PIC32MX350F128LT-V/TL - 32-bit 80MHz MCU 128KB Flash | Microchip
Référence : PIC32MX350F128LT-V/TL ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $5.95 | $5,95 |
| 10 | $5.34 | $53,40 |
| 100 | $4.76 | $476,00 |
| 500 | $4.21 | $2 105,00 |
| 1 000 | $3.74 | $3 740,00 |
PIC32MX350F128LT-V/TL Présentation
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one die. The PIC32MX3/4 family sits within the broader taxonomy: microcontroller -> SoC -> semiconductor. PIC32 MX-series devices implement the MIPS32 M4K core, a RISC architecture that runs most instructions in a single cycle, enabling deterministic real-time behaviour. The 32-bit data path and Harvard memory architecture give PIC32 MCUs more headroom than 8-bit or 16-bit predecessors while keeping the peripheral ecosystem familiar to PIC users.
Key features of the PIC32MX350F128LT-V/TL include 128 KB Flash (128K x 8), 32 KB SRAM, an operating voltage range of 2.3 V to 3.6 V, industrial-grade -40°C to +105°C temperature range, and a Peripheral Pin Select (PPS) engine that allows most digital peripherals to be remapped to almost any I/O. The device also includes a Parallel Master Port (PMP), USB 2.0 full-speed OTG controller, 10/100 Ethernet MAC, and capacitive touch hardware support - features unusual for an MCU at this flash density.
Typical applications include industrial automation control panels, home appliance user interfaces, low-cost graphics terminals with PMP displays, USB peripherals and peripherals, and small-form-factor IoT edge nodes that need 32-bit performance without migrating to a higher-tier MCU.
A practical design tip: leverage Peripheral Pin Select (PPS) to route peripherals after pinout is locked, but remember that PPS remapping is per-function, not per-pin, so designers must still assign physical pads carefully to keep analog and digital paths separate on the 124-pin VTLA package.
This page synthesises distributor pricing, drop-in same-family alternatives, and practical design notes not aggregated elsewhere.
Alternatives de remplacement direct pour PIC32MX350F128LT-V/TL — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX350F128LT-V/TL (même facteur de forme et même empreinte) — différant par Package, Operating Temperature, Core Architecture, SPI / I2S, ADC.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX350F128LT-V/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.5 / unité
Voir la fiche technique →PIC32MX350F128LT-V/PT
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$4.31 / unité
Voir la fiche technique →PIC32MX350F128LT-I/TL
✅ Remplacement direct✓ En stock
$4.41 / unité
Voir la fiche technique →PIC32MX350F128LT-I/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.32 / unité
Voir la fiche technique →PIC32MX350F128HT-V/MR
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.18 / unité
Voir la fiche technique →PIC32MX350F128LT-V/TL Valeurs maximales et caractéristiques électriques
| Core Architecture | MIPS32 M4K |
| Largeur du bus de données | 32-bit |
| Maximum CPU Speed | 80 MHz |
| Program Memory (Flash) | 128 KB (128K x 8) |
| SRAM | 32 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Température de fonctionnement | -40 °C to +105 °C |
| Boîtier | 124-VTLA (9x9 mm) |
| Package Type | Surface Mount, Dual Row, Exposed Pad |
| Nombre de broches | 124 |
| ADC | 10-bit, up to 28 channels |
| Analog Comparators | 2 |
| I2C | 2 |
| SPI / I2S | 2 |
| UART / USART | Yes |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Timers | 5 x 16-bit |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (1 year) |
| Statut RoHS | Compliant |
Guide de configuration des broches du PIC32MX350F128LT-V/TL surface mount, dual row, exposed pad
Configuration des broches du PIC32MX350F128LT-V/TL (boîtier surface mount, dual row, exposed pad). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC32MX350F128LT-V/TL.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC32MX350F128LT-V/TL convient pour 7 applications: Industrial Control Panels, USB Peripherals, Home Appliance UI, Low-Cost Ethernet Nodes, Graphics Terminals with PMP, IoT Edge Sensor Hubs, Automotive Body Controllers.
Industrial Control Panels
The PIC32MX350F128LT-V/TL fits industrial HMI panels because its 80 MHz MIPS32 M4K core runs graphical menus faster than 8-bit predecessors, and 128 KB Flash holds full keypad/display state machines. The 124-pin VTLA exposes enough GPIO for matrix keypads, character LCDs, and LED bar graphs. Industrial-grade -40C to +105C operation tolerates cabinet heat. Built-in UART, SPI, and I2C simplify links to motor drives and sensors.
Recommandé
USB Peripherals
The PIC32MX350F128LT-V/TL's integrated USB 2.0 full-speed OTG controller makes it a natural fit for USB peripherals like HID controllers, USB-to-UART bridges, and low-cost data loggers. The 128 KB Flash holds USB stacks and application code; 32 KB SRAM accommodates HID ring buffers. The 124-pin VTLA footprint exposes dedicated USB D+/D- pads. No external PHY needed, reducing BOM and PCB area versus discrete USB chips.
Recommandé
Home Appliance UI
The PIC32MX350F128LT-V/TL suits home appliance user interfaces - washing machine panels, induction cooktops, and smart thermostats - where its 28-channel ADC reads multiple knob positions and NTC temperature sensors in parallel. The 128 KB Flash holds multilingual UI strings and capacitive touch libraries. The -40C to +105C range covers kitchen and laundry enclosures. PMP peripheral drives character LCDs without an external display controller.
Recommandé
Low-Cost Ethernet Nodes
The PIC32MX350F128LT-V/TL integrates a 10/100 Ethernet MAC that, paired with a low-cost PHY like the LAN8720, gives designers a sub-$10 networked MCU for sensors, smart plugs, and small appliances. The 32 KB SRAM buffers lightweight TCP/IP stacks. The 124-pin VTLA exposes RMII pads via PPS. Internal MII/RMII/mux eliminates external logic, simplifying PCB layout versus MCUs without an integrated MAC.
Recommandé
Graphics Terminals with PMP
The PIC32MX350F128LT-V/TL's Parallel Master Port (PMP) drives small parallel TFTs and OLEDs without a separate display controller IC. The 32 KB SRAM hosts double-buffered framebuffers for QVGA panels. The 80 MHz MIPS32 M4K core delivers 80 DMIPS - enough to render menus, gauges, and simple animations. Designers benefit from a 40x10 device footprint with USB for touchscreens and Ethernet for remote management.
Recommandé
IoT Edge Sensor Hubs
The PIC32MX350F128LT-V/TL aggregates multiple sensors via I2C, SPI, and UART for IoT edge hubs - small-form-factor devices bridging peripherals to local processing. The 28-channel ADC scans analog sensors while digital buses connect environmental, motion, and gas sensors. Built-in USB and Ethernet provide either local console or networked telemetry. -40 °C to +105 °C supports outdoor enclosures and factory floors.
Recommandé
Automotive Body Controllers
The PIC32MX350F128LT-V/TL suits non-safety automotive body controllers - door modules, seat controllers, lighting nodes - where its 80 MHz MIPS32 M4K core runs CAN-capable stacks and the extended -40C to +105C range handles cabin temperatures. LINbus connectivity directly interfaces body electronics without external transceivers. 128 KB Flash stores calibration and variant data; 32 KB SRAM buffers diagnostic logs.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX350F128LT-V/TL — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX350F128LT-I/TL | PIC32MX350F128LT-V/PF | PIC32MX350F128LT-V/PT | PIC32MX350F128HT-V/MR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 124-VTLA (9x9 mm) | 124-VTLA (9x9 mm) - same | 100-TQFP - different | 100-TQFP - different | 64-QFN - different |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Maximum CPU Speed | 80 MHz | 80 MHz | 80 MHz | 80 MHz | 80 MHz |
| Operating Temperature | -40C to +105C (extended) | -40C to +85C (industrial) | -40C to +105C (extended) | -40C to +105C (extended) | -40C to +105C (extended) |
| Core Architecture | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| USB 2.0 FS | Yes (OTG) | Yes (OTG) | Yes (OTG) | Yes (OTG) | Yes (OTG) |
| Ethernet MAC | 10/100 MAC | 10/100 MAC | 10/100 MAC | 10/100 MAC | 10/100 MAC |
Principaux différenciateurs
- Highest pin count in PIC32MX350 family (vs PIC32MX350F128HT-V/MR)
- Extended temperature grade -40C to +105C (vs PIC32MX350F128LT-I/TL)
- Integrated USB 2.0 OTG and Ethernet MAC in mid-density Flash tier (vs PIC32MX330F064L-I/TL)
Notes de conception
The PIC32MX350F128LT-V/TL's VTLA-9x9 package dissipates up to ~500 mW at 80 MHz with full peripheral activity. Estimated: at 3.3 V core, internal current is roughly 60 mA (3.3 V x 60 mA = 200 mW), plus I/O loading. The exposed thermal pad MUST be soldered to a continuous ground copper pour of at least 1 sq cm; failure to do so can raise junction temperature by 15-20 C above datasheet curves. For high-temperature industrial environments, use a 4-layer PCB with a dedicated ground plane for thermal relief.
Route the 50 MHz Ethernet RMII traces as a matched-length group with 50 ohm impedance to the external PHY. Keep USB D+/D- as a 90-ohm differential pair. Place the 12 MHz primary crystal within 5 mm of the OSC1/OSC2 pads, with a guarded ground ring around the crystal traces. Decouple VDD with 100 nF ceramic caps adjacent to every VDD pin and a single bulk 4.7 uF tantalum within 10 mm.
Avoid the common mistake of leaving unused I/O as inputs - floating inputs on PIC32MX can draw several mA in aggregate and cause spurious interrupts. Configure unused I/O as outputs driving low. Do not exceed 3.6 V on any I/O; the PIC32MX350 is NOT 5V tolerant. When using PPS, remap functions in the device header rather than directly writing registers - register macros handle unlock sequences that prevent lockout.
Use a low-noise LDO such as MCP1700B or MIC29150 for the 3.3 V rail - the PIC32MX350's ADC accuracy degrades if the supply ripple exceeds 30 mV pk-pk. Keep the LDO within 50 mm of the VDD pins and use a star-ground layout to isolate analog and digital returns. Add a 10 uF bulk cap on VDDIO and AVDD separately to reduce ADC reference noise.
Informations de conformité
RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free assembly compatible. Not AEC-Q100 qualified - this is an industrial/extended-grade part. For automotive safety-critical applications, choose a PIC32MX with AEC-Q100 qualification such as the automotive-grade PIC32MX variants.