MKL27Z32VLH4 - 48MHz Cortex-M0+ 32KB USB MCU | NXP
부품 번호: MKL27Z32VLH4 ✓ 활성MKL27Z32VLH4 개요
A microcontroller is a programmable system-on-chip that combines a processor core, flash program memory, RAM, peripheral interfaces, and clock circuitry on one integrated device. The MKL27Z32VLH4 belongs to the hierarchy ARM Cortex-M0+ microcontroller, embedded processor, microcontroller, semiconductor, and integrated circuit. Its 32-bit architecture supports efficient control-loop and event-processing workloads while retaining the simple instruction set and low power requirements associated with small embedded systems.
Key features include an ARM Cortex-M0+ core running at 48 MHz, 32 KB of flash, USB connectivity, crystal-less USB operation, and operation from 1.8 V, 2.5 V, or 3.3 V supply levels. The Kinetis KL2x family also provides migration compatibility with Kinetis K20 devices based on the ARM Cortex-M4 core and with other Kinetis KL1x, KL2x, KL3x, and KL4x microcontrollers, helping simplify product-line development and firmware reuse.
Typical applications include USB-connected data loggers, wearable and portable devices, human-interface controllers, compact sensor nodes, industrial accessory modules, and embedded systems that require more USB capability than the KL1 series without moving to a higher-performance Cortex-M4 core. The 64-LQFP package also exposes more I/O than small QFN options, which can simplify routing in designs that need external connectors, status indicators, or multiple peripheral signals.
When laying out the PCB, place decoupling capacitors close to the supply pins and keep USB signal routing short, controlled, and referenced to a continuous ground plane. Confirm the exact pin multiplexing, decoupling values, and clock requirements against the NXP datasheet and reference design before releasing the layout. Crystal-less USB operation reduces external component count but still requires correct internal-clock and USB transceiver configuration.
This page consolidates the verified product identity, package information, USB capabilities, and power-range details into a practical engineering reference. It also compares drop-in same-package options and explains where flash capacity, USB functionality, and firmware configuration determine the correct replacement choice.
드롭인 대체품: MKL27Z32VLH4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MKL27Z32VLH4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Communication Interfaces, Core Architecture, Low-Power Modes, Program Flash Memory.
MKL27Z64VLH4
✅ 드롭인가격 문의
데이터시트 보기 →MKL27Z128VLH4
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MKL26Z64VLH4
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MKL26Z32VLH4
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MKL27Z32VLH4 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors |
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | Kinetis KL2 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Core | ARM Cortex-M0+ |
| Bit Width | 32-bit |
| USB Connectivity | USB 2.0 |
| Crystal-Less USB Operation | Supported |
| Operating Supply Levels | 1.8 V, 2.5 V, or 3.3 V |
| 패키지 | 64-LQFP (10 x 10 mm) |
| 실장 유형 | Surface Mount |
| Shipping Format | Tray |
| 수명 주기 상태 | Active |
MKL27Z32VLH4 64-lqfp (10 x 10 mm) 핀 구성 가이드
MKL27Z32VLH4(64-lqfp (10 x 10 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MKL27Z32VLH4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MKL27Z32VLH4 적합 용도: 6 애플리케이션s: USB Portable Data Logger, USB Connected Sensor Node, Human Interface Controller, Industrial Accessory Module, Low-Power Wearable Controller, USB Communication Adapter.
USB Portable Data Logger
The MKL27Z32VLH4 fits a portable USB data logger whose application code remains below the 32 KB flash limit. Its 48 MHz ARM Cortex-M0+ core can service sensor sampling, event timestamping, and USB data-transfer tasks, while USB 2.0 connectivity removes the need for a separate interface controller. Crystal-less USB operation can also reduce external clock-component count. The 1.8 V, 2.5 V, or 3.3 V supply options allow the device to share a rail with low-energy portable electronics. Before finalizing the design, confirm that the complete logger firmware, USB descriptors, and buffering strategy fit within 32 KB; otherwise select a larger-flash KL27 variant.
추천
USB Connected Sensor Node
The MKL27Z32VLH4 is appropriate for a compact USB-connected sensor node that combines environmental or condition sensing with a direct host interface. The 48 MHz ARM Cortex-M0+ core provides enough performance for acquisition, filtering, and threshold handling, while the integrated USB capability supports enumeration and configuration without an external bridge. Operating at 1.8 V, 2.5 V, or 3.3 V lets the designer align the MCU with the sensor and regulator design. Keep USB routing short and preserve a continuous ground reference, and confirm the exact analog-pin assignments and USB clock configuration in the NXP data sheet before layout release.
추천
Human Interface Controller
The MKL27Z32VLH4 can implement a USB keyboard, control panel, or configuration interface where the firmware footprint remains below 32 KB. Its 48 MHz Cortex-M0+ core supports debouncing, key scanning, LED control, and USB report generation, while the 64-LQFP package provides a generous number of external pins for switches, indicators, and communication lines. USB 2.0 and crystal-less operation simplify peripheral integration compared with a design that requires a separate USB interface device. Validate debounce timing, HID descriptors, and low-power wake behavior in the manufacturer reference design, and use the larger-flash family member when HID reports and complex key-map processing exceed the 32 KB budget.
추천
Industrial Accessory Module
The MKL27Z32VLH4 supports compact industrial accessory modules that use USB for configuration, diagnostics, or firmware recovery. Its ultra-low-power Kinetis KL2 platform is useful where the module must idle between service intervals, and the 48 MHz core provides ample throughput for protocol handling and local status monitoring. The 64-LQFP package exposes more pins than a small QFN package, easing connection to transceivers, status LEDs, and service headers. Design the USB interface for controlled-impedance routing, place the required bypass capacitors adjacent to the device, and verify the module's supply range and suspend current against the intended industrial environment.
추천
Low-Power Wearable Controller
The MKL27Z32VLH4 is suitable for a wearable controller that performs light sensor fusion, user-input handling, and USB charging or configuration duties within a 32 KB firmware budget. Support for 1.8 V and 2.5 V operation enables integration with low-voltage sensors, while the Kinetis KL2 family's ultra-low-power positioning is advantageous for battery-operated designs. Crystal-less USB can reduce component count when the USB clock implementation has been validated. Measure standby and active current in the final board because peripherals, pull resistors, and regulators determine the system-level consumption, and verify that firmware updates can be delivered through the chosen USB configuration.
추천
USB Communication Adapter
The MKL27Z32VLH4 can serve as the controller in a USB communication adapter that translates between a USB host and an internal serial or control interface. The 48 MHz Cortex-M0+ core handles USB transactions and packet processing, while the 64-LQFP package provides pins for bridging, status indication, and configuration. USB 2.0 integration allows the adapter to avoid a separate USB bridge IC, but firmware must include the required class, descriptor, and enumeration behavior. Validate sustained transfer rates, suspend behavior, and bus-powered current in system tests, and choose a larger-flash KL27 part if protocol translation and bootloader functions require more than 32 KB.
추천
추천 제품 요약
엔지니어링 참조 데이터: MKL27Z32VLH4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
Choose the MKL27Z64VLH4 when firmware growth is expected or a 32 KB boundary would restrict feature development; it preserves the package and USB platform while doubling flash. Choose the MKL27Z128VLH4 when code size, data storage, or future boot and update functions require substantially more memory. Use a KL26-family device only when USB functionality is unnecessary and the designer has confirmed that the remaining peripheral assignments and firmware architecture are acceptable. No cross-brand part is recommended as a true drop-in substitute without a full board-level pin, electrical, and firmware audit.
대체품과의 비교
| 파라미터 | 이 제품 | MKL27Z64VLH4 | MKL27Z128VLH4 | MKL26Z64VLH4 | MKL26Z32VLH4 |
|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Family | Kinetis KL2 | Kinetis KL2 | Kinetis KL2 | Kinetis KL26 | Kinetis KL26 |
| CPU Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 64 KB | 128 KB | 64 KB | 32 KB |
| USB Connectivity | USB 2.0 with crystal-less USB operation | USB 2.0 with crystal-less USB operation | USB 2.0 with crystal-less USB operation | No KL2 USB feature set | No KL2 USB feature set |
| Operating Supply Levels | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V | 1.8 V, 2.5 V, or 3.3 V |
주요 차별점
- Provides USB 2.0 and crystal-less operation within an ultra-low-power Kinetis KL2 platform (vs MKL26Z64VLH4)
- Maintains the same 48 MHz Cortex-M0+ performance class while offering more memory headroom (vs MKL27Z64VLH4)
- Matches the original part's flash capacity while retaining the 64-LQFP footprint (vs MKL26Z32VLH4)
- Offers a substantial firmware-expansion path without changing the board package (vs MKL27Z128VLH4)
설계 노트
Route the USB interface as a controlled-impedance differential pair on the NXP reference layout, keep the trace length between the transceiver and connector as short as practical, and provide a continuous ground reference beneath the pair. Place the required bypass capacitors directly beside the corresponding device supply pins rather than distributing them around the board. The LQFP footprint also requires adequate solder-paste coverage and thermal relief for reliable assembly across all 64 leads.
Select the supply rail from the supported 1.8 V, 2.5 V, or 3.3 V options and confirm that every attached peripheral shares a compatible voltage domain. Decouple the MCU close to its supply pins, and keep analog and digital return currents separated as far as the board area allows. Crystal-less USB reduces external clock count but does not remove the need for correct internal clock calibration and USB transceiver configuration.
Do not treat a larger-flash device as an automatic software-compatible substitution. Before moving from the 32 KB MKL27Z32VLH4 to a 64 KB or 128 KB variant, verify the linker memory configuration, bootloader address assumptions, USB descriptor placement, and application image size. Similarly, a KL26-family alternative lacks the KL2 USB feature set and requires USB firmware and hardware review even when the package is identical.
규정 준수 정보
The manufacturer lists MKL27Z32VLH4 as active. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements against the current NXP product documentation and the exact orderable variant.