type, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MK20DX128VMP5
✅ Remplacement direct✓ En stock
$3.85 / unité
Voir la fiche technique →MK10DX128VMP5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MKL02Z32CAF4R
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MIMXRT1064CVL5A
✅ Remplacement direct✓ En stock
$6.1 / unité
Voir la fiche technique →MC9S08SE8VWL
✅ Remplacement direct✓ En stock
$2.34 / unité
Voir la fiche technique →LPC845M301JHI33
✅ Remplacement direct✓ En stock
$1.84 / unité
Voir la fiche technique →MK20DN128VMP5 Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM Cortex-M4 with FPU |
| Core Bit Width | 32-bit |
| Fréquence d'horloge maximale | 50 MHz |
| Program Flash Memory | 128 KB (128K x 8) |
| SRAM | 16 KB |
| Boîtier | 64-MAPBGA (5x5 mm) |
| USB Controller | USB 2.0 Full-Speed Device/Host/OTG with on-chip transceiver |
| ADC | 16-bit SAR, multiple channels |
| Tension d'alimentation | 1.8 V / 2.5 V / 3.3 V |
| Plage de température de fonctionnement | -40C to +105C (industrial) |
| Type de montage | Surface Mount (MAPBGA) |
| Communication Interfaces | UART, SPI, I2C, USB |
| Low-Power Modes | Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx |
| Series / Sub-Family | Kinetis K20 (K20 Sub-Family, 50 MHz) |
| Niveau MSL | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant |
Guide de configuration des broches du MK20DN128VMP5 64-mapbga (5x5 mm)
Configuration des broches du MK20DN128VMP5 (boîtier 64-mapbga (5x5 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MK20DN128VMP5.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MK20DN128VMP5 convient pour 7 applications: USB Human Interface Devices (HID), Industrial Sensor Hub and Data Logger, Portable Medical Accessories, Point-of-Sale (POS) Terminal Peripherals, IoT Edge Node with USB Debug/Provisioning, USB Audio Class Devices, Smart Home Sensor and Actuator Hub.
USB Human Interface Devices (HID)
The MK20DN128VMP5's integrated USB 2.0 Full-Speed controller with on-chip transceiver eliminates external PHY components, making it ideal for USB HID peripherals such as keyboards, mice, game controllers, and custom input devices. The Cortex-M4 core at 50 MHz executes HID class drivers and button-matrix scanning firmware with deterministic latency, while 128 KB flash accommodates USB stack plus application code. The 16 KB SRAM is sufficient for HID report buffers and small protocol stacks. Low-power modes allow bus-powered devices to meet USB suspend current requirements (under 2.5 mA) when idle. The compact 64-MAPBGA 5x5 mm package suits miniaturized peripherals like wireless presenters or wearable input devices.
Recommandé
Industrial Sensor Hub and Data Logger
The MK20DN128VMP5's 16-bit SAR ADC, multiple UART/SPI/I2C interfaces, and Cortex-M4 DSP extensions make it well-suited for industrial sensor aggregation nodes. The 50 MHz core runs sensor fusion and decimation filters in real time, while 128 KB flash stores configuration and calibration tables. Low-power modes including LLS and VLLS extend battery life in remote installations. The USB device capability simplifies configuration via direct PC connection in field-service scenarios. The 64-MAPBGA package supports compact IP65 enclosures common in industrial IoT.
Recommandé
Portable Medical Accessories
The MK20DN128VMP5 suits battery-powered medical accessories such as pulse-oximeter probes, handheld spirometers, and patient-worn event monitors. Its low-leakage process and multiple low-power modes (LLS, VLLSx) enable multi-day battery operation, while the Cortex-M4 DSP extensions accelerate ECG/RESP signal-processing algorithms. The USB device controller supports direct charging and data offload to host PCs. The 64-MAPBGA 5x5 mm footprint enables miniaturized wearable form factors. Industrial -40C to +105C temperature range supports sterilization and environmental extremes.
Recommandé
Point-of-Sale (POS) Terminal Peripherals
The MK20DN128VMP5's USB 2.0 Full-Speed device/host/OTG capability and Cortex-M4 processing performance suit POS peripherals including barcode scanners, receipt printers, and magnetic-stripe readers. Host mode allows connecting peripherals to a tablet-based POS system, while device mode enables the terminal to appear as a USB composite device to the host PC. The 128 KB flash accommodates USB class drivers and customer firmware. Multiple UART/SPI/I2C interfaces support printer mechanisms, scanner modules, and secure PIN-pad peripherals. The 5x5 mm MAPBGA package enables slim retail-terminal designs.
Recommandé
IoT Edge Node with USB Debug/Provisioning
The MK20DN128VMP5 is well-suited for IoT edge nodes that use USB for factory provisioning, firmware updates, and field debugging. The integrated USB 2.0 Full-Speed controller with on-chip transceiver eliminates external PHY cost, while the Cortex-M4 core runs application logic plus USB CDC class for virtual COM port debugging. 128 KB flash and 16 KB RAM support protocol stacks like MQTT-SN, CoAP, or vendor-proprietary edge protocols. Multiple low-power modes extend battery life in remote deployments. The 5x5 mm MAPBGA package supports dense IoT PCB layouts with wireless modules.
Recommandé
USB Audio Class Devices
The MK20DN128VMP5 supports USB Audio Class 1.0 device operation through its integrated USB 2.0 Full-Speed controller, enabling USB headsets, USB microphones, and USB speakers. The Cortex-M4 core at 50 MHz performs real-time audio sample-rate conversion and basic DSP (EQ, compression), while 128 KB flash holds USB Audio class driver and codec firmware. The 16 KB SRAM accommodates audio sample buffers (typically 4-8 KB for stereo 48 kHz). Low-latency interrupt handling preserves audio quality. The compact 64-MAPBGA 5x5 mm package enables consumer-audio product form factors.
Recommandé
Smart Home Sensor and Actuator Hub
The MK20DN128VMP5 fits smart-home hub designs that aggregate ZigBee, Z-Wave, or proprietary wireless sensors and control actuators such as relays or motor drivers. Its 50 MHz performance, 128 KB flash, and 16 KB RAM support wireless protocol stacks plus control logic. The USB host capability enables connection to Wi-Fi dongles for network connectivity. Multiple UART/SPI/I2C interfaces connect to radios and actuator driver ICs. Low-power modes support battery-operated wireless sensors with multi-year battery life. The industrial temperature range suits unheated indoor/outdoor smart-home installations.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MK20DN128VMP5 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MK20DX128VMP5 | MK10DX128VMP5 | MIMXRT1064CVL5A | LPC845M301JHI33 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-MAPBGA (5x5 mm) | 64-MAPBGA (5x5 mm) - same | 64-MAPBGA (5x5 mm) - same | 196-LFBGA | 33-HVQFN |
| Core Architecture | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M7 | ARM Cortex-M0+ |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 600 MHz | 30 MHz |
| Program Flash Memory | 128 KB | 128 KB | 128 KB | 4 MB (external flash) | 32 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 1 MB | 4 KB |
| USB Controller | USB 2.0 Full-Speed Device/Host/OTG with on-chip transceiver | USB 2.0 Full-Speed | No USB | USB 2.0 High-Speed with PHY | USB 2.0 Full-Speed |
| Supply Voltage | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 3.0 V to 3.6 V | 1.8 V to 3.6 V |
| Operating Temperature Range | -40C to +105C (industrial) | -40C to +105C | -40C to +105C | -40C to +105C (industrial) | -40C to +85C |
Principaux différenciateurs
- Integrated USB 2.0 Full-Speed transceiver eliminates external PHY (vs MK10DX128VMP5)
- 50 MHz Cortex-M4 with DSP extensions outperforms Cortex-M0+ alternatives (vs LPC845M301JHI33)
- Compact 5x5 mm MAPBGA footprint for space-constrained designs (vs MC9S08SE8VWL)
Notes de conception
Place a 100 nF ceramic decoupling capacitor adjacent to each VDD pin and a 4.7 uF bulk capacitor on the main supply rail. The MK20DN128VMP5 has multiple VDD pins (VDD, VDDINT, VDDA) that each require local decoupling. For USB operation, ensure the VREGIN and VOUT33 pins are routed per the NXP K20 reference manual with appropriate bulk capacitance. Estimated: with 5 microswitch decoupling events on a load of 50 mA active, the supply-rail ripple budget is well under 50 mVpp.
The 64-MAPBGA 5x5 mm package requires standard BGA PCB assembly with 0.5 mm or 0.8 mm ball pitch (verify exact pitch in the NXP K20 datasheet package dimensions). Use NSMD (non-solder-mask-defined) PCB land pads for improved BGA joint reliability. Via-in-pad with epoxy-filled/plugged vias is recommended for BGA escape routing. Controlled-impedance routing (90 ohm differential for USB D+/D-) is required for USB signal integrity per USB 2.0 specification.
Do not exceed the absolute maximum voltage on any I/O pin (VDD + 0.3 V). Configure unused pins as outputs driving low to minimize leakage through ESD protection diodes during low-power modes. The MK20DN128VMP5 has a built-in flash security mechanism - ensure the FSEC register is programmed correctly before mass production. Verify the K20 Sub-Family datasheet section on reset and boot configuration for proper mode-pin strapping.
For USB 2.0 Full-Speed signal integrity, route D+ and D- as a 90-ohm differential pair with length matching within 150 mil. Keep USB traces away from noisy digital signals and clock sources. Add a common-mode choke or ferrite bead on USB power lines for EMI suppression. The integrated on-chip USB transceiver eliminates external PHY but still requires careful PCB layout per USB 2.0 compliance.
The MAPBGA package has thermal performance dependent on PCB copper area and via array. Implement a thermal via array beneath the package exposed pad (if present) to dissipate heat to internal copper planes. Estimated: at 50 MHz active current consumption (~25 mA typical), the MAPBGA junction-to-ambient thermal resistance is approximately 35 C/W, well within safe operating limits for industrial environments.
Informations de conformité
RoHS and REACH compliance per NXP product information. Not AEC-Q100 qualified (industrial grade only). Lead-free reflow compatible per MSL3 / JEDEC J-STD-020.