S9S12GN16F1MTJ - 16KB Flash 16-Bit MCU | NXP S12G
Référence : S9S12GN16F1MTJ ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $7.2 | $7,20 |
| 10 | $6.48 | $64,80 |
| 100 | $5.4 | $540,00 |
| 500 | $4.75 | $2 375,00 |
| 1 000 | $4.2 | $4 200,00 |
S9S12GN16F1MTJ Présentation
What is a 16-bit automotive microcontroller? An MCU (microcontroller unit) is a single-chip computer integrating CPU core, program memory (Flash), data memory (RAM), peripherals (ADC, timers, communication interfaces) and interrupt logic. A 16-bit MCU balances code efficiency and processing throughput for real-time control tasks. The S12 family from NXP sits in the hierarchy: HCS12 core -> 16-bit MCU -> automotive microcontroller -> embedded processor -> semiconductor, optimized for low cost, low pin count, and robust EMC performance.
Key features include an HCS12 CPU at 25 MHz internal bus frequency with a background debug mode (BDM), an integrated 10-bit successive-approximation ADC with up to 14 channels (pin-sharing dependent), up to 14 general-purpose I/O pins, and an on-chip voltage regulator with low-voltage reset. The S12G architecture uses a unified Flash array with security lock bits and a hardware ECC for in-application reprogrammability.
The S12G is an optimized, 16-bit microcontroller product line focused on low cost, high performance and low pin count. Per NXP product page, the S12G is suited for generic automotive and industrial applications requiring CAN or LIN/SAE J2602 communication, retaining code-size efficiency while supporting CAN, SCI, SPI, and I2C interfaces. Multiple S12G die options share the same peripheral set, simplifying firmware portability.
Typical applications include automotive body controllers, CAN/LIN nodes, HVAC control modules, seat and mirror controllers, sensor interfaces, industrial PLC I/O expansion, low-end motor control and appliance control panels. The wide temperature range and AEC-Q100 qualification make the S9S12GN16F1MTJ suited for under-hood and chassis-adjacent ECUs.
When designing with the S9S12GN16F1MTJ, ensure the supply rail stays within 3.13 V to 5.5 V and place decoupling capacitors (100 nF plus 10 uF bulk) close to VDD/VSS pairs. Use NXP's S12G bootloader for Flash programming via CAN or SCI to avoid dependence on a BDM tool in production.
This page synthesizes distributor availability data, drop-in alternatives within the S12G family, and practical design notes not aggregated on the NXP product page.
Alternatives de remplacement direct pour S9S12GN16F1MTJ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec S9S12GN16F1MTJ (même facteur de forme et même empreinte) — différant par Core, Instruction Set, Package, Program Memory Size, RAM Size.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
S9S12GN16F1CTJ
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
S9S12GN16F1VLFR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
S9S12GN16F1MLFR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S08QG8CFFE
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MC9S08SH4MFK
✅ Remplacement direct✓ En stock
$2.15 / unité
Voir la fiche technique →S9S12GN16F1MTJ Valeurs maximales et caractéristiques électriques
| Manufacturer | NXP Semiconductors |
| Series | S12G (12V1 die) |
| Core | HCS12 (16-bit) |
| Program Memory Size | 16 KB (16K x 8) Flash |
| RAM Size | 1 KB |
| Maximum CPU Frequency | 25 MHz |
| ADC Resolution | 10 bit |
| Largeur du bus de données | 16 bit |
| Number of I/Os | 14 I/O |
| Supply Voltage Range | 3.13 V to 5.5 V (5 V nominal) |
| Température de fonctionnement | -40C to +125C (Automotive Qualified) |
| Boîtier | 20-TSSOP (4.40 mm Width) |
| Style de montage | SMD/SMT |
| Type de montage | Surface Mount |
| Automotive Grade | AEC-Q100 Qualified |
| Communication Interfaces | CAN, SCI (LIN/SAE J2602 capable), SPI, I2C |
| Statut RoHS | Compliant |
Configuration des broches de S9S12GN16F1MTJ
| Broche 1 | VDDR — Internal voltage regulator output (5 V) |
| Broche 2 | VSS — Ground |
| Broche 3 | BKGD — Background Debug Mode |
| Broche 4 | RESET — External reset (active low) |
| Broche 5 | VDD — Supply voltage (3.13 V to 5.5 V) |
| Broche 6 | VSS — Ground |
| Broche 7 | PT0 — General-purpose I/O / IOC0 |
| Broche 8 | PT1 — General-purpose I/O / IOC1 |
| Broche 9 | PT2 — General-purpose I/O / IOC2 |
| Broche 10 | PT3 — General-purpose I/O / IOC3 |
| Broche 11 | PT4 — General-purpose I/O / IOC4 |
| Broche 12 | PT5 — General-purpose I/O / IOC5 |
| Broche 13 | PT6 — General-purpose I/O / IOC6 |
| Broche 14 | PT7 — General-purpose I/O / IOC7 |
| Broche 15 | PAD0 — ADC input channel 0 |
| Broche 16 | PAD1 — ADC input channel 1 |
| Broche 17 | PAD2 — ADC input channel 2 |
| Broche 18 | PAD3 — ADC input channel 3 |
| Broche 19 | TXD — SCI transmit |
| Broche 20 | RXD — SCI receive |
Applications typiques
S9S12GN16F1MTJ convient pour 6 applications: Automotive Body Control Modules, HVAC Climate Control ECUs, Industrial PLC I/O Expansion Modules, Low-End Motor Control and Appliance Panels, Sensor Interface and CAN Gateway Nodes, Automotive Lighting Controllers (DRL / Indicator).
Automotive Body Control Modules
The S9S12GN16F1MTJ's AEC-Q100 qualification, -40C to +125C operating range, and 5 V supply tolerance make it well-suited for automotive body ECUs controlling lighting, wipers, door locks and mirror modules. The integrated CAN and SCI/LIN controllers let the MCU serve as a low-end node handling bus arbitration and sensor polling without an external transceiver beyond the standard physical interface. Compared with a higher-end S12X part, this 16 KB Flash variant keeps cost low for mass-production body modules where firmware fits within 12 KB. The 20-TSSOP footprint simplifies under-dash PCB layouts with thermal margin. Place a 100 nF decoupling capacitor adjacent to each VDD pin and a 10 uF bulk capacitor on the main supply rail per the NXP S12G hardware design guide.
Recommandé
HVAC Climate Control ECUs
The S9S12GN16F1MTJ fits HVAC climate-control ECUs where multiple temperature sensors, fan drivers, and actuators must be sampled and controlled in real time. The 10-bit ADC with up to 14 channels handles thermistor inputs and potentiometer feedback from panel controls, while PWM timers drive blower motor FETs and mode doors. AEC-Q100 qualification supports under-dash mounting adjacent to heat sources. CAN connectivity integrates with the vehicle body network so climate commands flow from the HMI controller to this node. Compared with a discrete analog control board, an S12G-based design reduces PCB area and BOM count.
Recommandé
Industrial PLC I/O Expansion Modules
The S9S12GN16F1MTJ suits industrial PLC digital and analog I/O expansion slices that sit on a backplane CAN or RS-485 link. Its 16 KB Flash accommodates protocol stacks such as CANopen or Modbus plus application logic, and the wide 3.13 V to 5.5 V supply range allows 5 V backplane rails directly. The 10-bit ADC handles 0-10 V analog inputs with external scaling, and up to 14 GPIO pins drive relay coils and opto-isolated outputs. Compared with 8-bit MCUs in this role, the 16-bit HCS12 core gives higher loop-bandwidth for fast I/O scanning without a real-time OS.
Recommandé
Low-End Motor Control and Appliance Panels
The S9S12GN16F1MTJ targets appliance control boards for washing machines, dishwashers, and refrigerator compressors where brushed DC or single-phase induction motors require PWM commutation. The 25 MHz HCS12 core and PWM timers generate 20 kHz drive signals, while the 10-bit ADC reads back current and voltage for basic protection. The wide temperature range accommodates under-cabinet mounting near motor heat. Compared with a dedicated motor-control DSP, this S12G variant keeps cost and code complexity low for cost-sensitive appliance platforms while still offering CAN/LIN connectivity for smart appliances.
Recommandé
Sensor Interface and CAN Gateway Nodes
The S9S12GN16F1MTJ serves as a low-cost sensor-hub node aggregating multiple analog and digital sensors and forwarding pre-processed data over CAN. The 10-bit ADC samples thermistor, pressure, and position sensors, while SCI (LIN-capable) interfaces communicate with local sensors. The 16-bit HCS12 core performs simple averaging and threshold logic in firmware, offloading higher-level ECUs. AEC-Q100 qualification supports deployment in chassis-adjacent areas such as wheel-speed or steering-angle sensor clusters. Compared with a fully integrated sensor IC, this MCU offers flexibility for evolving sensor configurations.
Recommandé
Automotive Lighting Controllers (DRL / Indicator)
The S9S12GN16F1MTJ drives LED daytime running lights, indicators, and tail-lamp arrays in compact lamp ECUs. The 14 GPIO pins drive N-channel FET gates for high-side or low-side LED strings, and the 10-bit ADC monitors string current for open-LED diagnostics. The wide 5 V tolerance and AEC-Q100 qualification suit under-body lamp modules exposed to temperature swings and load-dump transients. Compared with an entry-level 8-bit MCU in this role, the 16-bit HCS12 core allows advanced dimming curves, fault logging, and LIN-commissioned lighting sequences.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour S9S12GN16F1MTJ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | S9S12GN16F1CTJ | S9S12GN16F1VLFR | S9S12GN16F1MLFR | MC9S08QG8CFFE | MC9S08SH4MFK |
|---|---|---|---|---|---|---|
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP-compatible | 20-TSSOP-compatible |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12 16-bit | HCS12 16-bit | HCS12 16-bit | HCS12 16-bit | S08 8-bit | S08 8-bit |
| Flash | 16 KB | 16 KB | 16 KB | 16 KB | 8 KB | 4 KB |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 512 B | 256 B |
| Max CPU Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 20 MHz | 20 MHz |
| Operating Voltage | 3.13 V to 5.5 V | Similar range | Wider tolerance variant | Similar range | 1.8 V to 3.6 V | 2.1 V to 3.6 V |
| Automotive Qualified (AEC-Q100) | Yes | Yes | Yes | Yes | Varies by grade | Varies by grade |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| GPIO Count | 14 | 14 | 14 | 14 | Varies | Varies |
Principaux différenciateurs
- Lowest-cost S12G variant with 16 KB Flash in TSSOP-20 (vs S9S12GN32F1MLC)
- AEC-Q100 qualified vs industrial-only 8-bit S08 parts (vs MC9S08QG8CFFE)
- Integrated CAN + SCI/LIN in a 20-TSSOP footprint (vs MC9S08SH4MFK)
Notes de conception
Place a 100 nF ceramic decoupling capacitor within 5 mm of every VDD pin, and a single 10 uF bulk capacitor on the main 5 V rail. The internal 5 V VDDR regulator that powers the core logic must have its own 2.2 uF bypass capacitor on VDDR per the NXP S12G hardware design guide. Estimated: 5 V x 25 mA core current draw at 25 MHz = ~125 mW total power dissipation.
Route the BKGND (background debug mode) signal to a test pad for factory programming and field firmware updates. Keep the BKGND trace short and away from noisy PWM or relay-drive signals. Use a four-layer PCB with a dedicated ground plane beneath the MCU to maintain EMC performance to automotive OEM standards.
Do not leave the RESET pin floating; a missing pull-up causes erratic resets and BDM-lockout conditions. Configure the watchdog timer (COP) for NBOOT modes and enable periodic refresh in firmware to recover from code runaway. Verify the input voltage stays within 3.13 V to 5.5 V with a 5 V nominal rail; lower voltages may cause Flash programming failures during in-application updates.
When using the on-chip CAN controller, add a 120 ohm termination resistor at each end of the bus. Place an ESD protection diode array such as NXP PESD1CAN on the CANH and CANL lines near the connector. The 25 MHz internal bus produces harmonics that must be filtered to meet CISPR 25 automotive EMI limits.
Informations de conformité
RoHS and REACH compliant per NXP product page. AEC-Q100 qualified for automotive applications per Mouser product listing. NXP has declared the S12G family end-of-life, so lifecycle_status is eol.
