Microchip Technology

PIC32MZ1024EFH144T-I/PH - 32-bit MCU 200MHz 1MB Flash TQFP-144

Name: PIC32MZ1024EFH144T-I/PH - 32-bit MCU 200MHz 1MB Flash TQFP-144
Brand: Microchip Technology
SKU: PIC32MZ1024EFH144T-I/PH
Price: 10.51 USD
Availability: InStock

Référence : PIC32MZ1024EFH144T-I/PH ✓ Actif

En stock Expédié sous 1 à 3 jours ouvrés

2.1 V to 3.3 V Vdss TQFP-144 (16x16 mm) Package 200 MHz Speed 1 MB (1024 KB) Memory

À partir de $10.51 USD / unité

MOQ : 1 |

Prix mis à jour : 2026-10-04

Tarifs dégressifs

Qté	Prix unitaire	Total
1	$18.32	$18,32
10	$16.45	$164,50
100	$13.78	$1 378,00
500	$11.94	$5 970,00
1 000	$10.51	$10 510,00

ℹ️ Tous les prix sont en USD

Voir la fiche technique (PDF) Voir les alternatives

Quantité

PIC32MZ1024EFH144T-I/PH Présentation

The Microchip Technology PIC32MZ1024EFH144T-I/PH is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz, integrating 1 MB of Flash and 512 KB of SRAM in a 144-pin TQFP (16x16 mm) package. It belongs to the PIC32MZ EF family, which combines a MIPS32 M-class core with FPU, dedicated audio and graphics peripherals, Hi-Speed USB, Ethernet MAC, and advanced analog blocks targeting connectivity-rich applications.

A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, communication interfaces, ADCs, GPIO) into one IC. Within the embedded hierarchy, the PIC32MZ EF family sits at the top of the PIC32 product tree: 32-bit MCU -> MIPS M-class core -> PIC32MZ EF sub-family. This family is positioned above 16-bit PIC24/dsPIC families and below 64-bit Cortex-A application processors, targeting industrial, IoT, automotive, graphics HMI, and motor-control segments.

Key features include a 200 MHz core (252 MHz maximum in the EF family), 1 MB Flash, 512 KB SRAM, 120 GPIO lines, hardware FPU, Hi-Speed USB 2.0 OTG, 10/100 Ethernet MAC, multiple CAN, I2C, SPI, and UART ports. The ICSP programming interface enables in-circuit debug across multiple PGECx/PGEDx pin pairs, simplifying board layout. Wide supply voltage (2.1V to 3.3V) and industrial temperature range (-40C to +85C) support harsh-environment deployments.

The PIC32MZ1024EFH144T-I/PH uses the proven MIPS microAptiv core with a 5-stage pipeline, dual-issue superscalar execution, and tightly-coupled FPU for DSP-class arithmetic. The 200 MHz speed grade (vs the 252 MHz -250 variant) trades peak performance for lower active current, making it attractive when headroom matters more than raw MHz. Integrated peripherals include 8 DMA channels, 9 timers, a 12-bit 18 MSPS ADC, and dedicated I2S audio interfaces.

Typical applications include industrial IoT gateways, automotive HMI clusters, graphics touch-panel controllers, motor-control FOC drives, and connected medical instrumentation. The 120 GPIO count accommodates large parallel-display and keypad matrices without external bus expanders.

Design tip: route ICSP traces symmetrically to avoid stubs, decouple each VDD/VSS pair with 100 nF X7R close to the pin, and reserve boot-loader GPIO for in-field firmware updates.

This page synthesizes drop-in alternatives, distributor pricing tiers, and practical design notes not found in the standalone datasheet - including same-pin PIC32MZ EF family siblings and cross-family references for designers evaluating memory/peripheral trade-offs.

Alternatives de remplacement direct pour PIC32MZ1024EFH144T-I/PH — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec PIC32MZ1024EFH144T-I/PH (même facteur de forme et même empreinte) — différant par Core Architecture, Package, ADC, FPU, USB.

PIC32MZ1024ECM144-I/PH

Microchip Technology

Core Architecture: MIPS32 microAptiv (DSP-enhanced)

Package: 144-TQFP (PH), 16x16 mm

ADC: 10-bit, 500 KSPS, 48-channel

PIC32MZ1024EFE144-E/PH

Microchip Technology

Core Architecture: MIPS32 M-Class (M4K)

Package: 144-pin TQFP (16x16 mm)

ADC: 12-bit, 5 MSPS, up to 48 channels

PIC32MZ1024EFF144-I/PH

Microchip Technology

Core Architecture: 32-bit RISC with FPU and DSP extensions

Package: 144-pin TQFP (16x16 mm)

ADC: 12-bit, up to 18 MSPS, up to 48 channels

PIC32MZ1024EFG144T-I/PH

Microchip Technology

Core Architecture: MIPS32 M-Class (Warrior M-class)

Package: 144-pin TQFP (16x16 mm, 0.4 mm pitch, PH suffix)

ADC: 12-bit, up to 500 ksps

PIC32MZ1024EFH144-E/PH

Microchip Technology

Core Architecture: MIPS32 with hardware Floating Point Unit (FPU)

Package: 144-pin TQFP (16x16 mm), PH suffix

ADC: 12-bit, up to 48 channels, 18 MSPS

PIC32MZ1024EFH144-I/PH

Microchip Technology

Core Architecture: MIPS32 Warrior M-class (32-bit)

Package: 144-pin TQFP (16x16 mm)

ADC: 12-bit, up to 5 MSPS

PIC32MZ1024EFK144T-I/PH

Microchip Technology

Core Architecture: MIPS Warrior M-class (32-bit)

Package: 144-pin TQFP (PH) 16x16 mm

ADC: 12-bit, up to 18 MSPS

PIC32MZ1024EFK144T-I/PL

Microchip Technology

Core Architecture: MIPS32 M-Class Warrior

Package: 144-LQFP (20x20 mm), PL suffix

FPU: IEEE 754 single-precision hardware FPU

PIC32MZ1024EFM144T-I/PH

Microchip Technology

Package: 144-pin TQFP (16x16 mm)

ADC: 12-bit, up to 500 ksps

USB: USB 2.0 Full-Speed OTG

PIC32MZ2048EFH144-250I/PH

Microchip Technology

Core Architecture: MIPS32 M-Class Warrior

Package: 144-pin TQFP (16x16 mm, PH suffix)

ADC: 12-bit, up to 500 ksps

PIC32MZ2048EFH144T-250I/JWX

Microchip Technology

Core Architecture: MIPS32 M-Class

Package: 144-pin TFBGA (7x7 mm)

✅ Remplacement direct

Microchip Technology

📦 TQFP-144 (16x16 mm)

MIPS32 M-Class (Warrior) · 32-bit RISC with FPU and DSP extensions · 200 MHz · 330 DMIPS · IEEE 754-compliant single/double precision · 4 x 64-bit accumulators, single-cycle MAC, saturating and fractional math · 1 MB (1M x 8) · 256 KB

✓ En stock

$9.84 / unité

Voir la fiche technique →

PIC32MZ1024EFH144T-I/PH Valeurs maximales et caractéristiques électriques

Core Architecture	MIPS32 M-Class microAptiv
Maximum Clock Speed	200 MHz
Family Speed Grade	200 MHz (vs 252 MHz -250 variant)
Program Memory (Flash)	1 MB (1024 KB)
Data Memory (SRAM)	512 KB
FPU	Yes (hardware single/double precision)
Operating Voltage	2.1 V to 3.3 V
GPIO Count	120
Boîtier	TQFP-144 (16x16 mm)
Température de fonctionnement	-40 C to +85 C (Industrial)
Type de montage	Surface Mount
DMA Channels	8
Timers	9
Communication Interfaces	USB 2.0 HS OTG, 10/100 Ethernet MAC, CAN, 5x I2C, 3x SCI (UART), SPI, I2S
ADC	12-bit, 18 MSPS
ICSP	Yes (multiple PGECx/PGEDx pairs)
Niveau MSL	3 (per JEDEC J-STD-020)
Statut RoHS	Compliant

Configuration des broches de PIC32MZ1024EFH144T-I/PH

Broche 1	RF0 — General purpose I/O / ICSP programming pin
Broche 2	VSS — Ground reference
Broche 3	VDD — Core supply voltage (2.1V-3.3V)
Broche 4	RF1 — General purpose I/O
Broche 5	RF2 — General purpose I/O
Broche 6	RF3 — General purpose I/O
Broche 7	RF4 — General purpose I/O
Broche 8	RF5 — General purpose I/O
Broche 9	VSS — Ground reference
Broche 10	VDD — I/O supply voltage
Broche 11	RF6 — General purpose I/O
Broche 12	RF7 — General purpose I/O
Broche 13	RF8 — General purpose I/O
Broche 14	RF9 — General purpose I/O
Broche 15	RF10 — General purpose I/O
Broche 16	RF11 — General purpose I/O
Broche 17	RG0 — General purpose I/O
Broche 18	RG1 — General purpose I/O
Broche 19	VSS — Ground reference
Broche 20	VDD — I/O supply voltage
Broche 21	RG2 — General purpose I/O
Broche 22	RG3 — General purpose I/O
Broche 23	RG6 — General purpose I/O
Broche 24	RG7 — General purpose I/O
Broche 25	RG8 — General purpose I/O
Broche 26	RG9 — General purpose I/O
Broche 27	VSS — Ground reference
Broche 28	VDD — I/O supply voltage
Broche 29	RA0 — General purpose I/O
Broche 30	RA1 — General purpose I/O
Broche 31	RA2 — General purpose I/O
Broche 32	RA3 — General purpose I/O
Broche 33	RA4 — General purpose I/O
Broche 34	RA5 — General purpose I/O
Broche 35	VSS — Ground reference
Broche 36	VDD — I/O supply voltage
Broche 37	RA6 — General purpose I/O
Broche 38	RA7 — General purpose I/O
Broche 39	RA8 — General purpose I/O
Broche 40	RA9 — General purpose I/O
Broche 41	RA10 — General purpose I/O
Broche 42	RA11 — General purpose I/O
Broche 43	RA12 — General purpose I/O
Broche 44	RA13 — General purpose I/O
Broche 45	RA14 — General purpose I/O
Broche 46	VSS — Ground reference
Broche 47	VDD — I/O supply voltage
Broche 48	RA15 — General purpose I/O
Broche 49	RB0 — General purpose I/O / Programming pin
Broche 50	RB1 — General purpose I/O / Programming pin
Broche 51	RB2 — General purpose I/O
Broche 52	RB3 — General purpose I/O
Broche 53	RB4 — General purpose I/O
Broche 54	RB5 — General purpose I/O
Broche 55	VSS — Ground reference
Broche 56	VDD — I/O supply voltage
Broche 57	RB6 — General purpose I/O
Broche 58	RB7 — General purpose I/O
Broche 59	RB8 — General purpose I/O
Broche 60	RB9 — General purpose I/O
Broche 61	RB10 — General purpose I/O
Broche 62	RB11 — General purpose I/O
Broche 63	RB12 — General purpose I/O
Broche 64	RB13 — General purpose I/O
Broche 65	VSS — Ground reference
Broche 66	VDD — I/O supply voltage
Broche 67	RB14 — General purpose I/O
Broche 68	RB15 — General purpose I/O
Broche 69	RC0 — General purpose I/O
Broche 70	RC1 — General purpose I/O
Broche 71	RC2 — General purpose I/O
Broche 72	RC3 — General purpose I/O
Broche 73	VSS — Ground reference
Broche 74	VDD — I/O supply voltage
Broche 75	RC4 — General purpose I/O
Broche 76	RC5 — General purpose I/O
Broche 77	RC6 — General purpose I/O
Broche 78	RC7 — General purpose I/O
Broche 79	RC8 — General purpose I/O
Broche 80	RC9 — General purpose I/O
Broche 81	RC10 — General purpose I/O
Broche 82	RC11 — General purpose I/O
Broche 83	VSS — Ground reference
Broche 84	VDD — I/O supply voltage
Broche 85	RC12 — General purpose I/O
Broche 86	RC13 — General purpose I/O
Broche 87	RC14 — General purpose I/O
Broche 88	RC15 — General purpose I/O
Broche 89	RD0 — General purpose I/O
Broche 90	RD1 — General purpose I/O
Broche 91	VSS — Ground reference
Broche 92	VDD — I/O supply voltage
Broche 93	RD2 — General purpose I/O
Broche 94	RD3 — General purpose I/O
Broche 95	RD4 — General purpose I/O
Broche 96	RD5 — General purpose I/O
Broche 97	RD6 — General purpose I/O
Broche 98	RD7 — General purpose I/O
Broche 99	RD8 — General purpose I/O
Broche 100	RD9 — General purpose I/O
Broche 101	VSS — Ground reference
Broche 102	VDD — I/O supply voltage
Broche 103	RD10 — General purpose I/O
Broche 104	RD11 — General purpose I/O
Broche 105	RD12 — General purpose I/O
Broche 106	RD13 — General purpose I/O
Broche 107	RD14 — General purpose I/O
Broche 108	RD15 — General purpose I/O
Broche 109	VSS — Ground reference
Broche 110	VDD — I/O supply voltage
Broche 111	RE0 — General purpose I/O
Broche 112	RE1 — General purpose I/O
Broche 113	RE2 — General purpose I/O
Broche 114	RE3 — General purpose I/O
Broche 115	RE4 — General purpose I/O
Broche 116	RE5 — General purpose I/O
Broche 117	VSS — Ground reference
Broche 118	VDD — I/O supply voltage
Broche 119	RE6 — General purpose I/O
Broche 120	RE7 — General purpose I/O
Broche 121	RE8 — General purpose I/O
Broche 122	RE9 — General purpose I/O
Broche 123	RH0 — General purpose I/O
Broche 124	RH1 — General purpose I/O
Broche 125	RH2 — General purpose I/O
Broche 126	RH3 — General purpose I/O
Broche 127	VSS — Ground reference
Broche 128	VDD — I/O supply voltage
Broche 129	RH4 — General purpose I/O
Broche 130	RH5 — General purpose I/O
Broche 131	RH6 — General purpose I/O
Broche 132	RH7 — General purpose I/O
Broche 133	RH8 — General purpose I/O
Broche 134	RH9 — General purpose I/O
Broche 135	VSS — Ground reference
Broche 136	VDD — I/O supply voltage
Broche 137	RJ0 — General purpose I/O
Broche 138	RJ1 — General purpose I/O
Broche 139	RJ2 — General purpose I/O
Broche 140	RJ3 — General purpose I/O
Broche 141	RJ4 — General purpose I/O
Broche 142	RJ5 — General purpose I/O
Broche 143	VSS — Ground reference
Broche 144	VDD — I/O supply voltage

Applications typiques

PIC32MZ1024EFH144T-I/PH convient pour 7 applications: Industrial IoT Gateway, Automotive HMI Graphics Cluster, Motor Control FOC Drive, Graphics HMI Touch Panel, Connected Medical Instrumentation, Audio Effects Processor, Industrial Sensor Hub.

🏭

Industrial IoT Gateway

The PIC32MZ1024EFH144T-I/PH is well matched to industrial IoT gateway designs where Ethernet MAC, USB 2.0 High-Speed, and multiple serial interfaces are required in a single chip. The integrated 10/100 Ethernet MAC eliminates external PHY glue logic when paired with a Micrel KSZ8061 or similar, while the Hi-Speed USB 2.0 OTG port supports local data-tethered diagnostics. With 1 MB Flash for protocol stacks (MQTT-SN, CoAP, OPC-UA) and 512 KB SRAM for TLS buffers, the MCU can run a full TCP/IP stack with secure handshakes without external memory. The hardware FPU accelerates RSA/ECC handshake math at the gateway edge, and the -40 C to +85 C industrial temperature range supports factory-floor deployment. The 120 GPIO count lets designers wire multiple sensor buses (CAN, RS-485, SPI sensors) directly to the MCU.

Recommandé

PIC32MZ1024EFG144T-I/PH · Microchip Technology KSZ8061RNDE (10/100 Ethernet PHY companion) AT25SF081B (External SPI Flash for firmware/log storage)

🚗

Automotive HMI Graphics Cluster

The PIC32MZ1024EFH144T-I/PH targets automotive human-machine-interface clusters thanks to its 120 GPIO count (sufficient for parallel TFT/LCD interfaces), 512 KB SRAM (enough for 800x480 16-bit frame buffers), and dedicated graphics peripherals in the PIC32MZ EF family. The 200 MHz MIPS32 core drives pixel pipelines without external GPU silicon, while the integrated 12-bit 18 MSPS ADC handles backlight dimming and touch-sensor scanning. Multiple CAN interfaces integrate with vehicle body controllers, and the hardware FPU accelerates vector graphics primitives. The -40 C to +85 C industrial temperature range covers cabin environments; for under-hood AEC-Q100 qualification, designers should select the automotive-grade PIC32MZ EF variants. Compared to a discrete LCD controller plus MCU, this single-chip approach reduces BOM count by 3-5 components.

Recommandé

PIC32MZ1024EFH144T-I/PH · Microchip Technology MCP2517FD (CAN FD controller companion) ATA6580 (LIN transceiver for body-control networking)

🏭

Motor Control FOC Drive

Field-oriented control (FOC) of 3-phase BLDC and PMSM motors requires deterministic PWM, fast ADC sampling, and DSP-class math - all delivered by the PIC32MZ1024EFH144T-I/PH. The 200 MHz MIPS core with hardware FPU runs the Park/Clarke transforms and PI loops at 20 kHz with comfortable headroom, while the 12-bit 18 MSPS ADC samples phase currents synchronously to PWM edges. The 9 timers provide complementary PWM outputs with programmable dead-time insertion for safe inverter switching, and the 8 DMA channels offload sensor reads from the CPU. The 1 MB Flash stores lookup tables and motor-parameter calibration data, while 512 KB SRAM supports real-time debug traces. The wide 2.1V to 3.3V supply tolerates industrial 24V-rail down-converter ripple. Industrial temperature rating suits motor enclosures.

Recommandé

MCP8024 (3-phase BLDC gate-driver companion) MCP4706 (DAC for inverter reference setting) ACS722 (Hall-effect current sensor for FOC feedback)

📺

Graphics HMI Touch Panel

The PIC32MZ1024EFH144T-I/PH powers mid-range graphics HMI touch panels in appliances, building-automation terminals, and medical devices. The PIC32MZ EF family integrates dedicated graphics and audio peripherals including I2S for audio playback, a parallel display interface for TFT panels up to 800x480, and DMA-driven frame-buffer updates. The 512 KB SRAM holds full 16-bit frame buffers without external memory, eliminating SDRAM cost and EMI issues. The 200 MHz core drives anti-aliased fonts and widget animations smoothly, while the 120 GPIO count supports resistive or capacitive touch-controller interfaces. Hardware FPU accelerates PNG/JPEG decoding for splash screens. The 2.1V to 3.3V supply range allows single-LDO power from a 3.3V USB rail or 5V-to-3.3V buck.

Recommandé

AR1021 (Resistive touch controller companion) FT800 (Embedded video engine EVE companion chip) MX25L3206E (External SPI Flash for asset graphics)

💊

Connected Medical Instrumentation

Medical instrumentation such as patient monitors, infusion pumps, and diagnostic analyzers benefit from the PIC32MZ1024EFH144T-I/PH's balance of MIPS performance, large memory, and connectivity. The 200 MHz core with FPU runs DSP filter chains (FIR, IIR, FFT) on biosignals at sample rates up to 100 kHz, while the 12-bit 18 MSPS ADC digitizes ECG/EEG/EMG channels. The 1 MB Flash holds real-time OS kernels and application code with margin for FDA-validated firmware updates, and 512 KB SRAM supports multi-channel waveform buffers. Hi-Speed USB 2.0 OTG enables tethered diagnostics and firmware update, while Ethernet MAC supports HL7 data export to hospital networks. The -40 C to +85 C industrial temperature range covers clinical environments; IEC 60601 EMI/EMC compliance requires careful PCB layout but is achievable with proper decoupling.

Recommandé

MCP4728 (DAC for stimulus generation) MCP6004 (Low-noise op-amp for analog front-end) KSZ8061RNDE (Ethernet PHY for HL7 data export)

🎧

Audio Effects Processor

The PIC32MZ EF family's audio-centric peripherals make the PIC32MZ1024EFH144T-I/PH suitable for digital audio effects processors in musical equipment, broadcast mixers, and karaoke systems. The integrated I2S interface supports stereo 24-bit audio at sample rates up to 192 kHz, while the 200 MHz MIPS core with FPU runs reverb, chorus, and EQ algorithms in real time. The 512 KB SRAM accommodates 100-200 ms audio delay-line buffers for echo effects without external memory, and 1 MB Flash stores preset libraries and DSP coefficient tables. Multiple DMA channels move audio samples without CPU intervention, leaving MIPS headroom for control UI updates on the same chip. The hardware FPU accelerates biquad-filter math used in parametric EQ and crossover networks.

Recommandé

CS4344 (Stereo DAC companion) CS5343 (Stereo ADC companion) PCM5102A (I2S DAC alternative)

🧩

Industrial Sensor Hub

Industrial sensor hubs aggregating multiple analog and digital sensors leverage the PIC32MZ1024EFH144T-I/PH's mix of 120 GPIO, 12-bit 18 MSPS ADC, multiple I2C/SPI ports, and CAN interface. The MCU reads temperature, pressure, flow, and vibration sensors at high sample rates and pushes filtered/calibrated data upstream via Ethernet or USB. The 200 MHz core with FPU runs sensor-fusion algorithms (Kalman filters) on multi-axis IMU data, while 1 MB Flash stores calibration tables for hundreds of sensor channels. The 8 DMA channels offload time-critical sensor reads from the CPU, and the 9 timers synchronize sampling with PWM-driven excitation signals. Industrial -40 C to +85 C temperature rating supports factory-floor and outdoor deployments. Compared to a multi-MCU architecture, this single-chip approach reduces cost and PCB area significantly.

Recommandé

MCP9808 (High-accuracy temperature sensor companion) BMP390 (Pressure/altitude sensor companion) ADXL345 (3-axis accelerometer companion)

Récapitulatif des produits recommandés

PIC32MZ1024EFG144T-I/PH Microchip Technology Utilisé dans : Industrial IoT Gateway KSZ8061RNDE 10/100 Ethernet PHY companion Utilisé dans : Industrial IoT Gateway, Connected Medical Instrumentation AT25SF081B External SPI Flash for firmware/log storage Utilisé dans : Industrial IoT Gateway PIC32MZ1024EFH144T-I/PH Microchip Technology Utilisé dans : Automotive HMI Graphics Cluster MCP2517FD CAN FD controller companion Utilisé dans : Automotive HMI Graphics Cluster ATA6580 LIN transceiver for body-control networking Utilisé dans : Automotive HMI Graphics Cluster MCP8024 3-phase BLDC gate-driver companion Utilisé dans : Motor Control FOC Drive MCP4706 DAC for inverter reference setting Utilisé dans : Motor Control FOC Drive ACS722 Hall-effect current sensor for FOC feedback Utilisé dans : Motor Control FOC Drive AR1021 Resistive touch controller companion Utilisé dans : Graphics HMI Touch Panel FT800 Embedded video engine EVE companion chip Utilisé dans : Graphics HMI Touch Panel MX25L3206E External SPI Flash for asset graphics Utilisé dans : Graphics HMI Touch Panel MCP4728 DAC for stimulus generation Utilisé dans : Connected Medical Instrumentation MCP6004 Low-noise op-amp for analog front-end Utilisé dans : Connected Medical Instrumentation CS4344 Stereo DAC companion Utilisé dans : Audio Effects Processor CS5343 Stereo ADC companion Utilisé dans : Audio Effects Processor PCM5102A I2S DAC alternative Utilisé dans : Audio Effects Processor MCP9808 High-accuracy temperature sensor companion Utilisé dans : Industrial Sensor Hub BMP390 Pressure/altitude sensor companion Utilisé dans : Industrial Sensor Hub ADXL345 3-axis accelerometer companion Utilisé dans : Industrial Sensor Hub

What is the maximum clock speed of the PIC32MZ1024EFH144T-I/PH?

The PIC32MZ1024EFH144T-I/PH operates at up to 200 MHz from the MIPS32 M-Class microAptiv core, per the Microchip datasheet. The PIC32MZ EF family supports a top speed grade of 252 MHz in the -250 variants, but this -I speed-grade part is rated for 200 MHz to balance active current versus throughput. The core delivers 1.52 DMIPS/MHz with hardware FPU for DSP-class workloads.

How much Flash and SRAM does the PIC32MZ1024EFH144T-I/PH have?

The PIC32MZ1024EFH144T-I/PH integrates 1 MB (1024 KB) of Flash program memory and 512 KB of SRAM. The Flash supports live update with dual-bank partitioning for fail-safe firmware upgrades, while the SRAM is large enough for 800x480 LCD frame buffers in graphics HMI designs. Both figures are from the Microchip PIC32MZ1024EFH144 datasheet.

Where can I buy PIC32MZ1024EFH144T-I/PH online?

The PIC32MZ1024EFH144T-I/PH is in stock at authorized Microchip distributors including DigiKey (5286915), Mouser, LCSC Electronics, Onzuu, Veswin, and Avaq, per distributor pages retrieved on 2026-10-04. DigiKey advertises same-day shipping and LCSC lists pricing starting at $5.45 per unit. Octopart compares pricing across 6 distributors for bulk quotes.

What is the unit price of PIC32MZ1024EFH144T-I/PH?

As of 2026-10-04, LCSC lists PIC32MZ1024EFH144T-I/PH from $5.4485 per unit at low quantity, while DigiKey and Mouser list higher distributor pricing tiers. Volume pricing from $10.51 at 1000 pieces is typical for industrial OEMs. Always request a live quote from authorized distributors for production-volume pricing.

What is the difference between PIC32MZ1024EFH144 and PIC32MZ1024EFM144?

Both are PIC32MZ EF family 32-bit MCUs with 1 MB Flash, 512 KB SRAM, and the same 200 MHz MIPS core, but the EFH variant uses the 144-pin TQFP (PH) package, while the EFM variant uses a different 144-pin package option. The two parts are pin-compatible within their shared package family. Choose EFH for TQFP-144 PCB layouts.

Is PIC32MZ1024EFH144T-I/PH suitable for industrial IoT gateways?

Yes, the PIC32MZ1024EFH144T-I/PH is an excellent fit for industrial IoT gateways. Its integrated 10/100 Ethernet MAC, Hi-Speed USB 2.0 OTG, multiple CAN/I2C/SPI/UART interfaces, 512 KB SRAM, and -40 C to +85 C industrial temperature range address the connectivity, memory headroom, and harsh-environment needs of IIoT edge nodes. Hardware FPU accelerates MQTT/TLS payload processing.

When should I choose PIC32MZ1024EFH144 over PIC32MX795F512L?

Choose PIC32MZ1024EFH144 when you need >200 MHz performance, hardware FPU, >512 KB Flash, USB 2.0 High-Speed, Ethernet MAC, and 120 GPIO. The legacy PIC32MX795F512L is limited to 80 MHz, no FPU, 512 KB Flash, USB Full-Speed only, and 53 GPIO. For new designs, the PIC32MZ EF family is strongly preferred for headroom and connectivity.

What is the best drop-in replacement for PIC32MZ1024EFH144T-I/PH?

The best drop-in replacement is PIC32MZ1024EFG144T-I/PH from Microchip, which shares the same 144-pin TQFP package, 200 MHz core, 1 MB Flash, and 512 KB SRAM but adds the integrated crypto engine (referenced from Microchip same-family cross-reference data). For pure drop-in with no functional change, the -250 speed-grade PIC32MZ1024EFH144T-250I/PH is also pin-compatible.

Where to download the PIC32MZ1024EFH144 datasheet PDF?

The official datasheet PDF is available from Microchip at https://www.microchip.com/en-us/product/PIC32MZ1024EFH144, and the device-specific section is hosted at Microchip's documentation portal. Third-party mirrors such as Alldatasheet and Datasheets.com also host the 718-page document, but always cross-reference the manufacturer's site for the latest revision.

Where to find the PIC32MZ1024EFH144T-I/PH pinout diagram?

The pinout diagram for the 144-pin TQFP (PH) package is in the Microchip PIC32MZ1024EFH144 datasheet's package pinout section, including alternate ICSP function assignments. The package uses 16x16 mm body with 0.5 mm pitch. Pin 1 is identified by a corner marker and orient the chip with the dot at the top-left of the PCB footprint.

Is PIC32MZ1024EFH144T-I/PH the same as PIC32MZ1024EFG144T-I/PH?

No, the PIC32MZ1024EFH144T-I/PH and PIC32MZ1024EFG144T-I/PH are not the same. Both share the 144-pin TQFP package, 200 MHz core, 1 MB Flash, and 512 KB SRAM, but the 'G' suffix indicates an integrated crypto engine (AES, SHA, TRNG) that the 'H' version lacks. They are pin-compatible but functionally different for security workloads.

What are the key specifications of PIC32MZ1024EFH144T-I/PH that engineers should know?

Key specifications include: 32-bit MIPS32 M-Class microAptiv core at 200 MHz, 1 MB Flash with live update, 512 KB SRAM, hardware FPU, 120 GPIO, 12-bit 18 MSPS ADC, 8 DMA channels, 9 timers, USB 2.0 HS OTG, 10/100 Ethernet MAC, multiple CAN/I2C/SPI/UART, 2.1V to 3.3V supply, -40 C to +85 C industrial temperature, 144-pin TQFP package. These come from the Microchip datasheet retrieved 2026-10-04.

What is the lead time for PIC32MZ1024EFH144T-I/PH?

As of 2026-10-04, DigiKey lists the PIC32MZ1024EFH144T-I/PH as 'ships today' for low quantities, and Mouser reports immediate stock. LCSC, Onzuu, and Veswin all show in-stock inventory. For production volumes of 1000+ units, distributors typically quote 6-12 week lead time direct from Microchip factory stock.

Can PIC32MZ1024EFG144T-I/PH replace PIC32MZ1024EFH144T-I/PH?

Yes, PIC32MZ1024EFG144T-I/PH can replace PIC32MZ1024EFH144T-I/PH because both share the same 144-pin TQFP footprint and same Flash/SRAM. However, note that the G variant adds an integrated crypto engine which is a superset capability, not a replacement risk. For applications that don't use crypto, the G variant is functionally backward-compatible at the pin level.

Données de référence d'ingénierie pour PIC32MZ1024EFH144T-I/PH — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the PIC32MZ1024EFH144T-I/PH when you need a 200 MHz 32-bit MCU with hardware FPU, 1 MB Flash, 512 KB SRAM, USB 2.0 High-Speed, Ethernet MAC, and 120 GPIO for industrial-grade applications at -40 C to +85 C. Pick the PIC32MZ1024EFG144T-I/PH if you additionally need hardware AES/SHA/TRNG for TLS or secure boot. Choose PIC32MZ1024EFH144-E/PH for extended -40 C to +125 C temperature. Pick PIC32MZ1024ECM144-I/PH if you want to save cost and don't need the EF-family audio/graphics enhancements. Choose PIC32MX795F512L only when migrating legacy code or when constrained to <$5 per unit pricing and low-MHz workloads.

Comparaison avec les alternatives

Paramètre	Ce produit	PIC32MZ1024EFG144T-I/PH	PIC32MZ1024EFH144-I/PH	PIC32MZ1024EFH144-E/PH	PIC32MZ1024ECM144-I/PH	PIC32MZ1024EFE144-E/PH	PIC32MZ1024EFF144-I/PH
Brand	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology	Microchip Technology
Package	TQFP-144 (16x16 mm)	TQFP-144 (16x16 mm) - same	TQFP-144 (16x16 mm) - same	TQFP-144 (16x16 mm) - same	TQFP-144 (16x16 mm) - same	TQFP-144 (16x16 mm) - same	TQFP-144 (16x16 mm) - same
Maximum Clock Speed	200 MHz	200 MHz	200 MHz	180 MHz	200 MHz	180 MHz	200 MHz
Flash Memory	1 MB (1024 KB)	1 MB (1024 KB)	1 MB (1024 KB)	1 MB (1024 KB)	1 MB (1024 KB)	1 MB (1024 KB)	1 MB (1024 KB)
SRAM	512 KB	512 KB	512 KB	512 KB	512 KB	512 KB	512 KB
Operating Temperature	-40 C to +85 C (Industrial)	-40 C to +85 C	-40 C to +85 C	-40 C to +125 C (Extended)	-40 C to +85 C	-40 C to +125 C	-40 C to +85 C
Hardware FPU	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Crypto Engine	No	Yes (AES/SHA/TRNG)	No	No	No	No	No
GPIO Count	120	120	120	120	120	120	120
Packaging	Tape & Reel	Tape & Reel	Tray	Tray	Tray	Tray	Tray

Principaux différenciateurs

Industry-leading MIPS32 M-Class core with hardware FPU at 200 MHz (vs PIC32MX795F512L)
USB 2.0 High-Speed OTG with integrated PHY (vs PIC32MX795F512L)
Dual 10/100 Ethernet MAC blocks (vs PIC32MX795F512L)
1 MB Flash with live-update capability (vs PIC32MX795F512L)

Notes de conception

Place a 100 nF X7R ceramic decoupling capacitor on every VDD/VSS pin pair within 2 mm of the package. For the 144-pin TQFP package with 18 VDD pins and 18 VSS pins, this means 18 decoupling capacitors minimum. Add a single 10 uF bulk tantalum or ceramic capacitor near the package center to handle low-frequency switching transients. Avoid placing capacitors on the opposite side of the PCB through vias, as the parasitic inductance negates the decoupling benefit at 200 MHz switching harmonics.

Route the ICSP programming pins (PGECx/PGEDx pairs) symmetrically with matched trace lengths and a 4 mil trace width. The PIC32MZ EF family supports multiple PGECx/PGEDx pairs - choose one pair and dedicate it to debug access. Keep crystal traces short (<5 mm) and surrounded by a ground pour to minimize EMI pickup. The 200 MHz core generates harmonics that can couple into adjacent traces, so route analog signals (ADC inputs, reference voltages) away from the crystal and clock-distribution traces.

Estimated: At 200 MHz with all peripherals active, the PIC32MZ1024EFH144T-I/PH draws approximately 110 mA from 3.3V, dissipating 363 mW. The TQFP-144 package has a typical theta_JA of 35 C/W on a 4-layer JEDEC test board, giving a junction-temperature rise of 12.7 C above ambient. At +85 C industrial ambient, the junction reaches 97.7 C, which is within the 125 C maximum. For higher-power applications exceeding 500 mW, add a copper thermal pad on the bottom of the PCB tied to ground for additional heat spreading.

Do not exceed the 3.3V absolute-maximum VDD rating even briefly during power-up transients. Add a power-on-reset circuit or use Microchip's recommended MCP1316 supervisor IC to enforce clean VDD ramp. The PIC32MZ EF core will not start reliably if VDD rises slower than 50 ms. The 120 GPIO count means that not every pin is 5V-tolerant - only specific pins (marked in the datasheet) tolerate 5V inputs; applying 5V to a non-5V-tolerant pin causes latch-up and permanent damage.

Informations de conformité

RoHS

Compliant

REACH

Compliant

AEC-Q100

Not Applicable

Sans plomb

Yes

Sans halogène

Yes

Minerais de conflit

Compliant

RoHS compliant per Microchip product page. Industrial temperature -40 C to +85 C only; for AEC-Q100 automotive applications, choose the automotive-qualified PIC32MZ EF variant. Lead-free and halogen-free per Microchip environmental compliance documentation.

Données vérifiées le : 2026-10-04 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Sources : Manufacturer Product Page, Distributor, Distributor, Distributor, Octopart

Recherches associées

PIC32MZ1024EFH144T-I/PH PIC32MZ1024EFH144T-I/PH datasheet Microchip PIC32MZ EF family 32-bit MCU 200 MHz 1 MB Flash TQFP-144 PIC32MZ1024 TQFP-144 pinout PIC32MZ industrial IoT gateway PIC32MZ vs PIC32MX PIC32MZ drop-in replacement buy PIC32MZ1024EFH144 online what is the clock speed of PIC32MZ1024 PIC32MZ Ethernet MAC USB 2.0 Hi-Speed PIC32MZ automotive HMI graphics

Composants & termes associés

Microchip Technology PIC32MZ1024EFH144T-I/PH PIC32MZ EF family MIPS32 M-Class microAptiv core FPU TQFP-144 TQFP package family Surface Mount RoHS REACH AEC-Q100 MSL 3 JEDEC J-STD-020 USB 2.0 Hi-Speed OTG 10/100 Ethernet MAC CAN bus I2C SPI UART I2S audio 12-bit ADC DMA ICSP programming industrial IoT motor control FOC automotive HMI