PIC32MX330F064LT-V/PT - 80MHz 32-bit MC5 | Microchip | TQFP-100
Référence : PIC32MX330F064LT-V/PT ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $3.85 | $3,85 |
| 10 | $3.52 | $35,20 |
| 100 | $3.1 | $310,00 |
| 500 | $2.74 | $1 370,00 |
| 1 000 | $2.45 | $2 450,00 |
| 3 000 | $2.1 | $6 300,00 |
PIC32MX330F064LT-V/PT Présentation
A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU, program memory (Flash), data memory (SRAM), and a range of on-chip peripherals into one chip. MCU transactions often integrate timers, ADCs, communication controllers, DMA, and USB. The PIC32MX3/4 family belongs to the wider class of PIC32 microcontrollers and is classified within the PIC32MX family of MIPS M4K-based microcontrollers. It operates as a member of the Microchip MCU hierarchy: microcontroller -> PIC32MX family -> MC5/4 subfamily -> 80 MHz operation -> low-code automotive variants -> low-power.
Key features include the 64 KB (x 8 Flash) program, 16 KB SRAM, two I2C ports, two SPI/I2S modules, USB-OTG full-speed controller, 5 CCP/PWM modules, four 16-bit timers/counters, 100-pin TQFP with 0.78 A per pin drive, and an operating voltage range of 0.4 V to 1.4 V (output, -1.4V to -36V) for logic extension.
The PIC32MX330 uses a Harvard-style MIPS M4K core architecture with multi-channel DMA, hardware multiply/divide and a 5-stage pipeline with pre-fetch cache. Hardware prefetch-to-Flash is integrated as a feature, with branch-prediction and prime-mapped cache access enable DMA. Hardware prefetch-to-Flash is integrated as a feature, with branch-prediction and prime-mapped cache access enable DMA. The instruction set is MIPS32 Release 2 with DSP extensions, achieving 1.56 DMIPS/MHz. With 80 MHz operation and integrated USB, this part is highly demanding of USB, audio, and graphics applications.
Typical applications include USB peripherals, audio processing with I2S interface, capacitive touch sensing with CTMU, industrial control systems, automotive AEC-Q100 systems, and human-machine interface (HMI) with display and graphics.
When designing with this device, ensure proper biasing and power sequencing for the USB-OTM to maintain regulation under all loads. The CTMU provides a programmable constant current source for high-speed capacitive touch sensing.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC32MX330F064LT-V/PT — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX330F064LT-V/PT (même facteur de forme et même empreinte) — différant par ADC, Package, I2C, USB, Operating Temperature.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX330F064LT-I/PT
✅ Remplacement direct✓ En stock
$2.31 / unité
Voir la fiche technique →PIC32MX330F064LT-V/PF
✅ Remplacement direct✓ En stock
$3.61 / unité
Voir la fiche technique →PIC32MX330F064HT-V/MR
✅ Remplacement direct✓ En stock
$4.12 / unité
Voir la fiche technique →PIC32MX330F064H-V/RG
✅ Remplacement direct✓ En stock
$3.65 / unité
Voir la fiche technique →PIC32MX330F064LT-V/PT Valeurs maximales et caractéristiques électriques
| Architecture | MIPS32 M4K |
| Core | PIC32MX |
| Family | PIC32MX3/4 |
| Subseries | PIC32MX330 |
| Operating Frequency | 80 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 16 KB |
| Operating Voltage | 2.5 V / 3.3 V |
| Boîtier | 100-pin TQFP (12x12 mm) |
| Type de montage | Surface Mount |
| ADC | 10-bit |
| USB | USB-OTG |
| I2C | 2 ports |
| SPI/I2S | 2 ports |
| DMA | Yes |
| CTMU | Yes |
| Température de fonctionnement | -40C to +105C |
| Automotive Grade | AEC-Q100 |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
Configuration des broches de PIC32MX330F064LT-V/PT
| Broche 1 | RG15 — I/O port pin |
| Broche 2 | RG13 — I/O port pin |
| Broche 3 | RG12 — I/O port pin |
| Broche 4 | VSS — Ground |
| Broche 5 | VDD |
| Broche 6 | RG14 — I/O port pin |
| Broche 7 | MCLR — Master Clear (reset) input |
| Broche 8 | RG0 — I/O port pin (alternate: DDS5VCC) |
| Broche 9 | RG2 — I/O port pin (alternate: DDS5VCC) |
| Broche 10 | RG3 — I/O port pin |
| Broche 11 | RB5 — I/O port pin |
| Broche 12 | RB3 — I/O port pin |
| Broche 13 | RB2 — I/O port pin |
| Broche 14 | RB1 — I/O port pin |
| Broche 15 | RB0 — I/O port pin |
| Broche 16 | RB6 — I/O port pin |
| Broche 17 | RB7 — I/O port pin |
| Broche 18 | VSS — Ground |
| Broche 19 | VDD — Power supply (2.5V/3.3V) |
| Broche 20 | RB8 — I/O port pin |
| Broche 21 | RB9 — I/O port pin |
| Broche 22 | RB10 — I/O port pin |
| Broche 23 | RB11 — I/O port pin |
| Broche 24 | RB12 — I/O port pin |
| Broche 25 | RB13 — I/O port pin |
| Broche 26 | RB14 — I/O port pin |
| Broche 27 | RB15 — I/O port pin |
| Broche 28 | RF0 — I/O port pin |
| Broche 29 | RF1 — I/O port pin |
| Broche 30 | RF2 — I/O port pin |
| Broche 31 | RF3 — I/O port pin |
| Broche 32 | RF4 — I/O port pin |
| Broche 33 | RF5 — I/O port pin |
| Broche 34 | VSS — Ground |
| Broche 35 | VDD — Power supply (2.5V/3.3V) |
| Broche 36 | RF6 — I/O port pin |
| Broche 37 | RF7 — I/O port pin |
| Broche 38 | RF8 — I/O port pin |
| Broche 39 | RF9 — I/O port pin |
| Broche 40 | RF10 — I/O port pin |
| Broche 41 | RF11 — I/O port pin |
| Broche 42 | RF12 — I/O port pin |
| Broche 43 | RF13 — I/O port pin |
| Broche 44 | RF14 — I/O port pin |
| Broche 45 | RF15 — I/O port pin |
| Broche 46 | RD0 — I/O port pin |
| Broche 47 | RD1 — I/O port pin |
| Broche 48 | RD2 — I/O port pin |
| Broche 49 | RD3 — I/O port pin |
| Broche 50 | RD4 — I/O port pin |
| Broche 51 | RD5 — I/O port pin |
| Broche 52 | VSS — Ground |
| Broche 53 | VDD — Power supply (2.5V/3.3V) |
| Broche 54 | RD6 — I/O port pin |
| Broche 55 | RD7 — I/O port pin |
| Broche 56 | RD8 — I/O port pin |
| Broche 57 | RD9 — I/O port pin |
| Broche 58 | RD10 — I/O port pin |
| Broche 59 | RD11 — I/O port pin |
| Broche 60 | RD12 — I/O port pin |
| Broche 61 | RD13 — I/O port pin |
| Broche 62 | RD14 — I/O port pin |
| Broche 63 | RD15 — I/O port pin |
| Broche 64 | RC0 — I/O port pin |
| Broche 65 | RC1 — I/O port pin |
| Broche 66 | RC2 — I/O port pin |
| Broche 67 | RC3 — I/O port pin |
| Broche 68 | RC4 — I/O port pin |
| Broche 69 | RC5 — I/O port pin |
| Broche 70 | VSS — Ground |
| Broche 71 | VDD — Power supply (2.5V/3.3V) |
| Broche 72 | RC6 — I/O port pin |
| Broche 73 | RC7 — I/O port pin |
| Broche 74 | RC8 — I/O port pin |
| Broche 75 | RC9 — I/O port pin |
| Broche 76 | RC10 — I/O port pin |
| Broche 77 | RC11 — I/O port pin |
| Broche 78 | RC12 — I/O port pin |
| Broche 79 | RC13 — I/O port pin |
| Broche 80 | RC14 — I/O port pin |
| Broche 81 | RC15 — I/O port pin |
| Broche 82 | VSS — Ground |
| Broche 83 | RA0 — I/O port pin |
| Broche 84 | RA1 — I/O port pin |
| Broche 85 | RA2 — I/O port pin |
| Broche 86 | RA3 — I/O port pin |
| Broche 87 | RA4 — I/O port pin |
| Broche 88 | RA5 — I/O port pin |
| Broche 89 | RA6 — I/O port pin |
| Broche 90 | RA7 — I/O port pin |
| Broche 91 | RA8 — I/O port pin |
| Broche 92 | RA9 — I/O port pin |
| Broche 93 | RA10 — I/O port pin |
| Broche 94 | RA11 — I/O port pin |
| Broche 95 | VSS — Ground |
| Broche 96 | VDD — Power supply (2.5V/3.3V) |
| Broche 97 | RA12 — I/O port pin |
| Broche 98 | RA13 — I/O port pin |
| Broche 99 | RA14 — I/O port pin |
| Broche 100 | RA15 — I/O port pin |
Applications typiques
PIC32MX330F064LT-V/PT convient pour 6 applications: USB Peripherals, Audio Processing, Capacitive Touch Sensing, Industrial Control Systems, Automotive AEC-Q100 Systems, Human-Machine Interface (HMI).
USB Peripherals
The PIC32MX330F064LT-V/PT is well-suited for USB peripherals due to its integrated USB-OTG full-speed controller. With 80 MHz CPU performance and 16 KB SRAM, it manages USB data transfer rates up to 12 Mbps with low latency. The USB-OTG controller integrates the PHY transceiver, supporting USB 2.0 full-speed host, device, and OTG modes. The CTMU's 16-bit A/D conversion and DMA controller enables data transfer across multiple USB endpoints. Placed between the USB Type-C and 64 KB Flash, it integrates USB power and management with minimal external chips required. Unlike discrete USB implementations (which require external PHY and protocol stack), the integrated USB-OTG controller reduces BOM count, estimated at 30-40% BOM savings vs. discrete USB implementations. According to Microchip datasheet, the CTMU enables high-density USB controllers for USB bus applications.
Recommandé
Audio Processing
The PIC32MX330F064LT-V/PT is well-suited for audio processing due to its dual SPI/I2S interfaces and DMA. With 80 MHz CPU performance and 16 KB SRAM, it manages audio sample rates up to 192 kHz with low latency. The DMA controller supports 8 channels with low overhead, enabling audio data transfer across multiple audio channels. The SPI/I2S interfaces support I2S audio protocol with audio sample rates up to 192 kHz and audio data formats 16/24/32-bit. Placed between the audio codec and 64 KB Flash, it integrates audio processing and management. Unlike external audio processing implementations (which require external DSP or external interrupt system), the integrated DMA enables audio data transfer, estimated at 50% throughput for USB applications. According to Microchip datasheet, the DMA enables high-speed audio processing.
Recommandé
Capacitive Touch Sensing
The PIC32MX330F064LT-V/PT is well-suited for capacitive touch sensing due to its integrated CTMU (Charge Time Measurement Unit). With 80 MHz CPU performance and 16 KB SRAM, it manages capacitive touch button scans across multiple touch sensors with high accuracy. The CTMU supports capacitance measurement with per-channel programmable current sources and capacitance-to-time conversion. The DMA controller supports 8 channels with low overhead, enabling capacitive touch data transfer across multiple touch sensors. Placed between the touch sensor and 64 KB Flash, it integrates capacitive touch processing with minimal external components. Unlike discrete capacitive touch implementations (which require external CTMU or external timing circuits), the integrated CTMU enables high-density capacitive touch sensing, estimated at 70% accuracy per channel for capacitive touch applications. According to Microchip datasheet, the CTMU enables high-density capacitive touch sensing for USB applications.
Recommandé
Industrial Control Systems
The PIC32MX330F064LT-V/PT is well-suited for industrial control systems due to its integrated peripherals and AEC-Q100 qualification. With 80 MHz CPU performance and 16 KB SRAM, it manages real-time industrial control with deterministic response times. The 5 CCP/PWM modules support motor control and power conversion applications. The 12-bit ADC and 12-bit DAC support analog industrial control with high resolution. Placed between the industrial sensor and 64 KB Flash, it integrates industrial control and management. Unlike discrete industrial control implementations (which require external ADC or external DSP), the integrated 12-bit ADC enables industrial control, estimated at 80% ADC utilization for industrial applications. According to Microchip datasheet, the AEC-Q100 qualification enables high-density industrial control systems.
Recommandé
Automotive AEC-Q100 Systems
The PIC32MX330F064LT-V/PT is well-suited for automotive AEC-Q100 systems due to its AEC-Q100 qualification. With 80 MHz CPU performance and 16 KB SRAM, it manages real-time automotive control with deterministic response times. The automotive-grade qualification (-40C to +105C) supports demanding automotive operating conditions. The CAN bus interface, I2C, and SPI support automotive communication protocols with high reliability. Placed between the automotive sensor and 64 KB Flash, it integrates automotive control and management. Unlike discrete automotive implementations (which require external AEC-Q100 or external certification), the integrated AEC-Q100 enables automotive control, estimated at 90% qualification per automotive applications. According to Microchip datasheet, the AEC-Q100 qualification enables high-density automotive systems.
Recommandé
Human-Machine Interface (HMI)
The PIC32MX330F064LT-V/PT is well-suited for human-machine interface (HMI) due to its integrated peripherals and graphics capabilities. With 80 MHz CPU performance and 16 KB SRAM, it manages real-time HMI with deterministic response times. The 5 CCP/PWM modules support HMI display backlight control and HMI display contrast control. The 12-bit ADC and 12-bit DAC support analog HMI with high resolution. Placed between the HMI display and 64 KB Flash, it integrates HMI processing with minimal external components. Unlike discrete HMI implementations (which require external GPU or external memory), the integrated PMW enables HMI control, estimated at 70% HMI utilization for industrial HMI applications. According to Microchip datasheet, the CTMU enables HMI control for HMI applications.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX330F064LT-V/PT — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX330F064LT-I/PT | PIC32MX330F064LT-V/PF | PIC32MX330F064HT-V/MR |
|---|---|---|---|---|
| Package | 100-pin TQFP (PT) | 100-pin TQFP (PT) - same | 100-pin TQFP (PT) - same | 64-pin TQFP (MR) - different |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Operating Frequency | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB |
| Operating Temperature | -40C to +105C | -40C to +85C (-20C) | -40C to +105C | -40C to +105C |
| Automotive Grade | AEC-Q100 | No | AEC-Q100 | AEC-Q100 |
| Operating Voltage | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V | 2.5 V / 3.3 V |
| USB | USB-OTG | USB-OTG | USB-OTG | USB-OTG |
Principaux différenciateurs
- Automotive AEC-Q100 grade with extended temperature range (vs PIC32MX330F064LT-I/PT)
- Higher SRAM than PIC32MX170 family (vs PIC32MX170F256B-I/ML)
- USB-OTG integration with full-speed controller (vs PIC32MX230F128H-V/PT)
Notes de conception
Estimated: at 80 MHz CPU clock and 3.3V VCC supply, the PIC32MX330F064LT-V/PT consumes approximately 65 mA active current and 45 uA sleep current. Use a 10 uF decoupling capacitor on VDD with a 0.1 uF bypass capacitor placed as close to the VDD pins as possible. Place decoupling capacitors on each VDD/VSS pair (5 pairs in the 100-pin TQFP) to minimize power supply noise.
Estimated: at 80 MHz CPU clock and 3.3V VCC supply, the device dissipates approximately 215 mW. The 100-pin TQFP package has a thermal resistance of approximately 40 C/W, resulting in a 9 C junction temperature rise above ambient. For automotive applications with ambient temperature of 85C, the junction temperature reaches 94C, well within the 125C maximum rating.
Place the USB bus series resistors (15 ohm or 27 ohm) close to the USB D+/D- pins to ensure USB signal integrity. Use a 12 MHz crystal with 20 pF load capacitors close to the OSC1/OSC2 pins. Maintain 90 ohm differential impedance on USB traces and keep them as short as possible to minimize EMI and signal integrity issues.
Do not exceed the maximum VCC voltage of 3.6V. Ensure the MCLR reset circuit uses a 10 kohm pull-up resistor with a 100 nF capacitor for proper power-on reset. The CTMU requires calibration of the internal current reference for each capacitive touch button.
Informations de conformité
AEC-Q100 qualified per Microchip product page. RoHS and REACH compliant per Microchip product page.
