PIC32MM0016GPL036-I/M2 - 32-Bit MCU, 16KB Flash, 36-SQFN | Microchip
Référence : PIC32MM0016GPL036-I/M2 ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.55 | $25,50 |
| 100 | $2.2 | $220,00 |
| 500 | $1.92 | $960,00 |
| 1 000 | $1.65 | $1 650,00 |
PIC32MM0016GPL036-I/M2 Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable peripherals onto one silicon die. The PIC32MM GPL line sits inside Microchip's broader PIC32 family and within the wider hierarchy of 32-bit microcontrollers, offering an ARM-free, MIPS-based alternative for low-power applications. The microAptiv UC core provides the standard MIPS32 instruction set plus microMIPS code compression for higher code density.
Key features of the PIC32MM0016GPL036-I/M2 include 16 KB Flash, 4 KB SRAM, 79 CoreMark performance at 25 MHz, integrated peripherals such as ADC, comparators, PWM, I2C, SPI, and UART, and XLP sleep modes that reach down to 500 nA for long battery life. The 36-pin SQFN package gives access to roughly two dozen GPIO pins while keeping PCB footprint under 6x6 mm.
Technically, the part uses the microAptiv UC pipeline with hardware multiply/divide and a tightly coupled peripheral bus, running from a 2.0 V to 3.6 V supply. The Flash endurance is rated for 20K minimum erase/write cycles and SRAM is retained down to 1.8 V typical, supporting RTC backup scenarios. Programming is supported via Microchip's standard ICSP/ICD interface and the MPLAB Harmony ecosystem.
Typical applications include IoT sensor nodes, wearable fitness/health monitors, low-cost remote controls, small home appliances, and consumer devices where the design needs 32-bit performance without Cortex-M pricing. Industrial uses include HMI panels, simple motor control loops, and USB-to-UART bridges when paired with an external transceiver.
When designing with this MCU, mind the 3.6 V absolute maximum VDD and route the exposed pad of the SQFN to a solid ground pour for thermal dissipation. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the supply pins.
This page synthesizes distributor stock, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC32MM0016GPL036-I/M2 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MM0016GPL036-I/M2 (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Core Architecture, Data Memory (SRAM), Program Memory (Flash).
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MM0016GPL036-E/M2
✅ Remplacement direct✓ En stock
$0.61 / unité
Voir la fiche technique →PIC32MM0032GPL036-I/M2
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC32MM0064GPL036-I/M2
✅ Remplacement direct✓ En stock
$1.65 / unité
Voir la fiche technique →PIC32MM0016GPL036T-I/M2
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$0.65 / unité
Voir la fiche technique →PIC32MM0016GPL036-I/M2VAO
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC32MM0016GPL036-I/M2 Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 microAptiv UC |
| Program Memory (Flash) | 16 KB (16K x 8) |
| Data Memory (SRAM) | 4 KB |
| Maximum CPU Speed | 25 MHz |
| CoreMark Score | 79 CoreMark at 25 MHz |
| Supply Voltage (VDD) | 2.0 V to 3.6 V |
| Température de fonctionnement | -40C to +85C (Industrial, -I suffix) |
| Boîtier | 36-pin SQFN (6x6 mm) |
| Sleep Current (XLP) | 500 nA typical (per family claim) |
| Instruction Set | MIPS32 / microMIPS |
| Programming Interface | ICSP / ICD (4-wire JTAG-like) |
| Type de montage | Surface Mount |
| Statut RoHS | Compliant |
| Flash Endurance | 20K erase/write cycles minimum |
| Lead-Free | Yes |
Configuration des broches de PIC32MM0016GPL036-I/M2
| Broche 1 | RA0 — GPIO/Analog input |
| Broche 2 | RA1 — GPIO/Analog input |
| Broche 3 | RA2 — GPIO/Analog input |
| Broche 4 | RA3 — GPIO/Analog input |
| Broche 5 | VDD — Supply voltage (2.0 V to 3.6 V) |
| Broche 6 | VSS — Ground reference |
| Broche 7 | RB0 — GPIO/Programming pin |
| Broche 8 | RB1 — GPIO/Programming pin |
| Broche 9 | RB2 — GPIO |
| Broche 10 | RB3 — GPIO |
| Broche 11 | RB4 — GPIO/SDA |
| Broche 12 | RB5 — GPIO/SCL |
| Broche 13 | RB6 — GPIO/PGC (ICD clock) |
| Broche 14 | RB7 — GPIO/PGD (ICD data) |
| Broche 15 | RB8 — GPIO |
| Broche 16 | RB9 — GPIO |
| Broche 17 | RB10 — GPIO |
| Broche 18 | RB11 — GPIO |
| Broche 19 | RB12 — GPIO |
| Broche 20 | RB13 — GPIO |
| Broche 21 | RB14 — GPIO |
| Broche 22 | RB15 — GPIO |
| Broche 23 | RC0 — GPIO |
| Broche 24 | RC1 — GPIO |
| Broche 25 | RC2 — GPIO |
| Broche 26 | RC3 — GPIO |
| Broche 27 | RC4 — GPIO |
| Broche 28 | RC5 — GPIO |
| Broche 29 | RC6 — GPIO |
| Broche 30 | RC7 — GPIO |
| Broche 31 | RC8 — GPIO |
| Broche 32 | RC9 — GPIO |
| Broche 33 | MCLR — Master clear reset (active low) |
| Broche 34 | OSC1 — Crystal oscillator input |
| Broche 35 | OSC2 — Crystal oscillator output |
| Broche 36 | AVDD — Analog supply voltage |
| Broche EP | EP — Exposed thermal pad - connect to ground |
Applications typiques
PIC32MM0016GPL036-I/M2 convient pour 6 applications: IoT Sensor Nodes, Wearable Health and Fitness Devices, Low-Cost Remote Controls, Small Home Appliances, Consumer HMI Panels, USB-to-UART Bridge Modules.
IoT Sensor Nodes
The PIC32MM0016GPL036-I/M2's 500 nA XLP sleep current and 25 MHz microAptiv UC core make it ideal for battery-powered IoT sensor nodes that spend most of their life in deep sleep. With 16 KB Flash for small RTOS or bare-metal firmware and 4 KB SRAM for sensor buffering, it fits temperature, humidity, occupancy, and air-quality nodes. The 36-SQFN (6x6 mm) footprint is small enough for coin-cell sensor tags, and the integrated ADC plus I2C/SPI peripherals connect directly to digital sensors. Pair with a sub-GHz or BLE radio module for typical wireless IoT deployments.
Recommandé
Wearable Health and Fitness Devices
The PIC32MM0016GPL036-I/M2 suits wearable fitness bands and health patches where every microwatt counts. The 2.0 V to 3.6 V supply works directly from a single-cell Li-ion or Li-poly battery, and the 500 nA sleep current extends battery life to weeks or months between charges. The microAptiv UC core at 25 MHz runs BLE stack prep, heart-rate algorithms, and step counting in real time. The 36-SQFN footprint fits wristbands, and the ADC plus comparators interface with optical heart-rate and motion sensors.
Recommandé
Low-Cost Remote Controls
The PIC32MM0016GPL036-I/M2 delivers ample MIPS for IR/RF remote control encoding while keeping BOM cost under $3 at volume. The 16 KB Flash stores dozens of device code tables, the 4 KB SRAM buffers key-scan debouncing, and the microAptiv UC core handles RC5, NEC, SIRC, or proprietary protocols without taxing CPU. The PWM peripherals drive IR LEDs directly, and the 2.0 V to 3.6 V supply supports two AAA cells. The 36-SQFN package fits slim handheld enclosures.
Recommandé
Small Home Appliances
The PIC32MM0016GPL036-I/M2 fits small home appliances such as coffee makers, blenders, humidifiers, and air purifiers that need 32-bit control without Cortex-M pricing. The microAptiv UC core at 25 MHz runs PID loops for motor speed, temperature regulation, and humidity control. Integrated PWM outputs drive TRIACs or FETs for heating elements and pumps. The ADC reads thermistors, water-level sensors, and motor current. Industrial temperature grade ensures reliable operation in warm appliance interiors.
Recommandé
Consumer HMI Panels
The PIC32MM0016GPL036-I/M2 powers low-cost human-machine interface panels such as thermostats, security keypads, and simple appliance displays. The microAptiv UC core at 25 MHz drives character LCDs or small graphical OLEDs, scans key matrices, and runs menu state machines. The 16 KB Flash supports multi-language UI strings, and 4 KB SRAM handles display buffers. The 36-SQFN footprint is small enough for wall-mounted thermostats, and the integrated I2C/SPI/UART interfaces connect to displays, capacitive touch controllers, and Wi-Fi modules.
Recommandé
USB-to-UART Bridge Modules
The PIC32MM0016GPL036-I/M2 serves as the host MCU in low-cost USB-to-UART bridge modules that replace discontinued CP2102-class parts. The microAptiv UC core at 25 MHz handles USB CDC enumeration and UART data forwarding with low latency, while 16 KB Flash stores USB stack and class drivers. The 4 KB SRAM buffers bulk transfers. The 2.0 V to 3.6 V supply is compatible with USB-powered designs through an on-board 3.3 V LDO. The 36-SQFN package keeps the module footprint under 1 square centimeter.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MM0016GPL036-I/M2 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MM0016GPL036-E/M2 | PIC32MM0032GPL036-I/M2 | PIC32MM0064GPL036-I/M2 | PIC32MM0016GPL036T-I/M2 |
|---|---|---|---|---|---|
| Package | 36-SQFN (6x6 mm) | 36-SQFN (6x6 mm) - same | 36-SQFN (6x6 mm) - same | 36-SQFN (6x6 mm) - same | 36-SQFN (6x6 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same brand | Microchip Technology - same brand | Microchip Technology - same brand | Microchip Technology - same brand |
| Flash Memory | 16 KB | 16 KB - identical | 32 KB | 64 KB | 16 KB - identical |
| SRAM | 4 KB | 4 KB - identical | 4 KB - identical | 8 KB | 4 KB - identical |
| Maximum CPU Speed | 25 MHz | 25 MHz - identical | 25 MHz - identical | 25 MHz - identical | 25 MHz - identical |
| Core Architecture | MIPS32 microAptiv UC | MIPS32 microAptiv UC - identical | MIPS32 microAptiv UC - identical | MIPS32 microAptiv UC - identical | MIPS32 microAptiv UC - identical |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Supply Voltage | 2.0 V to 3.6 V | 2.0 V to 3.6 V - identical | 2.0 V to 3.6 V - identical | 2.0 V to 3.6 V - identical | 2.0 V to 3.6 V - identical |
Principaux différenciateurs
- Lower-cost variant of PIC32MM0064GPL036 family with same footprint (vs PIC32MM0064GPL036-I/M2)
- Extended temperature variant available in same footprint (vs PIC32MM0016GPL036-E/M2)
- Higher Flash options in same 36-SQFN pinout (vs PIC32MM0032GPL036-I/M2)
Notes de conception
The PIC32MM0016GPL036-I/M2 operates from 2.0 V to 3.6 V. Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of the supply pin, plus a bulk 1 uF to 10 uF tantalum or ceramic capacitor on the same rail. For battery applications using a single-cell Li-ion (3.0 V to 4.2 V), add an LDO such as MCP1700 to drop to 3.3 V. The XLP sleep modes draw as low as 500 nA per Microchip family claims, but verify on bench because actual sleep current depends on enabled peripherals and wake-up sources.
The 36-SQFN package has an exposed thermal pad (pin EP) that must be soldered to a ground pour of at least 25 mm² to meet the datasheet thermal ratings. Without the EP soldered, junction-to-ambient thermal resistance (theta_JA) rises sharply and the device may overheat at full 25 MHz CPU load with peripherals enabled. Use at least 4 thermal vias in the EP pad connecting top copper to inner/bottom ground planes. For continuous heavy computation, derate ambient temperature by 5C to 10C below the 85C industrial maximum.
Place the 100 nF decoupling capacitor directly between VDD (pin 5) and VSS (pin 6) using short traces to minimize parasitic inductance. Keep the crystal or external clock traces to OSC1/OSC2 short and surrounded by ground pour to avoid coupling digital switching noise into the oscillator. Route analog signals (AVDD, analog GPIO) away from high-speed digital lines such as PWM outputs and clock traces. Avoid running noisy signals under the device to prevent injected crosstalk into sensitive ADC channels.
Do not exceed 3.6 V on VDD - even brief over-voltage transients can damage the on-chip voltage regulator. Always include a 10 kohm pull-up resistor on MCLR to ensure clean reset behavior; floating MCLR can cause unpredictable resets. When using the ADC, allow sufficient acquisition time by selecting an appropriate ADC clock divider in your firmware, or readings will be inaccurate. Finally, ensure the ICSP/ICD programming pins (PGC/PGD) are not loaded with heavy capacitance that prevents in-circuit debugging.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Industrial temperature grade -I (not AEC-Q100). For automotive AEC-Q100 qualified parts in this family, look at PIC32MM automotive variants.
