Microchip Technology

PIC32MX350F128LT-V/TL - 32-bit 80MHz MCU 128KB Flash | Microchip

부품 번호: PIC32MX350F128LT-V/TL ✓ 활성
재고 있음 영업일 기준 1~3일 내 발송
2.3 V to 3.6 V Vdss 124-VTLA (9x9 mm) Package 80 MHz Speed 128 KB (128K x 8) Memory
시작가 $3.74 USD / 개
MOQ: 1 |
가격 업데이트: 2026-10-02
볼륨 가격
수량 단가 합계
1 $5.95 $5.95
10 $5.34 $53.40
100 $4.76 $476.00
500 $4.21 $2,105.00
1,000 $3.74 $3,740.00
ℹ️ 모든 가격은 USD 기준입니다

PIC32MX350F128LT-V/TL 개요

The Microchip Technology PIC32MX350F128LT-V/TL is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 124-pin VTLA (9x9 mm) package. It is part of the PIC32MX3/4 family, which combines 32-bit compute density with a broad set of integrated peripherals including two SPI/I2S, two I2C, five 16-bit timers, two analog comparators, and a 10-bit ADC with up to 28 analog channels.

A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals on one die. The PIC32MX3/4 family sits within the broader taxonomy: microcontroller -> SoC -> semiconductor. PIC32 MX-series devices implement the MIPS32 M4K core, a RISC architecture that runs most instructions in a single cycle, enabling deterministic real-time behaviour. The 32-bit data path and Harvard memory architecture give PIC32 MCUs more headroom than 8-bit or 16-bit predecessors while keeping the peripheral ecosystem familiar to PIC users.

Key features of the PIC32MX350F128LT-V/TL include 128 KB Flash (128K x 8), 32 KB SRAM, an operating voltage range of 2.3 V to 3.6 V, industrial-grade -40°C to +105°C temperature range, and a Peripheral Pin Select (PPS) engine that allows most digital peripherals to be remapped to almost any I/O. The device also includes a Parallel Master Port (PMP), USB 2.0 full-speed OTG controller, 10/100 Ethernet MAC, and capacitive touch hardware support - features unusual for an MCU at this flash density.

Typical applications include industrial automation control panels, home appliance user interfaces, low-cost graphics terminals with PMP displays, USB peripherals and peripherals, and small-form-factor IoT edge nodes that need 32-bit performance without migrating to a higher-tier MCU.

A practical design tip: leverage Peripheral Pin Select (PPS) to route peripherals after pinout is locked, but remember that PPS remapping is per-function, not per-pin, so designers must still assign physical pads carefully to keep analog and digital paths separate on the 124-pin VTLA package.

This page synthesises distributor pricing, drop-in same-family alternatives, and practical design notes not aggregated elsewhere.

드롭인 대체품: PIC32MX350F128LT-V/TL — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PIC32MX350F128LT-V/TL (동일 폼 팩터 및 풋프린트) — 차이점: Package, Operating Temperature, Core Architecture, SPI / I2S, ADC.

Microchip Technology
Package: 64-pin VQFN (MR) 9x9 mm with EP
Operating Temperature: -40 C to +105 C (-V grade)
Core Architecture: MIPS32 M4K 32-bit RISC
Microchip Technology
Package: 100-pin TQFP (PF), 14x14 mm
Core Architecture: MIPS32 M4K 32-bit RISC
Microchip Technology
Package: 124-pin VTLA EP
Operating Temperature: -40 C to +85 C (Industrial)
ADC: 10-bit, up to 28 channels, 1 Msps
Microchip Technology
Package: 100-pin TQFP (14x14 mm, 0.5 mm pitch)
Core Architecture: MIPS32 M4K 32-bit RISC
SPI / I2S: 2 modules
Microchip Technology
Package: 100-TQFP (PT), 12x12 mm, 0.4 mm pitch
Operating Temperature: -40C to +105C (automotive -V grade)
Core Architecture: MIPS32 M4K (32-bit RISC)
Microchip Technology
Package: 124-pin VTLA (9x9 mm) with exposed pad
Operating Temperature: -40 C to +105 C (automotive 'V' grade)
Core Architecture: RISC 32-bit, single-core

빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:

PIC32MX350F128LT-V/PF

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 100-TQFP (PF)
MIPS32 M4K 32-bit RISC · 80 MHz · 102 DMIPS (1.53 DMIPS/MHz) · 128 KB · 32 KB · 2.3 V to 3.6 V · -40C to +105C (automotive -V grade) · 10-bit, 28 channels, 1 Msps

✓ 재고 있음

$3.5 / 개

데이터시트 보기 →

PIC32MX350F128LT-V/PT

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 100-TQFP (PT)
MIPS32 M4K (32-bit RISC) · 80 MHz · 105 DMIPS · 128 KB (128K x 8) · 32 KB · 2.3 V to 3.6 V · 85 · 10-bit, up to 28 channels, 1 Msps

✓ 재고 있음

$4.31 / 개

데이터시트 보기 →

PIC32MX350F128LT-I/TL

✅ 드롭인
Microchip Technology
📦 124-VTLA (TL)
MIPS32 M4K · 32-bit · 80 MHz (100 DMIPS) · 128 KB · 32 KB · 2.5 V to 3.6 V · 85 · 10-bit, up to 28 channels, 1 Msps

✓ 재고 있음

$4.41 / 개

데이터시트 보기 →

PIC32MX350F128LT-I/PF

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 100-TQFP (PF)
MIPS32 M4K 32-bit RISC · 100 MHz (this part operates at 80 MHz) · 131 DMIPS at 100 MHz · 128 KB (plus 12 KB auxiliary) · 32 KB · 2.3 V to 3.6 V · -40 C to +105 C (industrial grade) · 83 (on 100-pin TQFP)

✓ 재고 있음

$3.32 / 개

데이터시트 보기 →

PIC32MX350F128HT-V/MR

✅ 드롭인 ⚠️ 사양 미검증
Microchip Technology
📦 64-QFN (MR)
MIPS32 M4K 32-bit RISC · 80 MHz · 128 KB (128K x 8) · 32 KB · 2.3 V to 3.6 V · 5V tolerant digital I/O · -40 C to +105 C (-V grade) · 53

✓ 재고 있음

$3.18 / 개

데이터시트 보기 →

PIC32MX350F128LT-V/TL 최대 정격 & 전기적 특성

Core Architecture MIPS32 M4K
데이터 버스 폭 32-bit
Maximum CPU Speed 80 MHz
Program Memory (Flash) 128 KB (128K x 8)
SRAM 32 KB
Operating Voltage 2.3 V to 3.6 V
동작 온도 -40 °C to +105 °C
패키지 124-VTLA (9x9 mm)
Package Type Surface Mount, Dual Row, Exposed Pad
핀 수 124
ADC 10-bit, up to 28 channels
Analog Comparators 2
I2C 2
SPI / I2S 2
UART / USART Yes
Connectivity I2C, IrDA, LINbus, PMP, SPI, UART/USART
Timers 5 x 16-bit
실장 유형 Surface Mount
MSL 레벨 3 (1 year)
RoHS 상태 Compliant

PIC32MX350F128LT-V/TL surface mount, dual row, exposed pad 핀 구성 가이드

PIC32MX350F128LT-V/TL(surface mount, dual row, exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

PIC32MX350F128LT-V/TL의 surface mount, dual row, exposed pad 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PIC32MX350F128LT-V/TL.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PIC32MX350F128LT-V/TL 적합 용도: 7 애플리케이션s: Industrial Control Panels, USB Peripherals, Home Appliance UI, Low-Cost Ethernet Nodes, Graphics Terminals with PMP, IoT Edge Sensor Hubs, Automotive Body Controllers.

🏭

Industrial Control Panels

The PIC32MX350F128LT-V/TL fits industrial HMI panels because its 80 MHz MIPS32 M4K core runs graphical menus faster than 8-bit predecessors, and 128 KB Flash holds full keypad/display state machines. The 124-pin VTLA exposes enough GPIO for matrix keypads, character LCDs, and LED bar graphs. Industrial-grade -40C to +105C operation tolerates cabinet heat. Built-in UART, SPI, and I2C simplify links to motor drives and sensors.

🔌

USB Peripherals

The PIC32MX350F128LT-V/TL's integrated USB 2.0 full-speed OTG controller makes it a natural fit for USB peripherals like HID controllers, USB-to-UART bridges, and low-cost data loggers. The 128 KB Flash holds USB stacks and application code; 32 KB SRAM accommodates HID ring buffers. The 124-pin VTLA footprint exposes dedicated USB D+/D- pads. No external PHY needed, reducing BOM and PCB area versus discrete USB chips.

🏠

Home Appliance UI

The PIC32MX350F128LT-V/TL suits home appliance user interfaces - washing machine panels, induction cooktops, and smart thermostats - where its 28-channel ADC reads multiple knob positions and NTC temperature sensors in parallel. The 128 KB Flash holds multilingual UI strings and capacitive touch libraries. The -40C to +105C range covers kitchen and laundry enclosures. PMP peripheral drives character LCDs without an external display controller.

🌐

Low-Cost Ethernet Nodes

The PIC32MX350F128LT-V/TL integrates a 10/100 Ethernet MAC that, paired with a low-cost PHY like the LAN8720, gives designers a sub-$10 networked MCU for sensors, smart plugs, and small appliances. The 32 KB SRAM buffers lightweight TCP/IP stacks. The 124-pin VTLA exposes RMII pads via PPS. Internal MII/RMII/mux eliminates external logic, simplifying PCB layout versus MCUs without an integrated MAC.

📺

Graphics Terminals with PMP

The PIC32MX350F128LT-V/TL's Parallel Master Port (PMP) drives small parallel TFTs and OLEDs without a separate display controller IC. The 32 KB SRAM hosts double-buffered framebuffers for QVGA panels. The 80 MHz MIPS32 M4K core delivers 80 DMIPS - enough to render menus, gauges, and simple animations. Designers benefit from a 40x10 device footprint with USB for touchscreens and Ethernet for remote management.

🧩

IoT Edge Sensor Hubs

The PIC32MX350F128LT-V/TL aggregates multiple sensors via I2C, SPI, and UART for IoT edge hubs - small-form-factor devices bridging peripherals to local processing. The 28-channel ADC scans analog sensors while digital buses connect environmental, motion, and gas sensors. Built-in USB and Ethernet provide either local console or networked telemetry. -40 °C to +105 °C supports outdoor enclosures and factory floors.

🚗

Automotive Body Controllers

The PIC32MX350F128LT-V/TL suits non-safety automotive body controllers - door modules, seat controllers, lighting nodes - where its 80 MHz MIPS32 M4K core runs CAN-capable stacks and the extended -40C to +105C range handles cabin temperatures. LINbus connectivity directly interfaces body electronics without external transceivers. 128 KB Flash stores calibration and variant data; 32 KB SRAM buffers diagnostic logs.

추천 제품 요약

PIC32MX350F128LT-I/TL Microchip Technology 사용처: Industrial Control Panels MCP2515 external CAN controller for fieldbus 사용처: Industrial Control Panels, Automotive Body Controllers PIC32MX350F128HT-V/MR Microchip Technology 사용처: USB Peripherals PIC32MX350F128LT-V/PF Microchip Technology 사용처: Home Appliance UI LAN8720A RMII Ethernet PHY 사용처: Low-Cost Ethernet Nodes PIC32MX350F128LT-V/PT Microchip Technology 사용처: Graphics Terminals with PMP MCP9808 high-accuracy temperature sensor 사용처: IoT Edge Sensor Hubs
What is the operating voltage range of PIC32MX350F128LT-V/TL?
The PIC32MX350F128LT-V/TL operates from 2.3 V to 3.6 V, supporting the standard 3.3 V logic rail typical of PIC32MX3/4 designs. The datasheet specifies 3.6 V as the absolute maximum VDD - exceeding it may damage internal flash regulators. Use an LDO upstream rated for at least 250 mA to supply VDD, VDDIO, and AVDD rails.
How much Flash and RAM does the PIC32MX350F128LT-V/TL have?
The PIC32MX350F128LT-V/TL integrates 128 KB (128K x 8) of Flash program memory and 32 KB of SRAM. This places it in the mid-density tier of the PIC32MX3/4 family - dense enough for USB stacks, lightweight TCP/IP, and graphics buffers, while leaving headroom for application code in cost-sensitive industrial designs.
What is the maximum clock speed of the PIC32MX350F128LT-V/TL?
The PIC32MX350F128LT-V/TL runs up to 80 MHz on the MIPS32 M4K core, which executes most instructions in a single cycle - delivering up to 80 DMIPS. The PIC32MX3/4 family headline figure is 120 MHz/150 DMIPS, but the 350 sub-family is specifically binned to 80 MHz to manage power and thermal envelopes in the 124-pin VTLA package.
Does the PIC32MX350F128LT-V/TL support USB or Ethernet?
Yes, the PIC32MX350F128LT-V/TL integrates a USB 2.0 full-speed OTG controller and a 10/100 Ethernet MAC. Both require an external PHY for Ethernet and pull-up resistor for USB. The USB module uses a dedicated internal transceiver, while Ethernet requires an external MII/RMII PHY connected via PPS-mapped I/O.
What package is the PIC32MX350F128LT-V/TL supplied in?
The PIC32MX350F128LT-V/TL ships in a 124-pin VTLA package measuring 9x9 mm with a dual-row layout and an exposed thermal pad. VTLA (Very Thin Land Array) is Microchip's thin-profile fine-pitchable LGA variant; the exposed pad must be soldered to a ground copper pour for thermal relief and signal reference.
Where can I buy the PIC32MX350F128LT-V/TL?
The PIC32MX350F128LT-V/TL is in stock at major authorised distributors such as DigiKey, Hotenda, Microchip USA, Mouser, and Xecor as of 2026-10-02. For the latest stock and lead-time, consult distributor real-time quoting tools; Microchip Direct typically has shorter lead times for production-volume orders.
What is the price of the PIC32MX350F128LT-V/TL?
PIC32MX350F128LT-V/TL pricing as of 2026-10-02 is approximately USD 5.95 at qty 1, USD 4.76 at qty 100, scaling to USD 3.74 at qty 1000 on tape-and-reel packaging. Distributor pricing varies with stock depth and reel size - check DigiKey and Mouser for current breaks; Microchip Direct publishes volume-tier pricing for OEM orders.
What is the lead time for the PIC32MX350F128LT-V/TL?
Lead time for PIC32MX350F128LT-V/TL is typically 4-8 weeks from Microchip Direct and 1-4 weeks from authorised distributors as of 2026-10-02, depending on stock depth. Distributors reporting 2900 units in stock typically ship within 1-2 business days; production-volume orders through Microchip Direct should be placed 12 weeks ahead to absorb allocation cycles.
Is PIC32MX350F128LT-V/TL in stock?
Yes, the PIC32MX350F128LT-V/TL is currently reported as available as of 2026-10-02. Distributor listings indicate active inventory at DigiKey, Mouser, and Microchip USA, with thousands of units on hand across authorised channels. For live stock, query distributor APIs directly - stock depth can shift daily during allocation events.
What is the difference between PIC32MX350F128LT-V/TL and PIC32MX350F128LT-I/TL?
PIC32MX350F128LT-V/TL is the automotive/extended-temperature grade (-40 °C to +105 °C and qualified to VMC class) while the PIC32MX350F128LT-I/TL is the industrial-grade variant with the same -40 °C to +85 °C range. Both share the same VTLA package, 128 KB Flash, and 32 KB SRAM, making them pin-compatible drop-in substitutes on the same PCB.
What is the difference between PIC32MX350F128LT-V/TL and PIC32MX330F064L-I/TL?
The PIC32MX350F128LT-V/TL offers 128 KB Flash and 32 KB SRAM in a 124-pin VTLA package, while the PIC32MX330F064L-I/TL offers only 64 KB Flash and 16 KB SRAM in a 100-pin VTLA package. The PIC32MX350 has twice the memory and more I/O, but they are NOT pin-to-pin compatible because of the 124-pin vs 100-pin difference - a true drop-in replacement requires the same 124-pin VTLA footprint.
When should I choose PIC32MX350F128LT-V/TL over PIC32MX340F256H-80V/PT?
Choose PIC32MX350F128LT-V/TL when you need a 32-bit MIPS32 M4K MCU in a fine-pitch 124-pin VTLA package for compact, high-I/O designs. The PIC32MX340F256H-80V/PT is a 256 KB Flash variant in a more conventional 100-pin TQFP package - choose it only when you need extra code space and prefer a TQFP for hand-solderable prototyping. Both run at 80 MHz but differ in memory and package.
What is the best drop-in replacement for PIC32MX350F128LT-V/TL?
The closest drop-in replacement for PIC32MX350F128LT-V/TL is PIC32MX350F128LT-I/TL (industrial-grade, same 124-pin VTLA, 128 KB Flash, 32 KB SRAM). It is pin-to-pin compatible and uses identical firmware; only the operating temperature grade changes. For other drop-in options in the same family with different memory densities, browse the PIC32MX350 series at 80 MHz/124-pin VTLA.
Where to download PIC32MX350F128LT-V/TL datasheet PDF?
The official PIC32MX1xx/2xx/3xx/4xx datasheet (document DS60001185H) is available at Microchip's website; the family reference manual covers PIC32MX330/350/370/430/450/470. Search the Microchip documentation portal using the device family name, or use the part number on DigiKey's product page to access a PDF mirror of the datasheet.
Where to find PIC32MX350F128LT-V/TL pinout?
The full pinout of PIC32MX350F128LT-V/TL is documented in the PIC32MX330/350/370/430/450/470 datasheet (DS60001185H), section 'Pin Diagrams' and 'Pinout Pin Descriptions'. For quick reference, Microchip's MPLAB X IDE pinout view shows all 124 pins of the VTLA package. Pin 1 is located by the orientation mark on the top of the package.
What are the key specifications of PIC32MX350F128LT-V/TL that engineers should know?
The PIC32MX350F128LT-V/TL integrates an 80 MHz MIPS32 M4K core, 128 KB Flash, 32 KB SRAM, 2.3-3.6 V supply, USB 2.0 FS OTG, 10/100 Ethernet MAC, 28-channel 10-bit ADC, two analog comparators, 2x I2C, 2x SPI/I2S, UART, and PMP in a 124-pin VTLA. Operating temperature is -40 °C to +105 °C. PPS peripheral mapping allows flexible I/O routing for compact PCB layouts.

엔지니어링 참조 데이터: PIC32MX350F128LT-V/TL — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PIC32MX350F128LT-V/TL when you need a 32-bit MIPS32 M4K MCU with USB 2.0 FS OTG and 10/100 Ethernet MAC in a high-I/O 124-pin VTLA package, operating in extended -40C to +105C environments. For industrial-grade designs limited to +85C, swap to PIC32MX350F128LT-I/TL with the same 124-pin VTLA footprint. For prototype-friendly TQFP packages, choose PIC32MX350F128LT-V/PF (100-pin) but plan for fewer GPIO. For compact 64-pin designs, choose PIC32MX350F128HT-V/MR but expect a halved peripheral set. The PIC32MX350F128LT-V/TL is the correct choice when both USB and Ethernet must coexist with extensive GPIO for industrial panels, PMP displays, or sensor hubs.

대체품과의 비교

파라미터 이 제품 PIC32MX350F128LT-I/TL PIC32MX350F128LT-V/PF PIC32MX350F128LT-V/PT PIC32MX350F128HT-V/MR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 124-VTLA (9x9 mm) 124-VTLA (9x9 mm) - same 100-TQFP - different 100-TQFP - different 64-QFN - different
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB
SRAM 32 KB 32 KB 32 KB 32 KB 32 KB
Maximum CPU Speed 80 MHz 80 MHz 80 MHz 80 MHz 80 MHz
Operating Temperature -40C to +105C (extended) -40C to +85C (industrial) -40C to +105C (extended) -40C to +105C (extended) -40C to +105C (extended)
Core Architecture MIPS32 M4K MIPS32 M4K MIPS32 M4K MIPS32 M4K MIPS32 M4K
USB 2.0 FS Yes (OTG) Yes (OTG) Yes (OTG) Yes (OTG) Yes (OTG)
Ethernet MAC 10/100 MAC 10/100 MAC 10/100 MAC 10/100 MAC 10/100 MAC

주요 차별점

  • Highest pin count in PIC32MX350 family (vs PIC32MX350F128HT-V/MR)
  • Extended temperature grade -40C to +105C (vs PIC32MX350F128LT-I/TL)
  • Integrated USB 2.0 OTG and Ethernet MAC in mid-density Flash tier (vs PIC32MX330F064L-I/TL)

설계 노트

The PIC32MX350F128LT-V/TL's VTLA-9x9 package dissipates up to ~500 mW at 80 MHz with full peripheral activity. Estimated: at 3.3 V core, internal current is roughly 60 mA (3.3 V x 60 mA = 200 mW), plus I/O loading. The exposed thermal pad MUST be soldered to a continuous ground copper pour of at least 1 sq cm; failure to do so can raise junction temperature by 15-20 C above datasheet curves. For high-temperature industrial environments, use a 4-layer PCB with a dedicated ground plane for thermal relief.

Route the 50 MHz Ethernet RMII traces as a matched-length group with 50 ohm impedance to the external PHY. Keep USB D+/D- as a 90-ohm differential pair. Place the 12 MHz primary crystal within 5 mm of the OSC1/OSC2 pads, with a guarded ground ring around the crystal traces. Decouple VDD with 100 nF ceramic caps adjacent to every VDD pin and a single bulk 4.7 uF tantalum within 10 mm.

Avoid the common mistake of leaving unused I/O as inputs - floating inputs on PIC32MX can draw several mA in aggregate and cause spurious interrupts. Configure unused I/O as outputs driving low. Do not exceed 3.6 V on any I/O; the PIC32MX350 is NOT 5V tolerant. When using PPS, remap functions in the device header rather than directly writing registers - register macros handle unlock sequences that prevent lockout.

Use a low-noise LDO such as MCP1700B or MIC29150 for the 3.3 V rail - the PIC32MX350's ADC accuracy degrades if the supply ripple exceeds 30 mV pk-pk. Keep the LDO within 50 mm of the VDD pins and use a star-ground layout to isolate analog and digital returns. Add a 10 uF bulk cap on VDDIO and AVDD separately to reduce ADC reference noise.

규정 준수 정보

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Yes
분쟁 광물
Compliant

RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free assembly compatible. Not AEC-Q100 qualified - this is an industrial/extended-grade part. For automotive safety-critical applications, choose a PIC32MX with AEC-Q100 qualification such as the automotive-grade PIC32MX variants.

데이터 검증일: 2026-10-02 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PIC32MX350F128LT-V/TL PIC32MX350F128LT-V/TL datasheet Microchip PIC32MX350F128L PIC32MX 80MHz 128KB Flash 32KB SRAM 124-pin VTLA microcontroller 9x9mm PIC32MX350 USB Ethernet microcontroller PIC32MX350F128LT-V/TL vs PIC32MX350F128LT-I/TL PIC32MX350F128LT-V/TL drop-in replacement buy PIC32MX350F128LT-V/TL what is MIPS32 M4K core PIC32MX350 pinout VTLA PIC32MX PMP peripheral display

관련 부품 & 용어

Microchip Technology PIC32MX350F128LT-V/TL PIC32MX350F128LT-I/TL PIC32MX350F128LT-V/PF PIC32MX350F128LT-V/PT PIC32MX350F128HT-V/MR PIC32MX3/4 MIPS32 M4K MIPS32 microcontroller MCU 32-bit MCU VTLA VTLA-124 TQFP-100 QFN-64 RoHS REACH USB 2.0 USB OTG Ethernet MAC 10/100 Ethernet RMII MII SPI I2C UART LINbus PMP Peripheral Pin Select PPS Parallel Master Port 10-bit ADC analog comparator capacitive touch MPLAB X IDE industrial control USB peripheral home appliance IoT edge node automotive body controller MCP2515 LAN8720A MCP9808
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
합계: $0.00 USD
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기