NXP Semiconductors

MKL27Z32VLH4 - 48MHz Cortex-M0+ 32KB USB MCU | NXP

Référence : MKL27Z32VLH4 ✓ Actif
1.8 V, 2.5 V, or 3.3 V Vdss 64-LQFP (10 x 10 mm) Package 48 MHz Speed 32 KB (32K x 8) Memory
MOQ : 1 |

MKL27Z32VLH4 Présentation

The NXP Semiconductors MKL27Z32VLH4 is a 32-bit ARM Cortex-M0+ Kinetis KL2 ultra-low-power microcontroller operating at up to 48 MHz, with 32 KB of flash memory and a 64-LQFP 10 x 10 mm package. It integrates USB connectivity for portable and connected embedded systems. The Kinetis KL2 family adds full-speed USB 2.0 On-The-Go or crystal-less USB device functionality to the low-power Kinetis KL1 architecture.

A microcontroller is a programmable system-on-chip that combines a processor core, flash program memory, RAM, peripheral interfaces, and clock circuitry on one integrated device. The MKL27Z32VLH4 belongs to the hierarchy ARM Cortex-M0+ microcontroller, embedded processor, microcontroller, semiconductor, and integrated circuit. Its 32-bit architecture supports efficient control-loop and event-processing workloads while retaining the simple instruction set and low power requirements associated with small embedded systems.

Key features include an ARM Cortex-M0+ core running at 48 MHz, 32 KB of flash, USB connectivity, crystal-less USB operation, and operation from 1.8 V, 2.5 V, or 3.3 V supply levels. The Kinetis KL2x family also provides migration compatibility with Kinetis K20 devices based on the ARM Cortex-M4 core and with other Kinetis KL1x, KL2x, KL3x, and KL4x microcontrollers, helping simplify product-line development and firmware reuse.

Typical applications include USB-connected data loggers, wearable and portable devices, human-interface controllers, compact sensor nodes, industrial accessory modules, and embedded systems that require more USB capability than the KL1 series without moving to a higher-performance Cortex-M4 core. The 64-LQFP package also exposes more I/O than small QFN options, which can simplify routing in designs that need external connectors, status indicators, or multiple peripheral signals.

When laying out the PCB, place decoupling capacitors close to the supply pins and keep USB signal routing short, controlled, and referenced to a continuous ground plane. Confirm the exact pin multiplexing, decoupling values, and clock requirements against the NXP datasheet and reference design before releasing the layout. Crystal-less USB operation reduces external component count but still requires correct internal-clock and USB transceiver configuration.

This page consolidates the verified product identity, package information, USB capabilities, and power-range details into a practical engineering reference. It also compares drop-in same-package options and explains where flash capacity, USB functionality, and firmware configuration determine the correct replacement choice.

Alternatives de remplacement direct pour MKL27Z32VLH4 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MKL27Z32VLH4 (même facteur de forme et même empreinte) — différant par Package, Communication Interfaces, Core Architecture, Low-Power Modes, Program Flash Memory.

NXP Semiconductors
Package: 64-pin LQFP (10 x 10 mm)
Communication Interfaces: LPUART, UART, SPI, I2C, USB
Core Architecture: ARM 32-bit
Comparer avec MKL27Z32VLH4 →
NXP Semiconductors
Package: 64-pin LQFP (10x10 mm)
Communication Interfaces: UART, SPI, I2C, USB
Core Architecture: ARM Cortex-M0+ (32-bit)
Comparer avec MKL27Z32VLH4 →

MKL27Z64VLH4

✅ Remplacement direct
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M0+ (32-bit) · 48 MHz · 64 KB · 8 KB · 64-pin LQFP (10x10 mm) · Surface Mount · 1.71 V to 3.6 V · USB 2.0 Full-Speed Device (crystal-less)

Contactez-nous pour le prix

Voir la fiche technique →

MKL27Z128VLH4

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 64-LQFP (10 x 10 mm)
Flash memory increases from 32 KB to 128 KB, a 96 KB or 300% increase; same 48 MHz Cortex-M0+ Kinetis KL2 platform

📋 Alternative de référence (hors catalogue)

MKL26Z64VLH4

✅ Remplacement direct ⚠️ Spécifications non vérifiées
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
32-bit ultra-low-power microcontroller · NXP Semiconductors · Kinetis KL2x · Arm Cortex-M0+ · 48 MHz · 32-bit · 64 KB · 64K x 8

Contactez-nous pour le prix

Voir la fiche technique →

MKL26Z32VLH4

✅ Remplacement direct ⚠️ Spécifications non vérifiées
NXP Semiconductors
📦 64-LQFP (10 x 10 mm)
ARM Cortex-M0+ · ARM 32-bit · 48 MHz · 32 KB (32K x 8) · 4 KB · USB 2.0 Full-Speed (OTG or Device, crystal-less option) · 64-pin LQFP (10 x 10 mm) · VLH4 (LQFP-64)

Contactez-nous pour le prix

Voir la fiche technique →

MKL27Z32VLH4 Valeurs maximales et caractéristiques électriques

Manufacturer NXP Semiconductors
Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family Kinetis KL2
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
Core ARM Cortex-M0+
Bit Width 32-bit
USB Connectivity USB 2.0
Crystal-Less USB Operation Supported
Operating Supply Levels 1.8 V, 2.5 V, or 3.3 V
Boîtier 64-LQFP (10 x 10 mm)
Type de montage Surface Mount
Shipping Format Tray
Statut du cycle de vie Active

Guide de configuration des broches du MKL27Z32VLH4 64-lqfp (10 x 10 mm)

Configuration des broches du MKL27Z32VLH4 (boîtier 64-lqfp (10 x 10 mm)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 64-lqfp (10 x 10 mm) pour le MKL27Z32VLH4

Aucune donnée de brochage détaillée disponible pour MKL27Z32VLH4.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MKL27Z32VLH4 convient pour 6 applications: USB Portable Data Logger, USB Connected Sensor Node, Human Interface Controller, Industrial Accessory Module, Low-Power Wearable Controller, USB Communication Adapter.

📱

USB Portable Data Logger

The MKL27Z32VLH4 fits a portable USB data logger whose application code remains below the 32 KB flash limit. Its 48 MHz ARM Cortex-M0+ core can service sensor sampling, event timestamping, and USB data-transfer tasks, while USB 2.0 connectivity removes the need for a separate interface controller. Crystal-less USB operation can also reduce external clock-component count. The 1.8 V, 2.5 V, or 3.3 V supply options allow the device to share a rail with low-energy portable electronics. Before finalizing the design, confirm that the complete logger firmware, USB descriptors, and buffering strategy fit within 32 KB; otherwise select a larger-flash KL27 variant.

🧩

USB Connected Sensor Node

The MKL27Z32VLH4 is appropriate for a compact USB-connected sensor node that combines environmental or condition sensing with a direct host interface. The 48 MHz ARM Cortex-M0+ core provides enough performance for acquisition, filtering, and threshold handling, while the integrated USB capability supports enumeration and configuration without an external bridge. Operating at 1.8 V, 2.5 V, or 3.3 V lets the designer align the MCU with the sensor and regulator design. Keep USB routing short and preserve a continuous ground reference, and confirm the exact analog-pin assignments and USB clock configuration in the NXP data sheet before layout release.

🔧

Human Interface Controller

The MKL27Z32VLH4 can implement a USB keyboard, control panel, or configuration interface where the firmware footprint remains below 32 KB. Its 48 MHz Cortex-M0+ core supports debouncing, key scanning, LED control, and USB report generation, while the 64-LQFP package provides a generous number of external pins for switches, indicators, and communication lines. USB 2.0 and crystal-less operation simplify peripheral integration compared with a design that requires a separate USB interface device. Validate debounce timing, HID descriptors, and low-power wake behavior in the manufacturer reference design, and use the larger-flash family member when HID reports and complex key-map processing exceed the 32 KB budget.

🏭

Industrial Accessory Module

The MKL27Z32VLH4 supports compact industrial accessory modules that use USB for configuration, diagnostics, or firmware recovery. Its ultra-low-power Kinetis KL2 platform is useful where the module must idle between service intervals, and the 48 MHz core provides ample throughput for protocol handling and local status monitoring. The 64-LQFP package exposes more pins than a small QFN package, easing connection to transceivers, status LEDs, and service headers. Design the USB interface for controlled-impedance routing, place the required bypass capacitors adjacent to the device, and verify the module's supply range and suspend current against the intended industrial environment.

📱

Low-Power Wearable Controller

The MKL27Z32VLH4 is suitable for a wearable controller that performs light sensor fusion, user-input handling, and USB charging or configuration duties within a 32 KB firmware budget. Support for 1.8 V and 2.5 V operation enables integration with low-voltage sensors, while the Kinetis KL2 family's ultra-low-power positioning is advantageous for battery-operated designs. Crystal-less USB can reduce component count when the USB clock implementation has been validated. Measure standby and active current in the final board because peripherals, pull resistors, and regulators determine the system-level consumption, and verify that firmware updates can be delivered through the chosen USB configuration.

🌐

USB Communication Adapter

The MKL27Z32VLH4 can serve as the controller in a USB communication adapter that translates between a USB host and an internal serial or control interface. The 48 MHz Cortex-M0+ core handles USB transactions and packet processing, while the 64-LQFP package provides pins for bridging, status indication, and configuration. USB 2.0 integration allows the adapter to avoid a separate USB bridge IC, but firmware must include the required class, descriptor, and enumeration behavior. Validate sustained transfer rates, suspend behavior, and bus-powered current in system tests, and choose a larger-flash KL27 part if protocol translation and bootloader functions require more than 32 KB.

What is the MKL27Z32VLH4 microcontroller?
The MKL27Z32VLH4 is an active NXP Semiconductors Kinetis KL2 ultra-low-power microcontroller built around a 32-bit ARM Cortex-M0+ core. It runs at up to 48 MHz, provides 32 KB of flash, and includes USB 2.0 connectivity in a 64-LQFP package measuring 10 x 10 mm. According to the NXP product information, the part belongs to the Kinetis KL2x family designed for portable and USB-connected embedded systems.
What are the key specifications of MKL27Z32VLH4 that engineers should know?
The MKL27Z32VLH4 combines a 48 MHz ARM Cortex-M0+ core, 32 KB of flash memory, USB 2.0 connectivity, and crystal-less USB operation in a 64-LQFP 10 x 10 mm package. Its identified operating supply levels are 1.8 V, 2.5 V, and 3.3 V. NXP describes the Kinetis KL2x family as an ultra-low-power MCU family that adds full-speed USB OTG or crystal-less USB device functionality to the Kinetis KL1 series.
Where can I download the MKL27Z32VLH4 datasheet PDF?
Download the MKL27Z32VLH4 documentation from the NXP part page at https://www.nxp.com/part/MKL27Z32VLH4, where the manufacturer lists the product as active and links to its data sheet. The NXP document contains the authoritative 64-pin descriptions, memory map, electrical characteristics, USB configuration, clocking, and package drawings. Use the NXP document for layout and firmware decisions rather than third-party document mirrors.
Where can I find the MKL27Z32VLH4 pinout?
The MKL27Z32VLH4 pinout is documented in the pin-connection section of the NXP Kinetis KL27 data sheet linked from the manufacturer's product page. The device is supplied in a 64-LQFP 10 x 10 mm package, but pin multiplexing depends on the selected peripheral and configuration. Use the NXP pin-description table when assigning PCB nets, particularly for USB, debug, clock, reset, analog, and communication functions.
What is the difference between MKL27Z32VLH4 and MKL27Z64VLH4?
Both devices use the same 64-LQFP Kinetis KL27 family platform, but MKL27Z64VLH4 provides 64 KB of flash instead of the 32 KB offered by the MKL27Z32VLH4. The larger flash device gives firmware and data storage more headroom, while the 32 KB part is appropriate when the application code fits comfortably within its smaller memory budget. Both retain the 48 MHz ARM Cortex-M0+ core and USB capability.
Can MKL27Z64VLH4 replace MKL27Z32VLH4 as a drop-in part?
The MKL27Z64VLH4 is the closest same-package upgrade for the MKL27Z32VLH4 because both are 64-LQFP Kinetis KL27 devices with the same CPU frequency and USB platform. The defining difference is flash capacity: 64 KB versus 32 KB, a 32 KB increase. Confirm the exact board footprint, pin multiplexing, and firmware memory map against the NXP documentation before treating the change as a drop-in replacement.
What is the best drop-in replacement for MKL27Z32VLH4?
The MKL27Z64VLH4 is the best supported drop-in candidate in the same 64-LQFP Kinetis KL27 package because it retains the 48 MHz ARM Cortex-M0+ core and USB connectivity while doubling flash from 32 KB to 64 KB. It is suitable when firmware grows beyond 32 KB but the existing PCB and application architecture remain unchanged. Verify device revision, pin multiplexing, and firmware build settings during the substitution.
When should I choose MKL27Z32VLH4 over a larger Kinetis KL27?
Choose the MKL27Z32VLH4 when a fixed application, firmware image, or cost target is known to fit within 32 KB of flash and the same-package 64-LQFP route is already proven. A larger flash variant becomes preferable when code growth, data logging, boot-management logic, or future feature expansion could exhaust the 32 KB budget. Both approaches preserve the 48 MHz Cortex-M0+ performance class and the Kinetis KL2 USB feature set.
Is MKL27Z32VLH4 suitable for a portable USB sensor node?
The MKL27Z32VLH4 is suitable for a portable USB sensor node when the firmware fits within 32 KB and the design benefits from low-power operation, USB connectivity, and crystal-less USB support. The NXP product page identifies operation at 1.8 V, 2.5 V, or 3.3 V, supporting both low-voltage and conventional 3.3 V rails. Validate the USB clocking configuration and low-power modes for the selected board.
Is MKL27Z32VLH4 suitable for a USB data logger?
Yes, the MKL27Z32VLH4 fits USB data-logger designs whose firmware remains within the 32 KB flash limit. Its 48 MHz ARM Cortex-M0+ core provides deterministic control and data handling, while the integrated USB 2.0 capability reduces the need for an external host controller. If stored buffers or application code exceed 32 KB, move to a same-package device with greater flash rather than adding external storage complexity.
What can replace the MKL27Z32VLH4?
The MKL27Z64VLH4 can replace the MKL27Z32VLH4 when the existing PCB uses the 64-LQFP footprint and the additional 32 KB of flash is acceptable. It preserves the 48 MHz ARM Cortex-M0+ core and Kinetis KL2 USB platform. A Microchip or STMicroelectronics device may provide similar functionality, but it is not treated as a pin-for-pin substitute unless its complete package and peripheral assignments are independently verified.
Is MKL27Z32VLH4 the same as MKL27Z64VLH4?
The MKL27Z32VLH4 and MKL27Z64VLH4 are closely related but not identical: they differ in flash capacity at 32 KB versus 64 KB. Their shared 64-LQFP Kinetis KL27 platform, 48 MHz ARM Cortex-M0+ core, and USB capability make the 64 KB device a practical same-package upgrade. They should not be treated as identical for memory budgeting, bill-of-materials cost, or firmware certification.
Where can I buy MKL27Z32VLH4 online?
Use the Request a Quote form on this page to request MKL27Z32VLH4 pricing, current stock, minimum order quantity, and lead time for the 64-LQFP tray configuration. The manufacturer lists the device as active, but quote-based sourcing is required to confirm allocation, date codes, and delivery timing for a specific production quantity. Packaging options such as tray or tape-and-reel should be specified during the request.
What is the price of the MKL27Z32VLH4?
The MKL27Z32VLH4 price depends on order quantity, packaging, date code, and current factory allocation. Submit the MPN and required quantity through the Request a Quote form on this page for a current quotation. NXP lists the MKL27Z32VLH4 as an active product, so the request can be evaluated against current production and distribution availability without relying on an outdated catalog figure.
What is the lead time for MKL27Z32VLH4?
Request the current MKL27Z32VLH4 lead time through the Request a Quote form on this page and include your required quantity, target date, and acceptable packaging. Because the manufacturer identifies the part as active, the quotation can reflect current production status and allocation. NXP product-change notices and supply conditions should be reviewed alongside the quotation before the purchase order is released.

Données de référence d'ingénierie pour MKL27Z32VLH4 — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MKL27Z32VLH4 when the application is a compact USB-capable design, its final firmware comfortably fits within 32 KB, and the board already uses the 64-LQFP 10 x 10 mm footprint. Its 48 MHz ARM Cortex-M0+ core, USB 2.0 connectivity, crystal-less USB operation, and selectable 1.8 V, 2.5 V, or 3.3 V supply levels make it well suited to portable accessories, sensor nodes, and service interfaces.

Choose the MKL27Z64VLH4 when firmware growth is expected or a 32 KB boundary would restrict feature development; it preserves the package and USB platform while doubling flash. Choose the MKL27Z128VLH4 when code size, data storage, or future boot and update functions require substantially more memory. Use a KL26-family device only when USB functionality is unnecessary and the designer has confirmed that the remaining peripheral assignments and firmware architecture are acceptable. No cross-brand part is recommended as a true drop-in substitute without a full board-level pin, electrical, and firmware audit.

Comparaison avec les alternatives

Paramètre Ce produit MKL27Z64VLH4 MKL27Z128VLH4 MKL26Z64VLH4 MKL26Z32VLH4
Package 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm) 64-LQFP (10 x 10 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Family Kinetis KL2 Kinetis KL2 Kinetis KL2 Kinetis KL26 Kinetis KL26
CPU Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB 64 KB 128 KB 64 KB 32 KB
USB Connectivity USB 2.0 with crystal-less USB operation USB 2.0 with crystal-less USB operation USB 2.0 with crystal-less USB operation No KL2 USB feature set No KL2 USB feature set
Operating Supply Levels 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V 1.8 V, 2.5 V, or 3.3 V

Principaux différenciateurs

  • Provides USB 2.0 and crystal-less operation within an ultra-low-power Kinetis KL2 platform (vs MKL26Z64VLH4)
  • Maintains the same 48 MHz Cortex-M0+ performance class while offering more memory headroom (vs MKL27Z64VLH4)
  • Matches the original part's flash capacity while retaining the 64-LQFP footprint (vs MKL26Z32VLH4)
  • Offers a substantial firmware-expansion path without changing the board package (vs MKL27Z128VLH4)

Notes de conception

Route the USB interface as a controlled-impedance differential pair on the NXP reference layout, keep the trace length between the transceiver and connector as short as practical, and provide a continuous ground reference beneath the pair. Place the required bypass capacitors directly beside the corresponding device supply pins rather than distributing them around the board. The LQFP footprint also requires adequate solder-paste coverage and thermal relief for reliable assembly across all 64 leads.

Select the supply rail from the supported 1.8 V, 2.5 V, or 3.3 V options and confirm that every attached peripheral shares a compatible voltage domain. Decouple the MCU close to its supply pins, and keep analog and digital return currents separated as far as the board area allows. Crystal-less USB reduces external clock count but does not remove the need for correct internal clock calibration and USB transceiver configuration.

Do not treat a larger-flash device as an automatic software-compatible substitution. Before moving from the 32 KB MKL27Z32VLH4 to a 64 KB or 128 KB variant, verify the linker memory configuration, bootloader address assumptions, USB descriptor placement, and application image size. Similarly, a KL26-family alternative lacks the KL2 USB feature set and requires USB firmware and hardware review even when the package is identical.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The manufacturer lists MKL27Z32VLH4 as active. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements against the current NXP product documentation and the exact orderable variant.

Données vérifiées le : 2026-11-19 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MKL27Z32VLH4 MKL27Z32VLH4 datasheet MKL27Z32VLH4 datasheet pdf MKL27Z32VLH4 pinout MKL27Z32VLH4 equivalent MKL27Z32VLH4 replacement MKL27Z32VLH4 price MKL27Z32VLH4 stock NXP MKL27Z32VLH4 MKL27Z32VLH4 vs MKL27Z64VLH4 MKL27Z32VLH4 64-LQFP footprint MKL27Z32VLH4 USB microcontroller MKL27Z32VLH4 48MHz Cortex-M0+ MKL27Z32VLH4 crystal-less USB

Composants & termes associés

NXP Semiconductors MKL27Z32VLH4 MKL27Z64VLH4 MKL27Z128VLH4 MKL26Z64VLH4 MKL26Z32VLH4 Kinetis KL2 Kinetis KL26 ARM Cortex-M0+ ARM Cortex-M4 microcontroller embedded processor integrated circuit semiconductor USB 2.0 USB On-The-Go crystal-less USB LQFP-64 surface-mount package 32 KB flash 48 MHz clock 1.8 V operation 2.5 V operation 3.3 V operation portable electronics
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ