Texas Instruments

MSP430F2112IPW - 16MHz 16-Bit MCU with 2KB Flash | Texas Instruments

Référence : MSP430F2112IPW ✓ Actif
2.5 V or 3.3 V Vdss 28-pin TSSOP Package 16 MHz Speed 2 KB Memory
MOQ : 1 |

MSP430F2112IPW Présentation

The Texas Instruments MSP430F2112IPW is a 16 MHz, 16-bit ultra-low-power mixed-signal microcontroller with 2 KB of Flash memory, 256 B of SRAM, a 10-bit ADC, and a comparator in a 28-pin TSSOP package. It also provides I2C, SPI, and UART connectivity for embedded measurement and control systems.

A mixed-signal microcontroller combines a microcontroller core, analog conversion, and communication peripherals into one device. The MSP430 family uses a 16-bit RISC CPU, 16-bit registers, and five low-power modes optimized for portable measurement. This architecture gives designers a compact platform for acquiring sensor data, controlling actuators, and communicating with a host or other embedded equipment.

The MSP430F2112IPW combines a 16 MHz maximum clock frequency with 2 KB of Flash and 256 B of SRAM. Its 10-bit ADC supports analog measurement, while the comparator supports threshold-based sensing. I2C, SPI, and UART interfaces provide flexible options for connecting sensors, displays, data loggers, and external converters without requiring separate interface devices.

The device belongs to the MSP430F2xx family and is built around a 16-bit RISC architecture with 16-bit registers. Its five low-power modes support a mixed operating strategy in which the MCU sleeps between measurements and wakes to process or transmit data. This is especially valuable in battery-operated instruments where average current, rather than peak processing speed, determines useful service life.

Typical uses include portable environmental monitors, compact industrial sensing nodes, digital thermometers, low-power data loggers, and battery-powered laboratory instruments. The combination of analog inputs and serial interfaces lets one controller handle a sensor, apply filtering or threshold logic, and forward results through a wired communications link.

PCB design should preserve analog signal quality and support the MCU's low-power behavior. Place the ADC input network and its ground reference away from high-current switching paths, route serial signals according to their expected edge rates, and follow the manufacturer datasheet for decoupling, exposed thermal considerations, and pin-specific functions.

This page combines device specifications, verified sourcing information, practical application guidance, and same-package replacement analysis. It also identifies the memory and peripheral trade-offs that engineers should review before migrating an existing MSP430 design.

Alternatives de remplacement direct pour MSP430F2112IPW — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MSP430F2112IPW (même facteur de forme et même empreinte) — différant par Flash Memory, Mounting Type, Package, SRAM, Comparator.

Texas Instruments
Flash Memory: 4 KB (4 K x 8)
Package: 20-pin TSSOP (PW)
Comparer avec MSP430F2112IPW →
Texas Instruments
Flash Memory: 4KB
Mounting Type: Through-hole
SRAM: 512B
Comparer avec MSP430F2112IPW →

MSP430F2122IPW

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 28-pin TSSOP
16-bit RISC · 16 MHz · 16 bit · 4KB · 4K x 8 bit plus 256B · 512B · 10 bit · Integrated

Contactez-nous pour le prix

Voir la fiche technique →

MSP430F2111IPW

✅ Remplacement direct ⚠️ Spécifications non vérifiées
📦 28-pin TSSOP
Uses the same MSP430F21x2 28-pin TSSOP family and approximately the same 2 KB Flash and 256 B SRAM resource level, but comparator and ADC feature differences require verification.

📋 Alternative de référence (hors catalogue)

MSP430F2121IPW

✅ Remplacement direct ⚠️ Spécifications non vérifiées
Texas Instruments
📦 28-pin TSSOP
16-bit ultra-low-power mixed-signal microcontroller · 16-bit RISC · 16 MHz · 4 KB (4 K x 8) · 256 B · 16 bit · 62.5 ns · Integrated

Contactez-nous pour le prix

Voir la fiche technique →

MSP430F1121IPW

✅ Remplacement direct
📦 28-pin TSSOP
The MSP430F12x(2) family uses a different older MCU architecture and fewer mixed-signal resources; Texas Instruments migration guidance identifies important differences that must be addressed after replacement.

📋 Alternative de référence (hors catalogue)

MSP430G2253IPW28

✅ Remplacement direct
📦 28-pin TSSOP
Shares a 28-pin TSSOP form factor but uses the different MSP430G2x architecture; flash capacity, peripheral mapping, and software compatibility differ from the 2 KB F2112 configuration.

📋 Alternative de référence (hors catalogue)

MSP430F2112IPW Valeurs maximales et caractéristiques électriques

CPU Architecture 16-bit RISC
Register Width 16 bit
Fréquence d'horloge maximale 16 MHz
Flash Memory 2 KB
SRAM 256 B
ADC Resolution 10 bit
Comparator 1 comparator
Serial Interfaces I2C, SPI, and UART
Low-Power Modes 5 modes
Tension d'alimentation 2.5 V or 3.3 V
Boîtier 28-pin TSSOP
Package Width 4.40 mm
Type de montage Surface mount

Guide de configuration des broches du MSP430F2112IPW 4.40 mm

Configuration des broches du MSP430F2112IPW (boîtier 4.40 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 4.40 mm pour le MSP430F2112IPW

Aucune donnée de brochage détaillée disponible pour MSP430F2112IPW.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MSP430F2112IPW convient pour 6 applications: Portable Environmental Monitor, Battery-Powered Data Logger, Digital Thermometer, Industrial Sensing Node, Low-Power Remote Controller, Battery-Powered Laboratory Instrument.

🧩

Portable Environmental Monitor

The MSP430F2112IPW fits portable environmental monitors that combine periodic sensing with low-power operation. Its 10-bit ADC can sample temperature, humidity, air-quality, or light signals, while the comparator can perform fast threshold detection without continuously running the CPU. The 16 MHz processor handles calibration, filtering, and status logic, and the 256 B of SRAM supports compact working buffers. I2C is suitable for compatible digital sensors, while UART or SPI can connect a host or external logger. Because the device provides five low-power modes, the firmware can sleep during sensor settling and wake for conversion and transmission. The principal design trade-off is the limited 2 KB of Flash, so application code, communication buffers, and update logic must be sized carefully.

🔋

Battery-Powered Data Logger

The MSP430F2112IPW is appropriate for battery-powered data loggers in which energy use and component count are primary constraints. Its 16-bit CPU can sample sensors, timestamp events, and update a local record without requiring a high-power application processor. The 2 KB of Flash is suitable for compact firmware, while the 256 B of SRAM can hold short acquisition windows or protocol buffers. The UART interface provides a straightforward connection to a serial storage or communications module, and the low-power modes permit long idle periods between measurements. System-level battery life depends on the sensor and interface loads as well as the MCU, so developers should measure average current across the complete operating cycle. Firmware should also prevent logging routines from exhausting the 2 KB code space.

🌡️

Digital Thermometer

A compact digital thermometer can use the MSP430F2112IPW to combine analog sensing, threshold logic, and a serial readout. The 10-bit ADC is suitable for temperature-sensor outputs within the application's required accuracy, and the comparator can provide a simple over-temperature or set-point signal. A 16 MHz clock supports responsive display updates, calibration checks, and menu or interface handling without raising the device above the MSP430 family's low-power operating concept. I2C can connect a compatible display or temperature sensor, while UART can provide a wired output for test equipment. The 28-pin TSSOP package supports compact handheld products. Design effort should focus on sensor error, reference stability, and update latency, because those factors often determine thermometer accuracy more than CPU performance.

🏭

Industrial Sensing Node

The MSP430F2112IPW can serve as the local controller in a compact industrial sensing node that monitors an analog process signal and reports its status. Its 10-bit ADC and comparator provide analog acquisition and threshold functions, while I2C, SPI, and UART permit connection to sensors, local indicators, and a supervisory controller. The 16-bit RISC architecture and five low-power modes are useful in distributed systems where nodes operate intermittently on limited energy budgets. The 28-pin TSSOP package is practical for densely populated instrumentation, although industrial temperature qualification and EMC requirements must be checked against the exact product specification. Firmware should include input filtering, fault reporting, and communication retry logic while keeping code within the 2 KB Flash constraint.

🌐

Low-Power Remote Controller

The MSP430F2112IPW is well suited to a low-power remote controller that handles local user inputs, monitors an analog condition, and communicates with a central unit. The comparator can detect a threshold crossing, the ADC can quantify a sensor level, and the UART can provide a conventional command-and-response link. For a multi-wire or bus-based peripheral arrangement, I2C or SPI offers a more compact interface. Because the MCU supports five low-power modes, the controller can remain dormant until an input or sensor event occurs, reducing continuous energy consumption in remote installations. The 256 B of SRAM is adequate for modest protocol and control state, while the 2 KB Flash budget favors focused firmware. A production design should include watchdog-style recovery and defined behavior for communications loss.

🔬

Battery-Powered Laboratory Instrument

The MSP430F2112IPW can support a portable laboratory instrument that performs basic acquisition, control, and communication without a complex mixed-signal processor. The 10-bit ADC handles general-purpose analog measurements, the comparator provides fast limit detection, and the available serial interfaces support both low-speed sensors and service-port connectivity. Its 16 MHz CPU and 16-bit registers simplify arithmetic and state-machine development, while five low-power modes help control battery drain in bench instruments that spend much of their time idle. I2C and SPI suit higher-throughput peripherals, and UART supports simple terminal or service connections. The main constraint is memory: firmware, calibration coefficients, communication buffers, and logging code must fit within 2 KB of Flash and operate safely within 256 B of SRAM.

What are the key specifications of MSP430F2112IPW that engineers should know?
The MSP430F2112IPW combines a 16 MHz 16-bit RISC CPU, 2 KB of Flash, 256 B of SRAM, a 10-bit ADC, a comparator, and I2C, SPI, and UART interfaces in a 28-pin TSSOP package. According to the Texas Instruments MSP430F2112 product page, the device also provides five low-power modes for battery-focused measurement designs. These specifications make it suitable for compact embedded instruments that must acquire analog signals, process data locally, and communicate with a host or peripheral.
Where can I download the MSP430F2112IPW datasheet PDF?
The official MSP430F2112 information and datasheet resources are available from the Texas Instruments product page at https://www.ti.com/product/MSP430F2112. The part-specific ordering information for MSP430F2112IPW is also available on TI's part-details page. Use the manufacturer datasheet for the complete pin list, electrical characteristics, timing diagrams, recommended application circuits, and the latest package information before finalizing a PCB design.
Where can I find the MSP430F2112IPW pinout and package details?
The MSP430F2112IPW uses a 28-pin TSSOP package, and its authoritative pin assignments are shown in the Texas Instruments MSP430F2112 datasheet and product documentation. The device includes mixed-signal and serial-interface functions, so pin assignments should be checked against the exact ordering suffix rather than inferred from a generic MSP430 diagram. The manufacturer part-details page at https://www.ti.com/product/MSP430F2112/part-details/MSP430F2112IPW identifies the exact configured device.
What is the MSP430F2112IPW used for?
The MSP430F2112IPW is used for compact, low-power embedded measurement and control products that combine analog sensing with serial communications. Its 10-bit ADC can acquire sensor signals, its comparator can support threshold detection, and its I2C, SPI, and UART interfaces can connect external sensors, displays, and converters. The 16 MHz CPU and 256 B of SRAM also allow local filtering, state-machine control, and protocol handling in portable instruments.
Why is MSP430F2112IPW suitable for battery-powered equipment?
The MSP430F2112IPW is suitable for battery-powered equipment because its MSP430 architecture provides five low-power modes optimized for extended operation between measurement events. According to the Texas Instruments product description, this sleep-and-wake strategy is intended to increase battery life in portable measurement applications. The device can remain in a low-power state while the external sensor settles, then process and transmit the result before returning to a reduced-energy mode.
What is the difference between MSP430F2112IPW and MSP430F1121IPW?
The MSP430F2112IPW is the stronger functional match because it belongs to the MSP430F2xx mixed-signal family and provides a 10-bit ADC, comparator, I2C, SPI, UART, and five low-power modes. The MSP430F1121IPW appears in a cross-reference result, but a pin-compatible replacement still requires firmware and peripheral review. According to Texas Instruments migration guidance, F21x2 devices can directly replace F12x(2) designs only when important device differences are addressed.
When should I choose MSP430F2112IPW over MSP430F2122IPW?
Choose MSP430F2112IPW when the design specifically targets the MSP430F2112 device with 2 KB of Flash and 256 B of SRAM. MSP430F2122IPW is a closely related MSP430F21x2 option that should be selected only after confirming its complete peripheral map, memory organization, and software requirements against the intended design. Since both devices are closely related, the decisive factors are the exact mixed-signal features, application code requirements, and qualification status needed by the product.
Is MSP430F2112IPW suitable for a portable sensor node?
Yes, the MSP430F2112IPW is suitable for a portable sensor node that needs analog acquisition and low-power intermittent operation. Its 10-bit ADC supports basic sensor measurement, the comparator can implement threshold or wakeup logic, and I2C or SPI can connect suitable peripherals. UART provides a simple host interface when appropriate. For battery sizing, measure the complete application current rather than the MCU alone, including the sensor, pull resistors, interface circuits, and regulator losses.
What can replace MSP430F2112IPW?
The closest replacements are same-family Texas Instruments MSP430F21x2 devices in the same 28-pin TSSOP footprint, including MSP430F2122IPW and MSP430F2111IPW. They must still be checked for pin, peripheral, clock, memory, and firmware compatibility before substitution. No verified cross-manufacturer drop-in replacement was identified for this exact configuration, so changing MCU vendors would normally require board and software redesign rather than a direct replacement.
Is MSP430F2112IPW the same as MSP430G2253IPW28?
No, the MSP430F2112IPW and MSP430G2253IPW28 are not the same device even though both are associated with 28-pin TSSOP implementations. The MSP430F2112IPW has 2 KB of Flash, a 10-bit ADC, and I2C, SPI, and UART, while the G2x family has a different memory and peripheral architecture. A physical package match does not establish software or pin compatibility, so firmware, interrupt vectors, peripherals, and clock configuration must be reviewed.
What is the best cross-brand equivalent for MSP430F2112IPW?
No cross-brand pin-compatible equivalent has been verified for the MSP430F2112IPW. A similarly packaged 16-bit microcontroller may differ in ADC implementation, serial peripheral mapping, low-power behavior, memory size, and programming model, so it should not be treated as a drop-in replacement. For a mixed-signal design requiring a PCB change and software port, request a quote for the original Texas Instruments device and ask the MCU manufacturer to confirm footprint and peripheral compatibility in writing.
How much memory does MSP430F2112IPW have?
The MSP430F2112IPW has 2 KB of Flash memory and 256 B of SRAM. The Texas Instruments product page identifies the device as a 16 MHz MSP430 with 2 KB of Flash and 256 B of SRAM. This capacity is suitable for compact control code and limited local data buffering, but firmware size, stack depth, communication buffers, and any logging requirements should be estimated before selecting the device for a larger application.
Which serial interfaces are available on MSP430F2112IPW?
The MSP430F2112IPW includes I2C, SPI, and UART interfaces. According to the Texas Instruments product overview, these peripherals support connection to sensors, external converters, displays, and service-port equipment. Choose the interface according to topology and signal-rate requirements rather than assuming all three have identical electrical characteristics or pin assignments. Confirm the selected pins, alternate functions, and peripheral multiplexing in the manufacturer datasheet.
Can I buy MSP430F2112IPW online and check its lead time?
The MSP430F2112IPW is offered through authorized distribution channels, but current inventory and lead time can change quickly. Use the Request a Quote form on this page to request the exact MPN, quantity, target packaging, and required delivery date. Quote requests are also preferable for production planning because they confirm the configured suffix, current manufacturing status, and shipment schedule for the complete order.
What is the MSP430F2112IPW lifecycle status?
The MSP430F2112IPW is listed as an active Texas Instruments product on the manufacturer product page. The exact MSP430F2112IPW ordering information is also maintained by Texas Instruments under the MSP430F2112 family. For long-lived programs, request periodic lifecycle and change-notification reviews through the Request a Quote form so purchasing, quality, and engineering teams can track the exact orderable configuration.
What compliance documents apply to MSP430F2112IPW?
The MSP430F2112IPW should be ordered against its exact manufacturer ordering information and the declarations associated with the current Texas Instruments product record. RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification status were not established by the manufacturer information used for this page. Request current compliance documentation and the exact manufacturer declarations through the Request a Quote form before making a finished-product compliance claim.

Données de référence d'ingénierie pour MSP430F2112IPW — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MSP430F2112IPW when a design needs a compact MSP430 mixed-signal controller with a 16 MHz CPU, 2 KB of Flash, 256 B of SRAM, a 10-bit ADC, comparator, and I2C, SPI, and UART in a 28-pin TSSOP package. Its five low-power modes make it particularly suitable for portable measurement systems that spend much of their time asleep. MSP430F2122IPW is the logical same-family option when its verified memory and peripheral configuration satisfies the design, but the MSP430F2111IPW and MSP430F2121IPW also require exact peripheral checks. Consider MSP430F1121IPW only after reviewing Texas Instruments migration guidance because the older architecture introduces functional differences. The MSP430G2253IPW28 shares a 28-pin TSSOP form factor but requires a more substantial MSP430G2x firmware and peripheral migration. No verified cross-brand drop-in replacement was identified; choosing another manufacturer would normally require a PCB and software redesign rather than a component substitution.

Comparaison avec les alternatives

Paramètre Ce produit MSP430F2122IPW MSP430F2111IPW MSP430F2121IPW MSP430F1121IPW MSP430G2253IPW28
Package 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP 28-pin TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
CPU Architecture 16-bit RISC MSP430F2xx 16-bit RISC MSP430F21x2 16-bit RISC MSP430F21x1 16-bit RISC MSP430F21x1 16-bit MSP430F12x architecture 16-bit MSP430G2x architecture
Software Porting Requirement Baseline MSP430F2112 firmware MSP430F21x2 port with peripheral and memory checks MSP430F21x1 port with peripheral checks MSP430F21x1 port with peripheral checks Architecture migration and device-difference review MSP430G2x firmware and peripheral migration

Principaux différenciateurs

  • Combines a 10-bit ADC, comparator, and three serial interfaces in one mixed-signal MCU (vs MSP430F1121IPW)
  • Directly matches the low-power measurement role of the MSP430F21x2 family (vs MSP430G2253IPW28)
  • Provides a direct family path without changing the 28-pin TSSOP footprint (vs MSP430F2111IPW)
  • Supports three embedded serial protocols from one MCU (vs MSP430F2121IPW)

Notes de conception

Design the sleep-and-wake sequence around the complete measurement cycle rather than the MCU active current alone. Disable unused peripherals, configure unused pins appropriately, and place the device in the lowest mode that preserves the required wake behavior. Estimate average current from active current, standby current, wake duration, and sampling interval. Include the sensor, pull resistors, interface transceivers, regulator losses, and indicator currents because these loads can dominate the final battery-life result.

Route the ADC input and reference paths away from switching-regulator nodes, relay contacts, high-current LEDs, and other noisy sources. Keep the analog ground path compact and follow the manufacturer recommended decoupling arrangement for the supply pins. Place input and output bypass capacitors close to their corresponding pins, with the smallest capacitor nearest the package. Preserve a quiet analog island around the MCU when the PCB area permits, and use a solid ground-plane strategy without splitting return paths beneath digital interfaces.

Do not assume that equal TSSOP pin counts guarantee a drop-in replacement. Compare the actual signal assigned to every pin, alternate-function multiplexing, power pins, reset behavior, clock configuration, ADC channels, interrupt vectors, and timer resources. Texas Instruments migration guidance specifically warns that device differences can require attention even when pin compatibility is claimed. For any alternative, rebuild or validate the firmware, run communications and timing tests, and check the operating limits before releasing the PCB.

Give serial interfaces routing priority based on edge rate and topology. Keep I2C and UART signal paths continuous and away from antenna or switching-node copper, and use the ground plane as the primary return path. SPI clock lines should be short where possible, with the return path beneath the signal rather than split across a plane boundary. If external sensors communicate through long cables, add protection close to the connector so transient energy does not propagate into the controller.

The 2 KB Flash and 256 B SRAM limits require a deliberate firmware budget. Measure code size early, keep large lookup tables out of SRAM, and avoid allocating full protocol buffers when a streaming or byte-oriented approach will work. Include stack headroom for interrupt routines and avoid calling deeply nested functions from time-critical handlers. A modest memory-margin target helps prevent field failures caused by compiler changes, diagnostics, or later feature growth.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

Request current manufacturer declarations for the exact MSP430F2112IPW ordering configuration before making a compliance claim. No verified cross-brand drop-in replacement was identified.

Données vérifiées le : 2026-11-20 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MSP430F2112IPW datasheet MSP430F2112IPW pinout MSP430F2112IPW datasheet pdf Texas Instruments MSP430F2112IPW MSP430F2112 16MHz 2KB flash MSP430F2112IPW 28-TSSOP pinout MSP430F2112IPW drop-in replacement MSP430F2112IPW vs MSP430F1121IPW MSP430F2112IPW vs MSP430G2253IPW28 MSP430F2112IPW low power application MSP430F2112IPW price MSP430F2112IPW stock

Composants & termes associés

Texas Instruments MSP430F2112IPW MSP430F2112 MSP430F2122IPW MSP430F2111IPW MSP430F2121IPW MSP430F1121IPW MSP430G2253IPW28 MSP430 MSP430F2xx mixed-signal microcontroller 16-bit RISC CPU 16-bit registers 10-bit ADC comparator I2C SPI UART 2 KB Flash memory 256 B SRAM 16 MHz clock five low-power modes 28-pin TSSOP TSSOP package family surface-mount device portable measurement battery-powered sensor node
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ