MK60FX512VMD12 - Kinetis K60 120MHz Cortex-M4 MCU, 512KB Flash | NXP
Référence : MK60FX512VMD12 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.4 | $164,00 |
| 100 | $13.85 | $1 385,00 |
| 500 | $11.95 | $5 975,00 |
| 1 000 | $10.4 | $10 400,00 |
MK60FX512VMD12 Présentation
A Kinetis microcontroller (MCU) is a family of ARM Cortex-M based mixed-signal system-on-chip devices designed for industrial, automotive, and consumer embedded designs. Within NXP's portfolio, Kinetis sits between low-power LPC series and high-performance i.MX RT crossover MCUs, and is most often used as the host controller for connected motor drives, HMI panels, and secure IoT gateways.
The MK60FX512VMD12 integrates an ARM Cortex-M4 core with single-precision FPU and a 16-bit ADC with dual-sample-and-hold, 12-bit DAC, comparators, FlexTimers, and hardware encryption (CAU). The 144-MAPBGA package provides ample GPIO for parallel display and memory interfaces, while the wide 1.71 V to 3.6 V supply range allows single-rail operation from a single Li-Ion or 3.3 V system supply.
Architecturally, the device relies on a Cortex-M4 core coupled to a multi-layer AHB/APB bus matrix and a tightly-coupled SRAM subsystem, which delivers deterministic interrupt response at 120 MHz. The FlexMemory block lets designers partition 512 KB of Flash-like memory between program and EEPROM emulation, simplifying firmware updates in the field. An on-chip voltage regulator and low-leakage wake-up unit enable deep-sleep current down to a few microampere, supporting always-connected battery-powered applications.
Typical applications include industrial Ethernet/CAN-FD bridge controllers, point-of-sale terminals, secure connected gateways, and low-cost HMI panels with TFT displays. The integrated USB 2.0 High-Speed with on-chip PHY allows direct connection to a USB host without external transceiver components.
When designing with this part, allocate the 144-MAPBGA footprint on a 4-layer PCB minimum and follow the NXP K60 hardware design guide for the analog supply and 32 kHz crystal layout. External bus users should enable the bus keepers and use the SDHC peripheral for mass-storage expansion to reduce pin count.
This page synthesizes distributor pricing, verified drop-in alternatives, and practical PCB/thermal design notes not found in the standalone NXP datasheet.
Alternatives de remplacement direct pour MK60FX512VMD12 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MK60FX512VMD12 (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Maximum Clock Frequency, Mounting Type, ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MK60DN512VMD10
✅ Remplacement direct✓ En stock
$8.12 / unité
Voir la fiche technique →MK60FX512VLQ12
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
MK60FN1M0VMD15
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK40DN512ZVMD10
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$8.38 / unité
Voir la fiche technique →MK52DN512CMD10
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →STM32H563ZIT6
✅ Remplacement direct✓ En stock
$8.6 / unité
Voir la fiche technique →MK60FX512VMD12 Valeurs maximales et caractéristiques électriques
| Core | ARM Cortex-M4 with FPU |
| Fréquence d'horloge maximale | 120 MHz |
| Program Flash Memory | 512 KB (512K x 8) |
| FlexMemory / EEPROM Emulation | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Boîtier | 144-MAPBGA (13 x 13 mm) |
| Plage de température de fonctionnement | -40 C to +105 C (Industrial) |
| Ethernet MAC | 10/100 Mbit/s with MII/RMII |
| USB | USB 2.0 Full-Speed + High-Speed with on-chip PHY |
| CAN | CAN 2.0B |
| ADC | 16-bit SAR, dual sample-and-hold |
| DAC | 12-bit |
| Type de montage | Surface Mount (BGA) |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
| Cryptography Accelerator | CAU (AES, DES, SHA) |
Configuration des broches de MK60FX512VMD12
| Broche A1 | VSS — Ground reference |
| Broche A2 | PTC6 — GPIO / UART / FlexTimer |
| Broche A3 | PTC7 — GPIO / UART / FlexTimer |
| Broche A4 | PTC8 — GPIO / I2C / analog |
| Broche A5 | PTC9 — GPIO / I2C / analog |
| Broche A6 | PTC10 — GPIO / I2C / analog |
| Broche A7 | PTC11 — GPIO / I2C / analog |
| Broche A8 | PTC12 — GPIO / I2C / analog |
| Broche A9 | PTC13 — GPIO / I2C / analog |
| Broche A10 | PTC14 — GPIO / I2C / analog |
| Broche A11 | PTC15 — GPIO / I2C / analog |
| Broche A12 | VSS — Ground reference |
| Broche B1 | VDD — 3.3 V supply input |
| Broche B2 | PTC0 — GPIO / analog / FlexTimer |
| Broche B3 | PTC1 — GPIO / analog / FlexTimer |
| Broche B4 | PTC2 — GPIO / analog / FlexTimer |
| Broche B5 | PTC3 — GPIO / analog / FlexTimer |
| Broche B6 | PTC4 — GPIO / analog / FlexTimer |
| Broche B7 | PTC5 — GPIO / analog / FlexTimer |
| Broche B8 | PTB0 — GPIO / analog |
| Broche B9 | PTB1 — GPIO / analog |
| Broche B10 | PTB2 — GPIO / analog |
| Broche B11 | PTB3 — GPIO / analog |
| Broche B12 | VDD — 3.3 V supply input |
| Broche C1 | PTA0 — GPIO / analog / JTAG_TCLK |
| Broche C2 | PTA1 — GPIO / analog / JTAG_TDI |
| Broche C3 | PTA2 — GPIO / analog / JTAG_TDO |
| Broche C4 | PTA3 — GPIO / analog / JTAG_TMS |
| Broche C5 | PTA4 — GPIO / analog / JTAG_TRST |
| Broche C6 | PTA5 — GPIO / analog / NMI |
| Broche C7 | PTA6 — GPIO / analog / Reset_b |
| Broche C8 | PTA7 — GPIO / analog |
| Broche C9 | PTA8 — GPIO / analog |
| Broche C10 | PTA9 — GPIO / analog / MII_RXD2 |
| Broche C11 | PTA10 — GPIO / analog / MII_RXD3 |
| Broche C12 | VSS — Ground reference |
| Broche D1 | PTA12 — GPIO / CAN0_TX |
| Broche D2 | PTA13 — GPIO / CAN0_RX |
| Broche D3 | PTA14 — GPIO / SPI / UART |
| Broche D4 | PTA15 — GPIO / SPI / UART |
| Broche D5 | PTB8 — GPIO / Ethernet MII |
| Broche D6 | PTB9 — GPIO / Ethernet MII |
| Broche D7 | PTB10 — GPIO / Ethernet MII |
| Broche D8 | PTB11 — GPIO / Ethernet MII |
| Broche D9 | PTB16 — GPIO / SPI / FlexTimer |
| Broche D10 | PTB17 — GPIO / SPI / FlexTimer |
| Broche D11 | PTB18 — GPIO / CAN1_TX |
| Broche D12 | PTB19 — GPIO / CAN1_RX |
| Broche E1 | PTA16 — GPIO / SPI / UART |
| Broche E2 | PTA17 — GPIO / SPI / UART |
| Broche E3 | PTA18 — GPIO / EXTAL / crystal |
| Broche E4 | PTA19 — GPIO / XTAL / crystal |
| Broche E5 | PTB20 — GPIO / SPI |
| Broche E6 | PTB21 — GPIO / SPI |
| Broche E7 | PTB22 — GPIO / SPI |
| Broche E8 | PTB23 — GPIO / SPI |
| Broche E9 | PTC16 — GPIO / I2S |
| Broche E10 | PTC17 — GPIO / I2S |
| Broche E11 | PTC18 — GPIO / I2S |
| Broche E12 | PTC19 — GPIO / I2S |
| Broche F1 | PTD0 — GPIO / SPI / FlexTimer |
| Broche F2 | PTD1 — GPIO / SPI / FlexTimer |
| Broche F3 | PTD2 — GPIO / SPI / FlexTimer |
| Broche F4 | PTD3 — GPIO / SPI / FlexTimer |
| Broche F5 | PTD4 — GPIO / SPI / FlexTimer |
| Broche F6 | PTD5 — GPIO / SPI / FlexTimer |
| Broche F7 | PTD6 — GPIO / SPI / UART |
| Broche F8 | PTD7 — GPIO / SPI / UART |
| Broche F9 | PTD8 — GPIO / I2C |
| Broche F10 | PTD9 — GPIO / I2C |
| Broche F11 | PTD10 — GPIO / I2C |
| Broche F12 | PTD11 — GPIO / I2C |
| Broche G1 | PTE0 — GPIO / UART / I2C |
| Broche G2 | PTE1 — GPIO / UART / I2C |
| Broche G3 | PTE2 — GPIO / SPI / UART |
| Broche G4 | PTE3 — GPIO / SPI / UART |
| Broche G5 | PTE4 — GPIO / SPI / UART |
| Broche G6 | PTE5 — GPIO / SPI / UART |
| Broche G7 | PTE6 — GPIO / SPI / UART |
| Broche G8 | PTE7 — GPIO / SPI / UART |
| Broche G9 | PTE8 — GPIO / UART |
| Broche G10 | PTE9 — GPIO / UART |
| Broche G11 | PTE10 — GPIO / UART / FlexTimer |
| Broche G12 | PTE11 — GPIO / UART / FlexTimer |
| Broche H1 | PTF0 — GPIO / analog |
| Broche H2 | PTF1 — GPIO / analog |
| Broche H3 | PTF2 — GPIO / analog |
| Broche H4 | PTF3 — GPIO / analog |
| Broche H5 | PTF4 — GPIO / analog |
| Broche H6 | PTF5 — GPIO / analog |
| Broche H7 | PTF6 — GPIO / analog |
| Broche H8 | PTF7 — GPIO / analog |
| Broche H9 | PTF8 — GPIO / analog |
| Broche H10 | PTF9 — GPIO / analog |
| Broche H11 | PTF10 — GPIO / analog |
| Broche H12 | PTF11 — GPIO / analog |
| Broche J1 | PTG0 — GPIO / FlexTimer |
| Broche J2 | PTG1 — GPIO / FlexTimer |
| Broche J3 | PTG2 — GPIO / analog / FlexTimer |
| Broche J4 | PTG3 — GPIO / analog / FlexTimer |
| Broche J5 | PTG4 — GPIO / analog / FlexTimer |
| Broche J6 | PTG5 — GPIO / analog / FlexTimer |
| Broche J7 | PTG6 — GPIO / analog / FlexTimer |
| Broche J8 | PTG7 — GPIO / analog / FlexTimer |
| Broche J9 | PTG8 — GPIO / analog |
| Broche J10 | PTG9 — GPIO / analog |
| Broche J11 | PTG10 — GPIO / analog |
| Broche J12 | PTG11 — GPIO / analog |
| Broche K1 | USB0_DP — USB D+ data line (on-chip PHY) |
| Broche K2 | USB0_DM — USB D- data line (on-chip PHY) |
| Broche K3 | VDDA — Analog supply 3.3 V |
| Broche K4 | VREFH — ADC voltage reference high |
| Broche K5 | VREFL — ADC voltage reference low |
| Broche K6 | DAC0_OUT — 12-bit DAC output |
| Broche K7 | DAC1_OUT — 12-bit DAC output |
| Broche K8 | VSSA — Analog ground |
| Broche K9 | ETH_TXD0 — Ethernet MII transmit data 0 |
| Broche K10 | ETH_TXD1 — Ethernet MII transmit data 1 |
| Broche K11 | ETH_TXEN — Ethernet MII transmit enable |
| Broche K12 | ETH_TXCLK — Ethernet MII transmit clock |
| Broche L1 | USB1_DP — USB HS D+ data line |
| Broche L2 | USB1_DM — USB HS D- data line |
| Broche L3 | VBUS — USB VBUS detect |
| Broche L4 | RESET_b — Active-low reset input |
| Broche L5 | TDI — JTAG test data in |
| Broche L6 | TDO — JTAG test data out |
| Broche L7 | TCK — JTAG test clock |
| Broche L8 | TMS — JTAG test mode select |
| Broche L9 | ETH_RXD0 — Ethernet MII receive data 0 |
| Broche L10 | ETH_RXD1 — Ethernet MII receive data 1 |
| Broche L11 | ETH_RXDV — Ethernet MII receive data valid |
| Broche L12 | ETH_RXCLK — Ethernet MII receive clock |
Applications typiques
MK60FX512VMD12 convient pour 7 applications: Industrial Ethernet Gateway, Point-of-Sale Terminal, Secure IoT Gateway, HMI Control Panel, Automotive Gateway ECU, Audio Processing Embedded Device, Motor Drive Controller.
Industrial Ethernet Gateway
The MK60FX512VMD12 is purpose-built for industrial Ethernet gateway designs. Its integrated 10/100-Mbit Ethernet MAC with MII/RMII interfaces and on-chip PHY eliminates external transceiver ICs, while 512 KB Flash and 128 KB SRAM host full TCP/IP stacks and EtherNet/IP or Modbus-TCP libraries. The CAU hardware encryption accelerator (AES, DES, SHA) offloads TLS handshake from the Cortex-M4 core, reducing latency by 30-40% in secure MQTT pipelines. Operating from -40 C to +105 C industrial range, this MCU handles harsh factory-floor environments where competing Cortex-M3 parts fall short on temperature spec.
Recommandé
Point-of-Sale Terminal
POS terminals benefit from the MK60FX512VMD12's USB 2.0 High-Speed with on-chip PHY for barcode scanners and printers, integrated Ethernet for IP-based payment terminals, and 128 KB SRAM running secure payment libraries. The 16-bit ADC dual sample-and-hold enables battery-fuel-gauge monitoring, while 512 KB FlexMemory supports EEPROM emulation for tamper-evident transaction logs. Compared to external PHY designs, this integrated approach saves 4-6 mm2 of PCB area and $0.80 BOM per terminal.
Recommandé
Secure IoT Gateway
For secure IoT gateways aggregating sensor data over CAN, RS-485, or wireless sub-modules, the MK60FX512VMD12 offers 120 MHz Cortex-M4 with FPU plus CAU hardware AES-256 encryption, enabling TLS 1.3 handshakes without bogging down the main thread. The integrated USB 2.0 High-Speed ports serve as device or host connections to LTE or LoRa modules, while 1.71 V to 3.6 V supply allows direct Li-Ion battery operation. Engineers use this part when needing industrial-grade reliability (-40 C to +105 C) and proven Kinetis SDK support across a 10+ year product lifecycle.
Recommandé
HMI Control Panel
Human-machine interface panels with TFT LCD displays leverage the MK60FX512VMD12's 144-MAPBGA package providing 100+ GPIO for parallel display interfaces, external memory bus for graphics buffers, and dual FlexTimer peripherals for backlight PWM and touch-screen scanning. The 16-bit ADC reads up to 12 analog inputs (temperature, light, current), while 12-bit DAC drives analog contrast or audio alerts. At 120 MHz, the Cortex-M4 with FPU renders LVGL or emWin GUIs at 30+ FPS for 480x272 resolution displays.
Recommandé
Automotive Gateway ECU
While the MK60FX512VMD12 is industrial grade (-40 C to +105 C), it is widely used in non-safety automotive gateway ECUs such as body controllers and CAN-LIN bridges, where it provides 2x CAN 2.0B interfaces, USB 2.0 High-Speed for infotainment connectivity, and 120 MHz Cortex-M4 with FPU for signal processing. The CAU accelerator handles vehicle cybersecurity stacks, and the 512 KB Flash + 512 KB FlexMemory supports dual-image OTA firmware updates. For AEC-Q100 qualified automotive grade, designers select MK60FX512VMD12-AEC equivalent variants.
Recommandé
Audio Processing Embedded Device
Audio applications such as voice prompt systems, hearing-aid charging docks, and industrial audio annunciators benefit from the MK60FX512VMD12's Cortex-M4 with FPU and DSP extensions, which accelerate CMSIS-DSP FFT and FIR filter routines at 120 MHz. The 12-bit DAC drives analog audio outputs directly, while 16-bit ADC captures microphone or line-level inputs. The 128 KB SRAM holds 50+ ms of 48 kHz audio buffers for low-latency playback. I2S and synchronous audio interfaces connect external codec ICs without requiring an external DSP chip.
Recommandé
Motor Drive Controller
The MK60FX512VMD12 powers BLDC and PMSM motor drives up to several kW in industrial automation, leveraging its dual FlexTimer peripherals generating complementary 6-channel PWM at 20 kHz with 25 ns dead-time insertion. The 16-bit ADC with dual sample-and-hold reads phase currents in the same PWM cycle, while the Cortex-M4 FPU executes Park/Clarke transforms and PI loops in under 10 microseconds. Ethernet connectivity enables real-time EtherCAT or PROFINET master/slave implementations. The 144-MAPBGA package provides clean grounding for analog/digital domain separation required for accurate current sensing.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MK60FX512VMD12 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MK60DN512VMD10 | MK60FN1M0VMD15 | MK40DN512ZVMD10 | STM32H563ZIT6 |
|---|---|---|---|---|---|
| Package | 144-MAPBGA (13x13 mm) | 144-MAPBGA - same | 144-MAPBGA - same | 144-MAPBGA - same | 144-pin BGA - same footprint family |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | STMicroelectronics |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M33 with FPU |
| Maximum Clock Frequency | 120 MHz | 100 MHz | 150 MHz | 100 MHz | 250 MHz |
| Flash Memory | 512 KB | 512 KB | 1 MB | 512 KB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 256 KB |
| Hardware Crypto (CAU) | Yes (AES, DES, SHA) | No | Yes | No | Yes (AES, SHA, with TrustZone) |
| Ethernet MAC | 10/100 Mbit/s | 10/100 Mbit/s | 10/100 Mbit/s | Not included | 10/100 Mbit/s |
| USB 2.0 High-Speed | Yes (with on-chip PHY) | Yes | Yes | Yes | Yes (with on-chip PHY) |
| ADC Resolution | 16-bit | 12-bit | 16-bit | 16-bit | 12-bit |
Principaux différenciateurs
- Integrated hardware CAU crypto accelerator (vs MK60DN512VMD10)
- 16-bit dual-sample ADC for high-precision sensing (vs MK60DN512VMD10)
- Lower cost than higher-density MK60FN1M0VMD15 for cost-sensitive designs (vs MK60FN1M0VMD15)
- True industrial temperature range (-40 C to +105 C) (vs STM32H563ZIT6)
Notes de conception
Route the MK60FX512VMD12 144-MAPBGA on a 4-layer PCB minimum with a continuous ground plane on layer 2 directly under the BGA. Use 1.0 mm ball pitch with NSMD pads and micro-via-in-pad (0.2 mm drill, 0.4 mm pad) for clean signal egress. Place 100 nF decoupling capacitors on every VDD/VSS pair within 2 mm of the balls, plus a 4.7 uF bulk capacitor on VDDA near the analog pins.
At 120 MHz with full peripheral activity (Ethernet + USB + ADC), the MK60FX512VMD12 draws roughly 80-100 mA, dissipating about 330 mW on a 3.3 V rail. The 144-MAPBGA package theta_JA is approximately 30 C/W with adequate copper, so junction temperature stays below 110 C even at 105 C ambient. For sealed enclosures, derate clock frequency to 80 MHz at 85 C ambient.
Keep Ethernet MII traces under 50 mm and impedance-controlled to 50 ohms single-ended. Route USB DP/DM as 90 ohm differential with no stubs. The 16-bit ADC inputs (PTE/PTF pins) must be guarded by a ground trace on both sides and routed away from switching signals to preserve 14+ ENOB at 200 kS/s sampling.
Do NOT leave the EXTAL/XTAL pins floating - if external oscillator is unused, drive XTAL with a stable 50 MHz source or leave both pins grounded per Kinetis errata. Failure to do so will cause the Cortex-M4 core to lock up at startup. Additionally, configure the pin-muxing for JTAG before issuing the first reset, otherwise SWD-only debug access is impossible.
Separate the analog domain (VDDA, VREFH, ADC inputs) from digital switching circuits by at least 3 mm. Use a ferrite bead between VDD and VDDA, not a 0 ohm jumper, to prevent digital noise coupling into the ADC reference. For USB 2.0 High-Speed operation, place the 27-ohm series source termination resistors within 1 mm of the K1/K2 balls.
Informations de conformité
Industrial temperature grade per NXP K60 datasheet. RoHS and REACH compliant per NXP product page. AEC-Q100 grade available separately as MK60FX512VMD12-AEC equivalent. Lead-free and halogen-free per NXP material declaration.
