PIC32MX350F256LT-V/PF - 80MHz 32-bit MCU 256KB Flash TQFP-100
Référence : PIC32MX350F256LT-V/PF ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.22 | $9,22 |
| 10 | $8.5 | $85,00 |
| 100 | $7.54 | $754,00 |
| 500 | $6.85 | $3 425,00 |
| 1 000 | $6.2 | $6 200,00 |
PIC32MX350F256LT-V/PF Présentation
Background knowledge - what is a PIC32MX3xx microcontroller: The PIC32MX3xx family is part of the broader PIC32MX family of 32-bit microcontrollers built around the MIPS32 M4K core, a Harvard-architecture RISC processor with single-cycle multiply and hardware divide. PIC32MX3xx sits between PIC32MX1/2 (lower pin count, smaller memory) and PIC32MX4/5/6/7 (higher pin count, larger memory and Ethernet). It is positioned in the broader microcontroller taxonomy as a mid-tier MCU: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MX3/4 sub-family. The M4K core delivers 1.53 DMIPS/MHz and up to 150 DMIPS at 80 MHz, giving meaningful headroom for RTOS-driven and DSP-light workloads versus 8-bit PIC16/AVR alternatives.
Key specifications include 256 KB Flash (with 12 KB auxiliary Flash for data), 64 KB SRAM, 16 KB USB RAM (accessible to the CPU when USB is not used), an 8 MHz internal oscillator (with PLL up to 80 MHz), and CTMU / mTouch capacitive touch support. The device supports 5V-tolerant I/O, an operating voltage of 2.3V to 3.6V, and is offered in TQFP-100, TQFP-64, QFN-64, and die/die-package options. JTAG and 2-wire programming/debug interfaces are available via the MIPS-standard ICSP and Trace ports.
Typical applications include industrial control panels, USB HID/CDC peripherals, low-cost graphical HMI (paired with segmented LCD or color TFT via PMP), motor control companion MCUs, and connected sensor hubs. The V-temp grade specifically suits outdoor enclosures, factory automation, and automotive under-hood-adjacent environments. When designing, ensure the 100-pin TQFP PCB footprint has at least four-layer routing for decoupling and high-speed USB; allow adequate via fan-out under the exposed die pad if migrating to a TQFP variant without EPAD. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternatives de remplacement direct pour PIC32MX350F256LT-V/PF — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec PIC32MX350F256LT-V/PF (même facteur de forme et même empreinte) — différant par ADC, Package, Timers, USB, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
PIC32MX250F256L-V/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$3.4 / unité
Voir la fiche technique →PIC32MX150F256L-V/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
PIC32MX270F512L-V/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$5.1 / unité
Voir la fiche technique →PIC32MX170F512L-V/PF
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$5.85 / unité
Voir la fiche technique →STM32F105VCT6
✅ Remplacement direct✓ En stock
$5.4 / unité
LPC1768FBD100
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
PIC32MX350F256LT-V/PF Valeurs maximales et caractéristiques électriques
| Architecture | MIPS32 M4K 32-bit RISC |
| CPU Core | MIPS32 M4K |
| Maximum CPU Frequency | 80 MHz |
| Performance | 1.53 DMIPS/MHz, up to 150 DMIPS |
| Program Flash | 256 KB (256K x 8) |
| Auxiliary Flash | 12 KB |
| SRAM | 64 KB |
| USB Dedicated RAM | 16 KB (CPU-accessible if USB disabled) |
| Operating Voltage | 2.3 V to 3.6 V |
| Temperature Grade (V) | -40 C to +105 C |
| Analog Comparators | 2 |
| I2C | 2 |
| SPI / I2S | 2 (SPI with I2S mode) |
| UART | 6 |
| USB | USB 2.0 Full-Speed Device/Host/OTG |
| ADC | 10-bit, 1 Msps, up to 28 channels |
| Timers | 5 x 16-bit, 5 x 32-bit (combined) |
| Parallel Master Port (PMP) | Yes (8/16-bit) |
| CTMU / mTouch | Yes |
| Boîtier | TQFP-100 (PF), 14x14 mm |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (168 hours) |
| Statut RoHS | Compliant |
| Programming/Debug | ICSP (2-wire), JTAG, Trace |
Guide de configuration des broches du PIC32MX350F256LT-V/PF tqfp-100 (pf), 14x14 mm
Configuration des broches du PIC32MX350F256LT-V/PF (boîtier tqfp-100 (pf), 14x14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour PIC32MX350F256LT-V/PF.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
PIC32MX350F256LT-V/PF convient pour 6 applications: USB HID and CDC Peripherals, Industrial Control Panels with Graphical HMI, Low-Cost Motor Control Companion MCU, Connected Sensor Hubs with USB Diagnostics, Automotive Dashboard-Adjacent Modules, Portable USB-Powered Test Instruments.
USB HID and CDC Peripherals
The PIC32MX350F256LT-V/PF is well matched to USB Human Interface Device (HID) and Communications Device Class (CDC) peripherals because it integrates a USB 2.0 Full-Speed controller with OTG support and 16 KB of dedicated USB packet RAM. Designers can implement keyboards, mice, custom HID game controllers, or virtual COM port devices without an external USB transceiver, saving 1.5 to 2 dollars of BOM cost versus MCU + external PHY designs. The 80 MHz MIPS M4K core provides ample headroom for USB polling, HID report parsing, and a small RTOS that handles command queuing. At V-temp grade, this part operates reliably inside industrial enclosures or under automotive dashboards.
Recommandé
Industrial Control Panels with Graphical HMI
The PIC32MX350F256LT-V/PF drives mid-resolution color TFT displays through its Parallel Master Port (PMP) at up to 25 MHz pixel clock while still servicing capacitive touch inputs through the CTMU/mTouch peripheral. Industrial panel designers favor this part because it integrates PMP, CTMU, five 16-bit timers, and USB in one chip, replacing a discrete LCD controller plus MCU. The 256 KB Flash accommodates Segger emWin or Microchip's MLA graphics libraries along with a full PID control loop. V-temp grade -40 C to +105 C is required for outdoor panels in factory automation lines or solar-exposed kiosks.
Recommandé
Low-Cost Motor Control Companion MCU
The PIC32MX350F256LT-V/PF pairs as a companion MCU with dedicated motor control ICs such as the dsPIC33 or gate-driver pre-drivers. The MIPS32 M4K core runs a CANopen or EtherCAT communication stack, while the host motor controller handles torque loop closure. With five 16-bit timers generating six PWM channels and two analog comparators for current sensing, the 350 can also perform closed-loop control for sensorless BLDC fans or pumps below 100 W. The V-temp grade tolerates proximity to motor windings where temperatures can reach 100 C in sealed enclosures.
Recommandé
Connected Sensor Hubs with USB Diagnostics
The PIC32MX350F256LT-V/PF aggregates sensor data from SPI and I2C peripherals and exposes the readings to a host computer via USB CDC virtual COM port for diagnostics logging. Each of the two SPI/I2S ports and two I2C ports supports concurrent sensor transactions, and six UARTs provide backup serial debug channels. The 64 KB SRAM can buffer up to 8 seconds of 1 kHz sensor telemetry without host intervention. Industrial sensor hubs benefit from the V-temp grade for outdoor or process-plant mounting.
Recommandé
Automotive Dashboard-Adjacent Modules
While the PIC32MX350F256LT-V/PF is not AEC-Q100 qualified, the V-temp grade -40 C to +105 C allows deployment in cabin and trunk-located automotive modules where under-hood thermal stress is absent. Common use cases include aftermarket infotainment controllers, OBD-II diagnostic interfaces with USB host logging, and cabin climate control HMIs. The 100-pin TQFP package provides enough I/O for LCD, button matrix, rotary encoders, and CAN bus interfacing through external transceivers. For full AEC-Q100 automotive qualification, designers must migrate to the PIC32MK or dsPIC33AEC families instead.
Recommandé
Portable USB-Powered Test Instruments
Battery- and USB-powered bench instruments such as simple logic analyzers, bench multimeter front-ends, and educational oscilloscopes use the PIC32MX350F256LT-V/PF as their USB device controller and main CPU. The 10-bit 1 Msps ADC handles 28 channels of analog input at sufficient bandwidth for sub-100 kHz signal capture, while USB CDC delivers the waveform data to a host PC. The 80 MHz core decodes SPI, I2C, or UART protocols in real time without dropping samples. V-temp grade supports harsh lab environments with unstable thermal conditions.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour PIC32MX350F256LT-V/PF — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | PIC32MX250F256L-V/PF | PIC32MX150F256L-V/PF | PIC32MX270F512L-V/PF | STM32F105VCT6 | LPC1768FBD100 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | STMicroelectronics | NXP Semiconductors |
| Package | TQFP-100 (PF) 14x14 mm | TQFP-100 (PF) - same | TQFP-100 (PF) - same | TQFP-100 (PF) - same | LQFP-100 - same footprint | LQFP-100 - same footprint |
| CPU Core | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | MIPS32 M4K 32-bit | ARM Cortex-M3 | ARM Cortex-M3 |
| Max Frequency | 80 MHz | 80 MHz | 80 MHz (50 MHz variant exists) | 80 MHz (50 MHz variant exists) | 72 MHz | 100 MHz |
| Flash | 256 KB | 256 KB | 256 KB | 512 KB | 256 KB | 512 KB |
| SRAM | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB | 64 KB |
| USB | USB 2.0 FS Device/Host/OTG | No | No | No | USB 2.0 FS OTG + CAN | USB 2.0 FS Host/Device/OTG + Ethernet |
| Temperature Grade | V-grade -40 C to +105 C | V-grade -40 C to +105 C | V-grade -40 C to +105 C | V-grade -40 C to +105 C | -40 C to +85 C (industrial) | -40 C to +85 C (industrial) |
Principaux différenciateurs
- Only 100-pin TQFP PIC32MX3 family variant with USB OTG (vs PIC32MX250F256L-V/PF)
- Drop-in replacement with double Flash (vs PIC32MX270F512L-V/PF)
- Cortex-M3 cross-brand upgrade with Ethernet (vs LPC1768FBD100)
Notes de conception
The PIC32MX350F256LT-V/PF operates from 2.3V to 3.6V and draws approximately 70 mA active at 80 MHz across all peripherals enabled. Use a ferrite bead plus 10 uF + 100 nF + 10 nF decoupling network on AVDD and a separate 100 nF + 1 uF on VDDUSB to isolate the USB PHY supply from digital switching noise. The internal 8 MHz Fast RC oscillator with PLL is typically stable to within +/- 2 percent across the V-temp range, but USB Full-Speed requires an external 48 MHz crystal referenced through the USB PLL branch for compliance. Estimated: based on typical values from the Microchip PIC32MX3xx4xx family datasheet DS61168, not measured.
The 100-pin TQFP (PF) package has 0.5 mm pitch and 14x14 mm body. Use 0.25 mm laser-drilled vias in a 0.5 mm grid fan-out under the package, with at least 6 mil trace and 6 mil space for signal routing on the outer two layers. The TQFP-100 variant has no exposed pad, simplifying thermal layout compared to QFN packages. A four-layer stackup with a continuous ground plane on layer 2 is recommended for USB differential pair impedance control (90 ohm differential).
Do not enable the USB peripheral without a valid 48 MHz USB PLL reference - the device will latch up the USB bus. Do not operate VDD below 2.3V when USB is enabled; this violates the USB PHY analog supply spec. Do not rely on the 16 KB USB RAM as general SRAM in firmware unless USB is permanently disabled. The CTMU peripheral requires calibration per part for mTouch accuracy - do not assume default constants. Estimated: based on common PIC32MX3xx silicon errata (DS80344).
At 80 MHz with all peripherals enabled, the TQFP-100 (PF) dissipates approximately 220 mW worst-case (theta_JA roughly 50 C/W for 4-layer JEDEC EIA/JESD51 test board). This translates to a 11 C junction rise at 25 C ambient, well within the 125 C absolute maximum. In sealed enclosures above 60 C ambient, derate by 10 mW per 5 C or reduce peripheral count to maintain reliability. Estimated: not measured on this exact board, derived from family datasheet power budget.
Informations de conformité
RoHS and lead-free per Microchip product page. Not AEC-Q100 qualified - choose PIC32MK or dsPIC33AEC families for automotive. Halogen-free status not explicitly stated in distributor data.
